Buy Used Nutsche Filters for Sale

Buying used nutsche filters through International Process Plants gives chemical, pharmaceutical, food and beverage, and environmental wastewater operators access to jacketed agitated pressure vessels that combine cake filtration, washing, and drying inside a single sealed enclosure from JENS OLSEN, Seitz-Werke, Wollner & Platz, Pfaudler, and other OEM manufacturers.
Filtration areas span from 0.3 m² (3.2 ft²) on a Seitz-Werke 60/1 up to 6 m² (64.6 ft²) on a Von Roll unit. Vessel diameters run from 584 mm (23 in) to 2,800 mm (110.2 in) across the inventory. Internal pressure ratings reach 6 bar (87 psi), with units rated for vacuum service as well. Internal temperature ratings extend to 300 °C (572 °F) on Wollner & Platz vessels. Material grades include Stainless Steel 316, Stainless Steel Austenitic, and Glasslined construction.

Seitz and Seitz-Werke models include the 60/1, EF-100.300-CW, and EF100-500-CW series. Most vessels carry heating jackets rated up to 10.3 bar (150 psi) for steam or hot-oil drying duty. Selected units include rake or hydraulic raker agitators for cake smoothing and discharge. All listed units are offered in used condition with traceable IMS records. Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new.

10+

Nutsche Filters in Stock

1980

Засновано з

15

Країни з офісами

Buy Used Nutsche Filters by Material

IPP stocks nutsche filters across multiple material grades, including Stainless Steel 316, Stainless Steel Austenitic, and Glasslined construction. Choose the material that matches your process chemistry and corrosion requirements.

Buy Used Stainless Steel Nutsche Filters for Sale

IPP stocks stainless steel nutsche filters in both 316 and austenitic grades, suited to corrosive solvents, sanitary process duty, and elevated-temperature drying. Available from JENS OLSEN, Seitz-Werke, Seitz, Wollner & Platz, and Von Roll (Switzerland).

Von Roll Stainless Steel 316 — 6 m²

Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator for cake smoothing and discharge.

Площа фільтрації:6 m² (64.6 ft²) filtration area

Діаметр:2,800 mm (110.2 in) diameter

Матеріал:Нержавіюча сталь 316

Виробник:Von Roll (Switzerland)

Rake:Rake agitator equipped

JENS OLSEN Stainless Steel 316 — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, jacketed pressure-and-vacuum service, and 1,900 mm (74.8 in) vessel diameter.

Площа фільтрації:2.8 m² (29.6 ft²) filtration area

Діаметр:1,900 mm (74.8 in) diameter

Тиск:2 бари (29 фунтів на квадратний дюйм)

Температура:134 °C (273.2 °F)

Вакуум:Vacuum-rated, jacketed

Матеріал:Нержавіюча сталь 316

Seitz EF-100.300-CW — 0.85 m²

Used Seitz EF-100.300-CW stainless steel 316 nutsche filter with 0.85 m² (9.1 ft²) filtration area, 6 bar pressure rating, and jacketed body for hot-oil or steam drying.

Площа фільтрації:0.85 m² (9.1 ft²) filtration area

Діаметр:1,000 mm (39.4 in) diameter

Тиск:6 бар (87 фунтів на квадратний дюйм)

Температура:165 °C (329 °F)

Виробник:Seitz

Модель:EF-100.300-CW

Куртка:Jacketed body, clamped bottom head

Buy Used Glass-Lined Nutsche Filters for Sale

IPP stocks Pfaudler glass-lined nutsche filters for highly corrosive acids, chlorinated solvents, and pharmaceutical intermediates that demand a non-reactive contact surface. Glass-lined construction protects the vessel and the product from metal pickup during long filtration and drying cycles.

Pfaudler Glasslined — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, 232.2 °C temperature rating, and a stainless steel 316 jacket rated to 10.3 bar for high-pressure steam.

Площа фільтрації:0.52 m² (5.6 ft²) filtration area

Діаметр:813 mm (32 in) diameter

Тиск:3,4 бар (50 фунтів на квадратний дюйм)

Температура:232,2 °C (450 °F)

Тиск у куртці:Jacket 10.3 bar (150 psi), SS 316

Матеріал:Glasslined wetted surfaces

Buy Used Nutsche Filters in Other Materials for Sale

IPP also lists nutsche filters whose primary material grade is not separately classified, typically jacketed shells suited to a range of utility duties. Contact our team for the latest material certifications and condition reports on these units.

Nutsche Filter — 889 mm (35 in) Diameter

Used nutsche filter with 889 mm (35 in) vessel diameter and a stainless steel 316 jacket, mounted on four lugs and ready for re-piping into a process line.

Діаметр:889 mm (35 in) diameter

Overall Height:508 mm (20 in) overall height

Модель куртки:Stainless Steel 316 jacket

Support Details:Mounted on lugs

Хвороба:Стан у використанні

Buy Used Nutsche Filters for Sale by Manufacturer

IPP carries nutsche filters from a wide spread of OEM builders, with JENS OLSEN and Seitz-Werke representing the deepest named positions in current inventory. Buying from a recognized OEM helps ensure spare-part availability, plate and gasket compatibility, and operator familiarity with the discharge mechanism.

Buy Used JENS OLSEN Nutsche Filters for Sale

JENS OLSEN is one of the deepest named OEM positions in IPP’s nutsche filter inventory. Available units include jacketed stainless steel 316 vessels in pressure-and-vacuum configurations with hydraulic raker agitators.

JENS OLSEN Stainless Steel 316 — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum-rated jacket, and 1,000 mm (39.4 in) straight side length for deep cake handling.

Площа фільтрації:2.8 m² (29.6 ft²) filtration area

Діаметр:1,900 mm (74.8 in) diameter

Тиск:2 бари (29 фунтів на квадратний дюйм)

Температура:134 °C (273.2 °F)

Вакуум:Vacuum service rated

Матеріал:Нержавіюча сталь 316

JENS OLSEN Stainless Steel 316 — 1.75 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 1.75 m² (18.8 ft²) filtration area, mounted in two A-frames, and a jacketed shell rated for 2 bar service.

Площа фільтрації:1.75 m² (18.8 ft²) filtration area

Діаметр:1,500 mm (59.1 in) diameter

Тиск:2 бари (29 фунтів на квадратний дюйм)

Температура:134 °C (273.2 °F)

Support Details:Mounted in A-frames

Матеріал:Нержавіюча сталь 316

Buy Used Seitz-Werke Nutsche Filters for Sale

Seitz-Werke is another deep OEM position in IPP’s nutsche filter listings. Available model series include the small-batch 60/1 and the EF100-500-CW pressure filter.

Seitz-Werke 60/1 — 0.3 m²

Used Seitz-Werke 60/1 stainless steel austenitic nutsche filter with 0.3 m² (3.2 ft²) filtration area, 0.12 m³ cake volume, and half-pipe limpet jacket for thermal control during drying.

Площа фільтрації:0.3 m² (3.2 ft²) filtration area

Cake Volume:0.12 m³ (4.2 ft³) cake volume

Тиск:6 бар (87 фунтів на квадратний дюйм)

Температура:143 °C (289.4 °F)

Jacket Type:Half-pipe limpet jacket

Матеріал:Нержавіюча сталь аустенітна

Seitz-Werke EF100-500-CW — 200 °C

Used Seitz-Werke EF100-500-CW stainless steel 316 nutsche filter with 200 °C temperature rating, dished and clamped heads, and four-leg base for floor mounting.

Діаметр:910 mm (35.8 in) diameter

Тиск:6 бар (87 фунтів на квадратний дюйм)

Температура:200 °C (392 °F)

Top Head Type:Dished

Тип нижньої головки:clamped heads

Support Details:Mounted on 4 legs

Матеріал:Нержавіюча сталь 316

Buy Used Nutsche Filters from Other Manufacturers

Beyond JENS OLSEN and Seitz-Werke, IPP also lists nutsche filters from Pfaudler, Wollner & Platz, Von Roll (Switzerland), and Seitz. These units span small-batch glass-lined service through high-area cake handling for industrial duty.

Pfaudler Glasslined — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, elliptical clamped heads, and a 232.2 °C jacket rating for high-temperature drying duty.

Площа фільтрації:0.52 m² (5.6 ft²) filtration area

Діаметр:813 mm (32 in) diameter

Тиск:3,4 бар (50 фунтів на квадратний дюйм)

Температура:232,2 °C (450 °F)

Тиск у куртці:Jacket 10.3 bar (150 psi)

Матеріал:Glasslined construction

Von Roll (Switzerland) — 6 m²

Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator for industrial cake duty.

Площа фільтрації:6 m² (64.6 ft²) filtration area

Діаметр:2,800 mm (110.2 in) diameter

Матеріал:Нержавіюча сталь 316

Rake:Rake agitator equipped

Виробник:Von Roll (Switzerland)

Wollner & Platz — 300 °C

Used Wollner & Platz stainless steel austenitic nutsche filter rated for 300 °C (572 °F) internal temperature, with sight-glass nozzles and jacket rated to 8 bar.

Діаметр:600 mm (23.6 in) diameter

Тиск:6 бар (87 фунтів на квадратний дюйм)

Температура:300 °C (572 °F)

Тиск у куртці:Jacket 8 bar (116 psi)

Nozzle Schedule:Sight-glass top nozzles

Матеріал:Нержавіюча сталь аустенітна

Buy Used Nutsche Filters for Sale by Condition

IPP currently lists nutsche filters in used condition. Each unit was previously installed in production service, inspected on intake, and is offered with traceable IMS records.

Buy Used Nutsche Filters for Sale

Used nutsche filters are the entire current condition position in IPP’s listings. These vessels carry their original OEM filter plates, jackets, and discharge hardware, and are offered as-is at the lowest price point.

Used Von Roll (Switzerland) — 6 m²

Used Von Roll (Switzerland) stainless steel 316 nutsche filter with 6 m² (64.6 ft²) filtration area, 2,800 mm (110.2 in) vessel diameter, and rake agitator.

Хвороба:Стан у використанні

Площа фільтрації:6 m² (64.6 ft²) filtration area

Діаметр:2,800 mm (110.2 in) diameter

Матеріал:Нержавіюча сталь 316

Rake:Rake agitator equipped

Used Pfaudler Glasslined — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, jacket rated to 10.3 bar, and 232.2 °C internal temperature rating.

Хвороба:Стан у використанні

Площа фільтрації:0.52 m² (5.6 ft²) filtration area

Тиск:3,4 бар (50 фунтів на квадратний дюйм)

Температура:232,2 °C (450 °F)

Тиск у куртці:Jacket 10.3 bar (150 psi)

Матеріал:Зі скляною підкладкою

Used JENS OLSEN — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum service rating, and 1,900 mm (74.8 in) diameter vessel.

Хвороба:Стан у використанні

Площа фільтрації:2.8 m² (29.6 ft²) filtration area

Діаметр:1,900 mm (74.8 in) diameter

Вакуум:Vacuum service rated

Матеріал:Нержавіюча сталь 316

Ready to Buy a Used Nutsche Filter?

Tell us your specifications and requirements. Our team will match your needs against current nutsche filters inventory and provide a detailed quote.

Buying Used Nutsche Filters vs Buying New

Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new nutsche filters compare across key factors.
Фактор Використано з IPP Новий (OEM)
Вартість обладнання Значна економія порівняно з новою ціною OEM Повна ціна OEM-каталогу
Графік доставки В наявності одиниці, готові до відправки Збільшені терміни виконання (нове виробництво)
Матеріали Stainless Steel 316, Stainless Steel Austenitic, Glasslined Спеціально визначено
Номінальний тиск 2 bar (29 psi) to 6 bar (87 psi) Виготовлено на замовлення за специфікацією
Виробники Seitz-Werke, Wollner & Platz, JENS OLSEN and others Один OEM-виробник
Вплив на навколишнє середовище Подовжує термін служби обладнання, зменшує відходи Споживання нової сировини

Advantages of Buying Used Nutsche Filters from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver nutsche filters ready for your process.

Значна економія коштів

Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Негайна доступність

In-stock nutsche filters from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Кілька виробників оригінального обладнання (OEM)

IPP stocks nutsche filters from Seitz-Werke, Wollner & Platz, JENS OLSEN, Seitz and other manufacturers. Every unit is an original OEM product with traceable provenance.

Якість та ремонт

IPP пропонує послуги з ремонту через свій підрозділ UGE (Universal Glasteel Equipment), заснований у 1995 році, який має в наявності понад 700 резервуарів та понад 2700 деталей.

Глобальна присутність у 15 країнах

IPP має офіси у 15 країнах: Бразилії, Канаді, Китаї, Чеській Республіці, Франції, Німеччині, Індії, Італії, Мексиці, Пакистані, Португалії, Румунії, Туреччині, Великій Британії та Сполучених Штатах. IPP обслужила понад 160 000 клієнтів по всьому світу.

Повний асортимент матеріалів та специфікацій

IPP stocks nutsche filters across a wide range of specifications to match your process requirements.

How Buying a Used Nutsche Filter Works

The process of purchasing used nutsche filters from IPP follows five steps, from specification to delivery.

1

Вимоги до подання

Поділіться своїми характеристиками: місткість, матеріал виготовлення, номінальний тиск, температура та застосування. Або перегляньте наш каталог із можливістю пошуку.

2

Отримання пакету даних

IPP надсилає детальний паспорт обладнання зі специфікаціями, розмірами, звітом про стан та фотографіями.

3

Перевірте обладнання

Зверніться до IPP, щоб домовитися про візит на об'єкт або замовити відеоінструктаж у реальному часі з членом команди IPP в одному з наших глобальних офісів.

4

Варіанти ремонту

IPP пропонує послуги з ремонту через свій підрозділ UGE (понад 700 судин, понад 2700 деталей на складі). Зверніться до IPP для отримання детальної інформації про додаткові послуги.

5

Упаковка та доставка

IPP координує пакування, упаковку, перевезення та доставку на ваш завод. Доставка по всьому світу з офісів у 15 країнах.

Industries That Buy Used Nutsche Filters

IPP supplies used nutsche filters to manufacturers across multiple process industries worldwide.

Фармацевтичний

Хімічна обробка

Біотехнологія

Їжа та напої

Екологічний

Нафта і газ

Стічні води

Тонкі хімікати

Фарби та покриття

Нафтохімія

Frequently Asked Questions About Buying Used Nutsche Filters

Answers to the most common questions from procurement and operations teams evaluating used nutsche filters.

IPP stocks nutsche filters from Seitz-Werke, Wollner & Platz, JENS OLSEN, Seitz, Pfaudler and other manufacturers. Available in Stainless Steel 316, Stainless Steel Austenitic, Glasslined construction. Browse the IMS inventory for current availability.

IPP stocks nutsche filters in multiple conditions: Used. Перегляньте поточний асортимент, щоб дізнатися про доступні варіанти стану.

Так. IPP stocks new nutsche filters through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Зверніться до IPP для отримання детальної інформації про нові запаси.

IPP stocks nutsche filters in Stainless Steel 316, Stainless Steel Austenitic, Glasslined construction. Зверніться до IPP, щоб обговорити вимоги до матеріалів для вашої заявки.

IPP stocks nutsche filters from Seitz-Werke, Wollner & Platz, JENS OLSEN, Seitz, Pfaudler and other manufacturers. Перегляньте поточний асортимент, щоб побачити доступних виробників.

Buying used nutsche filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. Точна економія залежить від виробника, потужності, матеріалу виготовлення та стану. Зверніться до IPP, щоб дізнатися ціни на конкретні пристрої.

In-stock nutsche filters are ready to ship. Дочірня компанія IPP GPS постачає нове обладнання, виготовлене на замовлення, із середнім терміном поставки 12–16 тижнів. IPP здійснює доставку з офісів у 15 країнах світу.

IPP координує пакування, упаковку, перевезення та доставку на ваш заводський майданчик. З офісами у 15 країнах і понад 160 000 клієнтів по всьому світу, IPP має великий досвід у глобальній логістиці обладнання.

Інші типи обладнання від IPP

In addition to nutsche filters, IPP stocks equipment across multiple categories for complete process solutions.

Looking for New Pressure Leaf Filters?

Група IPP постачає нове обладнання через свою дочірню компанію Gale Process Solutions (GPS), яка пропонує виготовлене на замовлення обладнання із середнім терміном доставки 12–16 тижнів. IPP також пропонує обладнання для повторного скління через свій підрозділ UGE (Universal Glasteel Equipment).

Ready to Buy Nutsche Filters?

IPP постачає якісне технологічне обладнання по всьому світу з 1980 року, обслуговуючи понад 160 000 клієнтів. Розкажіть нам, що вам потрібно — наша команда відповість, запропонувавши відповідний асортимент та ціну.