İkinci el ısı eşanjörleri satın alın

Buying used heat exchangers through International Process Plants gives chemical, pharmaceutical, petrochemical, and food processing manufacturers access to efficient thermal transfer systems for heating, cooling, and energy recovery from VICARB, Doyle and Roth, Atlas Industrial, Graham, Pfaudler, and other OEM manufacturers. Buying used can save up to 50% of capital and 90% of lead time versus buying new. ▶

IPP stocks shell and tube heat exchangers in stainless steel 316, 304, 316L, and 321, carbon steel, graphite, titanium, tantalum, Hastelloy C-276, Inconel, glass-lined, and duplex construction. Heat transfer surface areas range from 0.37 m² (4 ft²) to 1,050 m² (11,300 ft²). Shell and tube pressures range up to 179.3 bar (2,600 psi). Operating temperatures range up to 662 °C (1,224 °F).

Orientations include horizontal, vertical, and inclined configurations. Condition options include good used, unused surplus, refurbished/rebuilt, and new. Heat exchangers feature ASME, TEMA-rated designs and others for compliance and reliability. Buying used heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

46+

Years of Experience

30+

Material Options

1980

Kuruluşundan bu yana

15

Ofisleri bulunan ülkeler

Paslanmaz çelik

SS 316, 304, 316L, 321 & more

Karbon Çelik

Up to 1,050 m² & 179.3 bar

Specialty Alloys

Titanium, Graphite, Hastelloy & more

Kullanılmış Reaktörleri Türüne Göre İnceleyin

IPP, iki farklı reaktör alt tipini stoklarında bulundurmaktadır: tam karıştırma özelliğine sahip parti tipi karıştırmalı sistemler ve sadece gövdeden oluşan parti tipi reaktörler. Proses gereksinimlerinize uygun alt tipi seçin.

Parti Tipi Karıştırmalı Reaktörler

Reaktör sistemleri, tank, ceket, karıştırma tahrik sistemi, pervane, şaft contası ve bölme levhaları dahil olmak üzere komple olarak sunulmaktadır. Pfaudler, DeDietrich, Gale Process Solutions, UGE ve 150'den fazla üreticiden temin edilebilir. Cam kaplı, paslanmaz çelik, Hastelloy ve titanyum konstrüksiyon seçenekleri mevcuttur. Kapasiteler 2 L ile 80.000 L (0,5 ile 21.150 galon) arasında değişmektedir.

Parti Tipi Sadece Gövde Reaktörleri

Reaktör gövdeleri (kap, ceket, başlık ve nozullar dahil) - karıştırma bileşenleri olmadan satılır. Başlıca üreticiler olan Pfaudler, DeDietrich ve UGE'den temin edilebilir. Ağırlıklı olarak cam kaplı yapıdadır. Yeniden cam kaplanmış, kullanılmış, yeni ve kullanılmamış durumda mevcuttur.

Buy Used Heat Exchangers by Material

IPP stocks shell and tube heat exchangers in stainless steel, carbon steel, graphite, titanium, tantalum, Hastelloy, and other specialty alloys. Choose the material that matches your process chemistry and corrosion requirements.

Buy Used Stainless Steel Heat Exchangers for Sale

IPP stocks stainless steel shell and tube heat exchangers across multiple grades including SS 316, SS 304, SS Austenitic, SS 316L, and SS 321. Stainless steel provides sanitary and corrosion-resistant performance for chemical, pharmaceutical, and food processing applications.

Daekyung SS 316 — 790 m²

Unused Daekyung Machinery stainless steel 316 clad shell and tube heat exchanger. 790 m² (8,500 ft²) surface area with vacuum capability and 8-pass tube-side design.

Isı Transfer Yüzey Alanı:790 m² (8,500 ft²) surface area

Shell Pressure:Paslanmaz Çelik 316

Tüp Basıncı:1,398

Shell Temperature:29.3 bar (425 psi)

Tüp Sıcaklığı:29.3 bar (425 psi)

Tube Number:1,398 tubes

Tube-side Passes:8-pass design

Yönlendirme:Yatay

Vakum:vakumlanabilir

Cust-O-Fab SS 316 — 556 m²

Used Cust-O-Fab stainless steel 316 shell and tube heat exchanger. 556 m² (6,000 ft²) surface area with 1,248 tubes.

Isı Transfer Yüzey Alanı:556 m² (6,000 ft²) surface area

Tüp Basıncı:Paslanmaz Çelik 316

Shell Temperature:Up to 232.2 °C (450 °F)

Tube Number:1,248 tubes, SS 316 tubesheet

Yönlendirme:Yatay yönlendirme

Harris Thermal SS 304 — 876 m²

Used Harris Thermal stainless steel 304 shell and tube heat exchanger. 876 m² (9,400 ft²) surface area — the largest SS 304 unit in IPP inventory.

Isı Transfer Yüzey Alanı:876 m² (9,400 ft²) surface area

Malzeme:Stainless Steel 304 construction

Üretici:Manufacturer: Harris Thermal

Durum:İyi kullanılmış durumda.

Alt tür:Shell and tube design

Buy Used Carbon Steel Heat Exchangers for Sale

IPP stocks carbon steel shell and tube heat exchangers in both primary construction and shell-only configurations. Carbon steel is also the most common shell material across the inventory. Carbon steel construction serves general utility and industrial applications.

Heatran CS — 1,050 m²

Used Heatran carbon steel shell and tube heat exchanger. 1,050 m² (11,300 ft²) surface area — the largest heat exchanger in IPP inventory. Rated to 179.3 bar (2,600 psi).

Isı Transfer Yüzey Alanı:1,050 m² (11,300 ft²) surface area

Shell Pressure:179.3 bar (2,600 psi)

Tüp Basıncı:179.3 bar (2,600 psi)

Shell Temperature:Up to 315.6 °C (600 °F)

Tube Number:1,850 tubes

Shell Diameter:1,050 mm (41 in) shell

Yönlendirme:Horizontal, single-pass

Delta Tee CS — 1,050 m²

Unused Delta Tee International carbon steel shell and tube heat exchanger. 1,050 m² (11,250 ft²) surface area rated to 99.3 bar (1,450 psi) shell side.

Isı Transfer Yüzey Alanı:1,050 m² (11,250 ft²) surface area

Shell Pressure:99.3 bar (1,450 psi) shell side

Tüp Basıncı:27.6 bar (400 psi) tube side

Tube Number:15,7 mm (0,62 inç)

Tube Type:27.6 bar (400 psi)

Durum:Unused surplus condition

Johnson Hunt BEU CS — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger. 6.4 m² (69 ft²) compact unit rated to 9 bar (131 psi) and 200 °C (392 °F).

Isı Transfer Yüzey Alanı:6.4 m² (69 ft²) surface area

Shell Pressure:9 bar (131 psi)

Tüp Basıncı:9 bar (131 psi)

Shell Temperature:Up to 200 °C (392 °F)

Tube-side Passes:2-pass tube

Shell-side Passes:1-pass shell

Durum:Kullanılmamış

Model:BEU model

Buy Used Specialty Alloy Heat Exchangers for Sale

IPP stocks specialty alloy shell and tube heat exchangers in graphite, titanium, tantalum, Hastelloy, Inconel, glass-lined, and duplex construction. These materials serve high-temperature or highly corrosive conditions where stainless and carbon steel are insufficient.

Industrial Alloy Titanium — 530 m²

Used Industrial Alloy Fabricators titanium clad shell and tube heat exchanger. 530 m² (5,700 ft²) surface area with titanium tubes and SS 316 shell.

Isı Transfer Yüzey Alanı:530 m² (5,700 ft²) surface area

Shell Pressure:1.03 bar shell

Tüp Basıncı:1.72 bar tube

Boru Malzemesi:Titanium tubes

Shell Material:SS 316 shell

Tube Number:1,450

Tube Type:Straight Tube

Shell Diameter:1,650 mm (64.5 in) shell diameter

Metaullics Graphite — 454.4 m²

Used Metaullics Systems graphite (Impervite) shell and tube heat exchanger. 454.4 m² (4,900 ft²) with 721 graphite tubes and carbon steel shell.

Isı Transfer Yüzey Alanı:454.4 m² (4,900 ft²) surface area

Shell Pressure:6 bar shell

Tüp Basıncı:7 bar tube

Tube Number:6.400 mm (252 inç)

Boru Malzemesi:31.8 mm (1.25 in)

Shell Material:Carbon steel shell

Yönlendirme:Yatay

Model:Impervite model

NL Schkopau Hastelloy — 364 m²

Used NL Schkopau IRB GmbH Hastelloy shell and tube heat exchanger. 364 m² (3,900 ft²) surface area with Hastelloy tubes, tubesheet, and heads. Vacuum capable.

Isı Transfer Yüzey Alanı:364 m² (3,900 ft²) surface area

Shell Pressure:7 bar shell

Tüp Basıncı:5 bar tube

Shell Temperature:Up to 260 °C (500 °F)

Tube Number:1,014

Tube Type:Straight Tube

Vakum:Vakum özellikli

Buy Used Heat Exchangers for Sale by Manufacturer

IPP stocks shell and tube heat exchangers from a wide range of manufacturers, with VICARB and Doyle and Roth representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, replacement parts, and operator familiarity.

Buy Used VICARB Heat Exchangers for Sale

VICARB is the deepest single-manufacturer position in IPP’s shell and tube heat exchanger inventory. Available model families include FTA 20 and FTA20/24/26 series graphite units in used condition.

VICARB FTA 20 Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) surface area, carbon steel shell, and graphite tubes.

Malzeme:Graphite construction

Isı Transfer Yüzey Alanı:6.4 m² (68.9 ft²) surface area

Shell Pressure:4 bar (58 psi) shell & tube

Shell Material:Carbon steel shell

Durum:Kullanılmış durumda

VICARB FTA20/24/26 Graphite — 12.1 m²

Used VICARB FTA20/24/26 graphite shell and tube heat exchanger with 12.1 m² (130 ft²) surface area, 300 mm (11.8 in) shell diameter, and carbon steel shell.

Malzeme:Graphite construction

Isı Transfer Yüzey Alanı:12.1 m² (130 ft²) surface area

Shell Pressure:6 bar (87 psi) shell & tube

Shell Diameter:300 mm (11.8 in) shell diameter

Durum:Kullanılmış durumda

VICARB Graphite — 23.3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) surface area, carbon steel shell, and graphite tubes rated to 6 bar (87 psi).

Malzeme:Graphite construction

Isı Transfer Yüzey Alanı:23.3 m² (250.8 ft²) surface area

Shell Pressure:6 bar (87 psi) shell & tube

Shell Material:Carbon steel shell

Durum:Kullanılmış durumda

Buy Used Doyle and Roth Heat Exchangers for Sale

Doyle and Roth is the second deepest OEM position in IPP’s shell and tube heat exchanger inventory. Available units span stainless steel 304, Inconel, and other materials across used conditions.

Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) surface area, U-tube design, rated to 165.6 °C (330 °F) shell side.

Malzeme:Paslanmaz Çelik 304

Isı Transfer Yüzey Alanı:10.4 m² (112 ft²) surface area

Shell Pressure:3.4 bar (50 psi) shell side

Tüp Basıncı:10.3 bar (150 psi) tube side

Tube Type:U-tube, used condition

Doyle and Roth Inconel — 8.6 m²

Used Doyle and Roth Inconel shell and tube heat exchanger with 8.6 m² (93 ft²) surface area, 66 straight tubes, vacuum capable, rated to 260 °C (500 °F).

Malzeme:Inconel construction

Isı Transfer Yüzey Alanı:8.6 m² (93 ft²) surface area

Shell Pressure:10.3 bar (150 psi) shell & tube

Vakum:Vakum özellikli

Durum:Kullanılmış durumda

Doyle and Roth SS 304 — 68.1 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 68.1 m² (733 ft²) surface area, 282 U-tubes, rated to 10.3 bar (150 psi).

Malzeme:Paslanmaz Çelik 304

Isı Transfer Yüzey Alanı:68.1 m² (733 ft²) surface area

Shell Pressure:10.3 bar (150 psi) shell & tube

Tube Number:282 U-tubes

Durum:Kullanılmış durumda

Buy Used Heat Exchangers from Other Manufacturers

Beyond VICARB and Doyle and Roth, IPP stocks shell and tube heat exchangers from Atlas Industrial, Delta Tee International, Graham, Meccanica Sardia, Pfaudler, Johnson Hunt, Manning & Lewis, and DeDietrich. These units span carbon steel, stainless steel, Hastelloy, and other materials.

Atlas Industrial CS — 28.5 m²

Unused Atlas Industrial carbon steel shell and tube heat exchanger with 28.5 m² (307 ft²) surface area, 135 straight tubes, vacuum capable, rated to 662 °C (1,200 °F).

Malzeme:Carbon Steel construction

Isı Transfer Yüzey Alanı:28.5 m² (307 ft²) surface area

Shell Pressure:10.3 bar (150 psi) shell & tube

Shell Temperature:Up to 662 °C (1,200 °F)

Durum:Kullanılmamış durumda

Atlas Industrial Hastelloy BEM — 27.9 m²

Used Atlas Industrial BEM 20-60 Hastelloy clad shell and tube heat exchanger with 27.9 m² (300 ft²) surface area, 324 straight tubes, vacuum capable.

Malzeme:Hastelloy construction (clad)

Isı Transfer Yüzey Alanı:27.9 m² (300 ft²) surface area

Shell Pressure:10.3 bar (150 psi) shell & tube

Vakum:Vakum özellikli

Durum:Kullanılmış durumda

Heatran Carbon Steel — 1,050 m²

Used Heatran carbon steel shell and tube heat exchanger — the largest in IPP inventory at 1,050 m² (11,300 ft²), rated to 179.3 bar (2,600 psi).

Malzeme:Carbon Steel construction

Isı Transfer Yüzey Alanı:1,050 m² (11,300 ft²) surface area

Shell Pressure:179.3 bar (2,600 psi) shell & tube

Shell Temperature:Up to 315.6 °C (600 °F)

Durum:Kullanılmış durumda

Buy Used Heat Exchangers for Sale by Condition

IPP stocks shell and tube heat exchangers in used, unused, refurbished/rebuilt, and new condition grades. Choose the condition that matches your budget, timeline, and performance requirements.

İkinci el ısı eşanjörleri satın alın

Good used heat exchangers are the deepest condition position in IPP’s inventory. These units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining OEM shell, tube, and head hardware.

Used Heatran CS — 1,050 m²

Used Heatran carbon steel shell and tube heat exchanger. 1,050 m² (11,300 ft²) surface area rated to 179.3 bar (2,600 psi) with 1,850 tubes.

Durum:Kullanılmış durumda

Malzeme:Carbon Steel construction

Isı Transfer Yüzey Alanı:1,050 m² (11,300 ft²) surface area

Shell Pressure:179.3 bar (2,600 psi) shell & tube

Tube Number:1,850 tubes, horizontal

Used Harris Thermal SS 304 — 876 m²

Used Harris Thermal stainless steel 304 shell and tube heat exchanger. 876 m² (9,400 ft²) surface area with 2,451 tubes, vacuum capable.

Durum:Kullanılmış durumda

Malzeme:Paslanmaz Çelik 304

Isı Transfer Yüzey Alanı:876 m² (9,400 ft²) surface area

Tube Number:2,451 tubes, 4-pass design

Vakum:Vakum özellikli

Used VICARB Graphite — 23.3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) surface area, graphite tubes, carbon steel shell, rated to 6 bar (87 psi).

Durum:Kullanılmış durumda

Malzeme:Graphite construction

Isı Transfer Yüzey Alanı:23.3 m² (250.8 ft²) surface area

Shell Pressure:6 bar (87 psi) shell & tube

Shell Material:Carbon steel shell

Buy Unused Heat Exchangers for Sale

Unused surplus heat exchangers were manufactured but never installed in production service. These units offer new-equipment performance with immediate availability and significant savings versus ordering new from the OEM.

Unused Johnson Hunt BEU CS — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger. 6.4 m² (69 ft²) surface area rated to 9 bar (131 psi) and 200 °C (392 °F).

Durum:Kullanılmamış durumda

Malzeme:Carbon Steel construction

Isı Transfer Yüzey Alanı:6.4 m² (69 ft²) surface area

Shell Pressure:9 bar (131 psi) shell & tube

Model:BEU model, 2-pass tube

Unused Atlas Industrial CS — 28.5 m²

Unused Atlas Industrial carbon steel shell and tube heat exchanger. 28.5 m² (307 ft²) surface area, 135 straight tubes, vacuum capable, rated to 662 °C (1,200 °F).

Durum:Kullanılmamış durumda

Malzeme:Carbon Steel construction

Isı Transfer Yüzey Alanı:28.5 m² (307 ft²) surface area

Shell Temperature:Up to 662 °C (1,200 °F)

Vakum:Vakum özellikli

Unused Delta Tee CS — 1,050 m²

Unused Delta Tee International carbon steel shell and tube heat exchanger. 1,050 m² (11,250 ft²) surface area rated to 99.3 bar (1,450 psi) shell side.

Durum:Kullanılmamış durumda

Malzeme:Carbon Steel construction

Isı Transfer Yüzey Alanı:1,050 m² (11,250 ft²) surface area

Shell Pressure:99.3 bar (1,450 psi) shell side

Tube Number:1,815 straight tubes

Buy Refurbished/Rebuilt Heat Exchangers for Sale

IPP stocks refurbished and rebuilt shell and tube heat exchangers. These units have been restored to operational readiness, offering a balance between cost savings and performance assurance.

Manning & Lewis SS 316 — 65.6 m²

Refurbished/rebuilt Manning & Lewis stainless steel 316 shell and tube heat exchanger. 65.6 m² (706 ft²) surface area, 444 straight tubes, vacuum capable.

Durum:Yenilenmiş/Yeniden inşa edilmiş durumda

Malzeme:Paslanmaz Çelik 316

Isı Transfer Yüzey Alanı:65.6 m² (706 ft²) surface area

Shell Pressure:10.3 bar (150 psi) shell & tube

Vakum:Vakum özellikli

Allegheny Bradford SS 316L — 1.02 m²

Refurbished/rebuilt Allegheny Bradford Corp. stainless steel 316L shell and tube heat exchanger. 1.02 m² (11 ft²) compact unit with 34 U-tubes.

Durum:Yenilenmiş/Yeniden inşa edilmiş durumda

Malzeme:316L Paslanmaz Çelik

Isı Transfer Yüzey Alanı:1.02 m² (11 ft²) surface area

Shell Pressure:10.3 bar (150 psi) shell & tube

Tube Type:34 U-tubes, 2-pass

Le-Carbone Lorraine Graphite — 2 m²

Refurbished/rebuilt Le-Carbone Lorraine GM/8 graphite shell and tube heat exchanger. 2 m² (21.5 ft²) surface area with carbon steel shell, rated to 9 bar (130 psi).

Durum:Yenilenmiş/Yeniden inşa edilmiş durumda

Malzeme:Graphite construction

Isı Transfer Yüzey Alanı:2 m² (21.5 ft²) surface area

Shell Pressure:9 bar (130 psi) shell & tube

Shell Material:Carbon steel shell

Buy New Heat Exchangers for Sale

IPP stocks new shell and tube heat exchangers for immediate delivery. IPP’s GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery. New

Timmerman SS 316L — 197.4 m²

New Timmerman stainless steel 316L shell and tube heat exchanger. 197.4 m² (2,100 ft²) surface area, 499 tubes, vertical orientation, rated to 16 bar (232 psi) tube side.

Durum:Yeni durumda

Malzeme:316L Paslanmaz Çelik

Isı Transfer Yüzey Alanı:197.4 m² (2,100 ft²) surface area

Tüp Basıncı:16 bar (232 psi) tube side

Tube Number:499 tubes, vertical

Perry Products AEU SS 304 — 105.1 m²

New Perry Products Co. AEU stainless steel 304 shell and tube heat exchanger. 105.1 m² (1,150 ft²) surface area, 197 U-tubes, rated to 75.6 bar (1,100 psi) tube side.

Durum:Yeni durumda

Malzeme:Paslanmaz Çelik 304

Isı Transfer Yüzey Alanı:105.1 m² (1,150 ft²) surface area

Tüp Basıncı:75.6 bar (1,100 psi) tube side

TEMA Type:TEMA AEU, 197 U-tubes

Need a Heat Exchanger? Ask an IPP Expert.

Tell us your surface area, material, pressure, and temperature requirements. Our team will match your specifications against current inventory and provide a detailed quote.

Heat Exchanger Material Comparison

Choosing the right material of construction depends on your process chemistry, operating temperature, pressure, and budget. Here is how the most common heat exchanger materials compare.

Faktör	Paslanmaz çelik	Karbon Çelik	Specialty Alloys
Envanter Derinliği	En derin konum	Moderate position	Wide selection
Maximum Surface Area	876 m² (9,400 ft²)	1,050 m² (11,300 ft²)	530 m² (5,700 ft²)
Common Applications	Sanitary, corrosion-resistant processes	General utility, industrial	High-temp, highly corrosive
Corrosion Resistance	Good — broad chemical compatibility	Limited — best for non-corrosive fluids	Excellent — acids, chlorides, extreme pH
Typical Industries	Pharma, food, chemical	HVAC, utilities, petrochemical	Specialty chemical, mining, refining
Relative Cost	Mid-range	Lowest cost	Premium pricing
Max Pressure in IPP Stock	29.3 bar (425 psi)	179.3 bar (2,600 psi)	12.1 bar (175 psi)

Advantages of Buying Used Heat Exchangers from IPP

International Process Plants, 46 yılı aşkın proses ekipmanı uzmanlığını, 15 ülkede yaklaşık 150 çalışanını ve 15.000 proses sistemi ve ana ekipman parçasından oluşan envanterini bir araya getirerek, prosesinize hazır reaktörler sunmaktadır.

Önemli Maliyet Tasarrufu

Buying used heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. With shell and tube heat exchangers from multiple manufacturers in stock, IPP offers a wide selection to match your budget and specifications.

Hemen Kullanılabilirlik

In-stock heat exchangers from IPP are ready to ship. New OEM heat exchangers require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

30+ Material Options

IPP stocks heat exchangers in 30+ distinct materials of construction including stainless steel 316, 304, 316L, and 321, carbon steel, graphite, titanium, tantalum, Hastelloy C-276, Inconel, glass-lined, duplex, Monel, and copper/brass.

Surface Areas to 1,050 m²

Heat transfer surface areas range from 0.37 m² (4 ft²) for compact pilot-scale exchangers up to 1,050 m² (11,300 ft²) for large-scale industrial applications. Surface area data is available on nearly every unit in inventory.

15 Ülkede Küresel Varlık

IPP'nin 15 ülkede ofisi bulunmaktadır: Brezilya, Kanada, Çin, Çek Cumhuriyeti, Fransa, Almanya, Hindistan, İtalya, Meksika, Pakistan, Portekiz, Romanya, Türkiye, Birleşik Krallık ve Amerika Birleşik Devletleri. IPP, dünya çapında 160.000'den fazla müşteriye hizmet vermiştir.

High-Pressure & High-Temperature Ratings

Shell and tube pressures range up to 179.3 bar (2,600 psi). Operating temperatures range up to 662 °C (1,224 °F). Vacuum-capable units are available across the inventory.

How Buying a Used Heat Exchanger Works

The process of purchasing a used heat exchanger from IPP follows five steps, from specification to delivery.

1

Gerekli Belgeleri Gönderin

Share your heat exchanger specifications: surface area, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.

2

Veri Paketini Al

IPP sends a detailed equipment data sheet with surface area, pressure ratings, temperature ratings, tube count, shell diameter, nozzle schedule, and condition report with photographs.

3

Ekipmanı inceleyin.

Contact IPP to arrange an on-site visit or request a live video walkthrough of the heat exchanger with an IPP team member at one of our global locations.

4

Yenileme Seçenekleri

IPP offers refurbished and rebuilt heat exchangers. Contact IPP for details on retubing, rebundling, and other refurbishment services for shell and tube heat exchangers.

5

Paketleme ve Teslimat

IPP, paketleme, sandıklama, nakliye ve tesis sahanıza teslimatı koordine eder. 15 ülkede bulunan ofislerden dünya çapında gönderim yapılmaktadır. Gönderim detayları için IPP ile iletişime geçin.

Browse Heat Exchanger Types

IPP stocks heat exchangers across multiple designs including shell and tube, plate, spiral, air-cooled, and specialty configurations. Browse the shell and tube inventory below.

Kabuk ve Borulu Isı Eşanjörleri

Kullanılmış Reaktör Satın Alan Sektörler

IPP, dünya çapında çeşitli proses endüstrilerindeki üreticilere kullanılmış reaktörler tedarik etmektedir.

Kimyasal Üretim

İlaç

Yiyecek ve İçecek

Oil, Gas & Petrochemical

HVAC & Utilities

İnce Kimyasallar

Güç Üretimi

Water Treatment

Polimerler ve Reçineler

Tarım kimyasalları

Frequently Asked Questions About Buying Used Heat Exchangers

Answers to the most common questions from procurement teams evaluating used shell and tube heat exchangers.

How many heat exchangers does IPP have in stock?

IPP stocks a large inventory of shell and tube heat exchangers. Manufacturers include VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, Graham, Meccanica Sardia, Pfaudler, and many others. Surface areas range from 0.37 m² (4 ft²) to 1,050 m² (11,300 ft²). Mevcut stok durumu için IMS envanterine göz atın.

What condition grades are available?

IPP stocks heat exchangers in multiple conditions: good used, unused surplus, refurbished/rebuilt, and new. Unused heat exchangers were manufactured but never installed, offering new-equipment performance with immediate availability. Browse the current inventory for available condition options.

What manufacturers of heat exchangers does IPP stock?

IPP stocks shell and tube heat exchangers from a wide range of manufacturers including VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, Graham, Meccanica Sardia, Pfaudler, Johnson Hunt, Manning & Lewis, DeDietrich, ITT Standard, and many others. Mevcut üreticileri görmek için güncel envantere göz atın.

What orientations are available?

IPP stocks heat exchangers in three orientations: horizontal, vertical, and inclined. Contact IPP with your installation requirements and our team will identify matching units.

Does IPP sell new heat exchangers as well as used?

Evet. IPP stocks new heat exchangers in addition to used and unused surplus units. IPP's GPS subsidiary provides custom fabricated equipment with 12–16 week average delivery. Contact IPP for details on new heat exchanger availability.

What surface area range is available?

IPP stocks shell and tube heat exchangers with surface areas from 0.37 m² (4 ft²) up to 1,050 m² (11,300 ft²). The largest unit in stock is a Heatran carbon steel exchanger at 1,050 m² (11,300 ft²). Contact IPP with your surface area requirements.

Hangi basınç değerleri mevcuttur?

Shell and tube pressure ratings range up to 179.3 bar (2,600 psi) across the heat exchanger inventory. The highest-pressure unit is the Heatran carbon steel at 179.3 bar (2,600 psi) on both shell and tube sides. Contact IPP with your process pressure requirements.

What temperature ratings are available?

Operating temperatures range up to 662 °C (1,224 °F) across the heat exchanger inventory. Temperature ratings vary by material of construction and design. Contact IPP with your operating temperature requirements and our team will identify matching units.

Are vacuum-rated heat exchangers available?

Yes. IPP stocks vacuum-capable shell and tube heat exchangers across multiple materials of construction. Vacuum-rated units are available in stainless steel, carbon steel, graphite, titanium, tantalum, and Hastelloy construction. Contact IPP with your vacuum requirements.

What tube configurations are available?

IPP stocks heat exchangers with tube-side passes from 1 to 8, tube counts from 18 to 1,850, and both straight tube and U-tube configurations. Tube diameters range from 12.7 mm (0.5 in) to 38.1 mm (1.5 in). Contact IPP for specific tube configurations.

What stainless steel grades are available?

IPP stocks stainless steel heat exchangers across multiple grades: SS 316, SS 304, SS Austenitic, SS 316L, SS 321, and other grades including SS 304L, SS 904L, SS 317, and SS 310L. Stainless steel is the most common material category in the inventory. Browse the inventory to see current availability.

Does IPP stock graphite heat exchangers?

Yes. IPP stocks graphite shell and tube heat exchangers — graphite is the second most common material in the inventory. Graphite shell and tube exchangers feature graphite tubes and heads with carbon steel shells. Browse the inventory for current graphite heat exchanger availability.

Does IPP stock titanium heat exchangers?

Yes. IPP stocks titanium shell and tube heat exchangers. The largest titanium unit is a 530 m² (5,700 ft²) Industrial Alloy Fabricators exchanger with titanium tubes and SS 316 shell. Contact IPP for current titanium heat exchanger availability.

Does IPP stock tantalum heat exchangers?

Yes. IPP stocks tantalum shell and tube heat exchangers. Available units include an unused Tantec tantalum exchanger with 31 m² (333.7 ft²) surface area, vacuum capable, rated to 8 bar (116 psi) shell side and 200 °C (392 °F). Contact IPP for current tantalum availability.

Does IPP stock Hastelloy heat exchangers?

Yes. IPP stocks Hastelloy shell and tube heat exchangers across Hastelloy C-276, Hastelloy C-22, Hastelloy B, and other Hastelloy grades. The largest Hastelloy unit is a 364 m² (3,900 ft²) NL Schkopau IRB exchanger rated to 260 °C (500 °F). Contact IPP for current Hastelloy availability.

How much can I save buying a used heat exchanger versus new?

Buying used heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on material of construction, surface area, pressure rating, and condition. IPP provides detailed quotes with full specification matching on request. Contact IPP for pricing on specific units.

How long does it take to receive a used heat exchanger from IPP?

In-stock heat exchangers are ready to ship. Heat exchangers requiring refurbishment ship on a timeline that depends on scope. IPP'nin GPS yan kuruluşu, ortalama 12-16 haftalık teslimat süresiyle yeni, özel olarak üretilmiş ekipmanlar sağlamaktadır. İlgilendiğiniz ürünlerin teslimat süreleri hakkında bilgi almak için IPP ile iletişime geçin. IPP, dünya genelinde 15 ülkedeki ofislerinden gönderim yapmaktadır.

Can I visit IPP to inspect a heat exchanger before buying?

Ziyaret ayarlamak veya belirli ekipmanlar için inceleme seçeneklerini görüşmek üzere IPP ile iletişime geçin. IPP'nin 15 ülkede ofisi bulunmaktadır: Brezilya, Kanada, Çin, Çek Cumhuriyeti, Fransa, Almanya, Hindistan, İtalya, Meksika, Pakistan, Portekiz, Romanya, Türkiye, Birleşik Krallık ve Amerika Birleşik Devletleri.

Does IPP handle shipping and freight for heat exchangers?

IPP, paketleme, sandıklama, nakliye ve tesis sahanıza teslimat işlemlerini koordine eder. 15 ülkede ofisleri bulunmaktadır. Ve Dünya çapında 160.000'den fazla müşteriye hizmet verildi., IPP, küresel ekipman lojistiği konusunda geniş deneyime sahiptir. Belirli ekipmanların nakliyesi ve lojistiği hakkında görüşmek için IPP ile iletişime geçin.

What is the difference between shell and tube and plate heat exchangers?

Shell and tube heat exchangers have an external cylinder (shell) with internal tubes — one fluid flows through the tubes while the other flows around them. They handle high pressures and are rugged. Plate heat exchangers consist of a series of alloy plates held together by a frame, offering better heat transfer efficiency and easier cleaning. IPP stocks both shell and tube and plate heat exchangers. Contact IPP to discuss which design suits your application.

Looking for New Heat Exchangers?

IPP Group supplies new heat exchangers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. If you cannot find what you need in our used inventory, we can build to your specifications.

Ready to Buy a Heat Exchanger?

IPP, 1980'den beri dünya çapında 160.000'den fazla müşteriye kaliteli proses ekipmanı tedarik etmektedir. İhtiyaçlarınızı bize bildirin; ekibimiz size uygun stok ve fiyatlarla yanıt verecektir.

Faktör

Paslanmaz çelik

Karbon Çelik

Specialty Alloys

Envanter Derinliği

En derin konum

Moderate position

Wide selection

Maximum Surface Area

876 m² (9,400 ft²)

1,050 m² (11,300 ft²)

530 m² (5,700 ft²)

Common Applications

Sanitary, corrosion-resistant processes

General utility, industrial

High-temp, highly corrosive

Corrosion Resistance

Good — broad chemical compatibility

Limited — best for non-corrosive fluids

Excellent — acids, chlorides, extreme pH

Typical Industries

Pharma, food, chemical

HVAC, utilities, petrochemical

Specialty chemical, mining, refining

Relative Cost

Mid-range

Lowest cost

Premium pricing

Max Pressure in IPP Stock

29.3 bar (425 psi)

179.3 bar (2,600 psi)

12.1 bar (175 psi)