Buy Used Holoflite & Screw Dryers for Sale

Buying used holoflite and screw dryers through International Process Plants gives chemical processing, wastewater treatment, mining, and pharmaceutical buyers access to indirect-heat dryers that use screws to convey and thermally process bulk solids in a single enclosed trough from Joy Denver, Svedala, Hi Line Industries, Reitz, Denver Equipment, Thies Kg Coesfeld Gmbh, and other OEM manufacturers. ▶

Materials of construction include Carbon Steel, Stainless Steel 316, Stainless Steel 304, and Stainless Steel 316L. Internal pressure ratings range from 0.005 bar (0.07 psi) on IPP# 208223 to 5.5 bar (80 psi) on IPP# 222018. Heat transfer surface areas span from 7.2 m² (78 ft²) on IPP# 91126 to 141.1 m² (1,500 ft²) on IPP# 232604. Screw configurations range from single-screw units through twin-screw and quad-screw designs.

IPP stocks Joy Denver units in the D-2420-6 and D12-20-5 model families. Svedala inventory includes the Q2424-6 quad-screw processor series. All units are in used condition. Buying used holoflite and screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

10+

Holoflite & Screw Dryers in Stock

1980

Établi depuis

15

Pays ayant des bureaux

Joy Denver D-2420-6 Carbon Steel

Used — 53 m² heat transfer area

Denver Equipment Stainless Steel 316L

Used — 19 m² heat transfer area

Svedala Q2424-6 Carbon Steel

Used — 141.1 m² heat transfer area

Buy Used Holoflite & Screw Dryers by Material

IPP stocks holoflite and screw dryers in carbon steel and multiple stainless steel grades. The material of construction determines corrosion resistance, maximum operating temperature, and compatibility with the product being dried.

Buy Used Carbon Steel Holoflite & Screw Dryers for Sale

Carbon steel is the deepest material position in IPP’s holoflite and screw dryer inventory. Available from Joy Denver and Svedala, these units suit general industrial drying where elevated corrosion resistance is not required.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Matériel:Acier au carbone

Surface d'échange thermique :53 m² (571 ft²) heat transfer area

Pression interne :5.5 bar (80 psi)

Température interne :343.3 °C (650 °F)

Nombre de vis :Four-screw configuration

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and hot-oil heating medium.

Matériel:Acier au carbone

Surface d'échange thermique :141.1 m² (1,500 ft²) heat transfer area

Pression interne :2,1 bar (30 psi)

Température interne :343.3 °C (650 °F)

Nombre de vis :Four-screw configuration

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area.

Surface d'échange thermique :11.9 m² (128 ft²) heat transfer area

Pression de la veste :2,1 bar (30 psi)

Température de la veste :343.3 °C (650 °F)

Nombre de vis :Single-screw configuration

Condition:État d'occasion

Buy Used Stainless Steel Holoflite & Screw Dryers for Sale

IPP stocks stainless steel holoflite and screw dryers in 316, 304, and 316L grades. Available from Denver Equipment, Thies Kg Coesfeld Gmbh, Hi Line Industries, and Reitz for corrosion-sensitive or sanitary drying applications.

Denver Equipment D-12-18-5 — 19 m²

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Matériel:Acier inoxydable 316L

Surface d'échange thermique :19 m² (204 ft²) heat transfer area

Pression interne :2,1 bar (30 psi)

Température interne :343.3 °C (650 °F)

Nombre de vis :Twin-screw configuration

Product Rate:907 kg/h (2,000 lb/h) product rate

Thies Kg Coesfeld Gmbh 2 V 410-24 — SS 316

Used Thies Kg Coesfeld Gmbh 2 V 410-24 stainless steel 316 holoflite and screw dryer with twin-screw design rated for 50 °C (122 °F) internal temperature.

Matériel:Acier inoxydable 316

Température interne :50 °C (122 °F) internal temperature

Pression de la veste :6 bar (87 psi) jacket pressure

Nombre de vis :Twin-screw configuration

Largeur:700 mm (27.6 in) W

Longueur:3,750 mm (147.6 in) L

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Matériel:Acier inoxydable 304

Longueur:3,050 mm (120 in) length

Pression de la veste :0.34 bar (5 psi) jacket pressure

Nombre de vis :Single-screw configuration

Condition:État d'occasion

Buy Used Holoflite & Screw Dryers for Sale by Manufacturer

IPP stocks holoflite and screw dryers from six OEM manufacturers, with Joy Denver and Svedala representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Joy Denver Holoflite & Screw Dryers for Sale

Joy Denver is the deepest single-manufacturer position in IPP’s holoflite and screw dryer inventory. Available models include the D-2420-6 quad-screw processor and the D12-20-5 single-screw unit, all in carbon steel construction.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area, rated for 5.5 bar (80 psi) at 343.3 °C (650 °F).

Matériel:Acier au carbone

Surface d'échange thermique :53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Nombre de vis :Four-screw configuration

Condition:État d'occasion

Joy Denver D-2420-6 — IPP# 222019

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Matériel:Acier au carbone

Surface d'échange thermique :53 m² (571 ft²) heat transfer area

Pression interne :5.5 bar (80 psi)

Température interne :343.3 °C (650 °F)

Nombre de vis :Four-screw configuration

Condition:État d'occasion

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area and 2.1 bar (30 psi) jacket pressure.

Surface d'échange thermique :11.9 m² (128 ft²) heat transfer area

Pression de la veste :2,1 bar (30 psi)

Température de la veste :343.3 °C (650 °F)

Nombre de vis :Single-screw configuration

Longueur:6,100 mm (240 in) length

Condition:État d'occasion

Buy Used Svedala Holoflite & Screw Dryers for Sale

Svedala is the second deepest OEM position in IPP’s holoflite and screw dryer inventory. Available units include the Q2424-6 quad-screw processor series in carbon steel construction with hot-oil heating medium.

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Matériel:Acier au carbone

Surface d'échange thermique :141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Nombre de vis :Four-screw configuration

Condition:État d'occasion

Svedala Q2424-6 — IPP# 232605

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Matériel:Acier au carbone

Surface d'échange thermique :141.1 m² (1,500 ft²) heat transfer area

Pression interne :2,1 bar (30 psi)

Température interne :343.3 °C (650 °F)

Nombre de vis :Four-screw configuration

Condition:État d'occasion

Svedala — 141.1 m² IPP# 232603

Used Svedala carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Matériel:Acier au carbone

Surface d'échange thermique :141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Nombre de vis :Four-screw configuration

Condition:État d'occasion

Buy Used Holoflite & Screw Dryers from Other Manufacturers

Beyond Joy Denver and Svedala, IPP stocks holoflite and screw dryers from Hi Line Industries, Reitz, Denver Equipment, and Thies Kg Coesfeld Gmbh. These units span stainless steel grades for corrosion-sensitive and sanitary drying duties.

Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Matériel:Acier inoxydable 316L

Surface d'échange thermique :19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Nombre de vis :Twin-screw configuration

Condition:État d'occasion

Hi Line Industries 2155M25 — SS 316

Used Hi Line Industries 2155M25 stainless steel 316 holoflite and screw dryer with single-screw configuration rated for 1.03 bar (14.9 psi) at 148.9 °C (300 °F).

Matériel:Acier inoxydable 316

Pression interne :1.03 bar (14.9 psi)

Température interne :148.9 °C (300 °F)

Longueur:4,100 mm (162 in) length

Nombre de vis :Single-screw configuration

Condition:État d'occasion

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Matériel:Acier inoxydable 304

Longueur:3,050 mm (120 in) length

Pression de la veste :0.34 bar (5 psi) jacket pressure

Nombre de vis :Single-screw configuration

Condition:État d'occasion

Buy Used Holoflite & Screw Dryers for Sale by Condition

All holoflite and screw dryers currently in IPP’s inventory are in used condition. Used units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining original OEM screw and drive hardware.

Buy Used Holoflite & Screw Dryers for Sale

All holoflite and screw dryers in IPP’s current inventory are in good used condition. These units were previously installed in production service and retain their original OEM hollow-flight screws, trough bodies, drive assemblies, and heating jackets.

Used Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Condition:État d'occasion

Matériel:Acier au carbone

Surface d'échange thermique :53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Nombre de vis :Four-screw configuration

Used Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Condition:État d'occasion

Matériel:Acier inoxydable 316L

Surface d'échange thermique :19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Nombre de vis :Twin-screw configuration

Used Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Condition:État d'occasion

Matériel:Acier au carbone

Surface d'échange thermique :141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Nombre de vis :Four-screw configuration

Ready to Buy a Used Holoflite & Screw Dryer?

Tell us your specifications and requirements. Our team will match your needs against current holoflite and screw dryer inventory and provide a detailed quote.

Buying Used Holoflite & Screw Dryers vs Buying New

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new holoflite & screw dryers compare across key factors.

Facteur	Utilisé à partir de l'IPP	Neuf (OEM)
Coût de l'équipement	Économies importantes par rapport au prix du nouveau constructeur	Prix catalogue complet du fabricant
Délai de livraison	Unités en stock prêtes à être expédiées	Extended lead times (new manufacturing)
Matériels	Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L	Spécifié sur mesure
Pressions nominales	0.005 bar (0.07 psi) to 5.5 bar (80 psi)	Fabriqué sur mesure selon les spécifications
Fabricants	Joy Denver, Svedala, Hi Line Industries and others	OEM unique
Impact environnemental	Prolonge la durée de vie des équipements, réduit les déchets	nouvelle consommation de matières premières

Advantages of Buying Used Holoflite & Screw Dryers from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver holoflite & screw dryers ready for your process.

Des économies de coûts importantes

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilité immédiate

In-stock holoflite & screw dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom-manufactured new equipment with 12–16 week average delivery.

Fabricants OEM multiples

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz and other manufacturers. Every unit is an original OEM product with traceable provenance.

Qualité et remise à neuf

IPP propose des services de remise à neuf par le biais de sa division UGE (Universal Glasteel Equipment), fondée en 1995, qui dispose d'un stock de plus de 700 navires et de plus de 2 700 pièces.

Présence mondiale dans 15 pays

IPP possède des bureaux dans 15 pays : Allemagne, Brésil, Canada, Chine, Espagne, États-Unis, France, Inde, Italie, Mexique, Pakistan, Portugal, République tchèque, Roumanie, Royaume-Uni et Turquie. IPP a servi plus de 160 000 clients dans le monde entier.

Gamme complète de matériaux et de spécifications

IPP stocks holoflite & screw dryers across a wide range of specifications to match your process requirements.

How Buying a Used Holoflite & Screw Dryer Works

The process of purchasing used holoflite & screw dryers from IPP follows five steps, from specification to delivery.

1

Soumettre les exigences

Indiquez vos spécifications : capacité, matériau de construction, pression nominale, température et application. Ou consultez notre catalogue.

2

Réception du paquet de données

IPP envoie une fiche technique détaillée de l'équipement comprenant les spécifications, les dimensions, un rapport d'état et des photographies.

3

Inspecter l'équipement

Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP specialist at one of our global locations.

4

Options de rénovation

IPP propose des services de rénovation par le biais de sa division UGE (plus de 700 navires, plus de 2 700 pièces en stock). Contactez IPP pour plus d'informations sur les services complémentaires.

5

Emballage et livraison

IPP prend en charge l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Expédition internationale depuis nos bureaux situés dans 15 pays.

Industries That Buy Used Holoflite & Screw Dryers

IPP supplies used holoflite & screw dryers to manufacturers across multiple process industries worldwide.

Pharmaceutique

Traitement chimique

Restauration

Biotechnologie

produits agrochimiques

Produits chimiques fins

Exploitation minière et minérale

Produits de beauté

Peintures et revêtements

Produits pétrochimiques

Frequently Asked Questions About Buying Used Holoflite & Screw Dryers

Answers to the most common questions from procurement and operations teams evaluating used holoflite and screw dryers.

How many holoflite & screw dryers does IPP have in stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Available in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Browse the IMS inventory for current availability.

What condition grades are available for used holoflite & screw dryers?

IPP stocks holoflite & screw dryers in multiple conditions: Used. Consultez l'inventaire actuel pour connaître les options disponibles.

Does IPP sell new holoflite & screw dryers as well as used?

Oui. IPP stocks new holoflite & screw dryers through its Gale Process Solutions (GPS) subsidiary, which provides custom-manufactured equipment with 12–16 week average delivery. Contactez IPP pour plus de détails sur les nouveaux stocks.

Quels matériaux de construction sont disponibles ?

IPP stocks holoflite & screw dryers in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Contactez IPP pour discuter des exigences matérielles de votre application.

What manufacturers of holoflite & screw dryers does IPP stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Consultez l'inventaire actuel pour voir les fabricants disponibles.

How much can I save buying used holoflite & screw dryers versus new?

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Les économies exactes dépendent du fabricant, de la capacité, des matériaux de construction et de l'état du produit. Contactez IPP pour obtenir un devis pour un modèle spécifique.

How long does it take to receive holoflite & screw dryers from IPP?

In-stock holoflite & screw dryers are ready to ship. IPP's GPS subsidiary provides new custom-manufactured equipment with 12–16 week average delivery. IPP expédie ses produits depuis des bureaux situés dans 15 pays à travers le monde.

IPP gère-t-il l'expédition et le fret ?

IPP coordonne l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Avec des bureaux dans 15 pays et Plus de 160 000 clients servis dans le monde entier, IPP possède une vaste expérience en matière de logistique mondiale d'équipements.

Autres pièces et équipements d'IPP

In addition to holoflite & screw dryers, IPP stocks equipment across multiple categories for complete process solutions.

Filtres

Centrifugeuses

Échangeurs de chaleur

Looking for New Holoflite & Screw Dryers?

Le groupe IPP fournit des équipements en alliage neufs par l'intermédiaire de sa filiale Gale Process Solutions (GPS), qui propose des équipements sur mesure avec un délai de livraison moyen de 12 à 16 semaines. IPP propose également des équipements neufs et reconditionnés par le biais de sa division UGE (Universal Glasteel Equipment).

Ready to Buy Holoflite & Screw Dryers?

Depuis 1980, IPP fournit des équipements de process de qualité dans le monde entier et compte plus de 160 000 clients. Faites-nous part de vos besoins : notre équipe vous proposera les produits et les prix adaptés.