Buy Used Shell and Tube Heat Exchangers for Sale

Buying used shell and tube heat exchangers through International Process Plants gives chemical manufacturing, pharmaceutical and food processing, oil and gas refining, and HVAC and utility operations access to tube bundles enclosed inside a cylindrical shell, where one process stream travels inside the tubes while a second stream flows across them on the shell side. Manufacturers include VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, and Graham among other OEMs. ▶

Heat transfer surface area in stock spans roughly 0.37 m² (4 ft²) on IPP# 221143 up to 1,050 m² (11,250 ft²) on IPP# 230449. Tube materials in inventory cover Stainless Steel 316, Stainless Steel 304, Stainless Steel Austenitic, Stainless Steel 321, Graphite, Carbon Steel, Tantalum, Titanium, and Hastelloy alloys. Shell construction is dominated by Carbon Steel, with Stainless Steel 316 and 304, Stainless Steel Austenitic, Stainless Steel 321, and Glasslined options also represented. Shell-side and tube-side ratings reach as high as 179.3 bar (2,600 psi) on units such as IPP# 212821. Bundle counts range from a single tube on IPP# 211622 up to 2,819 tubes on IPP# 212739, with bundle lengths reaching 18,000 mm (709 in) on IPP# 222336.

IPP carries BEM, AEU, AKU, CFT, FTA, and DEU model designations across multiple OEMs. Horizontal, vertical, and inclined orientations are all stocked, with horizontal mountings being the most common. Many units are rated for vacuum service on the shell or tube side. Condition options run from used through refurbished, unused, and brand new stock. Typical service duties include process heating and cooling, vapor condensing, and energy recovery loops. Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Filters in Stock

1980

Établi depuis

15

Pays ayant des bureaux

Sices S.p.A Stainless Steel 316L

Utilisé

Albach Cembell Hastelloy - Other

Utilisé

Perry Products Co. Stainless Steel 304

Utilisé

Buy Used Shell and Tube Heat Exchangers by Material

IPP stocks shell and tube heat exchangers across stainless steel, graphite, carbon steel, and specialty alloy options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Shell and Tube Heat Exchangers for Sale

IPP stocks stainless steel shell and tube heat exchangers in 316, 316L, 304, 321, and Austenitic grades. Available from Sices S.p.A, Perry Products Co., AEL Apparatebau GmbH, Graham, Doyle and Roth, and other manufacturers.

Sices S.p.A BEM/1000 x 2700 — 150 m²

Used Sices S.p.A BEM/1000 x 2700 shell and tube heat exchanger with 150 m² (1,600 ft²) of heat transfer surface area and a 762-tube bundle.

Surface d'échange thermique :150 m² (1,600 ft²) surface area

Matériau du tube :Stainless Steel 316 tubes

Numéro du tube :762 tubes

Longueur du tube :2,700 mm (106.3 in) length

Pression dans le tube :20 bar (290 psi) tube side

Fabricant:Sices S.p.A BEM/1000

Modèle:2700

Perry Products Co. AEU — 105 m²

New Perry Products Co. AEU shell and tube heat exchanger built in Stainless Steel 304 with 105.1 m² (1,150 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 105,1 m² (1 150 pi²)

Matériau du tube :Stainless Steel 304 tubes

Numéro du tube :197 tubes

Longueur du tube :4,250 mm (167.3 in) length

Pression dans le tube :côté tube 75,6 bar (1 100 psi)

Condition:État neuf

AEL Apparatebau BEM — 221 m²

Used AEL Apparatebau GmbH BEM shell and tube heat exchanger built in Stainless Steel 904L with 221 m² (2,400 ft²) of heat transfer surface area.

Surface d'échange thermique :221 m² (2,400 ft²) surface area

Matériau du tube :Stainless Steel 904L tubes

Numéro du tube :574 tubes

Longueur du tube :5,000 mm (196.9 in) length

Pression dans le tube :6 bar (87 psi) tube side

Fabricant:AEL Apparatebau GmbH

Modèle:BEM

Buy Used Graphite Shell and Tube Heat Exchangers for Sale

IPP stocks graphite shell and tube heat exchangers. Available from VICARB, Sigri, Graphite Apparatebau and other manufacturers.

Carbone of America Corp. Graphite

Unused Carbone of America Corp. Graphite heat exchanger.

Matériel:Graphite

Condition:État inutilisé

Fabricant:Carbone of America Corp.

Modèle:PYT44-283-18

SGL Carbon Graphite

Used SGL Carbon Graphite heat exchanger.

Matériel:Graphite

Condition:État d'occasion

Fabricant:SGL Carbon

Modèle:RS77-1-595.601

Buy Used Carbon Steel Shell and Tube Heat Exchangers for Sale

IPP stocks carbon steel shell and tube heat exchangers. Available from Delta Tee International Inc., Johnson Hunt LTD, Graham and other manufacturers.

Atlas Industrial Carbon Steel

Used Atlas Industrial Carbon Steel heat exchanger.

Matériel:Acier au carbone

Condition:État d'occasion

Western Supply Carbon Steel

Used Western Supply Carbon Steel heat exchanger.

Matériel:Acier au carbone

Condition:État d'occasion

Fabricant:Western Supply

Modèle:BEM

Buy Used Other Shell and Tube Heat Exchangers for Sale

IPP stocks other shell and tube heat exchangers. Available from DeDietrich, , Tranter-Superchanger and other manufacturers.

Albach Cembell Hastelloy - Other

Used Albach Cembell Hastelloy – Other heat exchanger.

Matériel:Hastelloy – Other

Condition:État d'occasion

Fabricant:Albach Cembell

Modèle:29-129 BEM

Atlas Industrial Hastelloy - Other

Used Atlas Industrial Hastelloy – Other heat exchanger.

Matériel:Hastelloy – Other

Condition:État d'occasion

Fabricant:Atlas Industrial

Modèle:BEM 20-60

Buy Used Shell and Tube Heat Exchangers by Manufacturer

IPP dispose d'un stock important d'échangeurs de chaleur à calandre et à tubes provenant de nombreux fabricants, notamment VICARB et Doyle & Roth. Acheter directement auprès du fabricant d'origine garantit la compatibilité avec l'infrastructure existante de l'usine, la disponibilité des pièces de rechange et la facilité d'utilisation pour les opérateurs.

Buy Used VICARB Shell and Tube Heat Exchangers for Sale

VICARB is the deepest single-manufacturer position in IPP’s shell and tube heat exchanger inventory. Available VICARB models include FTA 20 and FTA20/24/26 series units, primarily in graphite construction for corrosion-resistant heat transfer applications.

VICARB FTA 20 Graphite — 6,4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :surface de 6,4 m² (68,9 pi²)

Matériau du tube :Graphite tubes

Pression de l'obus :4 bar (58 psi) shell side

Matériau de la coque :Coque en acier au carbone

Condition:État d'occasion

VICARB FTA20/24/26 Graphite — 12,1 m²

Used VICARB FTA20/24/26 graphite shell and tube heat exchanger with 12.1 m² (130 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 12,1 m² (130 pi²)

Matériau du tube :Graphite tubes

Pression de l'obus :6 bar (87 psi) shell side

Matériau de la coque :Coque en acier au carbone

Condition:État d'occasion

VICARB Graphite — 23,3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :surface de 23,3 m² (250,8 pi²)

Matériau du tube :Graphite tubes

Pression de l'obus :6 bar (87 psi) shell side

Matériau de la coque :Coque en acier au carbone

Condition:État d'occasion

Buy Used Doyle and Roth Shell and Tube Heat Exchangers for Sale

Doyle and Roth is the second deepest OEM position in IPP’s shell and tube heat exchanger inventory. Available in stainless steel 304 and Inconel construction for demanding process environments.

Doyle et Roth SS 304 — 10,4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :surface de 10,4 m² (112 pi²)

Matériau du tube :Stainless Steel 304 tubes

Pression de l'obus :3,4 bar (50 psi) côté coque

Matériau de la coque :Stainless Steel 316 shell

Condition:État d'occasion

Inconel Doyle et Roth — 8,6 m²

Used Doyle and Roth Inconel shell and tube heat exchanger with 8.6 m² (93 ft²) of heat transfer surface area for high-temperature corrosion-resistant service.

Surface d'échange thermique :surface de 8,6 m² (93 pi²)

Matériau du tube :Inconel tubes

Pression de l'obus :10.3 bar (150 psi) shell side

Matériau de la coque :Coque en acier au carbone

Condition:État d'occasion

Doyle et Roth SS 304 — 68,1 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 68.1 m² (733 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :surface de 68,1 m² (733 pi²)

Matériau du tube :Stainless Steel 304 tubes

Pression de l'obus :10.3 bar (150 psi) shell side

Matériau de la coque :Coque en acier au carbone

Condition:État d'occasion

Buy Used Shell and Tube Heat Exchangers from Other Manufacturers

Beyond VICARB and Doyle and Roth, IPP stocks shell and tube heat exchangers from Atlas Industrial, Delta Tee International Inc., Graham, Meccanica Sardia, Pfaudler, Johnson Hunt LTD, Manning & Lewis, and other manufacturers. These units span the full range of materials, surface areas, and pressure ratings.

Exchangeurs De Chaleur S.A.G. SS 304 — 16.8 m²

Used Exchangeurs De Chaleur S.A.G. stainless steel 304 shell and tube heat exchanger with 16.8 m² (180.8 ft²) of heat transfer surface area in vertical orientation.

Surface d'échange thermique :16.8 m² (180.8 ft²) surface area

Matériau de la coque :Stainless Steel 304 shell

Pression de l'obus :6 bar (87 psi) shell side

Numéro du tube :56 tubes

Longueur du tube :1,850 mm (72.8 in) length

Condition:État d'occasion

Johnson Hunt LTD BEU Carbon Steel — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger with 6.4 m² (69 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :surface de 6,4 m² (69 pi²)

Matériau de la coque :Coque en acier au carbone

Pression de l'obus :9 bar (131 psi) shell side

Numéro du tube :44 tubes

Diamètre du tube :19.1 mm (0.8 in) diameter

Condition:État inutilisé

Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :83.8 m² (902 ft²) surface area

Matériel:Construction en acier inoxydable

Orientation:Orientation horizontale

Fabricant:Graham manufacturer

Condition:État d'occasion

Buy Used Shell and Tube Heat Exchangers by Condition

IPP stocks shell and tube heat exchangers in multiple condition grades, including used, unused, refurbished/rebuilt, and new. Choose the condition that matches your budget and performance requirements.

Buy Used Shell and Tube Heat Exchangers for Sale

Used shell and tube heat exchangers represent the largest condition category in IPP’s inventory. Available from VICARB, Doyle and Roth, Graham, Atlas Industrial, and other manufacturers in stainless steel, graphite, carbon steel, and specialty alloy construction. Used condition offers the lowest price point while providing OEM-quality vessels.

Used VICARB Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 6,4 m² (68,9 pi²)

Matériau du tube :Graphite tubes

Pression de l'obus :4 bar (58 psi) shell side

Fabricant:VICABRE

Modèle:FTA 20

Condition:État d'occasion

Used Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 10,4 m² (112 pi²)

Matériau du tube :Stainless Steel 304 tubes

Pression de l'obus :3,4 bar (50 psi) côté coque

Fabricant:Doyle et Roth

Condition:État d'occasion

Used Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :83.8 m² (902 ft²) surface area

Matériel:Construction en acier inoxydable

Orientation:Orientation horizontale

Fabricant:Graham manufacturer

Condition:État d'occasion

Buy Unused Shell and Tube Heat Exchangers for Sale

IPP stocks unused shell and tube heat exchangers — units that were manufactured but never placed into service. Johnson Hunt LTD is the most frequently available manufacturer for unused shell and tube heat exchangers in IPP’s inventory. Unused condition provides factory-new performance at reduced lead time compared to ordering new.

Unused Johnson Hunt LTD BEU — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 6,4 m² (68,9 pi²)

Matériau du tube :Graphite tubes

Pression de l'obus :4 bar (58 psi) shell side

Fabricant:VICABRE

Modèle:FTA 20

Condition:État d'occasion

Unused Johnson Hunt LTD AEM — 1.58 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.58 m² (17 ft²) of heat transfer surface area.

Surface d'échange thermique :1.58 m² (17 ft²) surface area

Matériau de la coque :Coque en acier au carbone

Pression de l'obus :26 bar (377 psi) shell side

Numéro du tube :11 tubes

Diamètre du tube :19.1 mm (0.8 in) diameter

Condition:État inutilisé

Unused Johnson Hunt LTD AEM — 1.95 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.95 m² (21 ft²) of heat transfer surface area and horizontal orientation.

Surface d'échange thermique :1.95 m² (21 ft²) surface area

Matériau de la coque :Coque en acier au carbone

Pression de l'obus :9 bar (131 psi) shell side

Numéro du tube :14 tubes

Diamètre du tube :19.1 mm (0.8 in) diameter

Condition:État inutilisé

Buy Refurbished/Rebuilt Shell and Tube Heat Exchangers for Sale

IPP stocks refurbished and rebuilt shell and tube heat exchangers that have been professionally restored to operational condition. Available from Manning & Lewis, Allegheny Bradford Corp., Le-Carbone Lorraine, and other manufacturers. Refurbished units provide restored performance with documented rebuild history.

Manning & Lewis SS 316 — 65,6 m²

Refurbished/rebuilt Manning & Lewis stainless steel 316 shell and tube heat exchanger with 65.6 m² (706 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 65,6 m² (706 pi²)

Matériau de la coque :Acier inoxydable 316

Matériau du tube :Acier inoxydable 316

Pression de l'obus :10.3 bar (150 psi) shell side

Orientation:Orientation horizontale

Condition:État remis à neuf/reconstruit

Allegheny Bradford SS 316L — 1,02 m²

Refurbished/rebuilt Allegheny Bradford Corp. stainless steel 316L shell and tube heat exchanger with 1.02 m² (11 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 1,02 m² (11 pi²)

Matériau de la coque :Stainless Steel 304L shell

Pression de l'obus :10.3 bar (150 psi) shell side

Matériau du tube :Stainless Steel 316L tubes

Condition:État remis à neuf/reconstruit

Le-Carbone Lorraine GM/8 Graphite — 2 m²

Refurbished/rebuilt Le-Carbone Lorraine GM/8 graphite shell and tube heat exchanger with 2 m² (21.5 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 2 m² (21,5 pi²)

Matériau du tube :Graphite tubes

Pression de l'obus :9 bar (130 psi) shell side

Matériau de la coque :Coque en acier au carbone

Condition:État remis à neuf/reconstruit

Buy New Shell and Tube Heat Exchangers for Sale

IPP stocks a select number of new shell and tube heat exchangers for applications requiring factory-new equipment. Available from Timmerman and Perry Products Co. in stainless steel construction.

New Timmerman SS 316L — 197.4 m²

New Timmerman stainless steel 316L shell and tube heat exchanger with 197.4 m² (2,100 ft²) of heat transfer surface area and vertical orientation.

Surface d'échange thermique :surface de 197,4 m² (2 100 pi²)

Matériau du tube :Stainless Steel 316 tubes

Pression de l'obus :12 bar (174 psi) shell side

Matériau de la coque :Stainless Steel 316 shell

Condition:État neuf

New Perry Products Co. AEU SS 304 — 105.1 m²

New Perry Products Co. AEU stainless steel 304 shell and tube heat exchanger with 105.1 m² (1,150 ft²) of heat transfer surface area.

Surface d'échange thermique :surface de 105,1 m² (1 150 pi²)

Matériau du tube :Stainless Steel 304 tubes

Pression de l'obus :15.7 bar (228 psi) shell side

Matériau de la coque :Coque en acier au carbone

Condition:État neuf

Ready to Buy a Used Shell and Tube Heat Exchanger?

Tell us your specifications and requirements. Our team will match your needs against current shell and tube heat exchangers inventory and provide a detailed quote.

Buying Used Shell and Tube Heat Exchangers vs Buying New

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new shell and tube heat exchangers compare across key factors.

Facteur	Utilisé à partir de l'IPP	Neuf (OEM)
Coût de l'équipement	Économies importantes par rapport au prix du nouveau constructeur	Prix catalogue complet du fabricant
Délai de livraison	Unités en stock prêtes à être expédiées	Délais de livraison prolongés (nouvelle fabrication)
Matériels	Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic	Spécifié sur mesure
Fabricants	VICARB, Doyle and Roth, Atlas Industrial and others	OEM unique
Impact environnemental	Prolonge la durée de vie des équipements, réduit les déchets	nouvelle consommation de matières premières

Advantages of Buying Used Shell and Tube Heat Exchangers from IPP

International Process Plants combine plus de 46 ans d'expertise en équipements de traitement, près de 150 collaborateurs répartis dans 15 pays et un stock de 15 000 systèmes de traitement et équipements majeurs pour fournir des réacteurs prêts pour votre procédé.

Des économies de coûts importantes

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilité immédiate

In-stock shell and tube heat exchangers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Fabricants OEM multiples

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc. and other manufacturers. Every unit is an original OEM product with traceable provenance.

Qualité et remise à neuf

IPP propose des services de remise à neuf par le biais de sa division UGE (Universal Glasteel Equipment), fondée en 1995, qui dispose d'un stock de plus de 700 navires et de plus de 2 700 pièces.

Présence mondiale dans 15 pays

IPP possède des bureaux dans 15 pays : Allemagne, Brésil, Canada, Chine, Espagne, États-Unis, France, Inde, Italie, Mexique, Pakistan, Portugal, République tchèque, Roumanie, Royaume-Uni et Turquie. IPP a servi plus de 160 000 clients dans le monde entier.

Gamme complète de matériaux et de spécifications

IPP stocks shell and tube heat exchangers across a wide range of specifications to match your process requirements.

How Buying a Used Shell And Tube Heat Exchanger Works

The process of purchasing used shell and tube heat exchangers from IPP follows five steps, from specification to delivery.

1

Soumettre les exigences

Indiquez vos spécifications : capacité, matériau de construction, pression nominale, température et application. Ou consultez notre catalogue.

2

Réception du paquet de données

IPP envoie une fiche technique détaillée de l'équipement comprenant les spécifications, les dimensions, un rapport d'état et des photographies.

3

Inspecter l'équipement

Contactez IPP pour organiser une visite sur site ou demandez une visite vidéo en direct avec un membre de l'équipe IPP dans l'un de nos sites à travers le monde.

4

Options de rénovation

IPP propose des services de rénovation par le biais de sa division UGE (plus de 700 navires, plus de 2 700 pièces en stock). Contactez IPP pour plus d'informations sur les services complémentaires.

5

Emballage et livraison

IPP prend en charge l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Expédition internationale depuis nos bureaux situés dans 15 pays.

Industries That Buy Used Shell and Tube Heat Exchangers

IPP supplies used shell and tube heat exchangers to manufacturers across multiple process industries worldwide.

Pharmaceutique

Traitement chimique

Biotechnologie

Restauration

Environnement

Pétrole et gaz

eaux usées

Produits chimiques fins

Peintures et revêtements

Produits pétrochimiques

Frequently Asked Questions About Buying Used Shell and Tube Heat Exchangers

Answers to the most common questions from procurement and operations teams evaluating used shell and tube heat exchangers.

How many shell and tube heat exchangers does IPP have in stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Available in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Browse the IMS inventory for current availability.

What condition grades are available for used shell and tube heat exchangers?

IPP stocks shell and tube heat exchangers in multiple conditions: Used, Unused, Refurbished/Rebuilt, New. Consultez l'inventaire actuel pour connaître les options disponibles.

Does IPP sell new shell and tube heat exchangers as well as used?

Oui. IPP stocks new shell and tube heat exchangers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Contactez IPP pour plus de détails sur les nouveaux stocks.

Quels matériaux de construction sont disponibles ?

IPP stocks shell and tube heat exchangers in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Contactez IPP pour discuter des exigences matérielles de votre application.

What manufacturers of shell and tube heat exchangers does IPP stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Consultez l'inventaire actuel pour voir les fabricants disponibles.

How much can I save buying used shell and tube heat exchangers versus new?

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Les économies exactes dépendent du fabricant, de la capacité, des matériaux de construction et de l'état du produit. Contactez IPP pour obtenir un devis pour un modèle spécifique.

How long does it take to receive shell and tube heat exchangers from IPP?

In-stock shell and tube heat exchangers are ready to ship. La filiale GPS d'IPP fournit de nouveaux équipements fabriqués sur mesure avec un délai de livraison moyen de 12 à 16 semaines. IPP expédie ses produits depuis des bureaux situés dans 15 pays à travers le monde.

IPP gère-t-il l'expédition et le fret ?

IPP coordonne l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Avec des bureaux dans 15 pays et Plus de 160 000 clients servis dans le monde entier, IPP possède une vaste expérience en matière de logistique mondiale d'équipements.

Autres types d'équipements d'IPP

In addition to shell and tube heat exchangers, IPP stocks equipment across multiple categories for complete process solutions.

Réacteurs

Évaporateurs

chars

Looking for New Shell and Tube Heat Exchangers?

Le groupe IPP fournit des équipements neufs par l'intermédiaire de sa filiale Gale Process Solutions (GPS), qui propose des équipements fabriqués sur mesure avec un délai de livraison moyen de 12 à 16 semaines. IPP propose également des équipements reconditionnés par le biais de sa division UGE (Universal Glasteel Equipment).

Ready to Buy Shell and Tube Heat Exchangers?

Depuis 1980, IPP fournit des équipements de process de qualité dans le monde entier et compte plus de 160 000 clients. Faites-nous part de vos besoins : notre équipe vous proposera les produits et les prix adaptés.