Buy Used Nutsche Filters for Sale

Buying used nutsche filters through International Process Plants gives chemical, pharmaceutical, food and beverage, and environmental wastewater operators access to jacketed agitated pressure vessels that combine cake filtration, washing, and drying inside a single sealed enclosure from JENS OLSEN, Seitz-Werke, Wollner & Platz, Pfaudler, and other OEM manufacturers. ▶

Filtration areas span from 0.3 m² (3.2 ft²) on a Seitz-Werke 60/1 up to 6 m² (64.6 ft²) on a Von Roll unit. Vessel diameters run from 584 mm (23 in) to 2,800 mm (110.2 in) across the inventory. Internal pressure ratings reach 6 bar (87 psi), with units rated for vacuum service as well. Internal temperature ratings extend to 300 °C (572 °F) on Wollner & Platz vessels. Material grades include Stainless Steel 316, Stainless Steel Austenitic, and Glasslined construction.

Seitz and Seitz-Werke models include the 60/1, EF-100.300-CW, and EF100-500-CW series. Most vessels carry heating jackets rated up to 10.3 bar (150 psi) for steam or hot-oil drying duty. Selected units include rake or hydraulic raker agitators for cake smoothing and discharge. All listed units are offered in used condition with traceable IMS records. Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

10+

Nutsche Filters in Stock

1980

Établi depuis

15

Pays ayant des bureaux

Seitz-Werke Stainless Steel Austenitic

Utilisé

Pfaudler Glasslined

Utilisé

JENS OLSEN Stainless Steel 316

Utilisé

Buy Used Nutsche Filters by Material

IPP stocks nutsche filters across multiple material grades, including Stainless Steel 316, Stainless Steel Austenitic, and Glasslined construction. Choose the material that matches your process chemistry and corrosion requirements.

Buy Used Stainless Steel Nutsche Filters for Sale

IPP stocks stainless steel nutsche filters in both 316 and austenitic grades, suited to corrosive solvents, sanitary process duty, and elevated-temperature drying. Available from JENS OLSEN, Seitz-Werke, Seitz, Wollner & Platz, and Von Roll (Switzerland).

Von Roll Stainless Steel 316 — 6 m²

Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator for cake smoothing and discharge.

Zone de filtration :6 m² (64.6 ft²) filtration area

Diamètre:2,800 mm (110.2 in) diameter

Matériel:Acier inoxydable 316

Fabricant:Von Roll (Switzerland)

Rake:Rake agitator equipped

JENS OLSEN Stainless Steel 316 — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, jacketed pressure-and-vacuum service, and 1,900 mm (74.8 in) vessel diameter.

Zone de filtration :2.8 m² (29.6 ft²) filtration area

Diamètre:1,900 mm (74.8 in) diameter

Pression:2 bars (29 psi)

Température:134 °C (273.2 °F)

Vide:Vacuum-rated, jacketed

Matériel:Acier inoxydable 316

Seitz EF-100.300-CW — 0.85 m²

Used Seitz EF-100.300-CW stainless steel 316 nutsche filter with 0.85 m² (9.1 ft²) filtration area, 6 bar pressure rating, and jacketed body for hot-oil or steam drying.

Zone de filtration :0.85 m² (9.1 ft²) filtration area

Diamètre:1,000 mm (39.4 in) diameter

Pression:6 bars (87 psi)

Température:165 °C (329 °F)

Fabricant:Seitz

Modèle:EF-100.300-CW

Veste:Jacketed body, clamped bottom head

Buy Used Glass-Lined Nutsche Filters for Sale

IPP stocks Pfaudler glass-lined nutsche filters for highly corrosive acids, chlorinated solvents, and pharmaceutical intermediates that demand a non-reactive contact surface. Glass-lined construction protects the vessel and the product from metal pickup during long filtration and drying cycles.

Pfaudler Glasslined — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, 232.2 °C temperature rating, and a stainless steel 316 jacket rated to 10.3 bar for high-pressure steam.

Zone de filtration :0.52 m² (5.6 ft²) filtration area

Diamètre:813 mm (32 in) diameter

Pression:3,4 bar (50 psi)

Température:232.2 °C (450 °F)

Pression de la veste :Jacket 10.3 bar (150 psi), SS 316

Matériel:Glasslined wetted surfaces

Buy Used Nutsche Filters in Other Materials for Sale

IPP also lists nutsche filters whose primary material grade is not separately classified, typically jacketed shells suited to a range of utility duties. Contact our team for the latest material certifications and condition reports on these units.

Nutsche Filter — 889 mm (35 in) Diameter

Used nutsche filter with 889 mm (35 in) vessel diameter and a stainless steel 316 jacket, mounted on four lugs and ready for re-piping into a process line.

Diamètre:889 mm (35 in) diameter

Overall Height:508 mm (20 in) overall height

Veste MOC :Stainless Steel 316 jacket

Support Details:Mounted on lugs

Condition:État d'occasion

Buy Used Nutsche Filters for Sale by Manufacturer

IPP carries nutsche filters from a wide spread of OEM builders, with JENS OLSEN and Seitz-Werke representing the deepest named positions in current inventory. Buying from a recognized OEM helps ensure spare-part availability, plate and gasket compatibility, and operator familiarity with the discharge mechanism.

Buy Used JENS OLSEN Nutsche Filters for Sale

JENS OLSEN is one of the deepest named OEM positions in IPP’s nutsche filter inventory. Available units include jacketed stainless steel 316 vessels in pressure-and-vacuum configurations with hydraulic raker agitators.

JENS OLSEN Stainless Steel 316 — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum-rated jacket, and 1,000 mm (39.4 in) straight side length for deep cake handling.

Zone de filtration :2.8 m² (29.6 ft²) filtration area

Diamètre:1,900 mm (74.8 in) diameter

Pression:2 bars (29 psi)

Température:134 °C (273.2 °F)

Vide:Vacuum service rated

Matériel:Acier inoxydable 316

JENS OLSEN Stainless Steel 316 — 1.75 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 1.75 m² (18.8 ft²) filtration area, mounted in two A-frames, and a jacketed shell rated for 2 bar service.

Zone de filtration :1.75 m² (18.8 ft²) filtration area

Diamètre:1,500 mm (59.1 in) diameter

Pression:2 bars (29 psi)

Température:134 °C (273.2 °F)

Support Details:Mounted in A-frames

Matériel:Acier inoxydable 316

Buy Used Seitz-Werke Nutsche Filters for Sale

Seitz-Werke is another deep OEM position in IPP’s nutsche filter listings. Available model series include the small-batch 60/1 and the EF100-500-CW pressure filter.

Seitz-Werke 60/1 — 0.3 m²

Used Seitz-Werke 60/1 stainless steel austenitic nutsche filter with 0.3 m² (3.2 ft²) filtration area, 0.12 m³ cake volume, and half-pipe limpet jacket for thermal control during drying.

Zone de filtration :0.3 m² (3.2 ft²) filtration area

Cake Volume:0.12 m³ (4.2 ft³) cake volume

Pression:6 bars (87 psi)

Température:143 °C (289.4 °F)

Jacket Type:Half-pipe limpet jacket

Matériel:Acier inoxydable austénitique

Seitz-Werke EF100-500-CW — 200 °C

Used Seitz-Werke EF100-500-CW stainless steel 316 nutsche filter with 200 °C temperature rating, dished and clamped heads, and four-leg base for floor mounting.

Diamètre:910 mm (35.8 in) diameter

Pression:6 bars (87 psi)

Température:200 °C (392 °F)

Top Head Type:Dished

Type de tête inférieure :clamped heads

Support Details:Mounted on 4 legs

Matériel:Acier inoxydable 316

Buy Used Nutsche Filters from Other Manufacturers

Beyond JENS OLSEN and Seitz-Werke, IPP also lists nutsche filters from Pfaudler, Wollner & Platz, Von Roll (Switzerland), and Seitz. These units span small-batch glass-lined service through high-area cake handling for industrial duty.

Pfaudler Glasslined — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, elliptical clamped heads, and a 232.2 °C jacket rating for high-temperature drying duty.

Zone de filtration :0.52 m² (5.6 ft²) filtration area

Diamètre:813 mm (32 in) diameter

Pression:3,4 bar (50 psi)

Température:232.2 °C (450 °F)

Pression de la veste :Jacket 10.3 bar (150 psi)

Matériel:Glasslined construction

Von Roll (Switzerland) — 6 m²

Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator for industrial cake duty.

Zone de filtration :6 m² (64.6 ft²) filtration area

Diamètre:2,800 mm (110.2 in) diameter

Matériel:Acier inoxydable 316

Rake:Rake agitator equipped

Fabricant:Von Roll (Switzerland)

Wollner & Platz — 300 °C

Used Wollner & Platz stainless steel austenitic nutsche filter rated for 300 °C (572 °F) internal temperature, with sight-glass nozzles and jacket rated to 8 bar.

Diamètre:600 mm (23.6 in) diameter

Pression:6 bars (87 psi)

Température:300 °C (572 °F)

Pression de la veste :Jacket 8 bar (116 psi)

Nozzle Schedule:Sight-glass top nozzles

Matériel:Acier inoxydable austénitique

Buy Used Nutsche Filters for Sale by Condition

IPP currently lists nutsche filters in used condition. Each unit was previously installed in production service, inspected on intake, and is offered with traceable IMS records.

Buy Used Nutsche Filters for Sale

Used nutsche filters are the entire current condition position in IPP’s listings. These vessels carry their original OEM filter plates, jackets, and discharge hardware, and are offered as-is at the lowest price point.

Used Von Roll (Switzerland) — 6 m²

Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator.

Condition:État d'occasion

Zone de filtration :6 m² (64.6 ft²) filtration area

Diamètre:2,800 mm (110.2 in) diameter

Matériel:Acier inoxydable 316

Rake:Rake agitator equipped

Used Pfaudler Glasslined — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, jacket rated to 10.3 bar, and 232.2 °C internal temperature rating.

Condition:État d'occasion

Zone de filtration :0.52 m² (5.6 ft²) filtration area

Pression:3,4 bar (50 psi)

Température:232.2 °C (450 °F)

Pression de la veste :Jacket 10.3 bar (150 psi)

Matériel:Doublure en verre

Used JENS OLSEN — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum service rating, and 1,900 mm (74.8 in) diameter vessel.

Condition:État d'occasion

Zone de filtration :2.8 m² (29.6 ft²) filtration area

Diamètre:1,900 mm (74.8 in) diameter

Vide:Vacuum service rated

Matériel:Acier inoxydable 316

Ready to Buy a Used Nutsche Filter?

Tell us your specifications and requirements. Our team will match your needs against current nutsche filters inventory and provide a detailed quote.

Buying Used Nutsche Filters vs Buying New

Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new nutsche filters compare across key factors.

Facteur	Utilisé à partir de l'IPP	Neuf (OEM)
Coût de l'équipement	Économies importantes par rapport au prix du nouveau constructeur	Prix catalogue complet du fabricant
Délai de livraison	Unités en stock prêtes à être expédiées	Délais de livraison prolongés (nouvelle fabrication)
Matériels	Stainless Steel 316, Stainless Steel Austenitic, Glasslined	Spécifié sur mesure
Pressions nominales	2 bar (29 psi) to 6 bar (87 psi)	Fabriqué sur mesure selon les spécifications
Fabricants	Seitz-Werke, Wollner & Platz, JENS OLSEN and others	OEM unique
Impact environnemental	Prolonge la durée de vie des équipements, réduit les déchets	nouvelle consommation de matières premières

Advantages of Buying Used Nutsche Filters from IPP

International Process Plants combine plus de 46 ans d'expertise en équipements de traitement, près de 150 collaborateurs répartis dans 15 pays et un stock de 15 000 systèmes de traitement et équipements majeurs pour fournir des réacteurs prêts pour votre procédé.

Des économies de coûts importantes

Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilité immédiate

In-stock nutsche filters from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Fabricants OEM multiples

IPP stocks nutsche filters from Seitz-Werke, Wollner & Platz, JENS OLSEN, Seitz and other manufacturers. Every unit is an original OEM product with traceable provenance.

Qualité et remise à neuf

IPP propose des services de remise à neuf par le biais de sa division UGE (Universal Glasteel Equipment), fondée en 1995, qui dispose d'un stock de plus de 700 navires et de plus de 2 700 pièces.

Présence mondiale dans 15 pays

IPP possède des bureaux dans 15 pays : Allemagne, Brésil, Canada, Chine, Espagne, États-Unis, France, Inde, Italie, Mexique, Pakistan, Portugal, République tchèque, Roumanie, Royaume-Uni et Turquie. IPP a servi plus de 160 000 clients dans le monde entier.

Gamme complète de matériaux et de spécifications

IPP stocks nutsche filters across a wide range of specifications to match your process requirements.

How Buying a Used Nutsche Filter Works

The process of purchasing used nutsche filters from IPP follows five steps, from specification to delivery.

1

Soumettre les exigences

Indiquez vos spécifications : capacité, matériau de construction, pression nominale, température et application. Ou consultez notre catalogue.

2

Réception du paquet de données

IPP envoie une fiche technique détaillée de l'équipement comprenant les spécifications, les dimensions, un rapport d'état et des photographies.

3

Inspecter l'équipement

Contactez IPP pour organiser une visite sur site ou demandez une visite vidéo en direct avec un membre de l'équipe IPP dans l'un de nos sites à travers le monde.

4

Options de rénovation

IPP propose des services de rénovation par le biais de sa division UGE (plus de 700 navires, plus de 2 700 pièces en stock). Contactez IPP pour plus d'informations sur les services complémentaires.

5

Emballage et livraison

IPP prend en charge l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Expédition internationale depuis nos bureaux situés dans 15 pays.

Industries That Buy Used Nutsche Filters

IPP supplies used nutsche filters to manufacturers across multiple process industries worldwide.

Pharmaceutique

Traitement chimique

Biotechnologie

Restauration

Environnement

Pétrole et gaz

eaux usées

Produits chimiques fins

Peintures et revêtements

Produits pétrochimiques

Frequently Asked Questions About Buying Used Nutsche Filters

Answers to the most common questions from procurement and operations teams evaluating used nutsche filters.

How many nutsche filters does IPP have in stock?

IPP stocks nutsche filters from Seitz-Werke, Wollner & Platz, JENS OLSEN, Seitz, Pfaudler and other manufacturers. Available in Stainless Steel 316, Stainless Steel Austenitic, Glasslined construction. Browse the IMS inventory for current availability.

What condition grades are available for used nutsche filters?

IPP stocks nutsche filters in multiple conditions: Used. Consultez l'inventaire actuel pour connaître les options disponibles.

Does IPP sell new nutsche filters as well as used?

Oui. IPP stocks new nutsche filters through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Contactez IPP pour plus de détails sur les nouveaux stocks.

Quels matériaux de construction sont disponibles ?

IPP stocks nutsche filters in Stainless Steel 316, Stainless Steel Austenitic, Glasslined construction. Contactez IPP pour discuter des exigences matérielles de votre application.

What manufacturers of nutsche filters does IPP stock?

IPP stocks nutsche filters from Seitz-Werke, Wollner & Platz, JENS OLSEN, Seitz, Pfaudler and other manufacturers. Consultez l'inventaire actuel pour voir les fabricants disponibles.

How much can I save buying used nutsche filters versus new?

Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. Les économies exactes dépendent du fabricant, de la capacité, des matériaux de construction et de l'état du produit. Contactez IPP pour obtenir un devis pour un modèle spécifique.

How long does it take to receive nutsche filters from IPP?

In-stock nutsche filters are ready to ship. La filiale GPS d'IPP fournit de nouveaux équipements fabriqués sur mesure avec un délai de livraison moyen de 12 à 16 semaines. IPP expédie ses produits depuis des bureaux situés dans 15 pays à travers le monde.

IPP gère-t-il l'expédition et le fret ?

IPP coordonne l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Avec des bureaux dans 15 pays et Plus de 160 000 clients servis dans le monde entier, IPP possède une vaste expérience en matière de logistique mondiale d'équipements.

Autres types d'équipements d'IPP

In addition to nutsche filters, IPP stocks equipment across multiple categories for complete process solutions.

Centrifugeuses

Séchoirs

Réacteurs

Looking for New Pressure Leaf Filters?

Le groupe IPP fournit des équipements neufs par l'intermédiaire de sa filiale Gale Process Solutions (GPS), qui propose des équipements fabriqués sur mesure avec un délai de livraison moyen de 12 à 16 semaines. IPP propose également des équipements reconditionnés par le biais de sa division UGE (Universal Glasteel Equipment).

Ready to Buy Nutsche Filters?

Depuis 1980, IPP fournit des équipements de process de qualité dans le monde entier et compte plus de 160 000 clients. Faites-nous part de vos besoins : notre équipe vous proposera les produits et les prix adaptés.