Buy Used Shell and Tube Heat Exchangers for Sale

Buying used shell and tube heat exchangers through International Process Plants gives chemical manufacturing, pharmaceutical and food processing, oil and gas refining, and HVAC and utility operations access to tube bundles enclosed inside a cylindrical shell, where one process stream travels inside the tubes while a second stream flows across them on the shell side. Manufacturers include VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, and Graham among other OEMs. ▶

Heat transfer surface area in stock spans roughly 0.37 m² (4 ft²) on IPP# 221143 up to 1,050 m² (11,250 ft²) on IPP# 230449. Tube materials in inventory cover Stainless Steel 316, Stainless Steel 304, Stainless Steel Austenitic, Stainless Steel 321, Graphite, Carbon Steel, Tantalum, Titanium, and Hastelloy alloys. Shell construction is dominated by Carbon Steel, with Stainless Steel 316 and 304, Stainless Steel Austenitic, Stainless Steel 321, and Glasslined options also represented. Shell-side and tube-side ratings reach as high as 179.3 bar (2,600 psi) on units such as IPP# 212821. Bundle counts range from a single tube on IPP# 211622 up to 2,819 tubes on IPP# 212739, with bundle lengths reaching 18,000 mm (709 in) on IPP# 222336.

IPP carries BEM, AEU, AKU, CFT, FTA, and DEU model designations across multiple OEMs. Horizontal, vertical, and inclined orientations are all stocked, with horizontal mountings being the most common. Many units are rated for vacuum service on the shell or tube side. Condition options run from used through refurbished, unused, and brand new stock. Typical service duties include process heating and cooling, vapor condensing, and energy recovery loops. Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Filtros en stock

1980

Establecido desde

15

Países con oficinas

Sices S.p.A Stainless Steel 316L

Usado

Albach Cembell Hastelloy - Other

Usado

Perry Products Co. Stainless Steel 304

Usado

Buy Used Shell and Tube Heat Exchangers by Material

IPP stocks shell and tube heat exchangers across stainless steel, graphite, carbon steel, and specialty alloy options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Shell and Tube Heat Exchangers for Sale

IPP stocks stainless steel shell and tube heat exchangers in 316, 316L, 304, 321, and Austenitic grades. Available from Sices S.p.A, Perry Products Co., AEL Apparatebau GmbH, Graham, Doyle and Roth, and other manufacturers.

Sices S.p.A BEM/1000 x 2700 — 150 m²

Used Sices S.p.A BEM/1000 x 2700 shell and tube heat exchanger with 150 m² (1,600 ft²) of heat transfer surface area and a 762-tube bundle.

Superficie de transferencia de calor:150 m² (1,600 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Tube Number:762 tubes

Longitud del tubo:2,700 mm (106.3 in) length

Presión del tubo:20 bar (290 psi) tube side

Fabricante:Sices S.p.A BEM/1000

Modelo:2700

Perry Products Co. AEU — 105 m²

New Perry Products Co. AEU shell and tube heat exchanger built in Stainless Steel 304 with 105.1 m² (1,150 ft²) of heat transfer surface area.

Superficie de transferencia de calor:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Tube Number:197 tubes

Longitud del tubo:4,250 mm (167.3 in) length

Presión del tubo:75.6 bar (1,100 psi) tube side

Condición:Estado nuevo

AEL Apparatebau BEM — 221 m²

Used AEL Apparatebau GmbH BEM shell and tube heat exchanger built in Stainless Steel 904L with 221 m² (2,400 ft²) of heat transfer surface area.

Superficie de transferencia de calor:221 m² (2,400 ft²) surface area

Tube Material:Stainless Steel 904L tubes

Tube Number:574 tubes

Longitud del tubo:5,000 mm (196.9 in) length

Presión del tubo:6 bar (87 psi) tube side

Fabricante:AEL Apparatebau GmbH

Modelo:BEM

Buy Used Graphite Shell and Tube Heat Exchangers for Sale

IPP stocks graphite shell and tube heat exchangers. Available from VICARB, Sigri, Graphite Apparatebau and other manufacturers.

Carbone of America Corp. Graphite

Unused Carbone of America Corp. Graphite heat exchanger.

Material:Graphite

Condición:Estado sin usar

Fabricante:Carbone of America Corp.

Modelo:PYT44-283-18

SGL Carbon Graphite

Used SGL Carbon Graphite heat exchanger.

Material:Graphite

Condición:Estado usado

Fabricante:SGL Carbon

Modelo:RS77-1-595.601

Buy Used Carbon Steel Shell and Tube Heat Exchangers for Sale

IPP stocks carbon steel shell and tube heat exchangers. Available from Delta Tee International Inc., Johnson Hunt LTD, Graham and other manufacturers.

Atlas Industrial Carbon Steel

Used Atlas Industrial Carbon Steel heat exchanger.

Material:Acero carbono

Condición:Estado usado

Western Supply Carbon Steel

Used Western Supply Carbon Steel heat exchanger.

Material:Acero carbono

Condición:Estado usado

Fabricante:Western Supply

Modelo:BEM

Buy Used Other Shell and Tube Heat Exchangers for Sale

IPP stocks other shell and tube heat exchangers. Available from DeDietrich, , Tranter-Superchanger and other manufacturers.

Albach Cembell Hastelloy - Other

Used Albach Cembell Hastelloy – Other heat exchanger.

Material:Hastelloy – Other

Condición:Estado usado

Fabricante:Albach Cembell

Modelo:29-129 BEM

Atlas Industrial Hastelloy - Other

Used Atlas Industrial Hastelloy – Other heat exchanger.

Material:Hastelloy – Other

Condición:Estado usado

Fabricante:Atlas Industrial

Modelo:BEM 20-60

Buy Used Shell and Tube Heat Exchangers by Manufacturer

IPP stocks shell and tube heat exchangers from a wide range of manufacturers, with VICARB and Doyle and Roth representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts availability.

Buy Used VICARB Shell and Tube Heat Exchangers for Sale

VICARB is the deepest single-manufacturer position in IPP’s shell and tube heat exchanger inventory. Available VICARB models include FTA 20 and FTA20/24/26 series units, primarily in graphite construction for corrosion-resistant heat transfer applications.

VICARB FTA 20 Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Shell Material:Carbon steel shell

Condición:Estado usado

VICARB FTA20/24/26 Graphite — 12.1 m²

Used VICARB FTA20/24/26 graphite shell and tube heat exchanger with 12.1 m² (130 ft²) of heat transfer surface area.

Superficie de transferencia de calor:12.1 m² (130 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Condición:Estado usado

VICARB Graphite — 23.3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:23.3 m² (250.8 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Condición:Estado usado

Buy Used Doyle and Roth Shell and Tube Heat Exchangers for Sale

Doyle and Roth is the second deepest OEM position in IPP’s shell and tube heat exchanger inventory. Available in stainless steel 304 and Inconel construction for demanding process environments.

Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Shell Material:Stainless Steel 316 shell

Condición:Estado usado

Doyle and Roth Inconel — 8.6 m²

Used Doyle and Roth Inconel shell and tube heat exchanger with 8.6 m² (93 ft²) of heat transfer surface area for high-temperature corrosion-resistant service.

Superficie de transferencia de calor:8.6 m² (93 ft²) surface area

Tube Material:Inconel tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Condición:Estado usado

Doyle and Roth SS 304 — 68.1 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 68.1 m² (733 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:68.1 m² (733 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Condición:Estado usado

Buy Used Shell and Tube Heat Exchangers from Other Manufacturers

Beyond VICARB and Doyle and Roth, IPP stocks shell and tube heat exchangers from Atlas Industrial, Delta Tee International Inc., Graham, Meccanica Sardia, Pfaudler, Johnson Hunt LTD, Manning & Lewis, and other manufacturers. These units span the full range of materials, surface areas, and pressure ratings.

Exchangeurs De Chaleur S.A.G. SS 304 — 16.8 m²

Used Exchangeurs De Chaleur S.A.G. stainless steel 304 shell and tube heat exchanger with 16.8 m² (180.8 ft²) of heat transfer surface area in vertical orientation.

Superficie de transferencia de calor:16.8 m² (180.8 ft²) surface area

Shell Material:Stainless Steel 304 shell

Shell Pressure:6 bar (87 psi) shell side

Tube Number:56 tubes

Longitud del tubo:1,850 mm (72.8 in) length

Condición:Estado usado

Johnson Hunt LTD BEU Carbon Steel — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger with 6.4 m² (69 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:6.4 m² (69 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:44 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Condición:Estado sin usar

Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:83.8 m² (902 ft²) surface area

Material:Construcción de acero inoxidable

Orientación:Orientación horizontal

Fabricante:Graham manufacturer

Condición:Estado usado

Buy Used Shell and Tube Heat Exchangers by Condition

IPP stocks shell and tube heat exchangers in multiple condition grades, including used, unused, refurbished/rebuilt, and new. Choose the condition that matches your budget and performance requirements.

Buy Used Shell and Tube Heat Exchangers for Sale

Used shell and tube heat exchangers represent the largest condition category in IPP’s inventory. Available from VICARB, Doyle and Roth, Graham, Atlas Industrial, and other manufacturers in stainless steel, graphite, carbon steel, and specialty alloy construction. Used condition offers the lowest price point while providing OEM-quality vessels.

Used VICARB Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Superficie de transferencia de calor:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Fabricante:VICARB

Modelo:FTA 20

Condición:Estado usado

Used Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area.

Superficie de transferencia de calor:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Fabricante:Doyle and Roth

Condición:Estado usado

Used Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:83.8 m² (902 ft²) surface area

Material:Construcción de acero inoxidable

Orientación:Orientación horizontal

Fabricante:Graham manufacturer

Condición:Estado usado

Buy Unused Shell and Tube Heat Exchangers for Sale

IPP stocks unused shell and tube heat exchangers — units that were manufactured but never placed into service. Johnson Hunt LTD is the most frequently available manufacturer for unused shell and tube heat exchangers in IPP’s inventory. Unused condition provides factory-new performance at reduced lead time compared to ordering new.

Unused Johnson Hunt LTD BEU — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Superficie de transferencia de calor:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Fabricante:VICARB

Modelo:FTA 20

Condición:Estado usado

Unused Johnson Hunt LTD AEM — 1.58 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.58 m² (17 ft²) of heat transfer surface area.

Superficie de transferencia de calor:1.58 m² (17 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:26 bar (377 psi) shell side

Tube Number:11 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Condición:Estado sin usar

Unused Johnson Hunt LTD AEM — 1.95 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.95 m² (21 ft²) of heat transfer surface area and horizontal orientation.

Superficie de transferencia de calor:1.95 m² (21 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:14 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

Condición:Estado sin usar

Buy Refurbished/Rebuilt Shell and Tube Heat Exchangers for Sale

IPP stocks refurbished and rebuilt shell and tube heat exchangers that have been professionally restored to operational condition. Available from Manning & Lewis, Allegheny Bradford Corp., Le-Carbone Lorraine, and other manufacturers. Refurbished units provide restored performance with documented rebuild history.

Manning & Lewis SS 316 — 65.6 m²

Refurbished/rebuilt Manning & Lewis stainless steel 316 shell and tube heat exchanger with 65.6 m² (706 ft²) of heat transfer surface area.

Superficie de transferencia de calor:65.6 m² (706 ft²) surface area

Shell Material:Acero inoxidable 316

Tube Material:Acero inoxidable 316

Shell Pressure:10.3 bar (150 psi) shell side

Orientación:Orientación horizontal

Condición:Estado reacondicionado/reconstruido

Allegheny Bradford SS 316L — 1.02 m²

Refurbished/rebuilt Allegheny Bradford Corp. stainless steel 316L shell and tube heat exchanger with 1.02 m² (11 ft²) of heat transfer surface area.

Superficie de transferencia de calor:1.02 m² (11 ft²) surface area

Shell Material:Stainless Steel 304L shell

Shell Pressure:10.3 bar (150 psi) shell side

Tube Material:Stainless Steel 316L tubes

Condición:Estado reacondicionado/reconstruido

Le-Carbone Lorraine GM/8 Graphite — 2 m²

Refurbished/rebuilt Le-Carbone Lorraine GM/8 graphite shell and tube heat exchanger with 2 m² (21.5 ft²) of heat transfer surface area.

Superficie de transferencia de calor:2 m² (21.5 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:9 bar (130 psi) shell side

Shell Material:Carbon steel shell

Condición:Estado reacondicionado/reconstruido

Buy New Shell and Tube Heat Exchangers for Sale

IPP stocks a select number of new shell and tube heat exchangers for applications requiring factory-new equipment. Available from Timmerman and Perry Products Co. in stainless steel construction.

New Timmerman SS 316L — 197.4 m²

New Timmerman stainless steel 316L shell and tube heat exchanger with 197.4 m² (2,100 ft²) of heat transfer surface area and vertical orientation.

Superficie de transferencia de calor:197.4 m² (2,100 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Shell Pressure:12 bar (174 psi) shell side

Shell Material:Stainless Steel 316 shell

Condición:Estado nuevo

New Perry Products Co. AEU SS 304 — 105.1 m²

New Perry Products Co. AEU stainless steel 304 shell and tube heat exchanger with 105.1 m² (1,150 ft²) of heat transfer surface area.

Superficie de transferencia de calor:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:15.7 bar (228 psi) shell side

Shell Material:Carbon steel shell

Condición:Estado nuevo

Ready to Buy a Used Shell and Tube Heat Exchanger?

Tell us your specifications and requirements. Our team will match your needs against current shell and tube heat exchangers inventory and provide a detailed quote.

Buying Used Shell and Tube Heat Exchangers vs Buying New

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new shell and tube heat exchangers compare across key factors.

Factor	Utilizado desde IPP	Nuevo (OEM)
Costo del equipo	Ahorro significativo en comparación con el precio de un producto nuevo del fabricante.	Precio de lista completo del fabricante
Cronograma de entrega	Unidades en stock listas para enviar	Plazos de entrega prolongados (fabricación nueva)
Materiales	Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic	Especificado a medida
Fabricantes	VICARB, Doyle and Roth, Atlas Industrial and others	Fabricante de equipos originales único
Impacto ambiental	Prolonga la vida útil de los equipos y reduce los residuos.	Consumo de nuevas materias primas

Advantages of Buying Used Shell and Tube Heat Exchangers from IPP

International Process Plants combina más de 46 años de experiencia en equipos de proceso, cerca de 150 empleados en 15 países y un inventario de 15.000 sistemas de proceso y piezas de equipos principales para ofrecer reactores listos para su proceso.

Ahorro de costes significativo

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilidad inmediata

In-stock shell and tube heat exchangers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Múltiples fabricantes de equipos originales (OEM)

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc. and other manufacturers. Every unit is an original OEM product with traceable provenance.

Calidad y Remodelación

IPP ofrece servicios de reacondicionamiento a través de su división UGE (Universal Glasteel Equipment), fundada en 1995, que cuenta con un stock de más de 700 recipientes y más de 2700 piezas.

Presencia global en 15 países.

IPP cuenta con oficinas en 15 países: Brasil, Canadá, China, República Checa, Francia, Alemania, India, Italia, México, Pakistán, Portugal, Rumania, Turquía, Reino Unido y Estados Unidos. IPP ha prestado servicios a más de 160 000 clientes en todo el mundo.

Amplia gama de materiales y especificaciones.

IPP stocks shell and tube heat exchangers across a wide range of specifications to match your process requirements.

How Buying a Used Shell And Tube Heat Exchanger Works

The process of purchasing used shell and tube heat exchangers from IPP follows five steps, from specification to delivery.

1

Enviar requisitos

Comparta sus especificaciones: capacidad, material de construcción, presión nominal, temperatura y aplicación. O explore nuestro catálogo con función de búsqueda.

2

Recibir paquete de datos

IPP envía una ficha técnica detallada del equipo con especificaciones, dimensiones, informe de estado y fotografías.

3

Inspeccione el equipo.

Póngase en contacto con IPP para concertar una visita in situ o solicitar un recorrido virtual en directo con un miembro del equipo de IPP en una de nuestras ubicaciones globales.

4

Opciones de renovación

IPP ofrece servicios de reacondicionamiento a través de su división UGE (más de 700 buques, más de 2700 piezas en stock). Póngase en contacto con IPP para obtener más información sobre servicios adicionales.

5

Embalaje y entrega

IPP coordina el embalaje, el empaquetado, el transporte y la entrega en su planta. Envíos internacionales desde oficinas en 15 países.

Industries That Buy Used Shell and Tube Heat Exchangers

IPP supplies used shell and tube heat exchangers to manufacturers across multiple process industries worldwide.

Farmacéutico

Procesamiento químico

Biotecnología

Alimentos y bebidas

Ambiental

Petróleo y gas

aguas residuales

Productos químicos finos

Pinturas y recubrimientos

Petroquímicos

Frequently Asked Questions About Buying Used Shell and Tube Heat Exchangers

Answers to the most common questions from procurement and operations teams evaluating used shell and tube heat exchangers.

How many shell and tube heat exchangers does IPP have in stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Available in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Browse the IMS inventory for current availability.

What condition grades are available for used shell and tube heat exchangers?

IPP stocks shell and tube heat exchangers in multiple conditions: Used, Unused, Refurbished/Rebuilt, New. Consulte el inventario actual para ver las opciones de estado disponibles.

Does IPP sell new shell and tube heat exchangers as well as used?

Sí. IPP stocks new shell and tube heat exchangers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Póngase en contacto con IPP para obtener más información sobre el nuevo inventario.

¿Qué materiales de construcción están disponibles?

IPP stocks shell and tube heat exchangers in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Póngase en contacto con IPP para hablar sobre los requisitos de materiales para su aplicación.

What manufacturers of shell and tube heat exchangers does IPP stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Consulte el inventario actual para ver los fabricantes disponibles.

How much can I save buying used shell and tube heat exchangers versus new?

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. El ahorro exacto depende del fabricante, la capacidad, el material de construcción y el estado del equipo. Para conocer los precios de unidades específicas, póngase en contacto con IPP.

How long does it take to receive shell and tube heat exchangers from IPP?

In-stock shell and tube heat exchangers are ready to ship. La filial GPS de IPP proporciona equipos nuevos fabricados a medida con un plazo de entrega promedio de 12 a 16 semanas. IPP realiza envíos desde oficinas en 15 países de todo el mundo.

¿IPP se encarga del envío y el transporte de mercancías?

IPP coordina el embalaje, el empaquetado, el transporte y la entrega en su planta. Con oficinas en 15 países. y Más de 160.000 clientes atendidos en todo el mundo., IPP cuenta con una amplia experiencia en logística global de equipos.

Otros tipos de equipos de IPP

In addition to shell and tube heat exchangers, IPP stocks equipment across multiple categories for complete process solutions.

Reactores

Evaporadores

Tanques

Looking for New Shell and Tube Heat Exchangers?

IPP Group suministra equipos nuevos a través de su filial Gale Process Solutions (GPS), que ofrece equipos fabricados a medida con un plazo de entrega promedio de 12 a 16 semanas. IPP también ofrece equipos reacondicionados mediante su división UGE (Universal Glasteel Equipment).

Ready to Buy Shell and Tube Heat Exchangers?

Desde 1980, IPP suministra equipos de proceso de alta calidad a nivel mundial, atendiendo a más de 160 000 clientes. Díganos qué necesita: nuestro equipo le ofrecerá el inventario y los precios que mejor se ajusten a sus necesidades.