Buy Used Shell and Tube Heat Exchangers for Sale

Buying used shell and tube heat exchangers through International Process Plants gives chemical manufacturing, pharmaceutical and food processing, oil and gas refining, and HVAC and utility operations access to tube bundles enclosed inside a cylindrical shell, where one process stream travels inside the tubes while a second stream flows across them on the shell side. Manufacturers include VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, and Graham among other OEMs. ▶

Heat transfer surface area in stock spans roughly 0.37 m² (4 ft²) on IPP# 221143 up to 1,050 m² (11,250 ft²) on IPP# 230449. Tube materials in inventory cover Stainless Steel 316, Stainless Steel 304, Stainless Steel Austenitic, Stainless Steel 321, Graphite, Carbon Steel, Tantalum, Titanium, and Hastelloy alloys. Shell construction is dominated by Carbon Steel, with Stainless Steel 316 and 304, Stainless Steel Austenitic, Stainless Steel 321, and Glasslined options also represented. Shell-side and tube-side ratings reach as high as 179.3 bar (2,600 psi) on units such as IPP# 212821. Bundle counts range from a single tube on IPP# 211622 up to 2,819 tubes on IPP# 212739, with bundle lengths reaching 18,000 mm (709 in) on IPP# 222336.

IPP carries BEM, AEU, AKU, CFT, FTA, and DEU model designations across multiple OEMs. Horizontal, vertical, and inclined orientations are all stocked, with horizontal mountings being the most common. Many units are rated for vacuum service on the shell or tube side. Condition options run from used through refurbished, unused, and brand new stock. Typical service duties include process heating and cooling, vapor condensing, and energy recovery loops. Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Filters op voorraad

1980

Opgericht sinds

15

Landen met vestigingen

Sices S.p.A Stainless Steel 316L

Gebruikt

Albach Cembell Hastelloy - Other

Gebruikt

Perry Products Co. Stainless Steel 304

Gebruikt

Buy Used Shell and Tube Heat Exchangers by Material

IPP stocks shell and tube heat exchangers across stainless steel, graphite, carbon steel, and specialty alloy options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Shell and Tube Heat Exchangers for Sale

IPP stocks stainless steel shell and tube heat exchangers in 316, 316L, 304, 321, and Austenitic grades. Available from Sices S.p.A, Perry Products Co., AEL Apparatebau GmbH, Graham, Doyle and Roth, and other manufacturers.

Sices S.p.A BEM/1000 x 2700 — 150 m²

Used Sices S.p.A BEM/1000 x 2700 shell and tube heat exchanger with 150 m² (1,600 ft²) of heat transfer surface area and a 762-tube bundle.

Warmteoverdrachtsoppervlakte:150 m² (1,600 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Tube Number:762 tubes

Tube Length:2,700 mm (106.3 in) length

Buisdruk:20 bar (290 psi) tube side

Fabrikant:Sices S.p.A BEM/1000

Model:2700

Perry Products Co. AEU — 105 m²

New Perry Products Co. AEU shell and tube heat exchanger built in Stainless Steel 304 with 105.1 m² (1,150 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Tube Number:197 tubes

Tube Length:4,250 mm (167.3 in) length

Buisdruk:75.6 bar (1,100 psi) tube side

Voorwaarde:Nieuwe staat

AEL Apparatebau BEM — 221 m²

Used AEL Apparatebau GmbH BEM shell and tube heat exchanger built in Stainless Steel 904L with 221 m² (2,400 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:221 m² (2,400 ft²) surface area

Tube Material:Stainless Steel 904L tubes

Tube Number:574 tubes

Tube Length:5,000 mm (196.9 in) length

Buisdruk:6 bar (87 psi) tube side

Fabrikant:AEL Apparatebau GmbH

Model:BEM

Buy Used Graphite Shell and Tube Heat Exchangers for Sale

IPP stocks graphite shell and tube heat exchangers. Available from VICARB, Sigri, Graphite Apparatebau and other manufacturers.

Carbone of America Corp. Graphite

Unused Carbone of America Corp. Graphite heat exchanger.

Materiaal:Graphite

Voorwaarde:In ongebruikte staat

Fabrikant:Carbone of America Corp.

Model:PYT44-283-18

SGL Carbon Graphite

Used SGL Carbon Graphite heat exchanger.

Materiaal:Graphite

Voorwaarde:Gebruikte staat

Fabrikant:SGL Carbon

Model:RS77-1-595.601

Buy Used Carbon Steel Shell and Tube Heat Exchangers for Sale

IPP stocks carbon steel shell and tube heat exchangers. Available from Delta Tee International Inc., Johnson Hunt LTD, Graham and other manufacturers.

Atlas Industrial Carbon Steel

Used Atlas Industrial Carbon Steel heat exchanger.

Materiaal:Koolstofstaal

Voorwaarde:Gebruikte staat

Western Supply Carbon Steel

Used Western Supply Carbon Steel heat exchanger.

Materiaal:Koolstofstaal

Voorwaarde:Gebruikte staat

Fabrikant:Western Supply

Model:BEM

Buy Used Other Shell and Tube Heat Exchangers for Sale

IPP stocks other shell and tube heat exchangers. Available from DeDietrich, , Tranter-Superchanger and other manufacturers.

Albach Cembell Hastelloy - Other

Used Albach Cembell Hastelloy – Other heat exchanger.

Materiaal:Hastelloy – Other

Voorwaarde:Gebruikte staat

Fabrikant:Albach Cembell

Model:29-129 BEM

Atlas Industrial Hastelloy - Other

Used Atlas Industrial Hastelloy – Other heat exchanger.

Materiaal:Hastelloy – Other

Voorwaarde:Gebruikte staat

Fabrikant:Atlas Industrial

Model:BEM 20-60

Buy Used Shell and Tube Heat Exchangers by Manufacturer

IPP stocks shell and tube heat exchangers from a wide range of manufacturers, with VICARB and Doyle and Roth representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts availability.

Buy Used VICARB Shell and Tube Heat Exchangers for Sale

VICARB is the deepest single-manufacturer position in IPP’s shell and tube heat exchanger inventory. Available VICARB models include FTA 20 and FTA20/24/26 series units, primarily in graphite construction for corrosion-resistant heat transfer applications.

VICARB FTA 20 Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Shell Material:Carbon steel shell

Voorwaarde:Gebruikte staat

VICARB FTA20/24/26 Graphite — 12.1 m²

Used VICARB FTA20/24/26 graphite shell and tube heat exchanger with 12.1 m² (130 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:12.1 m² (130 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Voorwaarde:Gebruikte staat

VICARB Graphite — 23.3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:23.3 m² (250.8 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Voorwaarde:Gebruikte staat

Buy Used Doyle and Roth Shell and Tube Heat Exchangers for Sale

Doyle and Roth is the second deepest OEM position in IPP’s shell and tube heat exchanger inventory. Available in stainless steel 304 and Inconel construction for demanding process environments.

Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Shell Material:Stainless Steel 316 shell

Voorwaarde:Gebruikte staat

Doyle and Roth Inconel — 8.6 m²

Used Doyle and Roth Inconel shell and tube heat exchanger with 8.6 m² (93 ft²) of heat transfer surface area for high-temperature corrosion-resistant service.

Warmteoverdrachtsoppervlakte:8.6 m² (93 ft²) surface area

Tube Material:Inconel tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Voorwaarde:Gebruikte staat

Doyle and Roth SS 304 — 68.1 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 68.1 m² (733 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:68.1 m² (733 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Voorwaarde:Gebruikte staat

Buy Used Shell and Tube Heat Exchangers from Other Manufacturers

Beyond VICARB and Doyle and Roth, IPP stocks shell and tube heat exchangers from Atlas Industrial, Delta Tee International Inc., Graham, Meccanica Sardia, Pfaudler, Johnson Hunt LTD, Manning & Lewis, and other manufacturers. These units span the full range of materials, surface areas, and pressure ratings.

Exchangeurs De Chaleur S.A.G. SS 304 — 16.8 m²

Used Exchangeurs De Chaleur S.A.G. stainless steel 304 shell and tube heat exchanger with 16.8 m² (180.8 ft²) of heat transfer surface area in vertical orientation.

Warmteoverdrachtsoppervlakte:16.8 m² (180.8 ft²) surface area

Shell Material:Stainless Steel 304 shell

Shell Pressure:6 bar (87 psi) shell side

Tube Number:56 tubes

Tube Length:1,850 mm (72.8 in) length

Voorwaarde:Gebruikte staat

Johnson Hunt LTD BEU Carbon Steel — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger with 6.4 m² (69 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:6.4 m² (69 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:44 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Voorwaarde:In ongebruikte staat

Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:83.8 m² (902 ft²) surface area

Materiaal:Stainless steel construction

Oriëntatie:Horizontal orientation

Fabrikant:Graham manufacturer

Voorwaarde:Gebruikte staat

Buy Used Shell and Tube Heat Exchangers by Condition

IPP stocks shell and tube heat exchangers in multiple condition grades, including used, unused, refurbished/rebuilt, and new. Choose the condition that matches your budget and performance requirements.

Buy Used Shell and Tube Heat Exchangers for Sale

Used shell and tube heat exchangers represent the largest condition category in IPP’s inventory. Available from VICARB, Doyle and Roth, Graham, Atlas Industrial, and other manufacturers in stainless steel, graphite, carbon steel, and specialty alloy construction. Used condition offers the lowest price point while providing OEM-quality vessels.

Used VICARB Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Fabrikant:VICARB

Model:FTA 20

Voorwaarde:Gebruikte staat

Used Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Fabrikant:Doyle and Roth

Voorwaarde:Gebruikte staat

Used Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:83.8 m² (902 ft²) surface area

Materiaal:Stainless steel construction

Oriëntatie:Horizontal orientation

Fabrikant:Graham manufacturer

Voorwaarde:Gebruikte staat

Buy Unused Shell and Tube Heat Exchangers for Sale

IPP stocks unused shell and tube heat exchangers — units that were manufactured but never placed into service. Johnson Hunt LTD is the most frequently available manufacturer for unused shell and tube heat exchangers in IPP’s inventory. Unused condition provides factory-new performance at reduced lead time compared to ordering new.

Unused Johnson Hunt LTD BEU — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Fabrikant:VICARB

Model:FTA 20

Voorwaarde:Gebruikte staat

Unused Johnson Hunt LTD AEM — 1.58 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.58 m² (17 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:1.58 m² (17 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:26 bar (377 psi) shell side

Tube Number:11 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Voorwaarde:In ongebruikte staat

Unused Johnson Hunt LTD AEM — 1.95 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.95 m² (21 ft²) of heat transfer surface area and horizontal orientation.

Warmteoverdrachtsoppervlakte:1.95 m² (21 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:14 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Voorwaarde:In ongebruikte staat

Buy Refurbished/Rebuilt Shell and Tube Heat Exchangers for Sale

IPP stocks refurbished and rebuilt shell and tube heat exchangers that have been professionally restored to operational condition. Available from Manning & Lewis, Allegheny Bradford Corp., Le-Carbone Lorraine, and other manufacturers. Refurbished units provide restored performance with documented rebuild history.

Manning & Lewis SS 316 — 65.6 m²

Refurbished/rebuilt Manning & Lewis stainless steel 316 shell and tube heat exchanger with 65.6 m² (706 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:65.6 m² (706 ft²) surface area

Shell Material:Roestvrij staal 316

Tube Material:Roestvrij staal 316

Shell Pressure:10.3 bar (150 psi) shell side

Oriëntatie:Horizontal orientation

Voorwaarde:Refurbished/Rebuilt condition

Allegheny Bradford SS 316L — 1.02 m²

Refurbished/rebuilt Allegheny Bradford Corp. stainless steel 316L shell and tube heat exchanger with 1.02 m² (11 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:1.02 m² (11 ft²) surface area

Shell Material:Stainless Steel 304L shell

Shell Pressure:10.3 bar (150 psi) shell side

Tube Material:Stainless Steel 316L tubes

Voorwaarde:Refurbished/Rebuilt condition

Le-Carbone Lorraine GM/8 Graphite — 2 m²

Refurbished/rebuilt Le-Carbone Lorraine GM/8 graphite shell and tube heat exchanger with 2 m² (21.5 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:2 m² (21.5 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:9 bar (130 psi) shell side

Shell Material:Carbon steel shell

Voorwaarde:Refurbished/Rebuilt condition

Buy New Shell and Tube Heat Exchangers for Sale

IPP stocks a select number of new shell and tube heat exchangers for applications requiring factory-new equipment. Available from Timmerman and Perry Products Co. in stainless steel construction.

New Timmerman SS 316L — 197.4 m²

New Timmerman stainless steel 316L shell and tube heat exchanger with 197.4 m² (2,100 ft²) of heat transfer surface area and vertical orientation.

Warmteoverdrachtsoppervlakte:197.4 m² (2,100 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Shell Pressure:12 bar (174 psi) shell side

Shell Material:Stainless Steel 316 shell

Voorwaarde:Nieuwe staat

New Perry Products Co. AEU SS 304 — 105.1 m²

New Perry Products Co. AEU stainless steel 304 shell and tube heat exchanger with 105.1 m² (1,150 ft²) of heat transfer surface area.

Warmteoverdrachtsoppervlakte:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:15.7 bar (228 psi) shell side

Shell Material:Carbon steel shell

Voorwaarde:Nieuwe staat

Ready to Buy a Used Shell and Tube Heat Exchanger?

Tell us your specifications and requirements. Our team will match your needs against current shell and tube heat exchangers inventory and provide a detailed quote.

Buying Used Shell and Tube Heat Exchangers vs Buying New

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new shell and tube heat exchangers compare across key factors.

Factor	Afkomstig van IPP	Nieuw (OEM)
Apparatuurkosten	Aanzienlijke besparing ten opzichte van de nieuwprijs van de OEM.	Volledige OEM-adviesprijs
Leveringstermijn	Op voorraad zijnde artikelen klaar voor verzending.	Langere levertijden (nieuwe productie)
Materialen	Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic	Op maat gespecificeerd
Fabrikanten	VICARB, Doyle and Roth, Atlas Industrial and others	Eén OEM
milieu-impact	Verlengt de levensduur van apparatuur en vermindert afval.	Nieuw grondstoffenverbruik

Advantages of Buying Used Shell and Tube Heat Exchangers from IPP

International Process Plants combineert meer dan 46 jaar expertise in procesapparatuur, bijna 150 medewerkers in 15 landen en een voorraad van 15.000 processystemen en belangrijke apparatuuronderdelen om reactoren te leveren die direct inzetbaar zijn voor uw proces.

Aanzienlijke kostenbesparingen

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Onmiddellijke beschikbaarheid

In-stock shell and tube heat exchangers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Meerdere OEM-fabrikanten

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc. and other manufacturers. Every unit is an original OEM product with traceable provenance.

Kwaliteit en renovatie

IPP biedt revisiediensten aan via haar UGE-divisie (Universal Glasteel Equipment), opgericht in 1995, die een voorraad heeft van meer dan 700 drukvaten en meer dan 2700 onderdelen.

Wereldwijde aanwezigheid in 15 landen

IPP heeft vestigingen in 15 landen: Brazilië, Canada, China, Tsjechië, Frankrijk, Duitsland, India, Italië, Mexico, Pakistan, Portugal, Roemenië, Turkije, het Verenigd Koninkrijk en de Verenigde Staten. IPP heeft wereldwijd meer dan 160.000 klanten bediend.

Volledig assortiment materialen en specificaties

IPP stocks shell and tube heat exchangers across a wide range of specifications to match your process requirements.

How Buying a Used Shell And Tube Heat Exchanger Works

The process of purchasing used shell and tube heat exchangers from IPP follows five steps, from specification to delivery.

1

Vereisten indienen

Geef uw specificaties door: capaciteit, materiaal, drukclassificatie, temperatuur en toepassing. Of blader door onze doorzoekbare voorraad.

2

Ontvang datapakket

IPP stuurt een gedetailleerd specificatieblad met specificaties, afmetingen, een conditierapport en foto's van de apparatuur.

3

Inspecteer de apparatuur

Neem contact op met IPP om een bezoek op locatie te regelen of vraag een live videorondleiding aan met een IPP-teamlid op een van onze locaties wereldwijd.

4

Renovatieopties

IPP biedt revisiediensten aan via haar UGE-divisie (meer dan 700 schepen, meer dan 2700 onderdelen op voorraad). Neem contact op met IPP voor meer informatie over aanvullende diensten.

5

Verpakking en levering

IPP coördineert de verpakking, het inpakken in kratten, het transport en de levering naar uw fabriekslocatie. Wereldwijde verzending vanuit vestigingen in 15 landen.

Industries That Buy Used Shell and Tube Heat Exchangers

IPP supplies used shell and tube heat exchangers to manufacturers across multiple process industries worldwide.

Farmaceutisch

Chemische verwerking

Biotechnologie

Eten en drinken

Milieu

Olie en gas

Afvalwater

Fijne chemicaliën

Verf en coatings

Petrochemicaliën

Frequently Asked Questions About Buying Used Shell and Tube Heat Exchangers

Answers to the most common questions from procurement and operations teams evaluating used shell and tube heat exchangers.

How many shell and tube heat exchangers does IPP have in stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Available in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Browse the IMS inventory for current availability.

What condition grades are available for used shell and tube heat exchangers?

IPP stocks shell and tube heat exchangers in multiple conditions: Used, Unused, Refurbished/Rebuilt, New. Bekijk de actuele voorraad voor de beschikbare condities.

Does IPP sell new shell and tube heat exchangers as well as used?

Ja. IPP stocks new shell and tube heat exchangers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Neem contact op met IPP voor meer informatie over nieuwe voorraad.

Welke bouwmaterialen zijn beschikbaar?

IPP stocks shell and tube heat exchangers in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Neem contact op met IPP om de materiaaleisen voor uw toepassing te bespreken.

What manufacturers of shell and tube heat exchangers does IPP stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Bekijk de actuele voorraad om te zien welke fabrikanten beschikbaar zijn.

How much can I save buying used shell and tube heat exchangers versus new?

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. De exacte besparing is afhankelijk van de fabrikant, capaciteit, het gebruikte materiaal en de staat van het apparaat. Neem contact op met IPP voor prijsinformatie over specifieke apparaten.

How long does it take to receive shell and tube heat exchangers from IPP?

In-stock shell and tube heat exchangers are ready to ship. De GPS-dochteronderneming van IPP levert nieuwe, op maat gemaakte apparatuur met een gemiddelde levertijd van 12 tot 16 weken. IPP verzendt vanuit vestigingen in 15 landen wereldwijd.

Verzorgt IPP de verzending en het transport?

IPP coördineert het verpakken, inpakken, transport en de levering naar uw fabriekslocatie. Met vestigingen in 15 landen. En Wereldwijd meer dan 160.000 klanten bediend., IPP heeft ruime ervaring in de wereldwijde logistiek van apparatuur.

Andere soorten apparatuur van IPP

In addition to shell and tube heat exchangers, IPP stocks equipment across multiple categories for complete process solutions.

Reactoren

Verdampers

Tanks

Looking for New Shell and Tube Heat Exchangers?

IPP Group levert nieuwe apparatuur via haar dochteronderneming Gale Process Solutions (GPS), die op maat gemaakte apparatuur levert met een gemiddelde levertijd van 12-16 weken. IPP biedt ook gereviseerde apparatuur aan via haar divisie UGE (Universal Glasteel Equipment).

Ready to Buy Shell and Tube Heat Exchangers?

IPP levert al sinds 1980 hoogwaardige procesapparatuur wereldwijd en heeft meer dan 160.000 klanten. Vertel ons wat u nodig heeft en ons team zal u een passende voorraad en prijsopgave sturen.