Buy Used Process & Industrial Filters for Sale

Buying used process and industrial filters through International Process Plants gives chemical, pharmaceutical, food and beverage, and environmental manufacturers access to pressure leaf filters, Rosenmund & Cogiem filter dryers, and nutsche filters with filtration areas from 0.03 m² to 80 m² in stainless steel, Hastelloy, and glass-lined construction. Buying used can save up to 50% of capital and 90% of lead time versus buying new. ▶

Materials of construction include stainless steel 316, 316L, 304, 321, Hastelloy C-22 and C-276, and glass-lined. Filtration areas range from 0.03 m² (0.32 ft²) to 80 m² (861 ft²). Internal pressure ratings range from 2 bar (29 psi) to 27.6 bar (400 psi). Jacketed options are available across the inventory for temperature-controlled filtration operations.

IPP stocks process and industrial filters with multiple formats to match flow rate and solids content, jacketed options for temperature-sensitive operations, and ASME code-rated vessels for pressure applications. Options include automated cake discharge and backflushing. Condition options include good used, unused, and new. Buying used filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

3

Filter Subtypes

1980

Établi depuis

15

Pays ayant des bureaux

Pressure Leaf Filters

Sparkler, Schenk, Chemap & more

Rosenmund & Cogiem Filter Dryers

3V Cogeim, Guedu, GL Filtrations & more

Filtres Nutsche

Pfaudler, Seitz-Werke, JENS OLSEN & more

Buy Used Industrial and Process Filters by Type

IPP stocks industrial filters across three subtypes: pressure leaf, Rosenmund & Cogiem filter dryers, and nutsche filters. Select a filter type below to view featured inventory.

Buy Used Pressure Leaf Filters for Sale

Pressure leaf filters offer continuous, enclosed operation ideal for fine filtration. IPP stocks pressure leaf filters from manufacturers including Sparkler, Schenk, Chemap, Gale Process Solutions, and more. Available in stainless steel 316, 316L, 304, 321, and austenitic grades.

Diessel Hildesheim SS 316L — 2.2 m²

Used Diessel Hildesheim stainless steel 316L horizontal pressure leaf filter with 2.2 m² (24 ft²) filtration area and vacuum capability.

Zone de filtration :2.2 m² (24 ft²) filtration area

Pression:6 bars (87 psi)

Température:148,9°C (300°F)

Vide:Capacité de vide complète

Veste:Oui

Jacket Type:Standard

Veste MOC :Acier inoxydable 316L

Orientation:Horizontal

Diamètre:508 mm (20 in) dia.

Gale Process Solutions BPEFP — 2.4 m²

New Gale Process Solutions stainless steel 316 vertical pressure leaf filter with 2.4 m² (25.8 ft²) filtration area and 15 horizontal plates.

Zone de filtration :2.4 m² (25.8 ft²) filtration area

Pression:3.4 bar (49.7 psi)

Température:120°C (248°F)

Number of Filter Elements:15 horizontal plates + 1 scavenger

Veste:Oui

Jacket Type:Standard

Veste MOC :Acier inoxydable 304

Type de support :Vertical

Orientation:skid-mounted on casters

Schenk ZHF-SR10KL — 4.7 m²

Used Schenk stainless steel austenitic pressure leaf filter with 4.7 m² (50.6 ft²) filtration area and 11 kW (14.8 HP) motor.

Zone de filtration :4.7 m² (50.6 ft²) filtration area

Pression:6 bars (87 psi)

Température:150 °C (302 °F)

Puissance du moteur :11 kW (14.8 HP) motor

Veste:Oui

Jacket Type:Half Pipe/Limpet

Diamètre:805 mm (31.7 in) dia.

Type de support :on legs

Buy Used Rosenmund & Cogiem Filter Dryers for Sale

Rosenmund & Cogiem filter dryers combine filtration and drying in a single enclosed vessel, reducing product transfer and contamination risk. IPP stocks Rosenmund & Cogiem filter dryers from manufacturers including 3V Cogeim, Guedu, GL Filtrations, Rosenmund, and more. Available in stainless steel 316, 321, Hastelloy C-22, and austenitic grades.

3V Cogeim FiltoDry FEPXD 400 — 4.2 m²

Used 3V Cogeim Hastelloy C-22 filter dryer with 4.2 m² (44.7 ft²) filtration area, hydraulic agitator drive, CIP capability, and dust filter.

Zone de filtration :4.2 m² (44.7 ft²) filtration area

Pression:6.1 bar (88.5 psi)

Température:200 °C (392 °F)

Puissance du moteur :29,8 kW (40 CV)

Type de joint d'agitation :joint mécanique

Veste:Half pipe/limpet jacket

Jacket Type:SS 316

Diamètre:2,300 mm (90.6 in) dia.

Overall Height:CIP equipped

Guedu Filtre Pilote SS 316 — 0.37 m²

Used Guedu stainless steel 316 pilot-scale filter dryer with 0.37 m² (4 ft²) filtration area, 102.2 L (27 gal) vessel capacity, and mechanical seal agitation.

Zone de filtration :0.37 m² (4 ft²)

Vessel Liquid Capacity:102.2 L (27 gal)

Pression:3 bar (44 psi)

Température:165°C (329°F)

Puissance du moteur :2.2 kW (3 HP)

Type de joint d'agitation :joint mécanique

Veste:Oui

Jacket Type:Standard

Veste MOC :Acier inoxydable 316

Intenal Finish:Buff polish

Removable Bottom:removable bottom

GL Filtrations FD350 Hastelloy C-22 — 0.1 m²

Used GL Filtrations Hastelloy C-22 lab-scale filter dryer with 0.1 m² (1.08 ft²) filtration area, double mechanical seal, and vacuum capability.

Zone de filtration :0.1 m² (1.08 ft²) filtration area

Pression:6 bars (87 psi)

Température:160°C (320°F)

Vide:vacuum

Type de joint d'agitation :Double joint mécanique

Veste:Oui

Jacket Type:Standard

Veste MOC :Acier inoxydable 316L

Agitator Cored for Heating/Cooling:Cored agitator

Dust Filter:dust filter equipped

Buy Used Nutsche Filters for Sale

Nutsche filters provide batch solid-liquid separation in a single pressure or vacuum vessel, commonly used for pharmaceutical intermediates, APIs, and fine chemical applications. IPP stocks nutsche filters from manufacturers including Pfaudler, Seitz-Werke, JENS OLSEN, and Wollner & Platz. Available in stainless steel 316, austenitic stainless steel, and glass-lined construction.

Seitz-Werke 60/1 SS Austenitic — 0.3 m²

Used Seitz-Werke stainless steel austenitic nutsche filter with 0.3 m² (3.2 ft²) filtration area, 0.12 m³ (4.2 ft³) cake volume, and half pipe/limpet jacket.

Zone de filtration :0.3 m² (3.2 ft²)

Cake Volume:0.12 m³ cake vol.

Pression:6 bars (87 psi)

Température:143°C (289.4°F)

Veste:Half pipe/limpet jacket

Jacket Type:SS Austenitic

Top Head Type:Dish top (welded)

Type de tête inférieure :flat bottom (bolted)

Type de support :On legs

Support Details:steel base with casters

Pfaudler Glass-Lined Nutsche — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, elliptical heads, and high-temperature/high-pressure jacket.

Zone de filtration :0.52 m² (5.6 ft²) filtration area

Pression:3,4 bar (50 psi)

Température:232,2 °C (450 °F)

Pression de la veste :Jacket: 10.3 bar (150 psi)

Température de la veste :232.2°C

Top Head Type:Elliptical heads

Type de tête inférieure :glass-lined MOC

Diamètre:813 mm (32 in) dia.

Orientation:vertical

JENS OLSEN SS 316 — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum capability, and jacketed construction.

Zone de filtration :2.8 m² (29.6 ft²) filtration area

Pression:2 bars (29 psi)

Température:134°C (273.2°F)

Vide:vacuum

Veste:Oui

Pression de la veste :2 bars (29 psi)

Température de la veste :134 °C (273.2 °F)

Top Head Type:Dish top (welded)

Type de tête inférieure :dish bottom (bolted)

Diamètre:1,900 mm (74.8 in) dia.

Longueur du côté droit :1,000 mm (39.4 in) SSL

Need a Filter? Ask an IPP Expert.

Tell us your filtration area, material, pressure, and temperature requirements. Our team will match your specifications against current filter inventory and provide a detailed quote.

Comparing 3 Filter Types Available from IPP

IPP stocks three subtypes of industrial filters. Use the comparison below to identify the best filter type for your process requirements.

Feature	Pressure Leaf	Rosenmund & Cogiem	Nutsche
Stock Position	Position la plus profonde	Strong position	Available
Primary Function	Continuous enclosed filtration	Combined filtration & drying	Batch solid-liquid separation
Matériaux disponibles	SS 316, 316L, 304, 321, Austenitic	SS 316, 321, Hastelloy C-22	SS 316, Austenitic, Glass-lined
Filtration Area Range	0.28 – 80 m² (3 – 861 ft²)	0.03 – 6 m² (0.32 – 64.6 ft²)	0.3 – 6 m² (3.2 – 64.6 ft²)
Agitation	Select models with cake discharge	Standard — hydraulic or electric drive	Available on select units
Drying Capability	No	Yes — heated agitator & jacket	Via jacket heating only
Jacket Options	Half pipe/limpet & standard	Half pipe/limpet & standard	Half pipe/limpet & standard
Key Manufacturers	Sparkler, Schenk, Chemap, GPS	3V Cogeim, Guedu, GL Filtrations	Pfaudler, Seitz-Werke, JENS OLSEN

Buy Used Filters for Sale by Manufacturer

PP stocks filters from a wide range of OEM manufacturers, with Schenk, Sparkler, and Rosenmund representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, replacement parts, and operator familiarity.

Buy Used Schenk Filters for Sale

Schenk is the deepest single-manufacturer position in IPP’s filter inventory, spanning both pressure leaf filters and Rosenmund & Cogiem filter dryers. Available models include ZHF and ZPF series units in used condition.

Schenk ZHF-SR10KL — 4.7 m²

Used Schenk stainless steel austenitic pressure leaf filter with 4.7 m² (50.6 ft²) filtration area and 11 kW (14.8 HP) motor.

Matériel:Acier inoxydable austénitique

Zone de filtration :4.7 m² (50.6 ft²) filtration area

Pression:6 bars (87 psi)

Température:150 °C (302 °F)

Puissance du moteur :11 kW (14.8 HP) motor

Condition:État d'occasion

Schenk Pressure Leaf — 15 m²

Used Schenk stainless steel austenitic pressure leaf filter with 15 m² (161.5 ft²) filtration area for high-capacity continuous filtration.

Matériel:Acier inoxydable austénitique

Zone de filtration :15 m² (161.5 ft²) filtration area

Sous-type :Pressure leaf type

Condition:État d'occasion

Schenk Pressure Leaf — 28.8 m²

Used Schenk stainless steel 304 pressure leaf filter with 28.8 m² (310 ft²) filtration area for large-scale industrial operations.

Matériel:Acier inoxydable 304

Zone de filtration :28.8 m² (310 ft²) filtration area

Sous-type :Pressure leaf type

Condition:État d'occasion

Buy Used Sparkler Filters for Sale

Sparkler is one of the deepest OEM positions in IPP’s pressure leaf filter inventory. Available models include the D-series and other horizontal and vertical configurations.

Sparkler 18 D 12 SS 316 — 2 m²

Used Sparkler stainless steel 316 pressure leaf filter model 18 D 12 with 2 m² (22 ft²) filtration area.

Matériel:Acier inoxydable 316

Zone de filtration :2 m² (22 ft²) filtration area

Modèle:Model 18 D 12

Condition:État d'occasion

Sparkler SS 304 — 0.58 m²

Used Sparkler stainless steel 304 pressure leaf filter with 0.58 m² (6.2 ft²) filtration area for smaller-scale operations.

Matériel:Acier inoxydable 304

Zone de filtration :0.58 m² (6.2 ft²) filtration area

Condition:État d'occasion

Sparkler SS 304 — 1.02 m²

Used Sparkler stainless steel 304 pressure leaf filter with 1.02 m² (11 ft²) filtration area.

Matériel:Acier inoxydable 304

Zone de filtration :1.02 m² (11 ft²) filtration area

Condition:État d'occasion

Buy Used Rosenmund Filter Dryers for Sale

Rosenmund is one of the deepest OEM positions in IPP’s filter dryer inventory. Available in stainless steel 316 and Hastelloy C-22, with filtration areas from 0.25 m² to 8 m².

Rosenmund B88-RF-1513 SS 316 — 0.6 m²

Used Rosenmund stainless steel 316 filter dryer model B88-RF-1513 with 0.6 m² (6.5 ft²) filtration area and agitated vessel.

Matériel:Acier inoxydable 316

Zone de filtration :0.6 m² (6.5 ft²) filtration area

Modèle:Model B88-RF-1513

Agitation:Agitated, hydraulic drive

Condition:État d'occasion

Rosenmund AG Hastelloy C-22 — 0.25 m²

Used Rosenmund AG Hastelloy C-22 filter dryer with 0.25 m² (2.7 ft²) filtration area for corrosion-resistant pharmaceutical and fine chemical applications.

Matériel:Hastelloy C-22

Zone de filtration :0.25 m² (2.7 ft²) filtration area

Sous-type :Rosenmund filter dryer

Condition:État d'occasion

Rosenmund SS 316 — 8 m²

Used Rosenmund stainless steel 316 filter dryer with 8 m² (86.1 ft²) filtration area for production-scale combined filtration and drying.

Matériel:Acier inoxydable 316

Zone de filtration :8 m² (86.1 ft²) filtration area

Sous-type :Rosenmund filter dryer

Condition:État d'occasion

Buy Used Filters from Other OEM Manufacturers

Beyond Schenk, Sparkler, and Rosenmund, IPP stocks filters from 3V Cogeim, Chemap, Pfaudler, Artisan, BHS, Bertrams, Seitz, and many other OEM manufacturers.

3V Cogeim FEPXD 400 Hastelloy — 4.2 m²

Used 3V Cogeim Hastelloy C-22 filter dryer with 4.2 m² (44.7 ft²) filtration area, hydraulic agitator drive, CIP capability, and dust filter.

Matériel:Hastelloy C-22

Zone de filtration :4.2 m² (44.7 ft²) filtration area

Agitation:Agitated

CIP :CIP equipped

Condition:État d'occasion

Chemap SS 316 — 3 m²

Used Chemap stainless steel 316 pressure leaf filter with 3 m² (32.3 ft²) filtration area.

Matériel:Acier inoxydable 316

Zone de filtration :3 m² (32.3 ft²) filtration area

Sous-type :Pressure leaf type

Condition:État d'occasion

Pfaudler Glass-Lined Nutsche — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, elliptical heads, and high-temperature/high-pressure jacket.

Matériel:Construction à revêtement de verre

Zone de filtration :0.52 m² (5.6 ft²) filtration area

Veste:Jacketed for temperature control

Condition:État d'occasion

Buy Used Filters for Sale by Condition

IPP stocks filters in used, unused, and new condition grades. Choose the condition that matches your budget, timeline, and performance requirements.

Buy Used Filters for Sale

Good used filters are the deepest condition position in IPP’s inventory. These units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining OEM construction and engineering.

Used 3V Cogeim FEPXD 400 — 4.2 m²

Used 3V Cogeim Hastelloy C-22 filter dryer with 4.2 m² (44.7 ft²) filtration area, hydraulic agitator drive, CIP capability, and dust filter.

Condition:État d'occasion

Matériel:Hastelloy C-22

Zone de filtration :4.2 m² (44.7 ft²) filtration area

Pression:6.1 bar (88.5 psi)

Température:200 °C (392 °F)

CIP :CIP equipped

Dust Filter:dust filter

Used Schenk ZHF-SR10KL — 4.7 m²

Used Schenk stainless steel austenitic pressure leaf filter with 4.7 m² (50.6 ft²) filtration area and 11 kW (14.8 HP) motor.

Condition:État d'occasion

Matériel:Acier inoxydable austénitique

Zone de filtration :4.7 m² (50.6 ft²) filtration area

Puissance du moteur :11 kW (14.8 HP) motor

Pression:6 bars (87 psi)

Température:150 °C (302 °F)

Used Seitz-Werke 60/1 SS Austenitic — 0.3 m²

Used Seitz-Werke stainless steel austenitic nutsche filter with 0.3 m² (3.2 ft²) filtration area, 0.12 m³ cake volume, and half pipe/limpet jacket.

Condition:État d'occasion

Matériel:Acier inoxydable austénitique

Zone de filtration :0.3 m² (3.2 ft²) filtration area

Pression:6 bars (87 psi)

Température:143°C (289.4°F)

Veste:Half pipe/limpet jacket

Buy Unused Surplus Filters for Sale

Unused surplus filters were manufactured but never installed in production service. These units offer new-equipment performance and condition with immediate availability and pricing below new OEM cost.

Unused Chemieanlagebau SS 316 — 8 m²

Unused Chemieanlagebau Stassfurt stainless steel 316 pressure leaf filter with 8 m² (86.1 ft²) filtration area, 5.9 bar pressure rating, and 160°C temperature rating.

Condition:État inutilisé

Matériel:Acier inoxydable 316

Zone de filtration :8 m² (86.1 ft²) filtration area

Pression:5.9 bar (86 psi)

Température:160°C (320°F)

Unused Chemap A10 SS 304 — 10 m²

Unused Chemap stainless steel 304 pressure leaf filter model A10 with 10 m² (107.6 ft²) filtration area, 5 bar pressure rating.

Condition:État inutilisé

Matériel:Acier inoxydable 304

Zone de filtration :10 m² (107.6 ft²) filtration area

Pression:5 bars (72,5 psi)

Température:100°C (212°F)

Unused Chemap A18 SS 316L — 18 m²

Unused Chemap stainless steel 316L pressure leaf filter model A18 with 18 m² (193.8 ft²) filtration area, 5 bar pressure rating.

Condition:État inutilisé

Matériel:Acier inoxydable 316L

Zone de filtration :18 m² (193.8 ft²) filtration area

Pression:5 bars (72,5 psi)

Température:100°C (212°F)

Buy New Filters for Sale

IPP stocks new filters from its Gale Process Solutions (GPS) subsidiary. GPS provides custom fabricated equipment with 12–16 week average delivery.

Gale Process Solutions BPEFP — 2.4 m²

New Gale Process Solutions stainless steel 316 vertical pressure leaf filter with 2.4 m² (25. ft²) filtration area and 15 horizontal plates.

Condition:État neuf

Matériel:Acier inoxydable 316

Zone de filtration :2.4 m² (25.8 ft²) filtration area

Pression:3.4 bar (49.7 psi)

Température:120°C (248°F)

Number of Filter Elements:15 horizontal plates + 1 scavenger

Advantages of Buying Used Filters from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver industrial filters ready for your process.

Des économies de coûts importantes

Buying used filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. With filters across three subtypes, IPP offers a wide selection to match your budget and specifications.

Disponibilité immédiate

In-stock filters from IPP are ready to ship. New OEM filters require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Fabricants OEM multiples

IPP stocks filters from Sparkler, Schenk, 3V Cogeim, Pfaudler, Gale Process Solutions, Chemap, and many additional manufacturers. Every unit is an original OEM product with traceable provenance.

Three Filter Subtypes

IPP stocks pressure leaf filters for continuous fine filtration, Rosenmund & Cogiem filter dryers for combined filtration and drying, and nutsche filters for batch solid-liquid separation. Each subtype serves different process requirements and applications.

Présence mondiale dans 15 pays

IPP possède des bureaux dans 15 pays : Allemagne, Brésil, Canada, Chine, Espagne, États-Unis, France, Inde, Italie, Mexique, Pakistan, Portugal, République tchèque, Roumanie, Royaume-Uni et Turquie. IPP a servi plus de 160 000 clients dans le monde entier.

Gamme complète de matériaux et de spécifications

Materials include stainless steel 316, 316L, 304, Hastelloy C-22, and glass-lined. Filtration areas from 0.03 m² (0.32 ft²) to 80 m² (861 ft²). Pressure ratings from 2 bar (29 psi) to 27.6 bar (400 psi). Jacketed options available across all subtypes.

How Buying a Used Filter Works

The process of purchasing a used industrial filter from IPP follows five steps, from specification to delivery.

1

Soumettre les exigences

Share your filter specifications: filtration area, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.

2

Réception du paquet de données

IPP sends a detailed equipment data sheet with filtration area, pressure rating, temperature, dimensions, jacket specifications, and condition report with photographs.

3

Inspecter l'équipement

Contactez IPP pour organiser une visite sur site ou demandez une visite vidéo en direct du réacteur avec un membre de l'équipe IPP dans l'un de nos sites à travers le monde.

4

Options de rénovation

IPP offers refurbishment services including new filter media, gasket replacement, and surface reconditioning. Contact IPP for details on specific equipment.

5

Emballage et livraison

IPP prend en charge l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre usine. Expédition internationale depuis nos bureaux situés dans 15 pays. Contactez IPP pour plus d'informations sur la livraison.

Browse All Filter Types from IPP

IPP stocks industrial filters across three specialized subtypes. Click below to browse the full inventory for each filter type.

Rosenmund & Cogiem Filter Dryers

Pressure Leaf Filters

Filtres Nutsche

Industries qui achètent des centrifugeuses d'occasion

IPP fournit des centrifugeuses d'occasion à des fabricants et des transformateurs de nombreux secteurs d'activité dans le monde entier.

Traitement chimique

Pharmaceutique

Restauration

Environmental & Wastewater

Biotechnologie

Produits chimiques fins

produits agrochimiques

Produits de beauté

Produits pétrochimiques

Polymères et résines

Cosmétiques (applications de mélange de formulations en vrac ou de base sélectionnées)

Applications pharmaceutiques (non stériles, non conformes aux BPF ou portant sur des solides en vrac et des procédés intermédiaires)

Biotechnologie (applications limitées de traitement de matériaux auxiliaires non stériles et ne faisant pas appel à la culture cellulaire)

Frequently Asked Questions About Buying Used Filters

Answers to the most common questions from procurement and operations teams evaluating used industrial filters.

How many used filters does IPP have in stock?

IPP stocks industrial filters across three subtypes: pressure leaf filters, Rosenmund & Cogiem filter dryers, and nutsche filters. Manufacturers include Sparkler, Schenk, 3V Cogeim, Pfaudler, Gale Process Solutions, and more. Consultez l'inventaire IMS pour connaître la disponibilité actuelle.

What condition grades are available for used filters?

IPP stocks filters in multiple conditions: good used, unused surplus, and new. New filters include custom-built units from IPP's Gale Process Solutions subsidiary. Unused filters were manufactured but never installed, offering new-equipment performance with immediate availability.

What manufacturers of filters does IPP stock?

IPP stocks filters from a wide range of manufacturers including Sparkler, Schenk, 3V Cogeim, Pfaudler, Gale Process Solutions, Chemap, Alloy Fab, Durco, Guedu, GL Filtrations, Seitz-Werke, JENS OLSEN, Diessel Hildesheim, and others. Consultez l'inventaire actuel pour voir les fabricants disponibles.

Does IPP sell new filters as well as used?

Oui. IPP stocks new filters, primarily from its Gale Process Solutions (GPS) subsidiary. GPS fournit des équipements fabriqués sur mesure avec un délai de livraison moyen de 12 à 16 semaines. Contact IPP for details on new and unused inventory.

What is the difference between pressure leaf and nutsche filters?

Pressure leaf filters offer continuous, enclosed operation ideal for fine filtration with centrifugal or wet cake discharge. Nutsche filters operate as batch pressure or vacuum vessels for solid-liquid separation, commonly used for pharmaceutical intermediates and fine chemicals. IPP stocks both pressure leaf and nutsche filters.

What is a Rosenmund & Cogiem filter dryer?

Rosenmund & Cogiem filter dryers combine filtration and drying in a single enclosed, agitated vessel. They feature heated agitators and jackets that allow the product to be filtered, washed, and dried without transfer between equipment, reducing contamination risk and product loss. IPP stocks Rosenmund & Cogiem filter dryers from manufacturers including 3V Cogeim, Guedu, and GL Filtrations.

Are used filters suitable for pharmaceutical or food processing?

Yes — many are built to sanitary standards and can be revalidated or retrofitted with new filter media and gaskets. Select units feature sanitary-grade surface finishes including Ra 0.5 and buff polish.

What factors should I consider when selecting a filter?

Key factors include particle size, solids concentration, flow rate, operating pressure, temperature, and chemical compatibility. Additionally, consider whether you need combined drying capability (Rosenmund & Cogiem), continuous operation (pressure leaf), or batch vacuum filtration (nutsche). Contact IPP to discuss your specific process requirements.

What filtration area range is available?

IPP stocks filters with filtration areas from 0.03 m² (0.32 ft²) for laboratory-scale applications up to 80 m² (861 ft²) for large production operations. Pressure leaf filters offer the largest filtration areas, while Rosenmund & Cogiem and nutsche filters are available in smaller to mid-range sizes. Contact IPP with your filtration area requirements.

Quels matériaux de construction sont disponibles ?

IPP stocks filters in stainless steel 316, 316L, 304, 321, and austenitic grades, Hastelloy C-22 and C-276, and glass-lined construction. Stainless steel serves sanitary, pharmaceutical, and food-grade use. Hastelloy serves aggressive media or high-purity applications. Glass-lined provides corrosion resistance for reactive chemicals.

What pressure and temperature ratings are available?

Internal pressure ratings across IPP's filter inventory range from 2 bar (29 psi) to 27.6 bar (400 psi). Temperature ratings range from 20°C (68°F) to 315.6°C (600°F). Vacuum-capable units are available across all three filter subtypes. Contact IPP with your process pressure and temperature requirements.

Do IPP filters come with jackets for temperature control?

Yes. A majority of filters in IPP's inventory feature jackets for temperature-controlled filtration. Jacket types include half pipe/limpet and standard jackets. Jacket materials of construction include stainless steel 316, 316L, 304, and carbon steel. Rosenmund & Cogiem filter dryers additionally feature cored agitators for heating and cooling.

How much can I save buying a used filter versus new?

Buying used filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on filter type, manufacturer, filtration area, material of construction, and condition. IPP provides detailed quotes with full specification matching on request.

How long does it take to receive a used filter from IPP?

In-stock filters are ready to ship. La filiale GPS d'IPP fournit de nouveaux équipements fabriqués sur mesure avec un délai de livraison moyen de 12 à 16 semaines. IPP expédie ses produits depuis des bureaux situés dans 15 pays à travers le monde. Contactez IPP pour connaître les délais de livraison spécifiques des unités qui vous intéressent.

Can I visit IPP to inspect a filter before buying?

Contactez IPP pour organiser une visite ou discuter des options d'inspection pour un équipement spécifique. IPP possède des bureaux dans 15 pays : Brésil, Canada, Chine, République tchèque, France, Allemagne, Inde, Italie, Mexique, Pakistan, Portugal, Roumanie, Turquie, Royaume-Uni et États-Unis.

Does IPP handle shipping and freight for filters?

IPP coordonne l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Avec des bureaux dans 15 pays et Plus de 160 000 clients servis dans le monde entier, IPP possède une vaste expérience en matière de logistique d'équipements à l'échelle mondiale. Contactez IPP pour discuter des solutions d'expédition et de logistique pour des équipements spécifiques.

What are the benefits of buying used process equipment from IPP?

IPP offers significant savings, reduced lead times, and global support based on more than 47 years of equipment expertise. IPP maintains an inventory of 15,000 process systems and major equipment pieces à travers 20 global plant sites.

Ready to Buy a Used Filter?

Depuis 1980, IPP fournit des équipements de process de qualité dans le monde entier et compte plus de 160 000 clients. Faites-nous part de vos besoins : notre équipe vous proposera les produits et les prix adaptés.