Buy Used Shell and Tube Heat Exchangers for Sale

Buying used shell and tube heat exchangers through International Process Plants gives chemical manufacturing, pharmaceutical and food processing, oil and gas refining, and HVAC and utility operations access to tube bundles enclosed inside a cylindrical shell, where one process stream travels inside the tubes while a second stream flows across them on the shell side. Manufacturers include VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International, and Graham among other OEMs. ▶

Heat transfer surface area in stock spans roughly 0.37 m² (4 ft²) on IPP# 221143 up to 1,050 m² (11,250 ft²) on IPP# 230449. Tube materials in inventory cover Stainless Steel 316, Stainless Steel 304, Stainless Steel Austenitic, Stainless Steel 321, Graphite, Carbon Steel, Tantalum, Titanium, and Hastelloy alloys. Shell construction is dominated by Carbon Steel, with Stainless Steel 316 and 304, Stainless Steel Austenitic, Stainless Steel 321, and Glasslined options also represented. Shell-side and tube-side ratings reach as high as 179.3 bar (2,600 psi) on units such as IPP# 212821. Bundle counts range from a single tube on IPP# 211622 up to 2,819 tubes on IPP# 212739, with bundle lengths reaching 18,000 mm (709 in) on IPP# 222336.

IPP carries BEM, AEU, AKU, CFT, FTA, and DEU model designations across multiple OEMs. Horizontal, vertical, and inclined orientations are all stocked, with horizontal mountings being the most common. Many units are rated for vacuum service on the shell or tube side. Condition options run from used through refurbished, unused, and brand new stock. Typical service duties include process heating and cooling, vapor condensing, and energy recovery loops. Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Filters in Stock

1980

تأسست منذ

15

الدول التي لديها مكاتب

Sices S.p.A Stainless Steel 316L

مستخدم

Albach Cembell Hastelloy - Other

مستخدم

Perry Products Co. Stainless Steel 304

مستخدم

Buy Used Shell and Tube Heat Exchangers by Material

IPP stocks shell and tube heat exchangers across stainless steel, graphite, carbon steel, and specialty alloy options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Shell and Tube Heat Exchangers for Sale

IPP stocks stainless steel shell and tube heat exchangers in 316, 316L, 304, 321, and Austenitic grades. Available from Sices S.p.A, Perry Products Co., AEL Apparatebau GmbH, Graham, Doyle and Roth, and other manufacturers.

Sices S.p.A BEM/1000 x 2700 — 150 m²

Used Sices S.p.A BEM/1000 x 2700 shell and tube heat exchanger with 150 m² (1,600 ft²) of heat transfer surface area and a 762-tube bundle.

Heat Transfer Surface Area:150 m² (1,600 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Tube Number:762 tubes

طول الأنبوب:2,700 mm (106.3 in) length

ضغط الأنبوب:20 bar (290 psi) tube side

الشركة المصنعة:Sices S.p.A BEM/1000

نموذج:2700

Perry Products Co. AEU — 105 m²

New Perry Products Co. AEU shell and tube heat exchanger built in Stainless Steel 304 with 105.1 m² (1,150 ft²) of heat transfer surface area.

Heat Transfer Surface Area:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Tube Number:197 tubes

طول الأنبوب:4,250 mm (167.3 in) length

ضغط الأنبوب:75.6 bar (1,100 psi) tube side

حالة:حالة جديدة

AEL Apparatebau BEM — 221 m²

Used AEL Apparatebau GmbH BEM shell and tube heat exchanger built in Stainless Steel 904L with 221 m² (2,400 ft²) of heat transfer surface area.

Heat Transfer Surface Area:221 m² (2,400 ft²) surface area

Tube Material:Stainless Steel 904L tubes

Tube Number:574 tubes

طول الأنبوب:5,000 mm (196.9 in) length

ضغط الأنبوب:6 bar (87 psi) tube side

الشركة المصنعة:AEL Apparatebau GmbH

نموذج:BEM

Buy Used Graphite Shell and Tube Heat Exchangers for Sale

IPP stocks graphite shell and tube heat exchangers. Available from VICARB, Sigri, Graphite Apparatebau and other manufacturers.

Carbone of America Corp. Graphite

Unused Carbone of America Corp. Graphite heat exchanger.

مادة:Graphite

حالة:حالة غير مستخدمة

الشركة المصنعة:Carbone of America Corp.

نموذج:PYT44-283-18

SGL Carbon Graphite

Used SGL Carbon Graphite heat exchanger.

مادة:Graphite

حالة:حالة مستعملة

الشركة المصنعة:SGL Carbon

نموذج:RS77-1-595.601

Buy Used Carbon Steel Shell and Tube Heat Exchangers for Sale

IPP stocks carbon steel shell and tube heat exchangers. Available from Delta Tee International Inc., Johnson Hunt LTD, Graham and other manufacturers.

Atlas Industrial Carbon Steel

Used Atlas Industrial Carbon Steel heat exchanger.

مادة:الفولاذ الكربوني

حالة:حالة مستعملة

Western Supply Carbon Steel

Used Western Supply Carbon Steel heat exchanger.

مادة:الفولاذ الكربوني

حالة:حالة مستعملة

الشركة المصنعة:Western Supply

نموذج:BEM

Buy Used Other Shell and Tube Heat Exchangers for Sale

IPP stocks other shell and tube heat exchangers. Available from DeDietrich, , Tranter-Superchanger and other manufacturers.

Albach Cembell Hastelloy - Other

Used Albach Cembell Hastelloy – Other heat exchanger.

مادة:Hastelloy – Other

حالة:حالة مستعملة

الشركة المصنعة:Albach Cembell

نموذج:29-129 BEM

Atlas Industrial Hastelloy - Other

Used Atlas Industrial Hastelloy – Other heat exchanger.

مادة:Hastelloy – Other

حالة:حالة مستعملة

الشركة المصنعة:Atlas Industrial

نموذج:BEM 20-60

Buy Used Shell and Tube Heat Exchangers by Manufacturer

IPP stocks shell and tube heat exchangers from a wide range of manufacturers, with VICARB and Doyle and Roth representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts availability.

Buy Used VICARB Shell and Tube Heat Exchangers for Sale

VICARB is the deepest single-manufacturer position in IPP’s shell and tube heat exchanger inventory. Available VICARB models include FTA 20 and FTA20/24/26 series units, primarily in graphite construction for corrosion-resistant heat transfer applications.

VICARB FTA 20 Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

Shell Material:Carbon steel shell

حالة:حالة مستعملة

VICARB FTA20/24/26 Graphite — 12.1 m²

Used VICARB FTA20/24/26 graphite shell and tube heat exchanger with 12.1 m² (130 ft²) of heat transfer surface area.

Heat Transfer Surface Area:12.1 m² (130 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

حالة:حالة مستعملة

VICARB Graphite — 23.3 m²

Used VICARB graphite shell and tube heat exchanger with 23.3 m² (250.8 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:23.3 m² (250.8 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:6 bar (87 psi) shell side

Shell Material:Carbon steel shell

حالة:حالة مستعملة

Buy Used Doyle and Roth Shell and Tube Heat Exchangers for Sale

Doyle and Roth is the second deepest OEM position in IPP’s shell and tube heat exchanger inventory. Available in stainless steel 304 and Inconel construction for demanding process environments.

Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

Shell Material:Stainless Steel 316 shell

حالة:حالة مستعملة

Doyle and Roth Inconel — 8.6 m²

Used Doyle and Roth Inconel shell and tube heat exchanger with 8.6 m² (93 ft²) of heat transfer surface area for high-temperature corrosion-resistant service.

Heat Transfer Surface Area:8.6 m² (93 ft²) surface area

Tube Material:Inconel tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

حالة:حالة مستعملة

Doyle and Roth SS 304 — 68.1 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 68.1 m² (733 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:68.1 m² (733 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:10.3 bar (150 psi) shell side

Shell Material:Carbon steel shell

حالة:حالة مستعملة

Buy Used Shell and Tube Heat Exchangers from Other Manufacturers

Beyond VICARB and Doyle and Roth, IPP stocks shell and tube heat exchangers from Atlas Industrial, Delta Tee International Inc., Graham, Meccanica Sardia, Pfaudler, Johnson Hunt LTD, Manning & Lewis, and other manufacturers. These units span the full range of materials, surface areas, and pressure ratings.

Exchangeurs De Chaleur S.A.G. SS 304 — 16.8 m²

Used Exchangeurs De Chaleur S.A.G. stainless steel 304 shell and tube heat exchanger with 16.8 m² (180.8 ft²) of heat transfer surface area in vertical orientation.

Heat Transfer Surface Area:16.8 m² (180.8 ft²) surface area

Shell Material:Stainless Steel 304 shell

Shell Pressure:6 bar (87 psi) shell side

Tube Number:56 tubes

طول الأنبوب:1,850 mm (72.8 in) length

حالة:حالة مستعملة

Johnson Hunt LTD BEU Carbon Steel — 6.4 m²

Unused Johnson Hunt LTD BEU carbon steel shell and tube heat exchanger with 6.4 m² (69 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:6.4 m² (69 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:44 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

حالة:حالة غير مستخدمة

Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:83.8 m² (902 ft²) surface area

مادة:مصنوع من الفولاذ المقاوم للصدأ

توجيه:الوضع الأفقي

الشركة المصنعة:Graham manufacturer

حالة:حالة مستعملة

Buy Used Shell and Tube Heat Exchangers by Condition

IPP stocks shell and tube heat exchangers in multiple condition grades, including used, unused, refurbished/rebuilt, and new. Choose the condition that matches your budget and performance requirements.

Buy Used Shell and Tube Heat Exchangers for Sale

Used shell and tube heat exchangers represent the largest condition category in IPP’s inventory. Available from VICARB, Doyle and Roth, Graham, Atlas Industrial, and other manufacturers in stainless steel, graphite, carbon steel, and specialty alloy construction. Used condition offers the lowest price point while providing OEM-quality vessels.

Used VICARB Graphite — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Heat Transfer Surface Area:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

الشركة المصنعة:VICARB

نموذج:FTA 20

حالة:حالة مستعملة

Used Doyle and Roth SS 304 — 10.4 m²

Used Doyle and Roth stainless steel 304 shell and tube heat exchanger with 10.4 m² (112 ft²) of heat transfer surface area.

Heat Transfer Surface Area:10.4 m² (112 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:3.4 bar (50 psi) shell side

الشركة المصنعة:Doyle and Roth

حالة:حالة مستعملة

Used Graham SS — 83.8 m²

Used Graham stainless steel shell and tube heat exchanger with 83.8 m² (902 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:83.8 m² (902 ft²) surface area

مادة:مصنوع من الفولاذ المقاوم للصدأ

توجيه:الوضع الأفقي

الشركة المصنعة:Graham manufacturer

حالة:حالة مستعملة

Buy Unused Shell and Tube Heat Exchangers for Sale

IPP stocks unused shell and tube heat exchangers — units that were manufactured but never placed into service. Johnson Hunt LTD is the most frequently available manufacturer for unused shell and tube heat exchangers in IPP’s inventory. Unused condition provides factory-new performance at reduced lead time compared to ordering new.

Unused Johnson Hunt LTD BEU — 6.4 m²

Used VICARB FTA 20 graphite shell and tube heat exchanger with 6.4 m² (68.9 ft²) of heat transfer surface area.

Heat Transfer Surface Area:6.4 m² (68.9 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:4 bar (58 psi) shell side

الشركة المصنعة:VICARB

نموذج:FTA 20

حالة:حالة مستعملة

Unused Johnson Hunt LTD AEM — 1.58 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.58 m² (17 ft²) of heat transfer surface area.

Heat Transfer Surface Area:1.58 m² (17 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:26 bar (377 psi) shell side

Tube Number:11 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

حالة:حالة غير مستخدمة

Unused Johnson Hunt LTD AEM — 1.95 m²

Unused Johnson Hunt LTD AEM carbon steel shell and tube heat exchanger with 1.95 m² (21 ft²) of heat transfer surface area and horizontal orientation.

Heat Transfer Surface Area:1.95 m² (21 ft²) surface area

Shell Material:Carbon steel shell

Shell Pressure:9 bar (131 psi) shell side

Tube Number:14 tubes

Tube Diameter:19.1 mm (0.8 in) diameter

حالة:حالة غير مستخدمة

Buy Refurbished/Rebuilt Shell and Tube Heat Exchangers for Sale

IPP stocks refurbished and rebuilt shell and tube heat exchangers that have been professionally restored to operational condition. Available from Manning & Lewis, Allegheny Bradford Corp., Le-Carbone Lorraine, and other manufacturers. Refurbished units provide restored performance with documented rebuild history.

Manning & Lewis SS 316 — 65.6 m²

Refurbished/rebuilt Manning & Lewis stainless steel 316 shell and tube heat exchanger with 65.6 m² (706 ft²) of heat transfer surface area.

Heat Transfer Surface Area:65.6 m² (706 ft²) surface area

Shell Material:الفولاذ المقاوم للصدأ 316

Tube Material:الفولاذ المقاوم للصدأ 316

Shell Pressure:10.3 bar (150 psi) shell side

توجيه:الوضع الأفقي

حالة:حالة مجددة/معاد بناؤها

Allegheny Bradford SS 316L — 1.02 m²

Refurbished/rebuilt Allegheny Bradford Corp. stainless steel 316L shell and tube heat exchanger with 1.02 m² (11 ft²) of heat transfer surface area.

Heat Transfer Surface Area:1.02 m² (11 ft²) surface area

Shell Material:Stainless Steel 304L shell

Shell Pressure:10.3 bar (150 psi) shell side

Tube Material:Stainless Steel 316L tubes

حالة:حالة مجددة/معاد بناؤها

Le-Carbone Lorraine GM/8 Graphite — 2 m²

Refurbished/rebuilt Le-Carbone Lorraine GM/8 graphite shell and tube heat exchanger with 2 m² (21.5 ft²) of heat transfer surface area.

Heat Transfer Surface Area:2 m² (21.5 ft²) surface area

Tube Material:Graphite tubes

Shell Pressure:9 bar (130 psi) shell side

Shell Material:Carbon steel shell

حالة:حالة مجددة/معاد بناؤها

Buy New Shell and Tube Heat Exchangers for Sale

IPP stocks a select number of new shell and tube heat exchangers for applications requiring factory-new equipment. Available from Timmerman and Perry Products Co. in stainless steel construction.

New Timmerman SS 316L — 197.4 m²

New Timmerman stainless steel 316L shell and tube heat exchanger with 197.4 m² (2,100 ft²) of heat transfer surface area and vertical orientation.

Heat Transfer Surface Area:197.4 m² (2,100 ft²) surface area

Tube Material:Stainless Steel 316 tubes

Shell Pressure:12 bar (174 psi) shell side

Shell Material:Stainless Steel 316 shell

حالة:حالة جديدة

New Perry Products Co. AEU SS 304 — 105.1 m²

New Perry Products Co. AEU stainless steel 304 shell and tube heat exchanger with 105.1 m² (1,150 ft²) of heat transfer surface area.

Heat Transfer Surface Area:105.1 m² (1,150 ft²) surface area

Tube Material:Stainless Steel 304 tubes

Shell Pressure:15.7 bar (228 psi) shell side

Shell Material:Carbon steel shell

حالة:حالة جديدة

Ready to Buy a Used Shell and Tube Heat Exchanger?

Tell us your specifications and requirements. Our team will match your needs against current shell and tube heat exchangers inventory and provide a detailed quote.

Buying Used Shell and Tube Heat Exchangers vs Buying New

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new shell and tube heat exchangers compare across key factors.

عامل	مقتبس من IPP	جديد (من الشركة المصنعة الأصلية)
تكلفة المعدات	توفير كبير مقارنة بسعر الشركة المصنعة الأصلية الجديدة	قائمة أسعار الشركة المصنعة الأصلية الكاملة
الجدول الزمني للتسليم	وحدات متوفرة في المخزون وجاهزة للشحن	فترات انتظار أطول (تصنيع جديد)
مواد	Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic	مواصفات مخصصة
المصنعين	VICARB, Doyle and Roth, Atlas Industrial and others	مصنّع أصلي واحد
الأثر البيئي	يطيل عمر المعدات، ويقلل من النفايات	استهلاك المواد الخام الجديدة

Advantages of Buying Used Shell and Tube Heat Exchangers from IPP

تجمع شركة International Process Plants بين أكثر من 46 عامًا من الخبرة في مجال معدات المعالجة، وما يقرب من 150 زميلًا في 15 دولة، ومخزون من 15000 نظام معالجة وقطعة معدات رئيسية لتقديم مفاعلات جاهزة لعمليتك.

توفير كبير في التكاليف

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

التوفر الفوري

In-stock shell and tube heat exchangers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

العديد من مصنعي المعدات الأصلية

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc. and other manufacturers. Every unit is an original OEM product with traceable provenance.

الجودة والتجديد

تقدم شركة IPP خدمات التجديد من خلال قسم UGE (Universal Glasteel Equipment)، الذي تأسس عام 1995، والذي يضم أكثر من 700 سفينة وأكثر من 2700 قطعة غيار.

حضور عالمي في 15 دولة

تدير شركة IPP مكاتب في 15 دولة: البرازيل، كندا، الصين، جمهورية التشيك، فرنسا، ألمانيا، الهند، إيطاليا، المكسيك، باكستان، البرتغال، رومانيا، تركيا، المملكة المتحدة، والولايات المتحدة. وقد خدمت IPP أكثر من 160,000 عميل حول العالم.

مجموعة كاملة من المواد والمواصفات

IPP stocks shell and tube heat exchangers across a wide range of specifications to match your process requirements.

How Buying a Used Shell And Tube Heat Exchanger Works

The process of purchasing used shell and tube heat exchangers from IPP follows five steps, from specification to delivery.

1

تقديم المتطلبات

شاركنا مواصفاتك: السعة، مادة الصنع، تصنيف الضغط، درجة الحرارة، والتطبيق. أو تصفح مخزوننا القابل للبحث.

2

استلام حزمة البيانات

ترسل شركة IPP ورقة بيانات مفصلة عن المعدات تتضمن المواصفات والأبعاد وتقرير الحالة والصور.

3

افحص المعدات

اتصل بشركة IPP لترتيب زيارة ميدانية أو لطلب جولة فيديو مباشرة مع أحد أعضاء فريق IPP في أحد مواقعنا العالمية.

4

خيارات التجديد

تقدم شركة IPP خدمات التجديد من خلال قسم UGE التابع لها (أكثر من 700 سفينة، وأكثر من 2700 قطعة غيار متوفرة). تواصل مع IPP لمعرفة المزيد عن الخدمات الإضافية.

5

التعبئة والتغليف والتسليم

تتولى شركة IPP تنسيق عمليات التعبئة والتغليف والشحن والتوصيل إلى موقع مصنعك. نوفر خدمة الشحن إلى جميع أنحاء العالم من مكاتبنا المنتشرة في 15 دولة.

Industries That Buy Used Shell and Tube Heat Exchangers

IPP supplies used shell and tube heat exchangers to manufacturers across multiple process industries worldwide.

الصيدلة

المعالجة الكيميائية

التكنولوجيا الحيوية

الأطعمة والمشروبات

البيئة

النفط والغاز

مياه الصرف الصحي

المواد الكيميائية الدقيقة

الدهانات والطلاءات

البتروكيماويات

Frequently Asked Questions About Buying Used Shell and Tube Heat Exchangers

Answers to the most common questions from procurement and operations teams evaluating used shell and tube heat exchangers.

How many shell and tube heat exchangers does IPP have in stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. متوفر بأنواع مختلفة من الفولاذ المقاوم للصدأ: 304، 316، والفولاذ الأوستنيتي. تصفح مخزون IMS للاطلاع على المنتجات المتوفرة حاليًا.

What condition grades are available for used shell and tube heat exchangers?

IPP stocks shell and tube heat exchangers in multiple conditions: Used, Unused, Refurbished/Rebuilt, New. تصفح المخزون الحالي للاطلاع على خيارات الحالة المتاحة.

Does IPP sell new shell and tube heat exchangers as well as used?

نعم. IPP stocks new shell and tube heat exchangers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. اتصل بشركة IPP للحصول على تفاصيل حول المخزون الجديد.

ما هي مواد البناء المتاحة؟

IPP stocks shell and tube heat exchangers in Stainless Steel 316, Graphite, Stainless Steel 304, Stainless Steel Austenitic construction. اتصل بـ IPP لمناقشة متطلبات المواد لتطبيقك.

What manufacturers of shell and tube heat exchangers does IPP stock?

IPP stocks shell and tube heat exchangers from VICARB, Doyle and Roth, Atlas Industrial, Delta Tee International Inc., Graham and other manufacturers. تصفح المخزون الحالي للاطلاع على الشركات المصنعة المتاحة.

How much can I save buying used shell and tube heat exchangers versus new?

Buying used shell and tube heat exchangers from IPP can save up to 50% of capital and 90% of lead time versus buying new. تختلف قيمة التوفير الدقيقة باختلاف الشركة المصنعة، والسعة، ومواد التصنيع، والحالة. تواصل مع شركة IPP لمعرفة أسعار الوحدات المحددة.

How long does it take to receive shell and tube heat exchangers from IPP?

In-stock shell and tube heat exchangers are ready to ship. توفر شركة GPS التابعة لشركة IPP معدات جديدة مصنعة حسب الطلب بمتوسط مدة تسليم تتراوح بين 12 و 16 أسبوعًا. تقوم شركة IPP بالشحن من مكاتبها في 15 دولة حول العالم.

هل تتولى شركة IPP عمليات الشحن والنقل؟

تتولى شركة IPP تنسيق التعبئة والتغليف والشحن والتوصيل إلى موقع مصنعك. مع مكاتب في 15 دولة و أكثر من 160,000 عميل حول العالم, تتمتع شركة IPP بخبرة واسعة في مجال الخدمات اللوجستية للمعدات على مستوى العالم.

أنواع أخرى من المعدات من IPP

In addition to shell and tube heat exchangers, IPP stocks equipment across multiple categories for complete process solutions.

المفاعلات

المبخرات

الدبابات

Looking for New Shell and Tube Heat Exchangers?

تُورّد مجموعة IPP معدات جديدة من خلال شركتها التابعة Gale Process Solutions (GPS)، التي تُقدّم معدات مُصنّعة حسب الطلب مع متوسط فترة تسليم تتراوح بين 12 و16 أسبوعًا. كما تُقدّم IPP معدات مُعاد تغليفها بالزجاج من خلال قسمها UGE (Universal Glasteel Equipment).

Ready to Buy Shell and Tube Heat Exchangers?

تُقدّم شركة IPP معدات معالجة عالية الجودة في جميع أنحاء العالم منذ عام 1980، وتخدم أكثر من 160,000 عميل. أخبرنا باحتياجاتك، وسيقوم فريقنا بالرد عليك بعرض المنتجات المتوفرة لدينا وأسعارها المناسبة.