Buy Used Holoflite & Screw Dryers for Sale

Buying used holoflite and screw dryers through International Process Plants gives chemical processing, wastewater treatment, mining, and pharmaceutical buyers access to indirect-heat dryers that use screws to convey and thermally process bulk solids in a single enclosed trough from Joy Denver, Svedala, Hi Line Industries, Reitz, Denver Equipment, Thies Kg Coesfeld Gmbh, and other OEM manufacturers. ▶

Materials of construction include Carbon Steel, Stainless Steel 316, Stainless Steel 304, and Stainless Steel 316L. Internal pressure ratings range from 0.005 bar (0.07 psi) on IPP# 208223 to 5.5 bar (80 psi) on IPP# 222018. Heat transfer surface areas span from 7.2 m² (78 ft²) on IPP# 91126 to 141.1 m² (1,500 ft²) on IPP# 232604. Screw configurations range from single-screw units through twin-screw and quad-screw designs.

IPP stocks Joy Denver units in the D-2420-6 and D12-20-5 model families. Svedala inventory includes the Q2424-6 quad-screw processor series. All units are in used condition. Buying used holoflite and screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

10+

Holoflite & Screw Dryers in Stock

1980

自成立以来

15

设有办事处的国家/地区

Joy Denver D-2420-6 Carbon Steel

Used — 53 m² heat transfer area

Denver Equipment Stainless Steel 316L

Used — 19 m² heat transfer area

Svedala Q2424-6 Carbon Steel

Used — 141.1 m² heat transfer area

Buy Used Holoflite & Screw Dryers by Material

IPP stocks holoflite and screw dryers in carbon steel and multiple stainless steel grades. The material of construction determines corrosion resistance, maximum operating temperature, and compatibility with the product being dried.

Buy Used Carbon Steel Holoflite & Screw Dryers for Sale

Carbon steel is the deepest material position in IPP’s holoflite and screw dryer inventory. Available from Joy Denver and Svedala, these units suit general industrial drying where elevated corrosion resistance is not required.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

材料：碳钢

传热表面积：53 m² (571 ft²) heat transfer area

内部压力：5.5 bar (80 psi)

内部温度：343.3 °C (650 °F)

螺丝数量：Four-screw configuration

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and hot-oil heating medium.

材料：碳钢

传热表面积：141.1 m² (1,500 ft²) heat transfer area

内部压力：2.1 巴（30 磅/平方英寸）

内部温度：343.3 °C (650 °F)

螺丝数量：Four-screw configuration

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area.

传热表面积：11.9 m² (128 ft²) heat transfer area

夹套压力：2.1 巴（30 磅/平方英寸）

外套温度：343.3 °C (650 °F)

螺丝数量：Single-screw configuration

健康）状况：二手

Buy Used Stainless Steel Holoflite & Screw Dryers for Sale

IPP stocks stainless steel holoflite and screw dryers in 316, 304, and 316L grades. Available from Denver Equipment, Thies Kg Coesfeld Gmbh, Hi Line Industries, and Reitz for corrosion-sensitive or sanitary drying applications.

Denver Equipment D-12-18-5 — 19 m²

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

材料：316L不锈钢

传热表面积：19 m² (204 ft²) heat transfer area

内部压力：2.1 巴（30 磅/平方英寸）

内部温度：343.3 °C (650 °F)

螺丝数量：Twin-screw configuration

Product Rate:907 kg/h (2,000 lb/h) product rate

Thies Kg Coesfeld Gmbh 2 V 410-24 — SS 316

Used Thies Kg Coesfeld Gmbh 2 V 410-24 stainless steel 316 holoflite and screw dryer with twin-screw design rated for 50 °C (122 °F) internal temperature.

材料：316不锈钢

内部温度：50 °C (122 °F) internal temperature

夹套压力：6 巴（87 磅/平方英寸）夹套压力

螺丝数量：Twin-screw configuration

宽度：700 mm (27.6 in) W

长度：3,750 mm (147.6 in) L

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

材料：304不锈钢

长度：3,050 mm (120 in) length

夹套压力：0.34 bar (5 psi) jacket pressure

螺丝数量：Single-screw configuration

健康）状况：二手

Buy Used Holoflite & Screw Dryers for Sale by Manufacturer

IPP stocks holoflite and screw dryers from six OEM manufacturers, with Joy Denver and Svedala representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Joy Denver Holoflite & Screw Dryers for Sale

Joy Denver is the deepest single-manufacturer position in IPP’s holoflite and screw dryer inventory. Available models include the D-2420-6 quad-screw processor and the D12-20-5 single-screw unit, all in carbon steel construction.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area, rated for 5.5 bar (80 psi) at 343.3 °C (650 °F).

材料：碳钢

传热表面积：53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

螺丝数量：Four-screw configuration

健康）状况：二手

Joy Denver D-2420-6 — IPP# 222019

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

材料：碳钢

传热表面积：53 m² (571 ft²) heat transfer area

内部压力：5.5 bar (80 psi)

内部温度：343.3 °C (650 °F)

螺丝数量：Four-screw configuration

健康）状况：二手

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area and 2.1 bar (30 psi) jacket pressure.

传热表面积：11.9 m² (128 ft²) heat transfer area

夹套压力：2.1 巴（30 磅/平方英寸）

外套温度：343.3 °C (650 °F)

螺丝数量：Single-screw configuration

长度：6,100 mm (240 in) length

健康）状况：二手

Buy Used Svedala Holoflite & Screw Dryers for Sale

Svedala is the second deepest OEM position in IPP’s holoflite and screw dryer inventory. Available units include the Q2424-6 quad-screw processor series in carbon steel construction with hot-oil heating medium.

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

材料：碳钢

传热表面积：141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

螺丝数量：Four-screw configuration

健康）状况：二手

Svedala Q2424-6 — IPP# 232605

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

材料：碳钢

传热表面积：141.1 m² (1,500 ft²) heat transfer area

内部压力：2.1 巴（30 磅/平方英寸）

内部温度：343.3 °C (650 °F)

螺丝数量：Four-screw configuration

健康）状况：二手

Svedala — 141.1 m² IPP# 232603

Used Svedala carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

材料：碳钢

传热表面积：141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

螺丝数量：Four-screw configuration

健康）状况：二手

Buy Used Holoflite & Screw Dryers from Other Manufacturers

Beyond Joy Denver and Svedala, IPP stocks holoflite and screw dryers from Hi Line Industries, Reitz, Denver Equipment, and Thies Kg Coesfeld Gmbh. These units span stainless steel grades for corrosion-sensitive and sanitary drying duties.

Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

材料：316L不锈钢

传热表面积：19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

螺丝数量：Twin-screw configuration

健康）状况：二手

Hi Line Industries 2155M25 — SS 316

Used Hi Line Industries 2155M25 stainless steel 316 holoflite and screw dryer with single-screw configuration rated for 1.03 bar (14.9 psi) at 148.9 °C (300 °F).

材料：316不锈钢

内部压力：1.03 bar (14.9 psi)

内部温度：148.9 °C (300 °F)

长度：4,100 mm (162 in) length

螺丝数量：Single-screw configuration

健康）状况：二手

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

材料：304不锈钢

长度：3,050 mm (120 in) length

夹套压力：0.34 bar (5 psi) jacket pressure

螺丝数量：Single-screw configuration

健康）状况：二手

Buy Used Holoflite & Screw Dryers for Sale by Condition

All holoflite and screw dryers currently in IPP’s inventory are in used condition. Used units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining original OEM screw and drive hardware.

Buy Used Holoflite & Screw Dryers for Sale

All holoflite and screw dryers in IPP’s current inventory are in good used condition. These units were previously installed in production service and retain their original OEM hollow-flight screws, trough bodies, drive assemblies, and heating jackets.

Used Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

健康）状况：二手

材料：碳钢

传热表面积：53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

螺丝数量：Four-screw configuration

Used Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

健康）状况：二手

材料：316L不锈钢

传热表面积：19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

螺丝数量：Twin-screw configuration

Used Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

健康）状况：二手

材料：碳钢

传热表面积：141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

螺丝数量：Four-screw configuration

Ready to Buy a Used Holoflite & Screw Dryer?

Tell us your specifications and requirements. Our team will match your needs against current holoflite and screw dryer inventory and provide a detailed quote.

Buying Used Holoflite & Screw Dryers vs Buying New

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new holoflite & screw dryers compare across key factors.

因素	源自IPP	全新（原厂）
设备成本	与全新原厂价格相比，可节省大量成本	完整原厂标价
交付时间表	现货供应，随时发货	延长交货周期（新制造）
材料	Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L	定制
压力等级	0.005 bar (0.07 psi) to 5.5 bar (80 psi)	根据规格定制
制造商	Joy Denver, Svedala, Hi Line Industries and others	单一OEM厂商
环境影响	延长设备使用寿命，减少浪费	新原材料消耗

Advantages of Buying Used Holoflite & Screw Dryers from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver holoflite & screw dryers ready for your process.

显著节省成本

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

立即可用

In-stock holoflite & screw dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom-manufactured new equipment with 12–16 week average delivery.

多家OEM制造商

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz and other manufacturers. Every unit is an original OEM product with traceable provenance.

质量与翻新

IPP 通过其成立于 1995 年的 UGE（通用钢制设备）部门提供翻新服务，该部门库存有 700 多台船舶和 2700 多个零件。.

全球业务遍及15个国家

IPP在15个国家设有办事处：巴西、加拿大、中国、捷克、法国、德国、印度、意大利、墨西哥、巴基斯坦、葡萄牙、罗马尼亚、土耳其、英国和美国。IPP已为全球超过16万名客户提供服务。.

全系列材料及规格

IPP stocks holoflite & screw dryers across a wide range of specifications to match your process requirements.

How Buying a Used Holoflite & Screw Dryer Works

The process of purchasing used holoflite & screw dryers from IPP follows five steps, from specification to delivery.

1

提交要求

请提供您的具体规格：容量、材质、压力等级、温度范围和应用领域。或者浏览我们可搜索的库存产品。.

2

接收数据包

IPP会发送一份详细的设备数据表，其中包含规格、尺寸、状况报告和照片。.

3

检查设备

联系 IPP 安排现场考察，或请求与 IPP 专家在我们全球某个办事处进行实时视频导览。.

4

翻新选项

IPP通过其UGE部门提供翻新服务（库存超过700艘船舶和2700多种零部件）。如需了解更多服务详情，请联系IPP。.

5

包装和配送

IPP负责协调包装、装箱、运输和送货至您的工厂。我们在15个国家设有办事处，提供全球配送服务。.

Industries That Buy Used Holoflite & Screw Dryers

IPP supplies used holoflite & screw dryers to manufacturers across multiple process industries worldwide.

制药

化学加工

食品和饮料

生物技术

农用化学品

精细化学品

采矿与矿产

化妆品

油漆和涂料

石化产品

Frequently Asked Questions About Buying Used Holoflite & Screw Dryers

Answers to the most common questions from procurement and operations teams evaluating used holoflite and screw dryers.

How many holoflite & screw dryers does IPP have in stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Available in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Browse the IMS inventory for current availability.

What condition grades are available for used holoflite & screw dryers?

IPP stocks holoflite & screw dryers in multiple conditions: Used. 浏览当前库存，查看可用的商品状况选项。.

Does IPP sell new holoflite & screw dryers as well as used?

是的。 IPP stocks new holoflite & screw dryers through its Gale Process Solutions (GPS) subsidiary, which provides custom-manufactured equipment with 12–16 week average delivery. 请联系IPP了解新库存详情。.

有哪些建筑材料可供选择？

IPP stocks holoflite & screw dryers in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. 请联系IPP公司，讨论您的应用所需的材料要求。.

What manufacturers of holoflite & screw dryers does IPP stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. 浏览当前库存，查看可供选择的制造商。.

How much can I save buying used holoflite & screw dryers versus new?

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. 具体节省金额取决于制造商、产能、结构材料和设备状况。请联系 IPP 获取具体设备的价格信息。.

How long does it take to receive holoflite & screw dryers from IPP?

In-stock holoflite & screw dryers are ready to ship. IPP's GPS subsidiary provides new custom-manufactured equipment with 12–16 week average delivery. IPP在全球15个国家设有办事处，并负责产品发货。.

IPP是否负责运输和货运？

IPP负责协调包装、装箱、运输和送货到您的工厂现场。. 在15个国家设有办事处和全球服务客户超过16万。, IPP在全球设备物流方面拥有丰富的经验。.

IPP的其他零部件及设备

In addition to holoflite & screw dryers, IPP stocks equipment across multiple categories for complete process solutions.

过滤器

离心机

热交换器

Looking for New Holoflite & Screw Dryers?

IPP集团通过其子公司Gale Process Solutions (GPS)供应新设备，该公司提供定制设备，平均交货期为12-16周。IPP还通过其UGE（Universal Glasteel Equipment）部门提供玻璃钢翻新设备。.

Ready to Buy Holoflite & Screw Dryers?

自 1980 年以来，IPP 一直致力于为全球客户提供优质的工艺设备，服务客户超过 16 万家。请告诉我们您的需求，我们的团队将为您提供匹配的库存和报价。.