Buy Used Pulverizers for Sale
Buying used pulverizers through International Process Plants gives chemical, pharmaceutical, food, mineral, plastics, and recycling manufacturers access to 101 pulverizers across 4 size-reduction technologies—granulator/disintegrator, jet, hammer, and comminutor pulverizers—ranging from 1 kW (1.34 HP) bench-scale granulators to 223.7 kW (300 HP) heavy-duty units—from Mikro, Alpine (Hosokawa), Frewitt, Nederman MikroPul, Fitzpatrick, Condux, Williams, Rietz, and other OEMs.
Materials of construction include stainless steel 304, 316, 316L, 321, austenitic grades, and carbon steel. IPP stocks pulverizers from leading manufacturers such as Mikro Pulverizer, Fitzpatrick, and Hosokawa. Condition options include good used and unused surplus units.
Used pulverizer equipment from IPP encompasses a wide range of machinery essential for material size reduction. Whether you require hammer mills, jet mills, or fluid energy mills, IPP offers equipment that meets your specific needs. Buying used pulverizers from IPP can save up to 50% of capital and 90% of lead time versus buying new
100+
Pulverizers In Stock
1-224
kW Motor Power Range
25+
OEM Manufacturer
Nederman MikroPul
Featured: SS 316 granulator/disintegrator
Buy Used Pulverizers for Sale by Subtype
Granulator & Disintegrator Pulverizers for Sale
Alpine (Hosokawa) Multiplex 315 UPZ SS 304
Used Alpine (Hosokawa) Multiplex 315 UPZ stainless steel 304 granulator/disintegrator pulverizer. 11 m3 (388.5 ft3) capacity with 22 kW (29.5 HP) motor and belt-driven horizontal operation.
Материал:Нержавеющая сталь 304
Емкость:11 m3 (388.5 ft3)
Мощность двигателя:22 кВт (29,5 л.с.)
Inlet Diameter:150 мм (5,9 дюйма)
Давление:0.05 bar (0.73 psi)
Температура:60°C (140°F)
Ориентация:Horizontal, belt drive
Alpine (Hosokawa) 710-CW SS 321
Used Alpine (Hosokawa) 710-CW stainless steel 321 granulator/disintegrator pulverizer. 48 kW (64.4 HP) motor, horizontal orientation, belt drive, baseplate mounted.
Материал:Нержавеющая сталь 321
Мощность двигателя:48 kW (64.4 HP)
Длина:4,700 mm (184.4 in)
Width:2,200 mm (86.2 in)
Высота:1,900 mm (74 in)
Температура:60°C (140°F)
Frewitt SG Granulator SS 321
Used Frewitt SG stainless steel 321 granulator/disintegrator pulverizer. 47.8 m3 (1,700 ft3) capacity with 4 kW (5.4 HP) motor and 120 mm (4.7 in) screen.
Материал:Нержавеющая сталь 321
Емкость:47.8 m3 (1,700 ft3)
Мощность двигателя:4 кВт (5,4 л.с.)
Давление:0.21 bar (3 psi)
Температура:61.7°C (143°F)
Screen Size:120 mm (4.7 in)
Jet Pulverizers for Sale
Mikro 6MA Jet Pulverizer SS Other
Used Mikro 6MA stainless steel other jet pulverizer. 22.4 kW (30 HP) motor at 6,000 RPM with 76.2 mm (3 in) outlet and atomizer/motor mounted on carbon steel base.
Материал:Stainless Steel Other
Мощность двигателя:22.4 kW (30 HP)
Скорость:6,000 RPM
Inlet Diameter:139.7 mm (5.5 in)
Outlet Diameter:76.2 mm (3 in)
Footprint:1,450 x 1,100 x 1,000 mm (57 x 43 x 40 in)
Motor:TEFC, 460 V / 60 Hz
Mikro 8 MA Jet Pulverizer SS Other
Used Mikro 8 MA stainless steel other jet pulverizer. 90 kW (120.7 HP) ABB motor at 8,000 RPM, vertical orientation with clarifier.
Материал:Stainless Steel Other
Мощность двигателя:90 kW (120.7 HP)
Скорость:8,000 RPM
Clarifier:Да
Ориентация:Vertical
Motor Make:ABB M2KA 280SMB, 500 V / 50 Hz
Aljet Roto Mill 30 RJ SS 304
Used Aljet Roto Mill 30 RJ stainless steel 304 jet pulverizer. 22.4 kW (30 HP), 3,500 RPM, 10.3 bar (150 psi) and 3,900 m3/h (2,300 CFM) air flow with Acrison screw feeder.
Материал:Нержавеющая сталь 304
Мощность двигателя:22.4 kW (30 HP)
Давление:10,3 бар (150 фунтов на квадратный дюйм)
Расход воздуха:3,900 m3/h (2,300 CFM)
Feed Type:Acrison FHM01206 screw feed
Options:Clarifier and controls included
Hammer Pulverizers for Sale
Williams 40GA Hammer Pulverizer Carbon Steel
Used Williams 40GA carbon steel hammer pulverizer. 111.9 kW (150 HP) motor, 1,200 RPM, 12 hammers, skid-mounted system with heater.
Материал:Углеродистая сталь
Мощность двигателя:111.9 kW (150 HP)
Скорость:1200 об/мин
Hammers:12
Inlet Diameter:381 mm (15 in)
Outlet Diameter:482.6 mm (19 in)
Configuration:Skid-mounted with heater
Fitzpatrick D6 Hammer Pulverizer SS 316
Used Fitzpatrick D6 stainless steel 316 hammer pulverizer. 11.2 kW (15 HP) motor, 16 knives, 304.8 mm (12 in) inlet, mounted on 48 in legs.
Материал:Нержавеющая сталь 316
Мощность двигателя:11,2 кВт (15 л.с.)
Knives:16
Inlet Diameter:304,8 мм (12 дюймов)
Inlet Height:304,8 мм (12 дюймов)
Drive:Belt, horizontal
Pulva Corp B Hammer Mill Carbon Steel
Used Pulva Corp B hammer mill carbon steel pulverizer. 11.2 kW (15 HP) U.S. Motors at 6,900 RPM with 2 swing hammers across 12 rows, vertical CS stand.
Материал:Углеродистая сталь
Мощность двигателя:11,2 кВт (15 л.с.)
Скорость:6,900 RPM
Hammers:2 hammers x 12 rows
Swing Hammers:Да
Емкость:0.03 m3 (1 ft3)
Comminutor Pulverizers for Sale
Fitzpatrick Comminutor SS 304
Used Fitzpatrick Comminutor stainless steel 304 pulverizer. 7.5 kW (10 HP) Sterling motor with belt drive and 6.4 mm (0.25 in) screen.
Материал:Нержавеющая сталь 304
Мощность двигателя:7.5 kW (10 HP)
Motor Make:Sterling B0104YFF2A0
Motor Frame:215T
Screen Size:6.4 mm (0.25 in)
Drive:Belt
Fitzmill Comminutor Pulverizer SS Other
Used Fitzmill stainless steel other comminutor pulverizer. 7.5 kW (10 HP) motor, vertical orientation, portable on cart with casters.
Материал:Stainless Steel Other
Мощность двигателя:7.5 kW (10 HP)
Inlet Diameter:304,8 мм (12 дюймов)
Outlet Diameter:406.4 mm (16 in)
Portable:Yes, mounted on cart
Footprint:1,200 x 1,150 x 1,900 mm (48 x 45 x 75 in)
Buy Used Pulverizers for Sale by Manufacturer
Buy Used Mikro Pulverizers for Sale
Mikro 6MA Jet Pulverizer SS Other
Used Mikro 6MA stainless steel other jet pulverizer. 22.4 kW (30 HP) at 6,000 RPM with TEFC motor, atomizer mounted on carbon steel base.
Материал:Stainless Steel Other
Мощность двигателя:22.4 kW (30 HP)
Модель:6MA
Скорость:6,000 RPM
Mikro 8 MA Jet Pulverizer SS Other — 90 kW (120.7 HP)
Used Mikro 8 MA stainless steel other jet pulverizer. 90 kW (120.7 HP) ABB motor at 8,000 RPM, vertical with clarifier.
Материал:Stainless Steel Other
Мощность двигателя:90 kW (120.7 HP)
Модель:8 MA
Clarifier:Да
Mikro 6MA Jet Pulverizer SS Other (Unit 2)
Used Mikro 6MA stainless steel other jet pulverizer. 22.4 kW (30 HP), 6,000 RPM, identical configuration to 212527.
Материал:Stainless Steel Other
Мощность двигателя:22.4 kW (30 HP)
Модель:6MA
Footprint:1,450 x 1,100 x 1,000 mm (57 x 43 x 40 in)
Buy Used Alpine (Hosokawa) Pulverizers for Sale
Alpine (Hosokawa) Multiplex 315 UPZ SS 304
Used Alpine (Hosokawa) Multiplex 315 UPZ stainless steel 304 granulator pulverizer. 11 m3 (388.5 ft3) capacity, 22 kW (29.5 HP), horizontal with belt drive.
Материал:Нержавеющая сталь 304
Модель:Multiplex 315 UPZ
Емкость:11 m3 (388.5 ft3)
Мощность двигателя:22 кВт (29,5 л.с.)
Alpine (Hosokawa) 710-CW SS 321
Used Alpine (Hosokawa) 710-CW stainless steel 321 granulator pulverizer. 48 kW (64.4 HP), 4,700 x 2,200 x 1,900 mm (184.4 x 86.2 x 74 in) baseplate-mounted.
Материал:Нержавеющая сталь 321
Модель:710-CW
Мощность двигателя:48 kW (64.4 HP)
Длина:4,700 mm (184.4 in)
Alpine (Hosokawa) 800 AFG-1 Jet Carbon Steel
Used Alpine (Hosokawa) 800 AFG-1 carbon steel jet pulverizer. 16 kW (21.5 HP), 1,250 m3 (44,150 ft3) capacity, 5,200 m3/h (3,050 CFM) air flow, vertical with clarifier.
Материал:Углеродистая сталь
Модель:800 AFG-1
Мощность двигателя:16 kW (21.5 HP)
Расход воздуха:5,200 m3/h (3,050 CFM)
Buy Used Frewitt Pulverizers for Sale
Frewitt SG Granulator SS 321
Used Frewitt SG stainless steel 321 granulator/disintegrator pulverizer. 47.8 m3 (1,700 ft3) capacity, 4 kW (5.4 HP), 120 mm (4.7 in) screen.
Материал:Нержавеющая сталь 321
Модель:SG
Емкость:47.8 m3 (1,700 ft3)
Screen Size:120 mm (4.7 in)
Frewitt Hammerwitt 6 Polished SS 316
Used Frewitt Hammerwitt mill 6 highly polished stainless steel 316 hammer pulverizer. 4 kW (5.4 HP), 24 hammers, 0.25 mm (0.01 in) screen, direct-coupled drive.
Материал:Stainless Steel 316 (polished)
Модель:Hammerwitt mill 6
Мощность двигателя:4 кВт (5,4 л.с.)
Hammers:24
Screen Size:0.25 mm (0.01 in)
Frewitt MGF-620 Granulator SS 304
Used Frewitt MGF-620 stainless steel 304 granulator/disintegrator pulverizer. 1 kW (1.34 HP) Brown Boveri motor at 350 RPM, horizontal belt drive.
Материал:Нержавеющая сталь 304
Модель:MGF-620
Мощность двигателя:1 kW (1.34 HP)
Скорость:350 RPM
Buy Used Nederman MikroPul Pulverizers for Sale
Nederman MikroPul has 7 units in IPP’s pulverizer inventory. Models in stock include 2DH granulator, 3TH hammer, and 5MA / 6MA jet mills.
Nederman MikroPul 2DH Granulator SS 316
Used Nederman MikroPul 2DH stainless steel 316 granulator/disintegrator pulverizer. 11.2 kW (15 HP) Baldor RGZZ motor, horizontal orientation, base mounted.
Материал:Нержавеющая сталь 316
Модель:2DH
Мощность двигателя:11,2 кВт (15 л.с.)
Motor:Baldor RGZZ, 230/460 V / 60 Hz
Footprint:1,200 x 1,200 x 1,050 mm (48 x 48 x 42 in)
Nederman MikroPul 5MA Jet SS 304
Used Nederman MikroPul 5MA stainless steel 304 jet pulverizer. 3.7 kW (5 HP) motor with gravity feed and single screw feeder belt drive, horizontal orientation on wheeled stand.
Материал:Нержавеющая сталь 304
Модель:5MA
Мощность двигателя:3,7 кВт (5 л.с.)
Feed Type:Gravity + screw feeder
Buy Used Condux & Fitzpatrick Pulverizers for Sale
Condux CUM 280/S-D Granulator SS 316
Used Condux CUM 280/S-D stainless steel 316 granulator pulverizer. 11 kW (14.8 HP), 2,995 RPM, 100 mm (3.9 in) inlet, horizontal orientation.
Материал:Нержавеющая сталь 316
Модель:CUM 280/S-D
Мощность двигателя:11 кВт (14,8 л.с.)
Скорость:2,995 RPM
Inlet Diameter:100 mm (3.9 in)
Condux CUM 150/S-D-WG Universal Impact Mill SS 316L
Used Condux CUM 150/S-D-WG Universal impact mill stainless steel 316L pulverizer. 5.5 kW (7.4 HP) motor at 16,000 RPM with belt drive, mounted on stainless steel table.
Материал:Нержавеющая сталь 316L
Модель:CUM 150/S-D-WG
Мощность двигателя:5,5 кВт (7,4 л.с.)
Скорость:16,000 RPM
Screen:Да
Fitzpatrick D6 Hammer SS 316
Used Fitzpatrick D6 stainless steel 316 hammer pulverizer. 11.2 kW (15 HP), 16 knives, 304.8 mm (12 in) inlet, horizontal belt drive.
Материал:Нержавеющая сталь 316
Модель:D6
Мощность двигателя:11,2 кВт (15 л.с.)
Knives:16
Buy Used Pulverizers for Sale by Condition
Buy Used Pulverizers for Sale
Used Alpine (Hosokawa) 710-CW Granulator/Disintegrator SS 321
Used Alpine (Hosokawa) 710-CW stainless steel 321 granulator/disintegrator pulverizer with 90 kW (120.7 HP) motor power.
Состояние:Б/у состояние
Материал:Нержавеющая сталь 321
Модель:710-CW
Used Mikro 6MA Jet Pulverizer SS Other
Used Mikro 6MA stainless steel jet pulverizer for fine and ultra-fine size reduction using compressed gas streams.
Состояние:Б/у состояние
Материал:Stainless Steel Other
Модель:6MA
Used Williams 40GA Hammer Pulverizer Carbon Steel
Used Williams 40GA carbon steel hammer pulverizer with 111.9 kW (150 HP) motor for high-throughput mineral and chemical size reduction.
Состояние:Б/у состояние
Материал:Углеродистая сталь
Мощность двигателя:111.9 kW (150 HP)
Buy Unused Surplus Pulverizers for Sale
Unused Rietz RD-18-P32 Granulator/Disintegrator Carbon Steel
Unused Rietz RD-18-P32 carbon steel granulator/disintegrator pulverizer with 74.6 kW (100 HP) Reliance Duty Master motor, direct coupled, vertical orientation.
Состояние:Состояние: новое
Модель:RD-18-P32
Мощность двигателя:74.6 kW (100 HP)
Unused GEA Pharmadule PMA Advance 60 SS 316
Unused GEA Pharmadule PMA Advance 60 stainless steel 316 granulator/disintegrator pulverizer. 48 m3 (1,700 ft3) capacity with 4 kW (5.4 HP) motor and side-mounted choppers.
Состояние:Состояние: новое
Материал:Нержавеющая сталь 316
Емкость:48 m3 (1,700 ft3)
Unused GEA Pharmodule PMA Advance 300 SS 316L
Unused GEA Pharmodule PMA Advance 300 stainless steel 316L granulator/disintegrator pulverizer. 300 m3 (10,600 ft3) capacity with 15 kW (20.1 HP) motor, jacketed, Clean-In-Place capable.
Состояние:Состояние: новое
Материал:Нержавеющая сталь 316L
Емкость:300 m3 (10,600 ft3)
Comparing Used Pulverizer Types
| Pulverizer Type | Size-Reduction Mechanism | Typical Fineness | Лучше всего подходит для |
|---|---|---|---|
| Granulator / Disintegrator (55 units) | Rotating knives, pins, or impact rotor | Coarse to medium granules | Pharmaceutical granulations, food, plastics, chemicals |
| Jet (24 units) | High-velocity compressed gas (air/steam) particle-on-particle impact | Ultra-fine, micronized (sub-micron to ~10 µm) | Heat-sensitive APIs, pigments, fine ceramics, contamination-sensitive feeds |
| Hammer (18 units) | Rotating hammers and screen-controlled impact grinding | Coarse to medium powders | Minerals, mining, recycling, chemicals, high-throughput duties |
| Comminutor (2 units) | Rotating impeller with screen for controlled particle sizing | Medium powders, controlled distribution | Pharmaceutical and chemical sizing, lump breaking |
Need a Used Pulverizer? Ask an IPP Expert.
Advantages of Buying Used Pulverizers from IPP
Значительная экономия затрат
Buying used pulverizers from IPP can save up to 50% of capital and 90% of lead time versus buying new. With 101 pulverizers across 4 subtypes in current inventory, IPP offers a broad selection to match your budget and process requirements.
Немедленная доступность
In-stock pulverizers from IPP are ready to ship. New OEM pulverizers require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.
4 Pulverizer Subtypes in One Inventory
IPP stocks granulator/disintegrator, jet, hammer, and comminutor pulverizers. One supplier covers coarse-to-ultra-fine size reduction across pharma, chemical, food, mineral, and recycling duties.
Multiple Materials of Construction
Materials include stainless steel (SS 304, 316, 316L, 321, austenitic, and other grades), and carbon steel. Match the material to your process chemistry, sanitary requirements, and abrasion profile.
Глобальное присутствие в 15 странах
Компания IPP имеет офисы в 15 странах: Бразилии, Канаде, Китае, Чехии, Франции, Германии, Индии, Италии, Мексике, Пакистане, Португалии, Румынии, Турции, Великобритании и США. IPP обслужила более 160 000 клиентов по всему миру.
Ведущие производители оригинального оборудования (OEM)
IPP stocks pulverizers from Mikro, Alpine (Hosokawa), Frewitt, Nederman MikroPul, Condux, Fitzpatrick, Williams, Rietz, GEA, Pallman, Bühler, Alexanderwerk Pharma, British Rema, Quadro Engineering, Urschel, and additional OEMs. Every unit is an original OEM product with traceable provenance.
How Buying a Used Pulverizer Works
1
Предоставьте необходимые документы.
Share your pulverizer specifications: subtype (granulator, jet, hammer, comminutor), feed material, target particle size, throughput, motor power, and material of construction. Or browse our searchable pulverizer inventory.
2
Получение пакета данных
IPP sends a detailed equipment data sheet with motor power, screen size, rotor speed, dimensions, material of construction, and condition report with photographs.
3
Осмотрите оборудование
Contact IPP to arrange an on-site visit or request a live video walkthrough of the pulverizer with an IPP team member at one of our global locations. IPP operates offices in 15 countries.
4
Упаковка и доставка
IPP coordinates packaging, crating, freight, and delivery to your plant site. IPP's UGE division stocks 700+ vessels and 2,700+ parts for additional refurbishment and spares support.
Browse All Pulverizer Types
All Pulverizers (IMS Inventory)
Searchable IMS inventory of all 101 pulverizers including granulator, jet, hammer, and comminutor subtypes.
Used Mills
Ball mills, hammer mills, colloid mills, and roller mills for fine-to-coarse size reduction across process industries.
Used Mixers
Ribbon, paddle, plough, and high-shear mixers for blending pulverized powders and granulations.
Used Dryers
Rotary vacuum, fluid bed, spray, freeze, and other dryers used upstream or downstream of pulverizers.
Industries That Buy Used Pulverizers
IPP supplies used pulverizers to manufacturers across multiple process industries worldwide. Pulverizers serve any operation that requires controlled particle-size reduction of dry feed materials.
Фармацевтическая
Food & Ingredients
Фармацевтическая
Minerals & Mining
Plastics & Polymers
Краски и покрытия
Recycling
Тонкая химия
Frequently Asked Questions About Buying Used Pulverizers
IPP stocks 101 pulverizers across 4 subtypes: granulator/disintegrator pulverizers (55 units), jet pulverizers (24 units), hammer pulverizers (18 units), and comminutor pulverizers (2 units). Manufacturers include Mikro, Alpine (Hosokawa), Frewitt, Nederman MikroPul, Condux, Fitzpatrick, Williams, and Rietz. Browse the IMS pulverizer inventory for current availability, or связаться с ИПП to discuss your specific size-reduction requirements.
Jet pulverizers use high-velocity compressed gas streams to drive particle-on-particle impact for ultra-fine size reduction without mechanical contact, which protects against contamination and is well suited to heat-sensitive materials. Hammer pulverizers use rotating hammers and a screen to impact-grind feed material; they offer higher throughput at coarser particle sizes and are often used in chemical, mineral, and recycling applications.
IPP stocks pulverizers in stainless steel 304 (26 units), carbon steel (23 units), stainless steel other grades (21 units), stainless steel 316 (13 units), stainless steel 321 (9 units), stainless steel 316L (3 units), and austenitic stainless steel (2 units). Stainless steel is used for pharmaceutical, food, and sanitary applications, while carbon steel serves mineral, recycling, and general industrial size reduction.
Buying used pulverizers from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on subtype, manufacturer, material of construction, motor power, and condition. Contact IPP for pricing on specific units from current pulverizer inventory.
Motor power across IPP's pulverizer inventory ranges from 1 kW (1.34 HP) on a Frewitt MGF-620 laboratory granulator up to 223.7 kW (300 HP) on large mineral pulverizers. The most common power range is 7.5 to 22.4 kW (10 to 30 HP) for pharmaceutical, chemical, and food processing duties.
Компания IPP координирует упаковку, обрешетку, транспортировку и доставку на вашу производственную площадку. IPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
RU 
EN 
ES 
FR 
PL 
DE 
AR 
UR 
HI 
NL 
TR 
IT 
UK 
JA 
PT 
ZH