Buy Used Shell and Tube Heat Exchangers for Sale

Buying used shell and tube heat exchangers through International Process Plants gives chemical manufacturing, pharmaceutical and food processing, oil and gas refining, and HVAC and utility operations access to tube bundles enclosed inside a cylindrical shell, where one process stream travels inside the tubes while a second stream flows across them on the shell side. Manufacturers include VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, and Graham among other OEMs. ▶

Heat transfer surface area in stock spans roughly 0.37 m² (4 ft²) on IPP# 221143 up to 1,050 m² (11,250 ft²) on IPP# 230449. Tube materials in inventory cover Stainless Steel 316, Stainless Steel 304, Stainless Steel Austenitic, Stainless Steel 321, Graphite, Carbon Steel, Tantalum, Titanium, and Hastelloy alloys. Shell construction is dominated by Carbon Steel, with Stainless Steel 316 and 304, Stainless Steel Austenitic, Stainless Steel 321, and Glasslined options also represented. Shell-side and tube-side ratings reach as high as 179.3 bar (2,600 psi) on units such as IPP# 212821. Bundle counts range from a single tube on IPP# 211622 up to 2,819 tubes on IPP# 212739, with bundle lengths reaching 18,000 mm (709 in) on IPP# 222336.

IPP carries BEM, AEU, AKU, CFT, FTA, and DEU model designations across multiple OEMs. Horizontal, vertical, and inclined orientations are all stocked, with horizontal mountings being the most common. Many units are rated for vacuum service on the shell or tube side. Condition options run from used through refurbished, unused, and brand new stock. Typical service duties include process heating and cooling, vapor condensing, and energy recovery loops. Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Filters in Stock

1980

Kuruluşundan bu yana

15

Ofisleri bulunan ülkeler

Sices S.p.A Stainless Steel 316L

Kullanılmış

Albach Cembell Hastelloy - Other

Kullanılmış

Perry Products Co. Stainless Steel 304

Kullanılmış

Buy Used Shell and Tube Heat Exchangers by Material

IPP stocks shell and tube heat exchangers across stainless steel, graphite, carbon steel, and specialty alloy options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Shell and Tube Heat Exchangers for Sale

IPP stocks stainless steel shell and tube heat exchangers in 316, 316L, 304, 321, and Austenitic grades. Available from Sices S.p.A, Perry Products Co., AEL Apparatebau GmbH, Graham, Doyle and Roth, and other manufacturers.

Sices S.p.A BEM/1000 x 2700 — 150 m²

Used Sices S.p.A BEM/1000 x 2700 shell and tube heat exchanger with 150 m² (1,600 ft²) of heat transfer surface area and a 762-tube bundle.

Isı Transfer Yüzey Alanı:150 m² (1,600 ft²) surface area

Boru Malzemesi:Stainless Steel 316 tubes

Tube Number:762 tubes

Boru Uzunluğu:2,700 mm (106.3 in) length

Tüp Basıncı:20 bar (290 psi) tube side

Üretici:Sices S.p.A BEM/1000

Model:2700

Perry Products Co. AEU — 105 m²

New Perry Products Co. AEU shell and tube heat exchanger built in Stainless Steel 304 with 105.1 m² (1,150 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:105.1 m² (1,150 ft²) surface area

Boru Malzemesi:Stainless Steel 304 tubes

Tube Number:197 tubes

Boru Uzunluğu:4,250 mm (167.3 in) length

Tüp Basıncı:75.6 bar (1,100 psi) tube side

Durum:Yeni durumda

AEL Apparatebau BEM — 221 m²

Used AEL Apparatebau GmbH BEM shell and tube heat exchanger built in Stainless Steel 904L with 221 m² (2,400 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:221 m² (2,400 ft²) surface area

Boru Malzemesi:Stainless Steel 904L tubes

Tube Number:574 tubes

Boru Uzunluğu:5,000 mm (196.9 in) length

Tüp Basıncı:6 bar (87 psi) tube side

Üretici:AEL Apparatebau GmbH

Model:BEM

Buy Used Graphite Shell and Tube Heat Exchangers for Sale

IPP stocks graphite shell and tube heat exchangers. Available from VICARB, Sigri, Graphite Apparatebau and other manufacturers.

Carbone of America Corp. Graphite

Unused Carbone of America Corp. Graphite heat exchanger.

Malzeme:Graphite

Durum:Kullanılmamış durumda

Üretici:Carbone of America Corp.

Model:PYT44-283-18

SGL Carbon Graphite

Used SGL Carbon Graphite heat exchanger.

Malzeme:Graphite

Durum:Kullanılmış durumda

Üretici:SGL Carbon

Model:RS77-1-595.601

Buy Used Carbon Steel Shell and Tube Heat Exchangers for Sale

IPP stocks carbon steel shell and tube heat exchangers. Available from Delta Tee International Inc., Johnson Hunt LTD, Graham and other manufacturers.

Atlas Industrial Carbon Steel

Used Atlas Industrial Carbon Steel heat exchanger.

Malzeme:Karbon Çelik

Durum:Kullanılmış durumda

Western Supply Carbon Steel

Used Western Supply Carbon Steel heat exchanger.

Malzeme:Karbon Çelik

Durum:Kullanılmış durumda

Üretici:Western Supply

Model:BEM

Buy Used Other Shell and Tube Heat Exchangers for Sale

IPP stocks other shell and tube heat exchangers. Available from DeDietrich, , Tranter-Superchanger and other manufacturers.

Albach Cembell Hastelloy - Other

Used Albach Cembell Hastelloy – Other heat exchanger.

Malzeme:Hastelloy – Other

Durum:Kullanılmış durumda

Üretici:Albach Cembell

Model:29-129 BEM

Atlas Industrial Hastelloy - Other

Used Atlas Industrial Hastelloy – Other heat exchanger.

Malzeme:Hastelloy – Other

Durum:Kullanılmış durumda

Üretici:Atlas Industrial

Model:BEM 20-60

Buy Used Shell and Tube Heat Exchangers by Manufacturer

IPP stocks shell and tube heat exchangers from a wide range of manufacturers, with VICARB and Doyle and Roth representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts availability.

Buy Used VICARB Shell and Tube Heat Exchangers for Sale

VICARB is the deepest single-manufacturer position in IPP’s shell and tube heat exchanger inventory. Available VICARB models include FTA 20 and FTA20/24/26 series units, primarily in graphite construction for corrosion-resistant heat transfer applications.

VICARB FTA 20 Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:6.4 m² (68.9 ft²) surface area

Boru Malzemesi:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Shell Material:Carbon steel shell

Durum:Kullanılmış durumda

VICARB FTA20/24/26 Graphite — 12.1 m²

Used VICARB FTA20/24/26 graphite shell and tube heat exchanger with 12.1 m² (130 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:12.1 m² (130 ft²) surface area

Boru Malzemesi:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Durum:Kullanılmış durumda

VICARB Graphite — 23.3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:23.3 m² (250.8 ft²) surface area

Boru Malzemesi:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

Durum:Kullanılmış durumda

Buy Used Doyle and Roth Shell and Tube Heat Exchangers for Sale

Doyle and Roth is the second deepest OEM position in IPP’s shell and tube heat exchanger inventory. Available in stainless steel 304 and Inconel construction for demanding process environments.

Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:10.4 m² (112 ft²) surface area

Boru Malzemesi:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Shell Material:Stainless Steel 316 shell

Durum:Kullanılmış durumda

Doyle and Roth Inconel — 8.6 m²

Used Doyle and Roth Inconel shell and tube heat exchanger with 8.6 m² (93 ft²) of heat transfer surface area for high-temperature corrosion-resistant service.

Isı Transfer Yüzey Alanı:8.6 m² (93 ft²) surface area

Boru Malzemesi:Inconel tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Durum:Kullanılmış durumda

Doyle and Roth SS 304 — 68.1 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 68.1 m² (733 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:68.1 m² (733 ft²) surface area

Boru Malzemesi:Stainless Steel 304 tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

Durum:Kullanılmış durumda

Buy Used Shell and Tube Heat Exchangers from Other Manufacturers

Beyond VICARB and Doyle and Roth, IPP stocks shell and tube heat exchangers from Atlas Industrial, Delta Tee International Inc., Graham, Meccanica Sardia, Pfaudler, Johnson Hunt LTD, Manning & Lewis, and other manufacturers. These units span the full range of materials, surface areas, and pressure ratings.

Exchangeurs De Chaleur S.A.G. SS 304 — 16.8 m²

Used Exchangeurs De Chaleur S.A.G. stainless steel 304 shell and tube heat exchanger with 16.8 m² (180.8 ft²) of heat transfer surface area in vertical orientation.

Isı Transfer Yüzey Alanı:16.8 m² (180.8 ft²) surface area

Shell Material:Stainless Steel 304 shell

Shell Pressure:6 bar (87 psi) shell side

Tube Number:56 tubes

Boru Uzunluğu:1,850 mm (72.8 in) length

Durum:Kullanılmış durumda

Johnson Hunt LTD BEU Carbon Steel — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger with 6.4 m² (69 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:6.4 m² (69 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:44 tubes

Boru Çapı:19.1 mm (0.8 in) diameter

Durum:Kullanılmamış durumda

Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:83.8 m² (902 ft²) surface area

Malzeme:Stainless steel construction

Yönlendirme:Yatay yönlendirme

Üretici:Graham manufacturer

Durum:Kullanılmış durumda

Buy Used Shell and Tube Heat Exchangers by Condition

IPP stocks shell and tube heat exchangers in multiple condition grades, including used, unused, refurbished/rebuilt, and new. Choose the condition that matches your budget and performance requirements.

Buy Used Shell and Tube Heat Exchangers for Sale

Used shell and tube heat exchangers represent the largest condition category in IPP’s inventory. Available from VICARB, Doyle and Roth, Graham, Atlas Industrial, and other manufacturers in stainless steel, graphite, carbon steel, and specialty alloy construction. Used condition offers the lowest price point while providing OEM-quality vessels.

Used VICARB Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:6.4 m² (68.9 ft²) surface area

Boru Malzemesi:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Üretici:VICARB

Model:FTA 20

Durum:Kullanılmış durumda

Used Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:10.4 m² (112 ft²) surface area

Boru Malzemesi:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Üretici:Doyle and Roth

Durum:Kullanılmış durumda

Used Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:83.8 m² (902 ft²) surface area

Malzeme:Stainless steel construction

Yönlendirme:Yatay yönlendirme

Üretici:Graham manufacturer

Durum:Kullanılmış durumda

Buy Unused Shell and Tube Heat Exchangers for Sale

IPP stocks unused shell and tube heat exchangers — units that were manufactured but never placed into service. Johnson Hunt LTD is the most frequently available manufacturer for unused shell and tube heat exchangers in IPP’s inventory. Unused condition provides factory-new performance at reduced lead time compared to ordering new.

Unused Johnson Hunt LTD BEU — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:6.4 m² (68.9 ft²) surface area

Boru Malzemesi:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Üretici:VICARB

Model:FTA 20

Durum:Kullanılmış durumda

Unused Johnson Hunt LTD AEM — 1.58 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.58 m² (17 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:1.58 m² (17 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:26 bar (377 psi) shell side

Tube Number:11 tubes

Boru Çapı:19.1 mm (0.8 in) diameter

Durum:Kullanılmamış durumda

Unused Johnson Hunt LTD AEM — 1.95 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.95 m² (21 ft²) of heat transfer surface area and horizontal orientation.

Isı Transfer Yüzey Alanı:1.95 m² (21 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:14 tubes

Boru Çapı:19.1 mm (0.8 in) diameter

Durum:Kullanılmamış durumda

Buy Refurbished/Rebuilt Shell and Tube Heat Exchangers for Sale

IPP stocks refurbished and rebuilt shell and tube heat exchangers that have been professionally restored to operational condition. Available from Manning & Lewis, Allegheny Bradford Corp., Le-Carbone Lorraine, and other manufacturers. Refurbished units provide restored performance with documented rebuild history.

Manning & Lewis SS 316 — 65.6 m²

Refurbished/rebuilt Manning & Lewis stainless steel 316 shell and tube heat exchanger with 65.6 m² (706 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:65.6 m² (706 ft²) surface area

Shell Material:Paslanmaz Çelik 316

Boru Malzemesi:Paslanmaz Çelik 316

Shell Pressure:10.3 bar (150 psi) shell side

Yönlendirme:Yatay yönlendirme

Durum:Yenilenmiş/Yeniden inşa edilmiş durumda

Allegheny Bradford SS 316L — 1.02 m²

Refurbished/rebuilt Allegheny Bradford Corp. stainless steel 316L shell and tube heat exchanger with 1.02 m² (11 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:1.02 m² (11 ft²) surface area

Shell Material:Stainless Steel 304L shell

Shell Pressure:10.3 bar (150 psi) shell side

Boru Malzemesi:Stainless Steel 316L tubes

Durum:Yenilenmiş/Yeniden inşa edilmiş durumda

Le-Carbone Lorraine GM/8 Graphite — 2 m²

Refurbished/rebuilt Le-Carbone Lorraine GM/8 graphite shell and tube heat exchanger with 2 m² (21.5 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:2 m² (21.5 ft²) surface area

Boru Malzemesi:Graphite tubes

Shell Pressure:9 bar (130 psi) shell side

Shell Material:Carbon steel shell

Durum:Yenilenmiş/Yeniden inşa edilmiş durumda

Buy New Shell and Tube Heat Exchangers for Sale

IPP stocks a select number of new shell and tube heat exchangers for applications requiring factory-new equipment. Available from Timmerman and Perry Products Co. in stainless steel construction.

New Timmerman SS 316L — 197.4 m²

New Timmerman stainless steel 316L shell and tube heat exchanger with 197.4 m² (2,100 ft²) of heat transfer surface area and vertical orientation.

Isı Transfer Yüzey Alanı:197.4 m² (2,100 ft²) surface area

Boru Malzemesi:Stainless Steel 316 tubes

Shell Pressure:12 bar (174 psi) shell side

Shell Material:Stainless Steel 316 shell

Durum:Yeni durumda

New Perry Products Co. AEU SS 304 — 105.1 m²

New Perry Products Co. AEU stainless steel 304 shell and tube heat exchanger with 105.1 m² (1,150 ft²) of heat transfer surface area.

Isı Transfer Yüzey Alanı:105.1 m² (1,150 ft²) surface area

Boru Malzemesi:Stainless Steel 304 tubes

Shell Pressure:15.7 bar (228 psi) shell side

Shell Material:Carbon steel shell

Durum:Yeni durumda

Ready to Buy a Used Shell and Tube Heat Exchanger?

Tell us your specifications and requirements. Our team will match your needs against current shell and tube heat exchangers inventory and provide a detailed quote.

Buying Used Shell and Tube Heat Exchangers vs Buying New

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new shell and tube heat exchangers compare across key factors.

Faktör	IPP'den alınmıştır.	Yeni (OEM)
Ekipman Maliyeti	Yeni orijinal ekipman üreticisinin fiyatına kıyasla önemli ölçüde tasarruf	Tam OEM liste fiyatı
Teslimat Zaman Çizelgesi	Stokta bulunan ve gönderime hazır ürünler.	Uzun teslim süreleri (yeni üretim)
Malzemeler	Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic	Özel olarak belirtilmiş
Üreticiler	VICARB, Doyle and Roth, Atlas Industrial and others	Tek OEM
Çevresel Etki	Ekipmanların kullanım ömrünü uzatır, atıkları azaltır.	Yeni hammadde tüketimi

Advantages of Buying Used Shell and Tube Heat Exchangers from IPP

International Process Plants, 46 yılı aşkın proses ekipmanı uzmanlığını, 15 ülkede yaklaşık 150 çalışanını ve 15.000 proses sistemi ve ana ekipman parçasından oluşan envanterini bir araya getirerek, prosesinize hazır reaktörler sunmaktadır.

Önemli Maliyet Tasarrufu

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Hemen Kullanılabilirlik

In-stock shell and tube heat exchangers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Birden fazla OEM üreticisi

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc. and other manufacturers. Every unit is an original OEM product with traceable provenance.

Kalite ve Yenileme

IPP, 1995 yılında kurulan ve 700'den fazla tank ve 2.700'den fazla parça stoğuna sahip UGE (Universal Glasteel Equipment) bölümü aracılığıyla yenileme hizmetleri sunmaktadır.

15 Ülkede Küresel Varlık

IPP'nin 15 ülkede ofisi bulunmaktadır: Brezilya, Kanada, Çin, Çek Cumhuriyeti, Fransa, Almanya, Hindistan, İtalya, Meksika, Pakistan, Portekiz, Romanya, Türkiye, Birleşik Krallık ve Amerika Birleşik Devletleri. IPP, dünya çapında 160.000'den fazla müşteriye hizmet vermiştir.

Geniş Malzeme ve Özellik Yelpazesi

IPP stocks shell and tube heat exchangers across a wide range of specifications to match your process requirements.

How Buying a Used Shell And Tube Heat Exchanger Works

The process of purchasing used shell and tube heat exchangers from IPP follows five steps, from specification to delivery.

1

Gerekli Belgeleri Gönderin

Kapasite, yapım malzemesi, basınç değeri, sıcaklık ve kullanım alanı gibi özelliklerinizi paylaşın. Veya arama yapılabilir envanterimize göz atın.

2

Veri Paketini Al

IPP, teknik özellikler, boyutlar, durum raporu ve fotoğraflar içeren ayrıntılı bir ekipman veri sayfası gönderir.

3

Ekipmanı inceleyin.

Yerinde ziyaret ayarlamak veya küresel lokasyonlarımızdan birinde bir IPP ekip üyesiyle canlı video turu talep etmek için IPP ile iletişime geçin.

4

Yenileme Seçenekleri

IPP, UGE bölümü aracılığıyla yenileme hizmetleri sunmaktadır (700'den fazla tank, stokta 2.700'den fazla parça). Ek hizmetler hakkında ayrıntılı bilgi için IPP ile iletişime geçin.

5

Paketleme ve Teslimat

IPP, paketleme, sandıklama, nakliye ve tesis sahanıza teslimatı koordine eder. 15 ülkedeki ofislerden dünya çapında gönderim yapılmaktadır.

Industries That Buy Used Shell and Tube Heat Exchangers

IPP supplies used shell and tube heat exchangers to manufacturers across multiple process industries worldwide.

İlaç

Kimyasal İşleme

Biyoteknoloji

Yiyecek ve İçecek

Çevresel

Petrol ve Doğalgaz

Atıksu

İnce Kimyasallar

Boyalar ve Kaplamalar

Petrokimyasallar

Frequently Asked Questions About Buying Used Shell and Tube Heat Exchangers

Answers to the most common questions from procurement and operations teams evaluating used shell and tube heat exchangers.

How many shell and tube heat exchangers does IPP have in stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Available in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Browse the IMS inventory for current availability.

What condition grades are available for used shell and tube heat exchangers?

IPP stocks shell and tube heat exchangers in multiple conditions: Used, Unused, Refurbished/Rebuilt, New. Mevcut stok durumunu inceleyerek yeni ürün seçeneklerine göz atın.

Does IPP sell new shell and tube heat exchangers as well as used?

Evet. IPP stocks new shell and tube heat exchangers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Yeni ürünler hakkında detaylı bilgi için IPP ile iletişime geçin.

Hangi yapı malzemeleri mevcuttur?

IPP stocks shell and tube heat exchangers in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. Başvurunuz için gerekli malzeme şartlarını görüşmek üzere IPP ile iletişime geçin.

What manufacturers of shell and tube heat exchangers does IPP stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. Mevcut üreticileri görmek için güncel envantere göz atın.

How much can I save buying used shell and tube heat exchangers versus new?

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Kesin tasarruf miktarı üreticiye, kapasiteye, yapım malzemesine ve durumuna bağlıdır. Belirli ünitelerin fiyatlandırması için IPP ile iletişime geçin.

How long does it take to receive shell and tube heat exchangers from IPP?

In-stock shell and tube heat exchangers are ready to ship. IPP'nin GPS yan kuruluşu, ortalama 12-16 haftalık teslimat süresiyle yeni, özel olarak üretilmiş ekipmanlar sağlamaktadır. IPP, dünya genelinde 15 ülkedeki ofislerinden gönderim yapmaktadır.

IPP nakliye ve kargo işlemlerini üstleniyor mu?

IPP, paketleme, sandıklama, nakliye ve tesis sahanıza teslimat işlemlerini koordine eder. 15 ülkede ofisleri bulunmaktadır. Ve Dünya çapında 160.000'den fazla müşteriye hizmet verildi., IPP, küresel ekipman lojistiği konusunda geniş deneyime sahiptir.

IPP'den Diğer Ekipman Türleri

In addition to shell and tube heat exchangers, IPP stocks equipment across multiple categories for complete process solutions.

Reaktörler

Buharlaştırıcılar

Tanklar

Looking for New Shell and Tube Heat Exchangers?

IPP Group, yeni ekipmanları, ortalama 12-16 haftalık teslimat süresiyle özel olarak üretilmiş ekipmanlar sağlayan Gale Process Solutions (GPS) iştiraki aracılığıyla tedarik etmektedir. IPP ayrıca UGE (Universal Glasteel Equipment) bölümü aracılığıyla yeniden camlanmış ekipmanlar da sunmaktadır.

Ready to Buy Shell and Tube Heat Exchangers?

IPP, 1980'den beri dünya çapında 160.000'den fazla müşteriye kaliteli proses ekipmanı tedarik etmektedir. İhtiyaçlarınızı bize bildirin; ekibimiz size uygun stok ve fiyatlarla yanıt verecektir.