Buy Used Holoflite & Screw Dryers for Sale

Buying used holoflite and screw dryers through International Process Plants gives chemical processing, wastewater treatment, mining, and pharmaceutical buyers access to indirect-heat dryers that use screws to convey and thermally process bulk solids in a single enclosed trough from Joy Denver, Svedala, Hi Line Industries, Reitz, Denver Equipment, Thies Kg Coesfeld Gmbh, and other OEM manufacturers. ▶

Materials of construction include Carbon Steel, Stainless Steel 316, Stainless Steel 304, and Stainless Steel 316L. Internal pressure ratings range from 0.005 bar (0.07 psi) on IPP# 208223 to 5.5 bar (80 psi) on IPP# 222018. Heat transfer surface areas span from 7.2 m² (78 ft²) on IPP# 91126 to 141.1 m² (1,500 ft²) on IPP# 232604. Screw configurations range from single-screw units through twin-screw and quad-screw designs.

IPP stocks Joy Denver units in the D-2420-6 and D12-20-5 model families. Svedala inventory includes the Q2424-6 quad-screw processor series. All units are in used condition. Buying used holoflite and screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

10+

Holoflite & Screw Dryers in Stock

1980

Основано с

15

Страны, имеющие офисы

Joy Denver D-2420-6 Carbon Steel

Used — 53 m² heat transfer area

Denver Equipment Stainless Steel 316L

Used — 19 m² heat transfer area

Svedala Q2424-6 Carbon Steel

Used — 141.1 m² heat transfer area

Buy Used Holoflite & Screw Dryers by Material

IPP stocks holoflite and screw dryers in carbon steel and multiple stainless steel grades. The material of construction determines corrosion resistance, maximum operating temperature, and compatibility with the product being dried.

Buy Used Carbon Steel Holoflite & Screw Dryers for Sale

Carbon steel is the deepest material position in IPP’s holoflite and screw dryer inventory. Available from Joy Denver and Svedala, these units suit general industrial drying where elevated corrosion resistance is not required.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Материал:Углеродистая сталь

Heat Transfer Surface Area:53 m² (571 ft²) heat transfer area

Внутреннее давление:5.5 bar (80 psi)

Внутренняя температура:343,3 °C (650 °F)

Количество винтов:Four-screw configuration

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and hot-oil heating medium.

Материал:Углеродистая сталь

Heat Transfer Surface Area:141.1 m² (1,500 ft²) heat transfer area

Внутреннее давление:2.1 bar (30 psi)

Внутренняя температура:343,3 °C (650 °F)

Количество винтов:Four-screw configuration

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area.

Heat Transfer Surface Area:11.9 m² (128 ft²) heat transfer area

Давление в рубашке:2.1 bar (30 psi)

Температура рубашки:343,3 °C (650 °F)

Количество винтов:Single-screw configuration

Состояние:Б/у состояние

Buy Used Stainless Steel Holoflite & Screw Dryers for Sale

IPP stocks stainless steel holoflite and screw dryers in 316, 304, and 316L grades. Available from Denver Equipment, Thies Kg Coesfeld Gmbh, Hi Line Industries, and Reitz for corrosion-sensitive or sanitary drying applications.

Denver Equipment D-12-18-5 — 19 m²

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Материал:Нержавеющая сталь 316L

Heat Transfer Surface Area:19 m² (204 ft²) heat transfer area

Внутреннее давление:2.1 bar (30 psi)

Внутренняя температура:343,3 °C (650 °F)

Количество винтов:Twin-screw configuration

Product Rate:907 kg/h (2,000 lb/h) product rate

Thies Kg Coesfeld Gmbh 2 V 410-24 — SS 316

Used Thies Kg Coesfeld Gmbh 2 V 410-24 stainless steel 316 holoflite and screw dryer with twin-screw design rated for 50 °C (122 °F) internal temperature.

Материал:Нержавеющая сталь 316

Внутренняя температура:50 °C (122 °F) internal temperature

Давление в рубашке:Давление в рубашке охлаждения: 6 бар (87 фунтов на квадратный дюйм).

Количество винтов:Twin-screw configuration

Width:700 mm (27.6 in) W

Длина:3,750 mm (147.6 in) L

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Материал:Нержавеющая сталь 304

Длина:3,050 mm (120 in) length

Давление в рубашке:0.34 bar (5 psi) jacket pressure

Количество винтов:Single-screw configuration

Состояние:Б/у состояние

Buy Used Holoflite & Screw Dryers for Sale by Manufacturer

IPP stocks holoflite and screw dryers from six OEM manufacturers, with Joy Denver and Svedala representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Joy Denver Holoflite & Screw Dryers for Sale

Joy Denver is the deepest single-manufacturer position in IPP’s holoflite and screw dryer inventory. Available models include the D-2420-6 quad-screw processor and the D12-20-5 single-screw unit, all in carbon steel construction.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area, rated for 5.5 bar (80 psi) at 343.3 °C (650 °F).

Материал:Углеродистая сталь

Heat Transfer Surface Area:53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Количество винтов:Four-screw configuration

Состояние:Б/у состояние

Joy Denver D-2420-6 — IPP# 222019

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Материал:Углеродистая сталь

Heat Transfer Surface Area:53 m² (571 ft²) heat transfer area

Внутреннее давление:5.5 bar (80 psi)

Внутренняя температура:343,3 °C (650 °F)

Количество винтов:Four-screw configuration

Состояние:Б/у состояние

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area and 2.1 bar (30 psi) jacket pressure.

Heat Transfer Surface Area:11.9 m² (128 ft²) heat transfer area

Давление в рубашке:2.1 bar (30 psi)

Температура рубашки:343,3 °C (650 °F)

Количество винтов:Single-screw configuration

Длина:6,100 mm (240 in) length

Состояние:Б/у состояние

Buy Used Svedala Holoflite & Screw Dryers for Sale

Svedala is the second deepest OEM position in IPP’s holoflite and screw dryer inventory. Available units include the Q2424-6 quad-screw processor series in carbon steel construction with hot-oil heating medium.

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Материал:Углеродистая сталь

Heat Transfer Surface Area:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Количество винтов:Four-screw configuration

Состояние:Б/у состояние

Svedala Q2424-6 — IPP# 232605

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Материал:Углеродистая сталь

Heat Transfer Surface Area:141.1 m² (1,500 ft²) heat transfer area

Внутреннее давление:2.1 bar (30 psi)

Внутренняя температура:343,3 °C (650 °F)

Количество винтов:Four-screw configuration

Состояние:Б/у состояние

Svedala — 141.1 m² IPP# 232603

Used Svedala carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Материал:Углеродистая сталь

Heat Transfer Surface Area:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Количество винтов:Four-screw configuration

Состояние:Б/у состояние

Buy Used Holoflite & Screw Dryers from Other Manufacturers

Beyond Joy Denver and Svedala, IPP stocks holoflite and screw dryers from Hi Line Industries, Reitz, Denver Equipment, and Thies Kg Coesfeld Gmbh. These units span stainless steel grades for corrosion-sensitive and sanitary drying duties.

Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Материал:Нержавеющая сталь 316L

Heat Transfer Surface Area:19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Количество винтов:Twin-screw configuration

Состояние:Б/у состояние

Hi Line Industries 2155M25 — SS 316

Used Hi Line Industries 2155M25 stainless steel 316 holoflite and screw dryer with single-screw configuration rated for 1.03 bar (14.9 psi) at 148.9 °C (300 °F).

Материал:Нержавеющая сталь 316

Внутреннее давление:1.03 bar (14.9 psi)

Внутренняя температура:148.9 °C (300 °F)

Длина:4,100 mm (162 in) length

Количество винтов:Single-screw configuration

Состояние:Б/у состояние

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Материал:Нержавеющая сталь 304

Длина:3,050 mm (120 in) length

Давление в рубашке:0.34 bar (5 psi) jacket pressure

Количество винтов:Single-screw configuration

Состояние:Б/у состояние

Buy Used Holoflite & Screw Dryers for Sale by Condition

All holoflite and screw dryers currently in IPP’s inventory are in used condition. Used units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining original OEM screw and drive hardware.

Buy Used Holoflite & Screw Dryers for Sale

All holoflite and screw dryers in IPP’s current inventory are in good used condition. These units were previously installed in production service and retain their original OEM hollow-flight screws, trough bodies, drive assemblies, and heating jackets.

Used Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Состояние:Б/у состояние

Материал:Углеродистая сталь

Heat Transfer Surface Area:53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Количество винтов:Four-screw configuration

Used Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Состояние:Б/у состояние

Материал:Нержавеющая сталь 316L

Heat Transfer Surface Area:19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Количество винтов:Twin-screw configuration

Used Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Состояние:Б/у состояние

Материал:Углеродистая сталь

Heat Transfer Surface Area:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Количество винтов:Four-screw configuration

Ready to Buy a Used Holoflite & Screw Dryer?

Tell us your specifications and requirements. Our team will match your needs against current holoflite and screw dryer inventory and provide a detailed quote.

Buying Used Holoflite & Screw Dryers vs Buying New

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new holoflite & screw dryers compare across key factors.

Фактор	Использовано из IPP	Новый (OEM)
Стоимость оборудования	Значительная экономия по сравнению с ценой нового OEM-запчастя.	Полная прейскурантная цена OEM
Сроки доставки	Товары в наличии, готовы к отправке.	Extended lead times (new manufacturing)
Материалы	Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L	по индивидуальному заказу
Номинальные значения давления	0.005 bar (0.07 psi) to 5.5 bar (80 psi)	Изготовлено на заказ по спецификации.
Производители	Joy Denver, Svedala, Hi Line Industries and others	Один OEM
Воздействие на окружающую среду	Продлевает срок службы оборудования, сокращает количество отходов.	Новое потребление сырья

Advantages of Buying Used Holoflite & Screw Dryers from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver holoflite & screw dryers ready for your process.

Значительная экономия затрат

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Немедленная доступность

In-stock holoflite & screw dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom-manufactured new equipment with 12–16 week average delivery.

Множество OEM-производителей

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz and other manufacturers. Every unit is an original OEM product with traceable provenance.

Качество и ремонт

Компания IPP предлагает услуги по модернизации через свое подразделение UGE (Universal Glasteel Equipment), основанное в 1995 году, которое располагает запасами более 700 судов и более 2700 запчастей.

Глобальное присутствие в 15 странах

Компания IPP имеет офисы в 15 странах: Бразилии, Канаде, Китае, Чехии, Франции, Германии, Индии, Италии, Мексике, Пакистане, Португалии, Румынии, Турции, Великобритании и США. IPP обслужила более 160 000 клиентов по всему миру.

Полный спектр материалов и технических характеристик

IPP stocks holoflite & screw dryers across a wide range of specifications to match your process requirements.

How Buying a Used Holoflite & Screw Dryer Works

The process of purchasing used holoflite & screw dryers from IPP follows five steps, from specification to delivery.

1

Предоставьте необходимые документы.

Укажите ваши технические характеристики: производительность, материал конструкции, номинальное давление, температура и область применения. Или просмотрите наш каталог с возможностью поиска.

2

Получение пакета данных

Компания IPP высылает подробный технический паспорт оборудования с указанием характеристик, размеров, отчета о состоянии и фотографий.

3

Осмотрите оборудование

Свяжитесь с IPP, чтобы договориться о визите на место или запросить видеоэкскурсию с участием специалиста IPP в одном из наших офисов по всему миру.

4

Варианты реконструкции

Компания IPP предлагает услуги по модернизации через свое подразделение UGE (более 700 судов, более 2700 запчастей на складе). Для получения подробной информации о дополнительных услугах свяжитесь с компанией IPP.

5

Упаковка и доставка

Компания IPP координирует упаковку, обрешетку, транспортировку и доставку на ваш завод. Доставка по всему миру из офисов в 15 странах.

Industries That Buy Used Holoflite & Screw Dryers

IPP supplies used holoflite & screw dryers to manufacturers across multiple process industries worldwide.

Фармацевтическая

Химическая обработка

Продукты питания и напитки

Биотехнология

Агрохимикаты

Тонкая химия

Горнодобывающая промышленность и полезные ископаемые

Косметика

Краски и покрытия

Нефтехимия

Frequently Asked Questions About Buying Used Holoflite & Screw Dryers

Answers to the most common questions from procurement and operations teams evaluating used holoflite and screw dryers.

How many holoflite & screw dryers does IPP have in stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Available in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Browse the IMS inventory for current availability.

What condition grades are available for used holoflite & screw dryers?

IPP stocks holoflite & screw dryers in multiple conditions: Used. Ознакомьтесь с текущим ассортиментом, чтобы узнать о доступных вариантах состояния товара.

Does IPP sell new holoflite & screw dryers as well as used?

Да. IPP stocks new holoflite & screw dryers through its Gale Process Solutions (GPS) subsidiary, which provides custom-manufactured equipment with 12–16 week average delivery. Для получения подробной информации о новых поступлениях обращайтесь в компанию IPP.

Какие строительные материалы доступны?

IPP stocks holoflite & screw dryers in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Свяжитесь с компанией IPP, чтобы обсудить требования к материалам для вашего применения.

What manufacturers of holoflite & screw dryers does IPP stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Просмотрите текущий ассортимент, чтобы увидеть доступных производителей.

How much can I save buying used holoflite & screw dryers versus new?

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Точная экономия зависит от производителя, мощности, материала конструкции и состояния оборудования. Для получения информации о ценах на конкретные модели обращайтесь в компанию IPP.

How long does it take to receive holoflite & screw dryers from IPP?

In-stock holoflite & screw dryers are ready to ship. IPP's GPS subsidiary provides new custom-manufactured equipment with 12–16 week average delivery. Компания IPP осуществляет доставку из офисов в 15 странах мира.

Компания IPP занимается доставкой и грузоперевозками?

Компания IPP координирует упаковку, обрешетку, транспортировку и доставку на вашу производственную площадку. Офисы компании расположены в 15 странах. и Более 160 000 клиентов по всему миру., Компания IPP обладает обширным опытом в сфере глобальной логистики оборудования.

Other Parts & Equipment from IPP

In addition to holoflite & screw dryers, IPP stocks equipment across multiple categories for complete process solutions.

Фильтры

Центрифуги

Теплообменники

Looking for New Holoflite & Screw Dryers?

IPP Group supplies new equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom-manufactured equipment with 12–16 week average delivery. IPP also offers re-glassed equipment through its UGE (Universal Glasteel Equipment) division.

Ready to Buy Holoflite & Screw Dryers?

Компания IPP поставляет качественное технологическое оборудование по всему миру с 1980 года, обслуживая более 160 000 клиентов. Расскажите нам, что вам нужно — наша команда ответит, предоставив информацию о наличии и ценах.