Buy Used Mills for Sale

Buying used mills through International Process Plants gives chemical, pharmaceutical, food, mineral, and paints & coatings processors access to 64 used mills across 6 grinding and milling technologies—shot & sand (bead), colloid, ball, roll, pellet, and Kady mills from Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, and other OEM manufacturers. ▶

Materials of construction include stainless steel 304, 316, and austenitic grades, carbon steel, chrome-plated, and rubber-lined construction. Condition options include used, unused surplus, refurbished/rebuilt, and new. IPP stocks a wide range of industrial mills from leading brands.

Used mills are essential for micronizing APIs and excipients in pharmaceuticals. For grinding spices, sugars, grains, and dairy in food and beverage. For dispersing solids into coatings, inks, and additives in chemicals. And for dry or wet milling of calcium carbonate, kaolin, and metal ores in mineral processing. Buying used mills from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

60+

Mills in Stock

6

Mill Subtypes

25

Виробник оригінального обладнання (OEM)

Shot & Sand Mills

Featured: Netzsch SS 304 shot & sand mill

Колоїдні млини

Featured: Peters & Smith — 1.14 m³ (40.1 ft³)

Ball Mills

Featured: SS 304 ball mill — 1.59 m³ (56.1 ft³)

Валкові млини

Featured: Chrome 2- and 3-roll mill

Buy Used Mills for Sale by Subtype

IPP stocks used mills across 6 grinding and milling technologies. Browse representative units from each mill group below.

Shot & Sand Mills for Sale

Shot and sand mills (also called bead mills) are the deepest subtype position in IPP’s mill inventory with 33 units in stock. Used for wet grinding and dispersion of pigments, inks, coatings, and pharmaceutical slurries. Netzsch, Dyno WAB, Asada Machine Works, FrymaKoruma, and Merkel are the deepest brand positions.

Netzsch LMJ 55 SS 316 Shot & Sand

Used Netzsch LMJ 55 stainless steel 316 shot & sand mill. 408 mm (16.1 in) diameter by 1,450 mm (56.3 in) length horizontal mill driven by a 75 kW (100.6 HP) motor.

Виробник:Netzsch LMJ 55

Матеріал:Нержавіюча сталь 316

Діаметр:408 mm (16.1 in)

Довжина:1,450 mm (56.3 in)

Потужність двигуна:75 kW (100.6 HP)

Орієнтація:Горизонтальний

Power Transmission:Belt drive

Dyno WAB KD15 SS 316 — 0.01 m³ (0.35 ft³)

Used Dyno WAB KD15 stainless steel 316 clad shot & sand mill. 0.01 m3 (0.35 ft3) design capacity, 4 bar (58 psi) pressure rating with Loher 15 kW (20.1 HP) motor.

Проектування ємності:0.01 m3 (0.35 ft3)

Матеріал:Stainless Steel 316 (clad)

Діаметр:290 mm (11.4 in)

Довжина:430 mm (16.9 in)

Тиск:4 бари (58 фунтів на квадратний дюйм)

Потужність двигуна:15 кВт (20,1 к.с.)

Asada Machine Works SS 304 — 0.22 m³ (7.8 ft³)

Used Asada Machine Works stainless steel 304 shot & sand mill. 0.22 m3 (7.8 ft3) design capacity with SS internal liner designed for easy replacement and 37.3 kW (50 HP) motor.

Проектування ємності:0.22 m3 (7.8 ft3)

Матеріал:Нержавіюча сталь 304

Діаметр:444.5 mm (17.5 in)

Довжина:1,450 mm (58 in)

Lining Type:SS internal liner

Потужність двигуна:37,3 кВт (50 к.с.)

Colloid Mills for Sale

IPP stocks 14 used colloid mills for dispersion, emulsification, and particle size reduction of wet slurries. Manufacturers include Alpine (Hosokawa), Peters & Smith, IKA-Werk, Bepex, Williams, Reitz, and Premier Colloid Mills.

Peters & Smith SS 304 — 1.14 m³ (40.1 ft³)

Used Peters & Smith stainless steel 304 colloid mill. 1.14 m3 (40.1 ft3) design capacity with half-pipe limpet jacket rated to 3.4 bar (50 psi), Reliance 18.6 kW (25 HP) motor and chrome-plated steel shot media.

Проектування ємності:1.14 m3 (40.1 ft3)

Матеріал:Нержавіюча сталь 304

Діаметр:1050 мм (42 дюйми)

Довжина:1,550 mm (60.5 in)

Тиск у куртці:3,4 бар (50 фунтів на квадратний дюйм)

Потужність двигуна:18.6 kW (25 HP)

ЗМІ:5/16″ chrome-plated steel shot

Alpine (Hosokawa) 1 SH SS 304

Used Alpine (Hosokawa) Model 1 SH stainless steel 304 colloid mill. 88.9 mm (3.5 in) diameter by 2,450 mm (96 in) long with 5.6 kW (7.5 HP) Reliance motor running at 9,600 RPM drive speed.

Модель:Alpine (Hosokawa) 1 SH

Матеріал:Нержавіюча сталь 304

Діаметр:88.9 mm (3.5 in)

Довжина:2450 мм (96 дюймів)

Drive Power:5,6 кВт (7,5 к.с.)

Drive RPM:9,600

New Gale Multi-Mill SS 316

New Gale Process Solutions Multi-Mill stainless steel 316 colloid mill. 0.008 m3 (0.3 ft3) design capacity with 330 mm (13 in) diameter, vertical orientation, and 2.2 kW (3 HP) direct-coupled drive at 1,440 RPM.

Хвороба:New (Gale Process Solutions)

Матеріал:Нержавіюча сталь 316

Проектування ємності:0.008 m3 (0.3 ft3)

Діаметр:330 mm (13 in)

Drive Power:2,2 кВт (3 к.с.)

Drive RPM:1,440

Орієнтація:Вертикальний

Ball & Roll Mills for Sale

IPP stocks 8 used ball mills and 6 used roll mills. Ball mill manufacturers include Blaw Knox, Hardinge, TEMA Siebtechnik, and Engineering Plastics. Roll mills include Gundlach, Farrell, and lab-scale 2-roll units.

Hardinge Carbon Steel Ball Mill

Used Hardinge carbon steel ball mill. 2,150 mm (84.1 in) diameter by 1,500 mm (59.8 in) length with 111.9 kW (150 HP) belt-driven motor and electric power transmission.

Виробник:Hardinge

Матеріал:Вуглецева сталь

Діаметр:2,150 mm (84.1 in)

Довжина:1,500 mm (59.8 in)

Потужність двигуна:111,9 кВт (150 к.с.)

Power Transmission:Belt drive

Blaw Knox Carbon Steel Ball Mill

Used Blaw Knox carbon steel ball mill with Ni-hard liner. 1,850 mm (72 in) diameter by 3,050 mm (120 in) length, rated to 10.7 bar (155 psi) and 343.3 degrees C (650 degrees F) with full vacuum capability.

Виробник:Блоу Нокс

Діаметр:1850 мм (72 дюйми)

Довжина:3050 мм (120 дюймів)

Тиск:10.7 bar (155 psi)

Температура:343,3 °C (650 °F)

Lining Type:CS/Ni-hard lined

Вакуум:Yes (full vacuum)

Gundlach 4080S Stainless 2-Roll Mill

Used Gundlach Model 4080S stainless steel 2-roll mill. 610 mm (24 in) roll diameter by 2,450 mm (96 in) roll length, driven by a 111.9 kW (150 HP) motor at 60 Hz.

Модель:Gundlach 4080S

Матеріал:Нержавіюча сталь

Roll Diameter:610 мм (24 дюйми)

Roll Length:2450 мм (96 дюймів)

Number of Rolls:2

Потужність двигуна:111,9 кВт (150 к.с.)

Pellet & Kady Mills for Sale

IPP stocks 2 pellet mills and 1 Kady mill across specialty milling applications. Pellet mills include Baker Perkins and Black Clawson units; the Kady mill is a Powtec RTS 350 with a stainless steel 304 rotor-stator.

Baker Perkins SS 304 Pellet Mill

Used Baker Perkins stainless steel 304 pellet mill. 177.8 mm (7 in) diameter die with adjustable cutting blade running at 10,000 RPM, 3.7 kW (5 HP) electric drive, and 200 micron die outlets.

Виробник:Бейкер Перкінс

Матеріал:Нержавіюча сталь 304

Діаметр:177.8 mm (7 in)

Blade Speed:10,000 RPM

Drive Power:3,7 кВт (5 к.с.)

Die Outlets:200 micron

Black Clawson SS 316 Pellet Mill

Used Black Clawson Model 114012320 stainless steel 316 pellet mill. 22 kW (29.5 HP) drive at 1,470 RPM with 1.98 mm diameter die holes, rated to 230 degrees C (446 degrees F).

Виробник:Black Clawson

Матеріал:Нержавіюча сталь 316

Drive Power:22 кВт (29,5 к.с.)

Drive RPM:1,470

Температура:230 °C (446 °F)

Die Holes:1.98 mm (0.078 in) diameter

Powtec RTS 350 x 300 Kady Mill SS 304

Used Powtec RTS 350 x 300 stainless steel 304 Kady mill. 350 mm (13.8 in) diameter by 300 mm (11.8 in) length with 3 kW (4 HP) drive at 1,400 RPM and 0.16 m2 (1.72 ft2) sieve surface area.

Модель:Powtec RTS 350 x 300

Матеріал:Нержавіюча сталь 304

Діаметр:350 mm (13.8 in)

Довжина:300 mm (11.8 in)

Drive Power:3 kW (4 HP)

Sieve Area:0.16 m2 (1.72 ft2)

Buy Used Mills for Sale by Manufacturer

IPP stocks mills from a wide range of OEMs, with Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), and Dyno WAB representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, replacement parts, and operator familiarity.

Buy Used Netzsch Mills for Sale

Netzsch is the deepest single-manufacturer position in IPP’s mill inventory with 13 units. Available models include LMC 60CE, LME 20, LMJ 55, and LME4DCMS series shot & sand mills.

Netzsch LMC 60CE Carbon Steel

Used Netzsch LMC 60CE carbon steel shot & sand mill. 0.06 m3 (2.1 ft3) design capacity, 300 mm (11.8 in) diameter by 945 mm (37.2 in) horizontal with 37.3 kW (50 HP) motor and on/off controls.

Модель:LMC 60CE

Місткість:0.06 m3 (2.1 ft3)

Матеріал:Вуглецева сталь

Діаметр:300 mm (11.8 in)

Довжина:945 mm (37.2 in)

Потужність двигуна:37,3 кВт (50 к.с.)

Netzsch LME 20 Carbon Steel

Used Netzsch LME 20 carbon steel shot & sand mill. 0.02 m3 (0.71 ft3) capacity with 220 mm (8.7 in) diameter, 700 mm (27.6 in) length, 22.4 kW (30 HP) motor and 0.25 m3 (8.8 ft3) media volume.

Модель:LME 20

Місткість:0.02 m3 (0.71 ft3)

Діаметр:220 mm (8.7 in)

Довжина:700 mm (27.6 in)

Потужність двигуна:22,4 кВт (30 к.с.)

Media Volume:0.25 m3 (8.8 ft3)

Netzsch LME4DCMS SS 304

Used Netzsch LME4DCMS stainless steel 304 shot & sand mill. 152.4 mm (6 in) diameter by 457.2 mm (18 in) length with 3.7 kW (5 HP) drive, mounted on dollie wheels for easy moving.

Модель:LME4DCMS

Матеріал:Нержавіюча сталь 304

Діаметр:152,4 мм (6 дюймів)

Довжина:457,2 мм (18 дюймів)

Drive Power:3,7 кВт (5 к.с.)

Mounting:Dollie wheels

Buy Refurbished Merkel Mills for Sale

IPP stocks 4 refurbished/rebuilt Merkel shot & sand mills. Diameters range from 70 mm (2.8 in) to 80 mm (3.1 in), reconditioned for like-new performance at refurbished pricing.

Merkel Refurbished — 70 mm

Refurbished/Rebuilt Merkel shot & sand mill. 70 mm (2.8 in) diameter, reconditioned to original specifications.

Виробник:Merkel

Хвороба:Відремонтований/Перебудований

Діаметр:70 mm (2.8 in)

Підтип:Shot & Sand

Merkel Refurbished — 80 mm

Refurbished/Rebuilt Merkel shot & sand mill. 80 mm (3.1 in) diameter, reconditioned to OEM specifications.

Виробник:Merkel

Хвороба:Відремонтований/Перебудований

Діаметр:80 mm (3.1 in)

Підтип:Shot & Sand

Merkel 630597U Refurbished

Refurbished/Rebuilt Merkel Model 630597U shot & sand mill. 70 mm (2.8 in) diameter unit reconditioned to OEM specifications.

Модель:Merkel 630597U

Хвороба:Відремонтований/Перебудований

Діаметр:70 mm (2.8 in)

Підтип:Shot & Sand

Buy Used Asada Machine Works Mills for Sale

IPP stocks 3 Asada Machine Works stainless steel 304 shot & sand mills with matched 0.22 m3 (7.8 ft3) capacity and 37.3 kW (50 HP) drives.

Asada SS 304 — 0.22 m³ (7.8 ft³) (1)

Used Asada Machine Works stainless steel 304 shot & sand mill. 0.22 m3 (7.8 ft3) capacity, 444.5 mm (17.5 in) diameter by 1,450 mm (58 in) length with SS jacket and 37.3 kW (50 HP) motor.

Місткість:0.22 m3 (7.8 ft3)

Матеріал:Нержавіюча сталь 304

Діаметр:444.5 mm (17.5 in)

Довжина:1,450 mm (58 in)

Потужність двигуна:37,3 кВт (50 к.с.)

Куртка:Нержавіюча сталь

Asada SS 304 — 0.22 m³ (7.8 ft³) (2)

Used Asada Machine Works stainless steel 304 shot & sand mill. 0.22 m3 (7.8 ft3) capacity with SS internal liner designed for easy replacement and 37.3 kW (50 HP) motor.

Місткість:0.22 m3 (7.8 ft3)

Матеріал:Нержавіюча сталь 304

Діаметр:444.5 mm (17.5 in)

Довжина:1,450 mm (58 in)

Lining:SS internal liner

Потужність двигуна:37,3 кВт (50 к.с.)

Asada SS 304 — 0.22 m³ (7.8 ft³) (3)

Used Asada Machine Works stainless steel 304 shot & sand mill. Matched 0.22 m3 (7.8 ft3) capacity, 444.5 mm (17.5 in) diameter, SS internal liner, and 37.3 kW (50 HP) motor — ideal for parallel-line scale-up.

Місткість:0.22 m3 (7.8 ft3)

Матеріал:Нержавіюча сталь 304

Lining:SS internal liner

Потужність двигуна:37,3 кВт (50 к.с.)

Підтип:Shot & Sand

Buy Used Alpine (Hosokawa) Mills for Sale

IPP stocks 3 Alpine (Hosokawa) colloid mills across Model W, Model 1 SH, and Model B160 UPZ configurations.

Alpine (Hosokawa) Model W SS 304

Used Alpine (Hosokawa) Model W stainless steel 304 colloid mill. 0.25 kW (0.33 HP) drive at 14,000 RPM with Reliance Type P 56-frame motor — ideal for laboratory and pilot-scale dispersion.

Модель:Alpine (Hosokawa) W

Матеріал:Нержавіюча сталь 304

Drive Power:0.25 kW (0.33 HP)

Drive RPM:14,000

Мотор:Reliance Type P

Alpine (Hosokawa) 1 SH SS 304

Used Alpine (Hosokawa) Model 1 SH stainless steel 304 colloid mill. 88.9 mm (3.5 in) diameter by 2,450 mm (96 in) long with 5.6 kW (7.5 HP) Reliance motor at 9,600 RPM and mounted on castors.

Модель:Alpine (Hosokawa) 1 SH

Діаметр:88.9 mm (3.5 in)

Довжина:2450 мм (96 дюймів)

Drive Power:5,6 кВт (7,5 к.с.)

Drive RPM:9,600

Мотор:TEFC Reliance

Alpine (Hosokawa) B160 UPZ SS 304

Used Alpine (Hosokawa) Model B160 UPZ stainless steel 304 colloid mill. 45 mm (1.77 in) diameter by 1,500 mm (60 in) length, 7.5 kW (10 HP) belt-driven Reliance motor at 3,510 RPM, vertical orientation.

Модель:B160 UPZ

Матеріал:Нержавіюча сталь 304

Діаметр:45 mm (1.77 in)

Довжина:1500 мм (60 дюймів)

Drive Power:7,5 кВт (10 к.с.)

Орієнтація:Вертикальний

Buy Used Mills from Other OEMs

Beyond Netzsch, Merkel, Asada Machine Works, and Alpine (Hosokawa), IPP stocks mills from Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, Gundlach, Farrell, Baker Perkins, Black Clawson, IKA-Werk, and many other OEMs. IPP also stocks unbranded inventory where the original OEM is not recorded; specifications come directly from the IMS product page attributes.

FrymaKoruma MS50 SS 304

Used FrymaKoruma MS50 stainless steel 304 shot & sand mill. 54.4 kW (73 HP) drive, 4 bar (58 psi) pressure rating, 90 degrees C (194 degrees F) temperature, mounted in explosion-proof boxes.

Модель:FrymaKoruma MS50

Матеріал:Нержавіюча сталь 304

Drive Power:54.4 kW (73 HP)

Тиск:4 бари (58 фунтів на квадратний дюйм)

Температура:90 °C (194 °F)

Mounting:Explosion-proof

Dyno WAB KD 60C SS Austenitic

Used Dyno WAB KD 60C stainless steel austenitic shot & sand mill. 0.06 m3 (2.1 ft3) capacity, 300 mm (11.8 in) diameter by 960 mm (37.8 in) length, chrome barrel, 44 kW (59 HP) Loher motor at 1,485 RPM.

Модель:Dyno WAB KD 60C

Матеріал:SS Austenitic

Місткість:0.06 m3 (2.1 ft3)

Діаметр:300 mm (11.8 in)

Довжина:960 mm (37.8 in)

Потужність двигуна:44 kW (59 HP)

Barrel:Chrome

IKA-Werk W32KAAABAA6660 SS 316

Used IKA-Werk Model W32KAAABAA6660 stainless steel 316 colloid mill. 0.003 m3 (0.11 ft3) capacity, 25 bar (362.6 psi) pressure, 200 degrees C (392 degrees F), 11.2 kW (15 HP) electric drive.

Модель:IKA-Werk W32KAAABAA6660

Матеріал:Нержавіюча сталь 316

Місткість:0.003 m3 (0.11 ft3)

Тиск:25 bar (362.6 psi)

Температура:200 °C (392 °F)

Drive Power:11,2 кВт (15 к.с.)

Buy Used Mills for Sale by Condition

IPP stocks mills in used, unused surplus, refurbished/rebuilt, and new condition grades. Choose the condition that matches your budget, timeline, and performance requirements.

Buy Used Mills for Sale

Good used mills are the deepest condition position in IPP’s mill inventory. These units were previously installed in production service, inspected on intake, and offered as-is at the lowest price point while retaining OEM construction and components.

Used Netzsch LMC 60CE Shot & Sand

Used Netzsch LMC 60CE carbon steel shot & sand mill. 0.06 m3 (2.1 ft3) capacity with horizontal orientation and 37.3 kW (50 HP) motor.

Хвороба:Використано

Матеріал:Вуглецева сталь

Місткість:0.06 m3 (2.1 ft3)

Used Hardinge Carbon Steel Ball Mill

Used Hardinge carbon steel ball mill. 2,150 mm (84.1 in) diameter, 111.9 kW (150 HP) motor with belt drive.

Хвороба:Використано

Матеріал:Вуглецева сталь

Діаметр:2,150 mm (84.1 in)

Used Reitz RD-18-H32 Colloid Mill

Used Reitz Model RD-18-H32 carbon steel colloid mill. 457.2 mm (18 in) diameter vertical mill with 37.3 kW (50 HP) drive and Siemens belt-driven motor.

Хвороба:Використано

Модель:Reitz RD-18-H32

Drive Power:37,3 кВт (50 к.с.)

Buy Unused Surplus Mills for Sale

Невикористані надлишкові чилери були виготовлені, але ніколи не встановлювалися в процесі. Ці установки пропонують продуктивність нового обладнання з негайною доступністю зі значною знижкою порівняно з новими заводськими замовленнями.

Unused Roll Mill — 2 Roll

Unused 2-roll mill. 203.2 mm (8 in) roll diameter by 406.4 mm (16 in) roll length, manually adjustable rolls cored for steam heating, 11 kW (14.8 HP) Hi-Seal motor at 1,460 RPM.

Хвороба:Невикористаний

Roll Diameter:203.2 mm (8 in)

Roll Length:406,4 мм (16 дюймів)

Heating:Steam-heated rolls

Потужність двигуна:11 кВт (14,8 к.с.)

Unused Netzsch SS Other Shot & Sand

Unused Netzsch stainless steel shot & sand mill. 0.02 m3 (0.71 ft3) design capacity — factory inventory never installed.

Хвороба:Невикористаний

Виробник:Netzsch

Матеріал:Інші СС

Місткість:0.02 m3 (0.71 ft3)

Buy Refurbished/Rebuilt Mills for Sale

Refurbished/rebuilt mills have been reconditioned to OEM specifications. These units offer like-new performance at used pricing — ideal for processors who need warranted reliability without new-equipment lead times.

Merkel Refurbished — 70 mm

Refurbished/Rebuilt Merkel shot & sand mill. 70 mm (2.8 in) diameter, reconditioned to original specifications.

Хвороба:Відремонтований/Перебудований

Виробник:Merkel

Діаметр:70 mm (2.8 in)

NFT Refurbished Shot & Sand — 80 mm

Refurbished/Rebuilt NFT shot & sand mill. 80 mm (3.1 in) diameter, reconditioned for like-new operation.

Хвороба:Відремонтований/Перебудований

Виробник:NFT

Діаметр:80 mm (3.1 in)

Merkel 630597U Refurbished

Refurbished/Rebuilt Merkel Model 630597U shot & sand mill. 70 mm (2.8 in) diameter unit reconditioned to OEM specifications.

Хвороба:Відремонтований/Перебудований

Модель:Merkel 630597U

Діаметр:70 mm (2.8 in)

Buy New Mills for Sale

IPP stocks new mills built through its Gale Process Solutions (GPS) subsidiary. GPS provides custom fabricated equipment with 12–16 week average delivery.

New Gale Multi-Mill SS 316 Colloid

New Gale Process Solutions Multi-Mill stainless steel 316 colloid mill. 0.008 m3 (0.3 ft3) capacity, 330 mm (13 in) diameter, vertical orientation with 2.2 kW (3 HP) direct-coupled Hindustan motor at 1,440 RPM.

Хвороба:Новий

Виробник:Gale Process Solutions

Матеріал:Нержавіюча сталь 316

Місткість:0.008 m3 (0.3 ft3)

Drive Power:2,2 кВт (3 к.с.)

Mounting:Base plate w/ casters

Used Mill vs New Mill

Compare the trade-offs between buying a used or refurbished mill from IPP versus ordering a new mill from an OEM.

Attribute	Used Mill from IPP	New Mill from OEM
Capital cost	До 50% нижче	Повна ціна OEM-каталогу
Lead time	In stock; up to 90% shorter	12–16 weeks typical
Condition options	Used, unused, refurbished, new	New only
Manufacturers available	25+ OEMs in inventory	Один OEM-виробник на замовлення
Materials of construction	SS 304/316, CS, chrome, austenitic, rubber-lined	Material per specification
Inspection & data	IPP photo & spec package; on-site or video walkthrough	Drawing review only until FAT
Cost of trial / pilot	Low — matched units available for parallel lines	High — full new-build cost per pilot unit

Need a Used Mill? Ask an IPP Expert.

Tell us your material, throughput, particle size, and drive power requirements. Our team will match your specifications against mills in current inventory and provide a detailed quote.

Advantages of Buying Used Mills from IPP

«International Process Plants» поєднує понад 46 років досвіду в галузі технологічного обладнання, майже 150 співробітників у 15 країнах, а також має в наявності 15 000 технологічних систем і основних одиниць обладнання, щоб постачати вживані подрібнювачі, готові до використання у вашому процесі.

Значна економія коштів

Buying used mills from IPP can save up to 50% of capital and 90% of lead time versus buying new. With 64 mills across 6 subtypes, IPP offers a broad selection to match your budget and process requirements.

Негайна доступність

In-stock mills from IPP are ready to ship. New OEM mills require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new mills with 12–16 week average delivery.

6 Mill Subtypes in One Inventory

IPP stocks shot & sand, colloid, ball, roll, pellet, and Kady mills. One supplier for all your milling equipment needs.

Різні будівельні матеріали

Materials include stainless steel (SS 304, 316, austenitic), carbon steel, chrome-plated, and rubber-lined construction. Match the material to your process chemistry and abrasion requirements.

Глобальна присутність у 15 країнах

IPP має офіси у 15 країнах: Бразилії, Канаді, Китаї, Чеській Республіці, Франції, Німеччині, Індії, Італії, Мексиці, Пакистані, Португалії, Румунії, Туреччині, Великій Британії та Сполучених Штатах. IPP обслужила понад 160 000 клієнтів по всьому світу.

Провідні виробники оригінального обладнання (OEM)

IPP stocks mills from Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, Gundlach, and many additional manufacturers. Every unit is an original OEM product with traceable provenance.

How Buying a Used Mill Works

The process of purchasing a used mill from IPP follows five steps, from specification to delivery.

1

Вимоги до подання

Share your mill specifications: subtype, capacity, material, particle size, drive power, and application. Or browse our searchable mill inventory.

2

Отримання пакету даних

IPP sends a detailed equipment data sheet with capacity, dimensions, drive power, RPM, material of construction, and condition report with photographs.

3

Перевірте обладнання

Зверніться до IPP, щоб домовитися про візит на об'єкт або замовити відеоінструктаж у реальному часі з членом команди IPP в одному з наших глобальних офісів.

4

Варіанти ремонту

Contact IPP to discuss refurbishment, re-lining, replacement of grinding media, or other reconditioning services. IPP stocks refurbished Merkel and NFT shot & sand mills as proof of in-house reconditioning capability.

5

Упаковка та доставка

IPP координує пакування, упаковку, перевезення та доставку на ваш завод. Доставка по всьому світу з офісів у 15 країнах.

Browse All Mill Types

IPP stocks used mills across 6 milling technologies. Click any card below to view the full inventory and specifications for that mill type.

Shot & Sand Mills

Wet grinding bead mills for pigment dispersion, inks, coatings, and slurries.

Колоїдні млини

Rotor-stator mills for emulsification and fine wet dispersion of liquids and slurries.

Ball Mills

Rotating drum mills with steel or ceramic balls for impact and attrition grinding.

Валкові млини

2- and 3-roll mills for paste, pigment, and polymer dispersion with steam-heated rolls.

Пелетні млини

Die-extrusion mills for granulating feeds, fuels, and process materials into pellets.

Каді Міллс

High-shear rotor-stator mills with integrated sieve for size-controlled wet dispersion.

Related Process Equipment

Mills are commonly paired with size-reduction, mixing, and drying equipment. Browse adjacent IPP equipment categories.

Пульверизатори

Hammer, impact, and pin mills for dry size reduction of friable solids.

Змішувачі

Ribbon, paddle, conical, and high-shear mixers for upstream and downstream blending.

Сушарки

Rotary vacuum, fluid bed, spray, and ribbon dryers for moisture removal after milling.

Industries That Buy Used Mills

IPP supplies used mills to manufacturers across pharmaceutical, food, chemical, mineral, and paints & coatings industries worldwide.

Фармацевтичний

Хімічна обробка

Їжа та напої

Корисні копалини та гірничодобувна промисловість

Фарби та покриття

Pigments & Inks

Ceramics & Materials

Тонкі хімікати

Агрохімікати

Косметика

Frequently Asked Questions About Buying Used Mills

Answers to the most common questions from process teams and procurement teams evaluating used mills.

What types of mills does IPP stock?

IPP stocks 64 used mills across 6 subtypes: shot & sand mills (33 units), colloid mills (14 units), ball mills (8 units), roll mills (6 units), pellet mills (2 units), and Kady mills (1 unit). Manufacturers include Netzsch, Merkel, Asada Machine Works, Alpine (Hosokawa), Dyno WAB, FrymaKoruma, Peters & Smith, Hardinge, Blaw Knox, Gundlach, and others. Перегляньте інвентар IMS, щоб дізнатися про поточну наявність, або зв'яжіться з ІПП to discuss your specific milling requirements.

What is the difference between a shot & sand mill and a ball mill?

Shot & sand mills (also called bead mills) are typically horizontal or vertical wet grinding mills that use small grinding media (sand, glass beads, ceramic shot) to disperse pigments, inks, and slurries. Ball mills are larger rotating drums that use steel or ceramic balls to grind dry or wet materials by impact and attrition, typically for minerals, ceramics, and bulk solids. In IPP's inventory, shot & sand mills span 70–914 mm chamber diameters with moderate motor power, while ball mills include large rotating drums up to 2,150 mm (84.1 in) diameter with 111.9 kW (150 HP) drives.

Які будівельні матеріали доступні?

IPP stocks mills in stainless steel 304, 316, and austenitic grades, carbon steel, chrome-plated, and rubber-lined construction. Stainless steel 304/316 is preferred for food, pharmaceutical, and hygienic applications. Hardened carbon steel serves heavy-duty mineral and metal grinding. Rubber-lined and chrome-barreled designs serve corrosive and abrasive duties.

How much can I save buying a used mill versus new?

Buying used mills from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on mill subtype, manufacturer, material of construction, capacity, drive power, and condition. Contact IPP for pricing on specific units from our current mill inventory.

What condition grades are available for used mills?

IPP stocks mills in four condition grades: used, unused, refurbished/rebuilt, and new. Used units are previously installed equipment offered as-is. Unused units were manufactured but never installed in a process. Refurbished/rebuilt units — including Merkel and NFT shot & sand mills — have been reconditioned to OEM specifications. New units are factory-new equipment such as the Gale Process Solutions Multi-Mill.

What is the largest ball mill in IPP inventory?

The largest ball mills in IPP's mill inventory are the Hardinge units at 2,150 mm (84.1 in) diameter by 1,500 mm (59.8 in) length with 111.9 kW (150 HP) drives, and the Blaw Knox units at 1,850 mm (72 in) diameter by 3,050 mm (120 in) length rated to 10.7 bar (155 psi) and 343.3 °C (650 °F) with full vacuum. Contact IPP for current availability and condition details on these heavy-duty units.

Looking for New Mills?

IPP Group supplies new process equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. If you cannot find what you need in our used mill inventory, we can build to your specifications.

Ready to Buy a Used Mill?

IPP постачає якісне технологічне обладнання по всьому світу з 1980 року, обслуговуючи понад 160 000 клієнтів. Розкажіть нам, що вам потрібно — наша команда відповість, запропонувавши відповідний асортимент та ціну.

Attribute

Used Mill from IPP

New Mill from OEM

Capital cost

До 50% нижче

Повна ціна OEM-каталогу

Lead time

In stock; up to 90% shorter

12–16 weeks typical

Condition options

Used, unused, refurbished, new

New only

Manufacturers available

25+ OEMs in inventory

Один OEM-виробник на замовлення

Materials of construction

SS 304/316, CS, chrome, austenitic, rubber-lined

Material per specification

Inspection & data

IPP photo & spec package; on-site or video walkthrough

Drawing review only until FAT

Cost of trial / pilot

Low — matched units available for parallel lines

High — full new-build cost per pilot unit