Buy Used Shell and Tube Heat Exchangers for Sale

Buying used shell and tube heat exchangers through International Process Plants gives chemical manufacturing, pharmaceutical and food processing, oil and gas refining, and HVAC and utility operations access to tube bundles enclosed inside a cylindrical shell, where one process stream travels inside the tubes while a second stream flows across them on the shell side. Manufacturers include VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, and Graham among other OEMs. ▶

Heat transfer surface area in stock spans roughly 0.37 m² (4 ft²) on IPP# 221143 up to 1,050 m² (11,250 ft²) on IPP# 230449. Tube materials in inventory cover Stainless Steel 316, Stainless Steel 304, Stainless Steel Austenitic, Stainless Steel 321, Graphite, Carbon Steel, Tantalum, Titanium, and Hastelloy alloys. Shell construction is dominated by Carbon Steel, with Stainless Steel 316 and 304, Stainless Steel Austenitic, Stainless Steel 321, and Glasslined options also represented. Shell-side and tube-side ratings reach as high as 179.3 bar (2,600 psi) on units such as IPP# 212821. Bundle counts range from a single tube on IPP# 211622 up to 2,819 tubes on IPP# 212739, with bundle lengths reaching 18,000 mm (709 in) on IPP# 222336.

IPP carries BEM, AEU, AKU, CFT, FTA, and DEU model designations across multiple OEMs. Horizontal, vertical, and inclined orientations are all stocked, with horizontal mountings being the most common. Many units are rated for vacuum service on the shell or tube side. Condition options run from used through refurbished, unused, and brand new stock. Typical service duties include process heating and cooling, vapor condensing, and energy recovery loops. Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Filters in Stock

1980

Основано с

15

Страны, имеющие офисы

Sices S.p.A Stainless Steel 316L

Использовал

Albach Cembell Hastelloy - Other

Использовал

Perry Products Co. Stainless Steel 304

Использовал

Buy Used Shell and Tube Heat Exchangers by Material

IPP stocks shell and tube heat exchangers across stainless steel, graphite, carbon steel, and specialty alloy options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Shell and Tube Heat Exchangers for Sale

IPP stocks stainless steel shell and tube heat exchangers in 316, 316L, 304, 321, and Austenitic grades. Available from Sices S.p.A, Perry Products Co., AEL Apparatebau GmbH, Graham, Doyle and Roth, and other manufacturers.

Sices S.p.A BEM/1000 x 2700 — 150 m²

Used Sices S.p.A BEM/1000 x 2700 shell and tube heat exchanger with 150 m² (1,600 ft²) of heat transfer surface area and a 762-tube bundle.

Heat Transfer Surface Area:150 m² (1,600 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Tube Number:762 tubes

Длина трубки:2,700 mm (106.3 in) length

Давление в трубе:20 bar (290 psi) tube side

Производитель:Sices S.p.A BEM/1000

Модель:2700

Perry Products Co. AEU — 105 m²

New Perry Products Co. AEU shell and tube heat exchanger built in Stainless Steel 304 with 105.1 m² (1,150 ft²) of heat transfer surface area.

Heat Transfer Surface Area:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Tube Number:197 tubes

Длина трубки:4,250 mm (167.3 in) length

Давление в трубе:75.6 bar (1,100 psi) tube side

Состояние:Новое состояние

AEL Apparatebau BEM — 221 m²

Used AEL Apparatebau GmbH BEM shell and tube heat exchanger built in Stainless Steel 904L with 221 m² (2,400 ft²) of heat transfer surface area.

Heat Transfer Surface Area:221 m² (2,400 ft²) surface area

Tube Material:Stainless Steel 904L tubes

Tube Number:574 tubes

Длина трубки:5,000 mm (196.9 in) length

Давление в трубе:6 bar (87 psi) tube side

Производитель:AEL Apparatebau GmbH

Модель:BEM

Buy Used Graphite Shell and Tube Heat Exchangers for Sale

IPP stocks graphite shell and tube heat exchangers. Available from VICARB, Sigri, Graphite Apparatebau and other manufacturers.

Carbone of America Corp. Graphite

Unused Carbone of America Corp. Graphite heat exchanger.

Материал:Graphite

Состояние:Состояние: новое

Производитель:Carbone of America Corp.

Модель:PYT44-283-18

SGL Carbon Graphite

Used SGL Carbon Graphite heat exchanger.

Материал:Graphite

Состояние:Б/у состояние

Производитель:SGL Carbon

Модель:RS77-1-595.601

Buy Used Carbon Steel Shell and Tube Heat Exchangers for Sale

IPP stocks carbon steel shell and tube heat exchangers. Available from Delta Tee International Inc., Johnson Hunt LTD, Graham and other manufacturers.

Atlas Industrial Carbon Steel

Used Atlas Industrial Carbon Steel heat exchanger.

Материал:Углеродистая сталь

Состояние:Б/у состояние

Western Supply Carbon Steel

Used Western Supply Carbon Steel heat exchanger.

Материал:Углеродистая сталь

Состояние:Б/у состояние

Производитель:Western Supply

Модель:BEM

Buy Used Other Shell and Tube Heat Exchangers for Sale

IPP stocks other shell and tube heat exchangers. Available from DeDietrich, , Tranter-Superchanger and other manufacturers.

Albach Cembell Hastelloy - Other

Used Albach Cembell Hastelloy – Other heat exchanger.

Материал:Хастеллой – Другие

Состояние:Б/у состояние

Производитель:Albach Cembell

Модель:29-129 BEM

Atlas Industrial Hastelloy - Other

Used Atlas Industrial Hastelloy – Other heat exchanger.

Материал:Хастеллой – Другие

Состояние:Б/у состояние

Производитель:Atlas Industrial

Модель:BEM 20-60

Buy Used Shell and Tube Heat Exchangers by Manufacturer

IPP stocks shell and tube heat exchangers from a wide range of manufacturers, with VICARB and Doyle and Roth representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts availability.

Buy Used VICARB Shell and Tube Heat Exchangers for Sale

VICARB is the deepest single-manufacturer position in IPP’s shell and tube heat exchanger inventory. Available VICARB models include FTA 20 and FTA20/24/26 series units, primarily in graphite construction for corrosion-resistant heat transfer applications.

VICARB FTA 20 Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Shell Material:Carbon steel shell

Состояние:Б/у состояние

VICARB FTA20/24/26 Graphite — 12.1 m²

Used VICARB FTA20/24/26 graphite shell and tube heat exchanger with 12.1 m² (130 ft²) of heat transfer surface area.

Heat Transfer Surface Area:12.1 m² (130 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Состояние:Б/у состояние

VICARB Graphite — 23.3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:23.3 m² (250.8 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Состояние:Б/у состояние

Buy Used Doyle and Roth Shell and Tube Heat Exchangers for Sale

Doyle and Roth is the second deepest OEM position in IPP’s shell and tube heat exchanger inventory. Available in stainless steel 304 and Inconel construction for demanding process environments.

Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Shell Material:Stainless Steel 316 shell

Состояние:Б/у состояние

Doyle and Roth Inconel — 8.6 m²

Used Doyle and Roth Inconel shell and tube heat exchanger with 8.6 m² (93 ft²) of heat transfer surface area for high-temperature corrosion-resistant service.

Heat Transfer Surface Area:8.6 m² (93 ft²) surface area

Tube Material:Inconel tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Состояние:Б/у состояние

Doyle and Roth SS 304 — 68.1 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 68.1 m² (733 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:68.1 m² (733 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Состояние:Б/у состояние

Buy Used Shell and Tube Heat Exchangers from Other Manufacturers

Beyond VICARB and Doyle and Roth, IPP stocks shell and tube heat exchangers from Atlas Industrial, Delta Tee International Inc., Graham, Meccanica Sardia, Pfaudler, Johnson Hunt LTD, Manning & Lewis, and other manufacturers. These units span the full range of materials, surface areas, and pressure ratings.

Exchangeurs De Chaleur S.A.G. SS 304 — 16.8 m²

Used Exchangeurs De Chaleur S.A.G. stainless steel 304 shell and tube heat exchanger with 16.8 m² (180.8 ft²) of heat transfer surface area in vertical orientation.

Heat Transfer Surface Area:16.8 m² (180.8 ft²) surface area

Shell Material:Stainless Steel 304 shell

Shell Pressure:6 bar (87 psi) shell side

Tube Number:56 tubes

Длина трубки:1,850 mm (72.8 in) length

Состояние:Б/у состояние

Johnson Hunt LTD BEU Carbon Steel — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger with 6.4 m² (69 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:6.4 m² (69 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:44 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Состояние:Состояние: новое

Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:83.8 m² (902 ft²) surface area

Материал:Stainless steel construction

Ориентация:Горизонтальная ориентация

Производитель:Graham manufacturer

Состояние:Б/у состояние

Buy Used Shell and Tube Heat Exchangers by Condition

IPP stocks shell and tube heat exchangers in multiple condition grades, including used, unused, refurbished/rebuilt, and new. Choose the condition that matches your budget and performance requirements.

Buy Used Shell and Tube Heat Exchangers for Sale

Used shell and tube heat exchangers represent the largest condition category in IPP’s inventory. Available from VICARB, Doyle and Roth, Graham, Atlas Industrial, and other manufacturers in stainless steel, graphite, carbon steel, and specialty alloy construction. Used condition offers the lowest price point while providing OEM-quality vessels.

Used VICARB Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Heat Transfer Surface Area:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Производитель:VICARB

Модель:FTA 20

Состояние:Б/у состояние

Used Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area.

Heat Transfer Surface Area:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Производитель:Doyle and Roth

Состояние:Б/у состояние

Used Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:83.8 m² (902 ft²) surface area

Материал:Stainless steel construction

Ориентация:Горизонтальная ориентация

Производитель:Graham manufacturer

Состояние:Б/у состояние

Buy Unused Shell and Tube Heat Exchangers for Sale

IPP stocks unused shell and tube heat exchangers — units that were manufactured but never placed into service. Johnson Hunt LTD is the most frequently available manufacturer for unused shell and tube heat exchangers in IPP’s inventory. Unused condition provides factory-new performance at reduced lead time compared to ordering new.

Unused Johnson Hunt LTD BEU — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Heat Transfer Surface Area:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Производитель:VICARB

Модель:FTA 20

Состояние:Б/у состояние

Unused Johnson Hunt LTD AEM — 1.58 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.58 m² (17 ft²) of heat transfer surface area.

Heat Transfer Surface Area:1.58 m² (17 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:26 bar (377 psi) shell side

Tube Number:11 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Состояние:Состояние: новое

Unused Johnson Hunt LTD AEM — 1.95 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.95 m² (21 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:1.95 m² (21 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:14 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Состояние:Состояние: новое

Buy Refurbished/Rebuilt Shell and Tube Heat Exchangers for Sale

IPP stocks refurbished and rebuilt shell and tube heat exchangers that have been professionally restored to operational condition. Available from Manning & Lewis, Allegheny Bradford Corp., Le-Carbone Lorraine, and other manufacturers. Refurbished units provide restored performance with documented rebuild history.

Manning & Lewis SS 316 — 65.6 m²

Refurbished/rebuilt Manning & Lewis stainless steel 316 shell and tube heat exchanger with 65.6 m² (706 ft²) of heat transfer surface area.

Heat Transfer Surface Area:65.6 m² (706 ft²) surface area

Shell Material:Нержавеющая сталь 316

Tube Material:Нержавеющая сталь 316

Shell Pressure:10.3 bar (150 psi) shell side

Ориентация:Горизонтальная ориентация

Состояние:Отремонтированное/восстановленное состояние

Allegheny Bradford SS 316L — 1.02 m²

Refurbished/rebuilt Allegheny Bradford Corp. stainless steel 316L shell and tube heat exchanger with 1.02 m² (11 ft²) of heat transfer surface area.

Heat Transfer Surface Area:1.02 m² (11 ft²) surface area

Shell Material:Stainless Steel 304L shell

Shell Pressure:10.3 bar (150 psi) shell side

Tube Material:Stainless Steel 316L tubes

Состояние:Отремонтированное/восстановленное состояние

Le-Carbone Lorraine GM/8 Graphite — 2 m²

Refurbished/rebuilt Le-Carbone Lorraine GM/8 graphite shell and tube heat exchanger with 2 m² (21.5 ft²) of heat transfer surface area.

Heat Transfer Surface Area:2 m² (21.5 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:9 bar (130 psi) shell side

Shell Material:Carbon steel shell

Состояние:Отремонтированное/восстановленное состояние

Buy New Shell and Tube Heat Exchangers for Sale

IPP stocks a select number of new shell and tube heat exchangers for applications requiring factory-new equipment. Available from Timmerman and Perry Products Co. in stainless steel construction.

New Timmerman SS 316L — 197.4 m²

New Timmerman stainless steel 316L shell and tube heat exchanger with 197.4 m² (2,100 ft²) of heat transfer surface area and vertical orientation.

Heat Transfer Surface Area:197.4 m² (2,100 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Shell Pressure:12 bar (174 psi) shell side

Shell Material:Stainless Steel 316 shell

Состояние:Новое состояние

New Perry Products Co. AEU SS 304 — 105.1 m²

New Perry Products Co. AEU stainless steel 304 shell and tube heat exchanger with 105.1 m² (1,150 ft²) of heat transfer surface area.

Heat Transfer Surface Area:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:15.7 bar (228 psi) shell side

Shell Material:Carbon steel shell

Состояние:Новое состояние

Ready to Buy a Used Shell and Tube Heat Exchanger?

Tell us your specifications and requirements. Our team will match your needs against current shell and tube heat exchangers inventory and provide a detailed quote.

Buying Used Shell and Tube Heat Exchangers vs Buying New

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new shell and tube heat exchangers compare across key factors.

Фактор	Использовано из IPP	Новый (OEM)
Стоимость оборудования	Значительная экономия по сравнению с ценой нового OEM-запчастя.	Полная прейскурантная цена OEM
Сроки доставки	Товары в наличии, готовы к отправке.	Увеличенные сроки выполнения заказов (новое производство)
Материалы	Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic	по индивидуальному заказу
Производители	VICARB, Doyle and Roth, Atlas Industrial and others	Один OEM
Воздействие на окружающую среду	Продлевает срок службы оборудования, сокращает количество отходов.	Новое потребление сырья

Advantages of Buying Used Shell and Tube Heat Exchangers from IPP

Компания International Process Plants объединяет более чем 46-летний опыт в области технологического оборудования, почти 150 сотрудников в 15 странах и склад, насчитывающий 15 000 технологических систем и основных элементов оборудования, чтобы поставлять реакторы, готовые к использованию в вашем технологическом процессе.

Значительная экономия затрат

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Немедленная доступность

In-stock shell and tube heat exchangers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Множество OEM-производителей

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc. and other manufacturers. Every unit is an original OEM product with traceable provenance.

Качество и ремонт

Компания IPP предлагает услуги по модернизации через свое подразделение UGE (Universal Glasteel Equipment), основанное в 1995 году, которое располагает запасами более 700 судов и более 2700 запчастей.

Глобальное присутствие в 15 странах

Компания IPP имеет офисы в 15 странах: Бразилии, Канаде, Китае, Чехии, Франции, Германии, Индии, Италии, Мексике, Пакистане, Португалии, Румынии, Турции, Великобритании и США. IPP обслужила более 160 000 клиентов по всему миру.

Полный спектр материалов и технических характеристик

IPP stocks shell and tube heat exchangers across a wide range of specifications to match your process requirements.

How Buying a Used Shell And Tube Heat Exchanger Works

The process of purchasing used shell and tube heat exchangers from IPP follows five steps, from specification to delivery.

1

Предоставьте необходимые документы.

Укажите ваши технические характеристики: производительность, материал конструкции, номинальное давление, температура и область применения. Или просмотрите наш каталог с возможностью поиска.

2

Получение пакета данных

Компания IPP высылает подробный технический паспорт оборудования с указанием характеристик, размеров, отчета о состоянии и фотографий.

3

Осмотрите оборудование

Свяжитесь с IPP, чтобы договориться о визите на место или запросить видеообзор с участием сотрудника IPP в одном из наших офисов по всему миру.

4

Варианты реконструкции

Компания IPP предлагает услуги по модернизации через свое подразделение UGE (более 700 судов, более 2700 запчастей на складе). Для получения подробной информации о дополнительных услугах свяжитесь с компанией IPP.

5

Упаковка и доставка

Компания IPP координирует упаковку, обрешетку, транспортировку и доставку на ваш завод. Доставка по всему миру из офисов в 15 странах.

Industries That Buy Used Shell and Tube Heat Exchangers

IPP supplies used shell and tube heat exchangers to manufacturers across multiple process industries worldwide.

Фармацевтическая

Химическая обработка

Биотехнология

Продукты питания и напитки

Относящийся к окружающей среде

Нефть и газ

Сточные воды

Тонкая химия

Краски и покрытия

Нефтехимия

Frequently Asked Questions About Buying Used Shell and Tube Heat Exchangers

Answers to the most common questions from procurement and operations teams evaluating used shell and tube heat exchangers.

How many shell and tube heat exchangers does IPP have in stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Доступны варианты из нержавеющей стали 304, нержавеющей стали 316 и аустенитной нержавеющей стали. Для получения информации о наличии товара ознакомьтесь с ассортиментом IMS.

What condition grades are available for used shell and tube heat exchangers?

IPP stocks shell and tube heat exchangers in multiple conditions: Used, Unused, Refurbished/Rebuilt, New. Ознакомьтесь с текущим ассортиментом, чтобы узнать о доступных вариантах состояния товара.

Does IPP sell new shell and tube heat exchangers as well as used?

Да. IPP stocks new shell and tube heat exchangers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Для получения подробной информации о новых поступлениях обращайтесь в компанию IPP.

Какие строительные материалы доступны?

IPP stocks shell and tube heat exchangers in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Свяжитесь с компанией IPP, чтобы обсудить требования к материалам для вашего применения.

What manufacturers of shell and tube heat exchangers does IPP stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Просмотрите текущий ассортимент, чтобы увидеть доступных производителей.

How much can I save buying used shell and tube heat exchangers versus new?

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Точная экономия зависит от производителя, мощности, материала конструкции и состояния оборудования. Для получения информации о ценах на конкретные модели обращайтесь в компанию IPP.

How long does it take to receive shell and tube heat exchangers from IPP?

In-stock shell and tube heat exchangers are ready to ship. Дочерняя компания IPP, GPS, занимается поставкой нового оборудования, изготовленного по индивидуальному заказу, со средним сроком поставки 12–16 недель. Компания IPP осуществляет доставку из офисов в 15 странах мира.

Компания IPP занимается доставкой и грузоперевозками?

Компания IPP координирует упаковку, обрешетку, транспортировку и доставку на вашу производственную площадку. Офисы компании расположены в 15 странах. и Более 160 000 клиентов по всему миру., Компания IPP обладает обширным опытом в сфере глобальной логистики оборудования.

Другие типы оборудования от IPP

In addition to shell and tube heat exchangers, IPP stocks equipment across multiple categories for complete process solutions.

Реакторы

Испарители

Танки

Looking for New Shell and Tube Heat Exchangers?

Компания IPP Group поставляет новое оборудование через свою дочернюю компанию Gale Process Solutions (GPS), которая занимается изготовлением оборудования на заказ со средним сроком поставки 12–16 недель. IPP также предлагает оборудование с восстановленным стекловолокном через свое подразделение UGE (Universal Glasteel Equipment).

Ready to Buy Shell and Tube Heat Exchangers?

Компания IPP поставляет качественное технологическое оборудование по всему миру с 1980 года, обслуживая более 160 000 клиентов. Расскажите нам, что вам нужно — наша команда ответит, предоставив информацию о наличии и ценах.