Buy Used Mills for Sale

Buying used mills through International Process Plants gives chemical, pharmaceutical, food, mineral, and paints & coatings processors access to 64 used mills across 6 grinding and milling technologies—shot & sand (bead), colloid, ball, roll, pellet, and Kady mills from Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, and other OEM manufacturers. ▶

Materials of construction include stainless steel 304, 316, and austenitic grades, carbon steel, chrome-plated, and rubber-lined construction. Condition options include used, unused surplus, refurbished/rebuilt, and new. IPP stocks a wide range of industrial mills from leading brands.

Used mills are essential for micronizing APIs and excipients in pharmaceuticals. For grinding spices, sugars, grains, and dairy in food and beverage. For dispersing solids into coatings, inks, and additives in chemicals. And for dry or wet milling of calcium carbonate, kaolin, and metal ores in mineral processing. Buying used mills from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

60+

Mills in Stock

6

Mill Subtypes

25

OEM Manufacturer

Shot & Sand Mills

Featured: Netzsch SS 304 shot & sand mill

Moulins colloïdaux

Featured: Peters & Smith — 1.14 m³ (40.1 ft³)

Ball Mills

Featured: SS 304 ball mill — 1.59 m³ (56.1 ft³)

Laminoirs à rouleaux

Featured: Chrome 2- and 3-roll mill

Buy Used Mills for Sale by Subtype

IPP stocks used mills across 6 grinding and milling technologies. Browse representative units from each mill group below.

Shot & Sand Mills for Sale

Shot and sand mills (also called bead mills) are the deepest subtype position in IPP’s mill inventory with 33 units in stock. Used for wet grinding and dispersion of pigments, inks, coatings, and pharmaceutical slurries. Netzsch, Dyno WAB, Asada Machine Works, FrymaKoruma, and Merkel are the deepest brand positions.

Netzsch LMJ 55 SS 316 Shot & Sand

Used Netzsch LMJ 55 stainless steel 316 shot & sand mill. 408 mm (16.1 in) diameter by 1,450 mm (56.3 in) length horizontal mill driven by a 75 kW (100.6 HP) motor.

Fabricant:Netzsch LMJ 55

Matériel:Acier inoxydable 316

Diamètre:408 mm (16.1 in)

Longueur:1,450 mm (56.3 in)

Puissance du moteur :75 kW (100.6 HP)

Orientation:Horizontal

Power Transmission:Belt drive

Dyno WAB KD15 SS 316 — 0.01 m³ (0.35 ft³)

Used Dyno WAB KD15 stainless steel 316 clad shot & sand mill. 0.01 m3 (0.35 ft3) design capacity, 4 bar (58 psi) pressure rating with Loher 15 kW (20.1 HP) motor.

Conception de la capacité :0.01 m3 (0.35 ft3)

Matériel:Stainless Steel 316 (clad)

Diamètre:290 mm (11.4 in)

Longueur:430 mm (16.9 in)

Pression:4 bars (58 psi)

Puissance du moteur :15 kW (20.1 HP)

Asada Machine Works SS 304 — 0.22 m³ (7.8 ft³)

Used Asada Machine Works stainless steel 304 shot & sand mill. 0.22 m3 (7.8 ft3) design capacity with SS internal liner designed for easy replacement and 37.3 kW (50 HP) motor.

Conception de la capacité :0.22 m3 (7.8 ft3)

Matériel:Acier inoxydable 304

Diamètre:444.5 mm (17.5 in)

Longueur:1,450 mm (58 in)

Lining Type:SS internal liner

Puissance du moteur :37,3 kW (50 CV)

Colloid Mills for Sale

IPP stocks 14 used colloid mills for dispersion, emulsification, and particle size reduction of wet slurries. Manufacturers include Alpine (Hosokawa), Peters & Smith, IKA-Werk, Bepex, Williams, Reitz, and Premier Colloid Mills.

Peters & Smith SS 304 — 1.14 m³ (40.1 ft³)

Used Peters & Smith stainless steel 304 colloid mill. 1.14 m3 (40.1 ft3) design capacity with half-pipe limpet jacket rated to 3.4 bar (50 psi), Reliance 18.6 kW (25 HP) motor and chrome-plated steel shot media.

Conception de la capacité :1.14 m3 (40.1 ft3)

Matériel:Acier inoxydable 304

Diamètre:1,050 mm (42 in)

Longueur:1,550 mm (60.5 in)

Pression de la veste :3,4 bar (50 psi)

Puissance du moteur :18.6 kW (25 HP)

Médias:5/16″ chrome-plated steel shot

Alpine (Hosokawa) 1 SH SS 304

Used Alpine (Hosokawa) Model 1 SH stainless steel 304 colloid mill. 88.9 mm (3.5 in) diameter by 2,450 mm (96 in) long with 5.6 kW (7.5 HP) Reliance motor running at 9,600 RPM drive speed.

Modèle:Alpine (Hosokawa) 1 SH

Matériel:Acier inoxydable 304

Diamètre:88,9 mm (3,5 pouces)

Longueur:2 450 mm (96 po)

Drive Power:5,6 kW (7,5 CV)

Drive RPM:9,600

New Gale Multi-Mill SS 316

New Gale Process Solutions Multi-Mill stainless steel 316 colloid mill. 0.008 m3 (0.3 ft3) design capacity with 330 mm (13 in) diameter, vertical orientation, and 2.2 kW (3 HP) direct-coupled drive at 1,440 RPM.

Condition:New (Gale Process Solutions)

Matériel:Acier inoxydable 316

Conception de la capacité :0.008 m3 (0.3 ft3)

Diamètre:330 mm (13 in)

Drive Power:2.2 kW (3 HP)

Drive RPM:1,440

Orientation:Vertical

Ball & Roll Mills for Sale

IPP stocks 8 used ball mills and 6 used roll mills. Ball mill manufacturers include Blaw Knox, Hardinge, TEMA Siebtechnik, and Engineering Plastics. Roll mills include Gundlach, Farrell, and lab-scale 2-roll units.

Hardinge Carbon Steel Ball Mill

Used Hardinge carbon steel ball mill. 2,150 mm (84.1 in) diameter by 1,500 mm (59.8 in) length with 111.9 kW (150 HP) belt-driven motor and electric power transmission.

Fabricant:Hardinge

Matériel:Acier au carbone

Diamètre:2,150 mm (84.1 in)

Longueur:1,500 mm (59.8 in)

Puissance du moteur :111,9 kW (150 ch)

Power Transmission:Belt drive

Blaw Knox Carbon Steel Ball Mill

Used Blaw Knox carbon steel ball mill with Ni-hard liner. 1,850 mm (72 in) diameter by 3,050 mm (120 in) length, rated to 10.7 bar (155 psi) and 343.3 degrees C (650 degrees F) with full vacuum capability.

Fabricant:Blaw Knox

Diamètre:1 850 mm (72 pouces)

Longueur:3 050 mm (120 pouces)

Pression:10.7 bar (155 psi)

Température:343.3 °C (650 °F)

Lining Type:CS/Ni-hard lined

Vide:Yes (full vacuum)

Gundlach 4080S Stainless 2-Roll Mill

Used Gundlach Model 4080S stainless steel 2-roll mill. 610 mm (24 in) roll diameter by 2,450 mm (96 in) roll length, driven by a 111.9 kW (150 HP) motor at 60 Hz.

Modèle:Gundlach 4080S

Matériel:Acier inoxydable

Roll Diameter:610 mm (24 po)

Roll Length:2 450 mm (96 po)

Number of Rolls:2

Puissance du moteur :111,9 kW (150 ch)

Pellet & Kady Mills for Sale

IPP stocks 2 pellet mills and 1 Kady mill across specialty milling applications. Pellet mills include Baker Perkins and Black Clawson units; the Kady mill is a Powtec RTS 350 with a stainless steel 304 rotor-stator.

Baker Perkins SS 304 Pellet Mill

Used Baker Perkins stainless steel 304 pellet mill. 177.8 mm (7 in) diameter die with adjustable cutting blade running at 10,000 RPM, 3.7 kW (5 HP) electric drive, and 200 micron die outlets.

Fabricant:Baker Perkins

Matériel:Acier inoxydable 304

Diamètre:177.8 mm (7 in)

Blade Speed:10,000 RPM

Drive Power:3,7 kW (5 CV)

Die Outlets:200 micron

Black Clawson SS 316 Pellet Mill

Used Black Clawson Model 114012320 stainless steel 316 pellet mill. 22 kW (29.5 HP) drive at 1,470 RPM with 1.98 mm diameter die holes, rated to 230 degrees C (446 degrees F).

Fabricant:Black Clawson

Matériel:Acier inoxydable 316

Drive Power:22 kW (29,5 CV)

Drive RPM:1,470

Température:230 °C (446 °F)

Die Holes:1.98 mm (0.078 in) diameter

Powtec RTS 350 x 300 Kady Mill SS 304

Used Powtec RTS 350 x 300 stainless steel 304 Kady mill. 350 mm (13.8 in) diameter by 300 mm (11.8 in) length with 3 kW (4 HP) drive at 1,400 RPM and 0.16 m2 (1.72 ft2) sieve surface area.

Modèle:Powtec RTS 350 x 300

Matériel:Acier inoxydable 304

Diamètre:350 mm (13.8 in)

Longueur:300 mm (11.8 in)

Drive Power:3 kW (4 HP)

Sieve Area:0.16 m2 (1.72 ft2)

Buy Used Mills for Sale by Manufacturer

IPP stocks mills from a wide range of OEMs, with Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), and Dyno WAB representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, replacement parts, and operator familiarity.

Buy Used Netzsch Mills for Sale

Netzsch is the deepest single-manufacturer position in IPP’s mill inventory with 13 units. Available models include LMC 60CE, LME 20, LMJ 55, and LME4DCMS series shot & sand mills.

Netzsch LMC 60CE Carbon Steel

Used Netzsch LMC 60CE carbon steel shot & sand mill. 0.06 m3 (2.1 ft3) design capacity, 300 mm (11.8 in) diameter by 945 mm (37.2 in) horizontal with 37.3 kW (50 HP) motor and on/off controls.

Modèle:LMC 60CE

Capacité:0.06 m3 (2.1 ft3)

Matériel:Acier au carbone

Diamètre:300 mm (11.8 in)

Longueur:945 mm (37.2 in)

Puissance du moteur :37,3 kW (50 CV)

Netzsch LME 20 Carbon Steel

Used Netzsch LME 20 carbon steel shot & sand mill. 0.02 m3 (0.71 ft3) capacity with 220 mm (8.7 in) diameter, 700 mm (27.6 in) length, 22.4 kW (30 HP) motor and 0.25 m3 (8.8 ft3) media volume.

Modèle:LME 20

Capacité:0.02 m3 (0.71 ft3)

Diamètre:220 mm (8.7 in)

Longueur:700 mm (27,6 po)

Puissance du moteur :22,4 kW (30 CV)

Media Volume:0.25 m3 (8.8 ft3)

Netzsch LME4DCMS SS 304

Used Netzsch LME4DCMS stainless steel 304 shot & sand mill. 152.4 mm (6 in) diameter by 457.2 mm (18 in) length with 3.7 kW (5 HP) drive, mounted on dollie wheels for easy moving.

Modèle:LME4DCMS

Matériel:Acier inoxydable 304

Diamètre:152,4 mm (6 pouces)

Longueur:457,2 mm (18 pouces)

Drive Power:3,7 kW (5 CV)

Mounting:Dollie wheels

Buy Refurbished Merkel Mills for Sale

IPP stocks 4 refurbished/rebuilt Merkel shot & sand mills. Diameters range from 70 mm (2.8 in) to 80 mm (3.1 in), reconditioned for like-new performance at refurbished pricing.

Merkel Refurbished — 70 mm

Refurbished/Rebuilt Merkel shot & sand mill. 70 mm (2.8 in) diameter, reconditioned to original specifications.

Fabricant:Merkel

Condition:Rénové/Reconstruit

Diamètre:70 mm (2.8 in)

Sous-type :Shot & Sand

Merkel Refurbished — 80 mm

Refurbished/Rebuilt Merkel shot & sand mill. 80 mm (3.1 in) diameter, reconditioned to OEM specifications.

Fabricant:Merkel

Condition:Rénové/Reconstruit

Diamètre:80 mm (3.1 in)

Sous-type :Shot & Sand

Merkel 630597U Refurbished

Refurbished/Rebuilt Merkel Model 630597U shot & sand mill. 70 mm (2.8 in) diameter unit reconditioned to OEM specifications.

Modèle:Merkel 630597U

Condition:Rénové/Reconstruit

Diamètre:70 mm (2.8 in)

Sous-type :Shot & Sand

Buy Used Asada Machine Works Mills for Sale

IPP stocks 3 Asada Machine Works stainless steel 304 shot & sand mills with matched 0.22 m3 (7.8 ft3) capacity and 37.3 kW (50 HP) drives.

Asada SS 304 — 0.22 m³ (7.8 ft³) (1)

Used Asada Machine Works stainless steel 304 shot & sand mill. 0.22 m3 (7.8 ft3) capacity, 444.5 mm (17.5 in) diameter by 1,450 mm (58 in) length with SS jacket and 37.3 kW (50 HP) motor.

Capacité:0.22 m3 (7.8 ft3)

Matériel:Acier inoxydable 304

Diamètre:444.5 mm (17.5 in)

Longueur:1,450 mm (58 in)

Puissance du moteur :37,3 kW (50 CV)

Veste:Acier inoxydable

Asada SS 304 — 0.22 m³ (7.8 ft³) (2)

Used Asada Machine Works stainless steel 304 shot & sand mill. 0.22 m3 (7.8 ft3) capacity with SS internal liner designed for easy replacement and 37.3 kW (50 HP) motor.

Capacité:0.22 m3 (7.8 ft3)

Matériel:Acier inoxydable 304

Diamètre:444.5 mm (17.5 in)

Longueur:1,450 mm (58 in)

Lining:SS internal liner

Puissance du moteur :37,3 kW (50 CV)

Asada SS 304 — 0.22 m³ (7.8 ft³) (3)

Used Asada Machine Works stainless steel 304 shot & sand mill. Matched 0.22 m3 (7.8 ft3) capacity, 444.5 mm (17.5 in) diameter, SS internal liner, and 37.3 kW (50 HP) motor — ideal for parallel-line scale-up.

Capacité:0.22 m3 (7.8 ft3)

Matériel:Acier inoxydable 304

Lining:SS internal liner

Puissance du moteur :37,3 kW (50 CV)

Sous-type :Shot & Sand

Buy Used Alpine (Hosokawa) Mills for Sale

IPP stocks 3 Alpine (Hosokawa) colloid mills across Model W, Model 1 SH, and Model B160 UPZ configurations.

Alpine (Hosokawa) Model W SS 304

Used Alpine (Hosokawa) Model W stainless steel 304 colloid mill. 0.25 kW (0.33 HP) drive at 14,000 RPM with Reliance Type P 56-frame motor — ideal for laboratory and pilot-scale dispersion.

Modèle:Alpine (Hosokawa) W

Matériel:Acier inoxydable 304

Drive Power:0.25 kW (0.33 HP)

Drive RPM:14,000

Motor:Reliance Type P

Alpine (Hosokawa) 1 SH SS 304

Used Alpine (Hosokawa) Model 1 SH stainless steel 304 colloid mill. 88.9 mm (3.5 in) diameter by 2,450 mm (96 in) long with 5.6 kW (7.5 HP) Reliance motor at 9,600 RPM and mounted on castors.

Modèle:Alpine (Hosokawa) 1 SH

Diamètre:88,9 mm (3,5 pouces)

Longueur:2 450 mm (96 po)

Drive Power:5,6 kW (7,5 CV)

Drive RPM:9,600

Motor:TEFC Reliance

Alpine (Hosokawa) B160 UPZ SS 304

Used Alpine (Hosokawa) Model B160 UPZ stainless steel 304 colloid mill. 45 mm (1.77 in) diameter by 1,500 mm (60 in) length, 7.5 kW (10 HP) belt-driven Reliance motor at 3,510 RPM, vertical orientation.

Modèle:B160 UPZ

Matériel:Acier inoxydable 304

Diamètre:45 mm (1.77 in)

Longueur:1 500 mm (60 pouces)

Drive Power:7,5 kW (10 CV)

Orientation:Vertical

Buy Used Mills from Other OEMs

Beyond Netzsch, Merkel, Asada Machine Works, and Alpine (Hosokawa), IPP stocks mills from Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, Gundlach, Farrell, Baker Perkins, Black Clawson, IKA-Werk, and many other OEMs. IPP also stocks unbranded inventory where the original OEM is not recorded; specifications come directly from the IMS product page attributes.

FrymaKoruma MS50 SS 304

Used FrymaKoruma MS50 stainless steel 304 shot & sand mill. 54.4 kW (73 HP) drive, 4 bar (58 psi) pressure rating, 90 degrees C (194 degrees F) temperature, mounted in explosion-proof boxes.

Modèle:FrymaKoruma MS50

Matériel:Acier inoxydable 304

Drive Power:54.4 kW (73 HP)

Pression:4 bars (58 psi)

Température:90 °C (194 °F)

Mounting:Explosion-proof

Dyno WAB KD 60C SS Austenitic

Used Dyno WAB KD 60C stainless steel austenitic shot & sand mill. 0.06 m3 (2.1 ft3) capacity, 300 mm (11.8 in) diameter by 960 mm (37.8 in) length, chrome barrel, 44 kW (59 HP) Loher motor at 1,485 RPM.

Modèle:Dyno WAB KD 60C

Matériel:SS Austenitic

Capacité:0.06 m3 (2.1 ft3)

Diamètre:300 mm (11.8 in)

Longueur:960 mm (37.8 in)

Puissance du moteur :44 kW (59 HP)

Barrel:Chrome

IKA-Werk W32KAAABAA6660 SS 316

Used IKA-Werk Model W32KAAABAA6660 stainless steel 316 colloid mill. 0.003 m3 (0.11 ft3) capacity, 25 bar (362.6 psi) pressure, 200 degrees C (392 degrees F), 11.2 kW (15 HP) electric drive.

Modèle:IKA-Werk W32KAAABAA6660

Matériel:Acier inoxydable 316

Capacité:0.003 m3 (0.11 ft3)

Pression:25 bar (362.6 psi)

Température:200 °C (392 °F)

Drive Power:11,2 kW (15 CV)

Buy Used Mills for Sale by Condition

IPP stocks mills in used, unused surplus, refurbished/rebuilt, and new condition grades. Choose the condition that matches your budget, timeline, and performance requirements.

Buy Used Mills for Sale

Good used mills are the deepest condition position in IPP’s mill inventory. These units were previously installed in production service, inspected on intake, and offered as-is at the lowest price point while retaining OEM construction and components.

Used Netzsch LMC 60CE Shot & Sand

Used Netzsch LMC 60CE carbon steel shot & sand mill. 0.06 m3 (2.1 ft3) capacity with horizontal orientation and 37.3 kW (50 HP) motor.

Condition:Utilisé

Matériel:Acier au carbone

Capacité:0.06 m3 (2.1 ft3)

Used Hardinge Carbon Steel Ball Mill

Used Hardinge carbon steel ball mill. 2,150 mm (84.1 in) diameter, 111.9 kW (150 HP) motor with belt drive.

Condition:Utilisé

Matériel:Acier au carbone

Diamètre:2,150 mm (84.1 in)

Used Reitz RD-18-H32 Colloid Mill

Used Reitz Model RD-18-H32 carbon steel colloid mill. 457.2 mm (18 in) diameter vertical mill with 37.3 kW (50 HP) drive and Siemens belt-driven motor.

Condition:Utilisé

Modèle:Reitz RD-18-H32

Drive Power:37,3 kW (50 CV)

Buy Unused Surplus Mills for Sale

Unused surplus mills were manufactured but never installed in a process. These units offer new-equipment performance with immediate availability at a meaningful discount compared to factory-new orders.

Unused Roll Mill — 2 Roll

Unused 2-roll mill. 203.2 mm (8 in) roll diameter by 406.4 mm (16 in) roll length, manually adjustable rolls cored for steam heating, 11 kW (14.8 HP) Hi-Seal motor at 1,460 RPM.

Condition:Inutilisé

Roll Diameter:203.2 mm (8 in)

Roll Length:406,4 mm (16 pouces)

Heating:Steam-heated rolls

Puissance du moteur :11 kW (14.8 HP)

Unused Netzsch SS Other Shot & Sand

Unused Netzsch stainless steel shot & sand mill. 0.02 m3 (0.71 ft3) design capacity — factory inventory never installed.

Condition:Inutilisé

Fabricant:Netzsch

Matériel:SS Autres

Capacité:0.02 m3 (0.71 ft3)

Buy Refurbished/Rebuilt Mills for Sale

Refurbished/rebuilt mills have been reconditioned to OEM specifications. These units offer like-new performance at used pricing — ideal for processors who need warranted reliability without new-equipment lead times.

Merkel Refurbished — 70 mm

Refurbished/Rebuilt Merkel shot & sand mill. 70 mm (2.8 in) diameter, reconditioned to original specifications.

Condition:Rénové/Reconstruit

Fabricant:Merkel

Diamètre:70 mm (2.8 in)

NFT Refurbished Shot & Sand — 80 mm

Refurbished/Rebuilt NFT shot & sand mill. 80 mm (3.1 in) diameter, reconditioned for like-new operation.

Condition:Rénové/Reconstruit

Fabricant:NFT

Diamètre:80 mm (3.1 in)

Merkel 630597U Refurbished

Refurbished/Rebuilt Merkel Model 630597U shot & sand mill. 70 mm (2.8 in) diameter unit reconditioned to OEM specifications.

Condition:Rénové/Reconstruit

Modèle:Merkel 630597U

Diamètre:70 mm (2.8 in)

Buy New Mills for Sale

IPP stocks new mills built through its Gale Process Solutions (GPS) subsidiary. GPS provides custom fabricated equipment with 12–16 week average delivery.

New Gale Multi-Mill SS 316 Colloid

New Gale Process Solutions Multi-Mill stainless steel 316 colloid mill. 0.008 m3 (0.3 ft3) capacity, 330 mm (13 in) diameter, vertical orientation with 2.2 kW (3 HP) direct-coupled Hindustan motor at 1,440 RPM.

Condition:Nouveau

Fabricant:Solutions de processus Gale

Matériel:Acier inoxydable 316

Capacité:0.008 m3 (0.3 ft3)

Drive Power:2.2 kW (3 HP)

Mounting:Base plate w/ casters

Used Mill vs New Mill

Compare the trade-offs between buying a used or refurbished mill from IPP versus ordering a new mill from an OEM.

Attribute	Used Mill from IPP	New Mill from OEM
Capital cost	Up to 50% lower	Prix catalogue complet du fabricant
Lead time	In stock; up to 90% shorter	12–16 weeks typical
Condition options	Used, unused, refurbished, new	New only
Manufacturers available	25+ OEMs in inventory	Single OEM per order
Materials of construction	SS 304/316, CS, chrome, austenitic, rubber-lined	Material per specification
Inspection & data	IPP photo & spec package; on-site or video walkthrough	Drawing review only until FAT
Cost of trial / pilot	Low — matched units available for parallel lines	High — full new-build cost per pilot unit

Need a Used Mill? Ask an IPP Expert.

Tell us your material, throughput, particle size, and drive power requirements. Our team will match your specifications against mills in current inventory and provide a detailed quote.

Advantages of Buying Used Mills from IPP

International Process Plants combine plus de 46 ans d'expertise en équipements de traitement, près de 150 collaborateurs répartis dans 15 pays et un stock de 15 000 systèmes de traitement et équipements majeurs pour fournir des réacteurs prêts pour votre procédé.

Des économies de coûts importantes

Buying used mills from IPP can save up to 50% of capital and 90% of lead time versus buying new. With 64 mills across 6 subtypes, IPP offers a broad selection to match your budget and process requirements.

Disponibilité immédiate

In-stock mills from IPP are ready to ship. New OEM mills require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new mills with 12–16 week average delivery.

6 Mill Subtypes in One Inventory

IPP stocks shot & sand, colloid, ball, roll, pellet, and Kady mills. One supplier for all your milling equipment needs.

Matériaux de construction multiples

Materials include stainless steel (SS 304, 316, austenitic), carbon steel, chrome-plated, and rubber-lined construction. Match the material to your process chemistry and abrasion requirements.

Présence mondiale dans 15 pays

IPP possède des bureaux dans 15 pays : Allemagne, Brésil, Canada, Chine, Espagne, États-Unis, France, Inde, Italie, Mexique, Pakistan, Portugal, République tchèque, Roumanie, Royaume-Uni et Turquie. IPP a servi plus de 160 000 clients dans le monde entier.

Leading OEM Manufacturers

IPP stocks mills from Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, Gundlach, and many additional manufacturers. Every unit is an original OEM product with traceable provenance.

How Buying a Used Mill Works

The process of purchasing a used mill from IPP follows five steps, from specification to delivery.

1

Soumettre les exigences

Share your mill specifications: subtype, capacity, material, particle size, drive power, and application. Or browse our searchable mill inventory.

2

Réception du paquet de données

IPP sends a detailed equipment data sheet with capacity, dimensions, drive power, RPM, material of construction, and condition report with photographs.

3

Inspecter l'équipement

Contactez IPP pour organiser une visite sur site ou demandez une visite vidéo en direct du réacteur avec un membre de l'équipe IPP dans l'un de nos sites à travers le monde.

4

Options de rénovation

Contact IPP to discuss refurbishment, re-lining, replacement of grinding media, or other reconditioning services. IPP stocks refurbished Merkel and NFT shot & sand mills as proof of in-house reconditioning capability.

5

Emballage et livraison

IPP prend en charge l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Expédition internationale depuis nos bureaux situés dans 15 pays.

Browse All Mill Types

IPP stocks used mills across 6 milling technologies. Click any card below to view the full inventory and specifications for that mill type.

Shot & Sand Mills

Wet grinding bead mills for pigment dispersion, inks, coatings, and slurries.

Moulins colloïdaux

Rotor-stator mills for emulsification and fine wet dispersion of liquids and slurries.

Ball Mills

Rotating drum mills with steel or ceramic balls for impact and attrition grinding.

Laminoirs à rouleaux

2- and 3-roll mills for paste, pigment, and polymer dispersion with steam-heated rolls.

Moulins à granulés

Die-extrusion mills for granulating feeds, fuels, and process materials into pellets.

Kady Mills

High-shear rotor-stator mills with integrated sieve for size-controlled wet dispersion.

Related Process Equipment

Mills are commonly paired with size-reduction, mixing, and drying equipment. Browse adjacent IPP equipment categories.

Pulvérisateurs

Hammer, impact, and pin mills for dry size reduction of friable solids.

Mélangeurs

Ribbon, paddle, conical, and high-shear mixers for upstream and downstream blending.

Séchoirs

Rotary vacuum, fluid bed, spray, and ribbon dryers for moisture removal after milling.

Industries That Buy Used Mills

IPP supplies used mills to manufacturers across pharmaceutical, food, chemical, mineral, and paints & coatings industries worldwide.

Pharmaceutique

Traitement chimique

Restauration

Minéraux et exploitation minière

Peintures et revêtements

Pigments & Inks

Céramiques et matériaux

Produits chimiques fins

produits agrochimiques

Produits de beauté

Frequently Asked Questions About Buying Used Mills

Answers to the most common questions from process teams and procurement teams evaluating used mills.

What types of mills does IPP stock?

IPP stocks 64 used mills across 6 subtypes: shot & sand mills (33 units), colloid mills (14 units), ball mills (8 units), roll mills (6 units), pellet mills (2 units), and Kady mills (1 unit). Manufacturers include Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, Gundlach, and others. Consultez l'inventaire IMS pour connaître la disponibilité actuelle. contacter l'IPP to discuss your specific milling requirements.

What is the difference between a shot & sand mill and a ball mill?

Shot & sand mills (also called bead mills) are typically horizontal or vertical wet grinding mills that use small grinding media (sand, glass beads, ceramic shot) to disperse pigments, inks, and slurries. Ball mills are larger rotating drums that use steel or ceramic balls to grind dry or wet materials by impact and attrition, typically for minerals, ceramics, and bulk solids. In IPP's inventory, shot & sand mills span 70–914 mm chamber diameters with moderate motor power, while ball mills include large rotating drums up to 2,150 mm (84.1 in) diameter with 111.9 kW (150 HP) drives.

Quels matériaux de construction sont disponibles ?

IPP stocks mills in stainless steel 304, 316, and austenitic grades, carbon steel, chrome-plated, and rubber-lined construction. Stainless steel 304/316 is preferred for food, pharmaceutical, and hygienic applications. Hardened carbon steel serves heavy-duty mineral and metal grinding. Rubber-lined and chrome-barreled designs serve corrosive and abrasive duties.

How much can I save buying a used mill versus new?

Buying used mills from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on mill subtype, manufacturer, material of construction, capacity, drive power, and condition. Contact IPP for pricing on specific units from our current mill inventory.

What condition grades are available for used mills?

IPP stocks mills in four condition grades: used, unused, refurbished/rebuilt, and new. Used units are previously installed equipment offered as-is. Unused units were manufactured but never installed in a process. Refurbished/rebuilt units — including Merkel and NFT shot & sand mills — have been reconditioned to OEM specifications. New units are factory-new equipment such as the Gale Process Solutions Multi-Mill.

What is the largest ball mill in IPP inventory?

The largest ball mills in IPP's mill inventory are the Hardinge units at 2,150 mm (84.1 in) diameter by 1,500 mm (59.8 in) length with 111.9 kW (150 HP) drives, and the Blaw Knox units at 1,850 mm (72 in) diameter by 3,050 mm (120 in) length rated to 10.7 bar (155 psi) and 343.3 °C (650 °F) with full vacuum. Contact IPP for current availability and condition details on these heavy-duty units.

Looking for New Mills?

IPP Group supplies new process equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. If you cannot find what you need in our used mill inventory, we can build to your specifications.

Ready to Buy a Used Mill?

Depuis 1980, IPP fournit des équipements de process de qualité dans le monde entier et compte plus de 160 000 clients. Faites-nous part de vos besoins : notre équipe vous proposera les produits et les prix adaptés.

Attribute

Used Mill from IPP

New Mill from OEM

Capital cost

Up to 50% lower

Prix catalogue complet du fabricant

Lead time

In stock; up to 90% shorter

12–16 weeks typical

Condition options

Used, unused, refurbished, new

New only

Manufacturers available

25+ OEMs in inventory

Single OEM per order

Materials of construction

SS 304/316, CS, chrome, austenitic, rubber-lined

Material per specification

Inspection & data

IPP photo & spec package; on-site or video walkthrough

Drawing review only until FAT

Cost of trial / pilot

Low — matched units available for parallel lines

High — full new-build cost per pilot unit