Buy Used Holoflite & Screw Dryers for Sale

Buying used holoflite and screw dryers through International Process Plants gives chemical processing, wastewater treatment, mining, and pharmaceutical buyers access to indirect-heat dryers that use screws to convey and thermally process bulk solids in a single enclosed trough from Joy Denver, Svedala, Hi Line Industries, Reitz, Denver Equipment, Thies Kg Coesfeld Gmbh, and other OEM manufacturers. ▶

Materials of construction include Carbon Steel, Stainless Steel 316, Stainless Steel 304, and Stainless Steel 316L. Internal pressure ratings range from 0.005 bar (0.07 psi) on IPP# 208223 to 5.5 bar (80 psi) on IPP# 222018. Heat transfer surface areas span from 7.2 m² (78 ft²) on IPP# 91126 to 141.1 m² (1,500 ft²) on IPP# 232604. Screw configurations range from single-screw units through twin-screw and quad-screw designs.

IPP stocks Joy Denver units in the D-2420-6 and D12-20-5 model families. Svedala inventory includes the Q2424-6 quad-screw processor series. All units are in used condition. Buying used holoflite and screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

10+

Holoflite & Screw Dryers in Stock

1980

Establecido desde

15

Países con oficinas

Joy Denver D-2420-6 Carbon Steel

Used — 53 m² heat transfer area

Denver Equipment Stainless Steel 316L

Used — 19 m² heat transfer area

Svedala Q2424-6 Carbon Steel

Used — 141.1 m² heat transfer area

Buy Used Holoflite & Screw Dryers by Material

IPP stocks holoflite and screw dryers in carbon steel and multiple stainless steel grades. The material of construction determines corrosion resistance, maximum operating temperature, and compatibility with the product being dried.

Buy Used Carbon Steel Holoflite & Screw Dryers for Sale

Carbon steel is the deepest material position in IPP’s holoflite and screw dryer inventory. Available from Joy Denver and Svedala, these units suit general industrial drying where elevated corrosion resistance is not required.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Material:Acero carbono

Superficie de transferencia de calor:53 m² (571 ft²) heat transfer area

Presión interna:5.5 bar (80 psi)

Temperatura interna:343,3 °C (650 °F)

Número de tornillos:Four-screw configuration

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and hot-oil heating medium.

Material:Acero carbono

Superficie de transferencia de calor:141.1 m² (1,500 ft²) heat transfer area

Presión interna:2,1 bar (30 psi)

Temperatura interna:343,3 °C (650 °F)

Número de tornillos:Four-screw configuration

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area.

Superficie de transferencia de calor:11.9 m² (128 ft²) heat transfer area

Presión de la camisa:2,1 bar (30 psi)

Temperatura de la chaqueta:343,3 °C (650 °F)

Número de tornillos:Single-screw configuration

Condición:Estado usado

Buy Used Stainless Steel Holoflite & Screw Dryers for Sale

IPP stocks stainless steel holoflite and screw dryers in 316, 304, and 316L grades. Available from Denver Equipment, Thies Kg Coesfeld Gmbh, Hi Line Industries, and Reitz for corrosion-sensitive or sanitary drying applications.

Denver Equipment D-12-18-5 — 19 m²

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Material:Acero inoxidable 316L

Superficie de transferencia de calor:19 m² (204 ft²) heat transfer area

Presión interna:2,1 bar (30 psi)

Temperatura interna:343,3 °C (650 °F)

Número de tornillos:Twin-screw configuration

Product Rate:907 kg/h (2,000 lb/h) product rate

Thies Kg Coesfeld Gmbh 2 V 410-24 — SS 316

Used Thies Kg Coesfeld Gmbh 2 V 410-24 stainless steel 316 holoflite and screw dryer with twin-screw design rated for 50 °C (122 °F) internal temperature.

Material:Acero inoxidable 316

Temperatura interna:50 °C (122 °F) internal temperature

Presión de la camisa:Presión de la camisa: 6 bar (87 psi)

Número de tornillos:Twin-screw configuration

Ancho:700 mm (27.6 in) W

Longitud:3,750 mm (147.6 in) L

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Material:Acero inoxidable 304

Longitud:3,050 mm (120 in) length

Presión de la camisa:0.34 bar (5 psi) jacket pressure

Número de tornillos:Single-screw configuration

Condición:Estado usado

Buy Used Holoflite & Screw Dryers for Sale by Manufacturer

IPP stocks holoflite and screw dryers from six OEM manufacturers, with Joy Denver and Svedala representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Joy Denver Holoflite & Screw Dryers for Sale

Joy Denver is the deepest single-manufacturer position in IPP’s holoflite and screw dryer inventory. Available models include the D-2420-6 quad-screw processor and the D12-20-5 single-screw unit, all in carbon steel construction.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area, rated for 5.5 bar (80 psi) at 343.3 °C (650 °F).

Material:Acero carbono

Superficie de transferencia de calor:53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Número de tornillos:Four-screw configuration

Condición:Estado usado

Joy Denver D-2420-6 — IPP# 222019

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Material:Acero carbono

Superficie de transferencia de calor:53 m² (571 ft²) heat transfer area

Presión interna:5.5 bar (80 psi)

Temperatura interna:343,3 °C (650 °F)

Número de tornillos:Four-screw configuration

Condición:Estado usado

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area and 2.1 bar (30 psi) jacket pressure.

Superficie de transferencia de calor:11.9 m² (128 ft²) heat transfer area

Presión de la camisa:2,1 bar (30 psi)

Temperatura de la chaqueta:343,3 °C (650 °F)

Número de tornillos:Single-screw configuration

Longitud:6,100 mm (240 in) length

Condición:Estado usado

Buy Used Svedala Holoflite & Screw Dryers for Sale

Svedala is the second deepest OEM position in IPP’s holoflite and screw dryer inventory. Available units include the Q2424-6 quad-screw processor series in carbon steel construction with hot-oil heating medium.

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Material:Acero carbono

Superficie de transferencia de calor:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Número de tornillos:Four-screw configuration

Condición:Estado usado

Svedala Q2424-6 — IPP# 232605

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Material:Acero carbono

Superficie de transferencia de calor:141.1 m² (1,500 ft²) heat transfer area

Presión interna:2,1 bar (30 psi)

Temperatura interna:343,3 °C (650 °F)

Número de tornillos:Four-screw configuration

Condición:Estado usado

Svedala — 141.1 m² IPP# 232603

Used Svedala carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Material:Acero carbono

Superficie de transferencia de calor:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Número de tornillos:Four-screw configuration

Condición:Estado usado

Buy Used Holoflite & Screw Dryers from Other Manufacturers

Beyond Joy Denver and Svedala, IPP stocks holoflite and screw dryers from Hi Line Industries, Reitz, Denver Equipment, and Thies Kg Coesfeld Gmbh. These units span stainless steel grades for corrosion-sensitive and sanitary drying duties.

Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Material:Acero inoxidable 316L

Superficie de transferencia de calor:19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Número de tornillos:Twin-screw configuration

Condición:Estado usado

Hi Line Industries 2155M25 — SS 316

Used Hi Line Industries 2155M25 stainless steel 316 holoflite and screw dryer with single-screw configuration rated for 1.03 bar (14.9 psi) at 148.9 °C (300 °F).

Material:Acero inoxidable 316

Presión interna:1.03 bar (14.9 psi)

Temperatura interna:148,9 °C (300 °F)

Longitud:4,100 mm (162 in) length

Número de tornillos:Single-screw configuration

Condición:Estado usado

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Material:Acero inoxidable 304

Longitud:3,050 mm (120 in) length

Presión de la camisa:0.34 bar (5 psi) jacket pressure

Número de tornillos:Single-screw configuration

Condición:Estado usado

Buy Used Holoflite & Screw Dryers for Sale by Condition

All holoflite and screw dryers currently in IPP’s inventory are in used condition. Used units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining original OEM screw and drive hardware.

Buy Used Holoflite & Screw Dryers for Sale

All holoflite and screw dryers in IPP’s current inventory are in good used condition. These units were previously installed in production service and retain their original OEM hollow-flight screws, trough bodies, drive assemblies, and heating jackets.

Used Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Condición:Estado usado

Material:Acero carbono

Superficie de transferencia de calor:53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Número de tornillos:Four-screw configuration

Used Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Condición:Estado usado

Material:Acero inoxidable 316L

Superficie de transferencia de calor:19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Número de tornillos:Twin-screw configuration

Used Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Condición:Estado usado

Material:Acero carbono

Superficie de transferencia de calor:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Número de tornillos:Four-screw configuration

Ready to Buy a Used Holoflite & Screw Dryer?

Tell us your specifications and requirements. Our team will match your needs against current holoflite and screw dryer inventory and provide a detailed quote.

Buying Used Holoflite & Screw Dryers vs Buying New

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new holoflite & screw dryers compare across key factors.

Factor	Utilizado desde IPP	Nuevo (OEM)
Costo del equipo	Ahorro significativo en comparación con el precio de un producto nuevo del fabricante.	Precio de lista completo del fabricante
Cronograma de entrega	Unidades en stock listas para enviar	Plazos de entrega prolongados (nueva fabricación)
Materiales	Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L	Especificado a medida
Clasificación de presión	0.005 bar (0.07 psi) to 5.5 bar (80 psi)	Fabricado a medida según las especificaciones.
Fabricantes	Joy Denver, Svedala, Hi Line Industries and others	Fabricante de equipos originales único
Impacto ambiental	Prolonga la vida útil de los equipos y reduce los residuos.	Consumo de nuevas materias primas

Advantages of Buying Used Holoflite & Screw Dryers from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver holoflite & screw dryers ready for your process.

Ahorro de costes significativo

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilidad inmediata

In-stock holoflite & screw dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom-manufactured new equipment with 12–16 week average delivery.

Múltiples fabricantes de equipos originales (OEM)

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz and other manufacturers. Every unit is an original OEM product with traceable provenance.

Calidad y Remodelación

IPP ofrece servicios de reacondicionamiento a través de su división UGE (Universal Glasteel Equipment), fundada en 1995, que cuenta con un stock de más de 700 recipientes y más de 2700 piezas.

Presencia global en 15 países.

IPP cuenta con oficinas en 15 países: Brasil, Canadá, China, República Checa, Francia, Alemania, India, Italia, México, Pakistán, Portugal, Rumania, Turquía, Reino Unido y Estados Unidos. IPP ha prestado servicios a más de 160 000 clientes en todo el mundo.

Amplia gama de materiales y especificaciones.

IPP stocks holoflite & screw dryers across a wide range of specifications to match your process requirements.

How Buying a Used Holoflite & Screw Dryer Works

The process of purchasing used holoflite & screw dryers from IPP follows five steps, from specification to delivery.

1

Enviar requisitos

Comparta sus especificaciones: capacidad, material de construcción, presión nominal, temperatura y aplicación. O explore nuestro catálogo con función de búsqueda.

2

Recibir paquete de datos

IPP envía una ficha técnica detallada del equipo con especificaciones, dimensiones, informe de estado y fotografías.

3

Inspeccione el equipo.

Póngase en contacto con IPP para concertar una visita in situ o solicitar un recorrido virtual en directo con un especialista de IPP en una de nuestras sedes internacionales.

4

Opciones de renovación

IPP ofrece servicios de reacondicionamiento a través de su división UGE (más de 700 buques, más de 2700 piezas en stock). Póngase en contacto con IPP para obtener más información sobre servicios adicionales.

5

Embalaje y entrega

IPP coordina el embalaje, el empaquetado, el transporte y la entrega en su planta. Envíos internacionales desde oficinas en 15 países.

Industries That Buy Used Holoflite & Screw Dryers

IPP supplies used holoflite & screw dryers to manufacturers across multiple process industries worldwide.

Farmacéutico

Procesamiento químico

Alimentos y bebidas

Biotecnología

Agroquímicos

Productos químicos finos

Minería y minerales

Productos cosméticos

Pinturas y recubrimientos

Petroquímicos

Frequently Asked Questions About Buying Used Holoflite & Screw Dryers

Answers to the most common questions from procurement and operations teams evaluating used holoflite and screw dryers.

How many holoflite & screw dryers does IPP have in stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Disponible en acero inoxidable 304, acero inoxidable 316, acero al carbono y acero inoxidable 316L. Consulte el catálogo de IMS para conocer la disponibilidad actual.

What condition grades are available for used holoflite & screw dryers?

IPP stocks holoflite & screw dryers in multiple conditions: Used. Consulte el inventario actual para ver las opciones de estado disponibles.

Does IPP sell new holoflite & screw dryers as well as used?

Sí. IPP stocks new holoflite & screw dryers through its Gale Process Solutions (GPS) subsidiary, which provides custom-manufactured equipment with 12–16 week average delivery. Póngase en contacto con IPP para obtener más información sobre el nuevo inventario.

¿Qué materiales de construcción están disponibles?

IPP stocks holoflite & screw dryers in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Póngase en contacto con IPP para hablar sobre los requisitos de materiales para su aplicación.

What manufacturers of holoflite & screw dryers does IPP stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Consulte el inventario actual para ver los fabricantes disponibles.

How much can I save buying used holoflite & screw dryers versus new?

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. El ahorro exacto depende del fabricante, la capacidad, el material de construcción y el estado del equipo. Para conocer los precios de unidades específicas, póngase en contacto con IPP.

How long does it take to receive holoflite & screw dryers from IPP?

In-stock holoflite & screw dryers are ready to ship. IPP's GPS subsidiary provides new custom-manufactured equipment with 12–16 week average delivery. IPP realiza envíos desde oficinas en 15 países de todo el mundo.

¿IPP se encarga del envío y el transporte de mercancías?

IPP coordina el embalaje, el empaquetado, el transporte y la entrega en su planta. Con oficinas en 15 países. y Más de 160.000 clientes atendidos en todo el mundo., IPP cuenta con una amplia experiencia en logística global de equipos.

Otras piezas y equipos de IPP

In addition to holoflite & screw dryers, IPP stocks equipment across multiple categories for complete process solutions.

Filtros

Centrífugas

Intercambiadores de calor

Looking for New Holoflite & Screw Dryers?

IPP Group suministra equipos nuevos a través de su filial Gale Process Solutions (GPS), que ofrece equipos a medida con un plazo de entrega promedio de 12 a 16 semanas. IPP también ofrece equipos reacondicionados mediante su división UGE (Universal Glasteel Equipment).

Ready to Buy Holoflite & Screw Dryers?

Desde 1980, IPP suministra equipos de proceso de alta calidad a nivel mundial, atendiendo a más de 160 000 clientes. Díganos qué necesita: nuestro equipo le ofrecerá el inventario y los precios que mejor se ajusten a sus necesidades.