فروخت کے لیے استعمال شدہ بیچ ٹائپ ایگیٹیڈ ری ایکٹر خریدیں۔

Buying used batch-type body-only reactors through International Process Plants gives pharmaceutical, chemical processing, biotech, food and beverage, and cosmetics manufacturers access to bare jacketed pressure vessels delivered without an agitator drive, shaft, or impeller assembly from Pfaudler, DeDietrich, UGE, EHW Thale, and additional OEM manufacturers. ▶
Capacities span 15 L (4 gallons) shop-test bodies and 37.9 L (10 gallons) pilot vessels up to a 30,300 L (8,000 gallons) DeDietrich SA shell. Internal pressure ratings extend from 0.14 bar (2 psi) atmospheric service through 20.7 bar (300 psi) on a DeDietrich CTJ glass-lined vessel. Internal temperature envelopes reach 260 degrees C (500 degrees F) on the largest glass-lined Pfaudler and DeDietrich shells. Internal full vacuum capability is available across the inventory. Support configurations are split between leg-mounted and lug-mounted skirts depending on installation footprint.

Pfaudler bodies are stocked across the RA, RS, P, E, ELL, KC, and KA series. DeDietrich bodies span the SA, CTJ, CE, STU, and CSA series. Universal Glasteel Equipment (UGE) supplies factory-new bodies across the UA-300, UA-500, UA-1000, UA-2000, and UA-4000 ranges plus the Base UT-30, UT-50, UT-100, and UT-200 base series. Condition grades on offer cover re-glassed, good used, factory-new, needs-reglass, and unused-surplus stock. Jacket configurations include standard heat-transfer jackets and half-pipe (limpet) coil jackets. All vessels are offered as ASME-coded, National Board, CRN, CE-marked, or PED compliant where the original code stamp permits. Buying used batch-type body-only reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

150+

اسٹاک میں ری ایکٹر

1980

سے قائم ہے۔

15

دفاتر والے ممالک

Re-Glassed Bodies

Pfaudler & DeDietrich shells

New Bodies from UGE

Factory-new glass-lined stock

All Body-Only Vessels

15 L to 30,300 L capacity range

Stainless Steel 316 Clad Batch-Type Agitated Reactor, IPP stock number 212456
IPP# 212456

Stainless Steel 316 Clad Batch-Type Agitated Reactor

29,800 L
12.5 bar  ·  80 °C  ·  سٹینلیس سٹیل 316
شیشے والا Pfaudler RA صرف بیچ کی قسم باڈی Reactor, IPP stock number 235532
IPP# 235532

شیشے والا Pfaudler RA صرف بیچ کی قسم باڈی Reactor

22,712 L
6.9 bar  ·  450 °C  ·  شیشے والا
شیشے والا Pfaudler RA صرف بیچ کی قسم باڈی Reactor, IPP stock number 230162
IPP# 230162

شیشے والا Pfaudler RA صرف بیچ کی قسم باڈی Reactor

18,927 L
6.9 bar  ·  450 °C  ·  شیشے والا
شیشے والا Pfaudler K صرف بیچ کی قسم باڈی Reactor, IPP stock number 235740
IPP# 235740

شیشے والا Pfaudler K صرف بیچ کی قسم باڈی Reactor

15,142 L
6.9 bar  ·  450 °C  ·  شیشے والا
316 stainless steel Reactor Batch Type Body, IPP stock number 247255
IPP# 247255

316 stainless steel Reactor Batch Type Body

14,952 L
6.2 bar  ·  392 °C  ·  سٹینلیس سٹیل
شیشے والا Pfaudler RS صرف بیچ کی قسم باڈی Reactor, IPP stock number 241062
IPP# 241062

شیشے والا Pfaudler RS صرف بیچ کی قسم باڈی Reactor

11,350 L
10.3 bar  ·  450 °C  ·  شیشے والا

Buy Used Batch-Type Body-Only Reactors for Sale by Manufacturer

IPP stocks batch-type body-only reactor vessels from a wide range of OEM brands, with Pfaudler and DeDietrich representing the deepest single-manufacturer positions in the inventory. Buying a body shell from the original equipment manufacturer simplifies retrofit drive sizing, replacement-glass scheduling, and code documentation continuity.

Buy Used Pfaudler Body-Only Reactors for Sale

Pfaudler is the deepest single-OEM position in IPP’s batch-type body-only inventory. Body shells are stocked across the RA, RS, P, E, ELL, KC, and KA series in re-glassed, used, unused, and needs-reglass conditions.

Pfaudler RS — 22,700 L

Re-glassed Pfaudler RS glass-lined reactor body. 22,700 L (6,000 gallons) capacity at 8.6 bar (125 psi) and 232.2 degrees C (450 degrees F).

صلاحیت (ڈیزائن): 22,700 L (6,000 gallons) capacity

اندرونی دباؤ: 8.6 bar (125 psi)

اندرونی درجہ حرارت: 232.2 degrees C (450 degrees F)

مواد: شیشے کی لکیر والی تعمیر

قطر: 2,750 mm (108.3 in)

سیدھی طرف کی لمبائی: 3,300 mm (129.9 in) shell

حالت: دوبارہ شیشے کی حالت

Support Type: leg-mounted

Pfaudler KC — 18,950 L

Unused Pfaudler KC glass-lined reactor body. 18,950 L (5,000 gallons) capacity rated to 6.2 bar (90 psi) and 204.4 degrees C (400 degrees F) with full vacuum capability.

صلاحیت (ڈیزائن):18,950 L (5,000 gallons) capacity

اندرونی دباؤ:6.2 بار (90 psi)

اندرونی درجہ حرارت:204.4 degrees C (400 degrees F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

قطر:2,750 mm (108.3 in)

سیدھی طرف کی لمبائی:4,550 mm (179.1 in) shell

حالت: غیر استعمال شدہ حالت

Support Type: leg-mounted

Pfaudler RS — 11,350 L

Used Pfaudler RS glass-lined reactor body. 11,350 L (3,000 gallons) capacity rated to 10.3 bar (150 psi) and 232.2 degrees C (450 degrees F).

صلاحیت (ڈیزائن):11,350 L (3,000 gallons) capacity

اندرونی دباؤ:10.3 بار (150 psi)

اندرونی درجہ حرارت:232.2 degrees C (450 degrees F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

قطر:2,450 mm (96.5 in)

سیدھی طرف کی لمبائی:1,850 mm (72.8 in) shell

حالت:استعمال شدہ حالت

Support Type:lug-mounted

Buy Used DeDietrich Body-Only Reactors for Sale

DeDietrich is the second deepest OEM position in IPP’s batch-type body-only inventory. Body shells span the SA, CTJ, CE, STU, and CSA series across re-glassed and needs-reglass condition grades.

DeDietrich SA — 30,300 L

Needs-reglass DeDietrich SA glass-lined reactor body. 30,300 L (8,000 gallons) capacity rated to 6.9 bar (100 psi) and 260 degrees C (500 degrees F) — the largest body shell in IPP inventory.

صلاحیت (ڈیزائن):30,300 L (8,000 gallons) capacity

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:260 degrees C (500 degrees F)

قطر:3,050 ملی میٹر (120.1 انچ)

سیدھی طرف کی لمبائی:3,650 mm (143.7 in) shell

حالت:Needs reglass condition

Support Type:Lug-mounted

DeDietrich SA — 3,800 L

Re-glassed DeDietrich SA glass-lined reactor body. 3,800 L (1,000 gallons) capacity rated to 6.9 bar (100 psi) and 260 degrees C (500 degrees F) with full vacuum capability.

صلاحیت (ڈیزائن):3,800 L (1,000 gallons) capacity

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:260 degrees C (500 degrees F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

قطر:1,600 ملی میٹر (63 انچ)

سیدھی طرف کی لمبائی:1,850 mm (72.8 in) shell

حالت:Re-glassed

Support Type:leg-mounted

New equipment — custom built

DeDietrich CTJ — 189.3 L

Re-glassed DeDietrich CTJ glass-lined reactor body. 189.3 L (50 gallons) capacity rated to 20.7 bar (300 psi) — the highest internal pressure rating in IPP inventory.

صلاحیت (ڈیزائن):189.3 L (50 gallons) capacity

اندرونی دباؤ:20.7 bar (300 psi) pressure rating

اندرونی درجہ حرارت:204.4 degrees C (400 degrees F)

قطر:889 mm (35 in)

سیدھی طرف کی لمبائی:737 mm (29 in) shell

حالت:Re-glassed

Support Type:leg-mounted

New equipment — custom built

Buy Body-Only Reactors from Other Manufacturers

Beyond Pfaudler and DeDietrich, IPP stocks body-only reactor shells from Universal Glasteel Equipment (UGE), EHW Thale, Schwelm, Glasscote, Redicon, Portobello Fabrications, Balfour, and Lampart. UGE is an IPP subsidiary that supplies factory-new glass-lined bodies under the IPP umbrella.

UGE UA-1000 — 3,800 L

New UGE UA-1000 glass-lined reactor body. 3,800 L (1,000 gallons) capacity rated to 6.9 bar (100 psi) and 232.2 degrees C (450 degrees F) with factory-new glass lining.

صلاحیت (ڈیزائن):3,800 L (1,000 gallons) capacity

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:232.2 degrees C (450 degrees F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

قطر:1,500 mm (59.1 in)

سیدھی طرف کی لمبائی:2,250 mm (88.6 in) shell

حالت:نئی حالت

Support Type:leg-mounted

New equipment — in stock

EHW Thale — 5,700 L

Re-glassed EHW Thale glass-lined reactor body. 5,700 L (1,500 gallons) capacity rated to 6.9 bar (100 psi) and 232.2 degrees C (450 degrees F).

صلاحیت (ڈیزائن):5,700 L (1,500 gallons) capacity

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:232.2 degrees C (450 degrees F)

قطر:2,000 ملی میٹر (78.7 انچ)

سیدھی طرف کی لمبائی:1,500 mm (59.1 in) shell

حالت:دوبارہ شیشے کی حالت

Support Type:Leg-mounted

Portobello Fabrications — 14,950 L

Used Portobello Fabrications LTD. stainless steel 316L reactor body. 14,950 L (3,950 gallons) capacity rated to 6.2 bar (90.1 psi) and 200 degrees C (392 degrees F) — an alloy alternative to glass-lined construction.

صلاحیت (ڈیزائن):14,950 L (3,950 gallons) capacity

اندرونی دباؤ:6.2 bar (90.1 psi)

اندرونی درجہ حرارت:200 degrees C (392 degrees F)

مواد:سٹینلیس سٹیل 316L

قطر:2,400 mm (94.5 in)

سیدھی طرف کی لمبائی:2,500 mm (98.4 in) shell

حالت:استعمال شدہ حالت

Support Type:lug-mounted

Buy Used Batch-Type Body-Only Reactors for Sale by Condition

IPP stocks batch-type body-only reactor vessels in re-glassed, used, factory-new, needs-reglass, and unused-surplus condition grades. Choose the condition that matches your budget, timeline, and glass-lining requirements.

Buy Re-Glassed Reactor Bodies

IPP stocks re-glassed batch type body only reactor vessels. Re-glassing is performed by IPP’s UGE (Universal Glasteel Equipment) division, which stocks 700+ vessels and 2,700+ parts. Re-glassed reactor bodies receive new glass linings with full fire polish and very clean glass condition on existing OEM vessels. These vessels offer restored corrosion protection at significant savings compared to new OEM equipment.

DeDietrich SA — 3,800 L

Re-glassed DeDietrich SA glass-lined reactor body. 3,800 L (1,000 gal) capacity with full vacuum capability, full fire polish, and very clean glass condition.

صلاحیت (ڈیزائن):3,800 L (1,000 gal) گنجائش

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:260°C (500°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

گلاس فائر پولش:Full Fire Polish

شیشے کی حالت:Very Clean glass

قطر:1,600 ملی میٹر (63 انچ)

سیدھی طرف کی لمبائی:1,850 mm (72.8 in)

Support Type:ٹانگیں

Pfaudler ELL — 1,900 L

Re-glassed Pfaudler ELL glass-lined reactor body. 1,900 L (500 gal) capacity with full vacuum, full fire polish, and very clean glass condition.

صلاحیت (ڈیزائن):1,900 L (500 gal) گنجائش

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:176.7°C (350°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

گلاس فائر پولش:Full Fire Polish

شیشے کی حالت:Very Clean glass

قطر:1,500 mm (59.1 in)

سیدھی طرف کی لمبائی:914 mm (36 in)

Support Type:ٹانگیں

Pfaudler RS — 7,550 L

Re-glassed Pfaudler RS glass-lined reactor body. 7,550 L (2,000 gal) capacity with full vacuum, full fire polish, and very clean glass condition.

صلاحیت (ڈیزائن):7,550 L (2,000 gal) گنجائش

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:232.2°C (450°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

گلاس فائر پولش:Full Fire Polish

شیشے کی حالت:Very Clean glass

قطر:2,000 ملی میٹر (78.7 انچ)

سیدھی طرف کی لمبائی:2,050 mm (80.7 in)

Support Type:Lugs

Buy Used Reactor Bodies for Sale

IPP stocks used batch type body only reactor vessels. Used reactor bodies are available from Pfaudler, DeDietrich, and other manufacturers. Used vessels retain existing glass linings with varying degrees of fire polish. Good used condition offers the lowest price point while providing OEM-quality vessel shells that can serve as replacement bodies or accept new agitation systems.

Pfaudler RS — 7,550 L

Used Pfaudler RS glass-lined reactor body. 7,550 L (2,000 gal) capacity with 10.3 bar (150 psi) pressure rating and full vacuum capability.

صلاحیت (ڈیزائن):7,550 L (2,000 gal) گنجائش

اندرونی دباؤ:10.3 بار (150 psi)

اندرونی درجہ حرارت:232.2°C (450°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

گلاس فائر پولش:Some Fire Polish

شیشے کی حالت:Dirty (light cleaning)

قطر:2,000 ملی میٹر (78.7 انچ)

سیدھی طرف کی لمبائی:2,050 mm (80.7 in)

Support Type:Lugs

نیچے کے سر کی قسم:Elliptical

Pfaudler RS — 11,350 L

Used Pfaudler RS glass-lined reactor body. 11,350 L (3,000 gal) capacity with 10.3 bar (150 psi) pressure rating and full vacuum capability.

صلاحیت (ڈیزائن):11,350 L (3,000 gal) گنجائش

اندرونی دباؤ:10.3 بار (150 psi)

اندرونی درجہ حرارت:232.2°C (450°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

گلاس فائر پولش:Some Fire Polish

شیشے کی حالت:Clean glass

قطر:2,450 mm (96.5 in)

سیدھی طرف کی لمبائی:1,850 mm (72.8 in)

Support Type:Lugs

نیچے کے سر کی قسم:Elliptical

Pfaudler KA — 7,550 L

Used Pfaudler KA glass-lined reactor body. 7,550 L (2,000 gal) capacity with sanitary construction, full vacuum capability, and sanitary jacket shroud.

صلاحیت (ڈیزائن):7,550 L (2,000 gal) گنجائش

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:232.2°C (450°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم

سینیٹری کی تعمیر:sanitary construction

Sanitary Jacket Shroud:Sanitary jacket shroud

قطر:2,000 ملی میٹر (78.7 انچ)

سیدھی طرف کی لمبائی:2,200 ملی میٹر (86.6 انچ)

Support Type:Lugs

Buy New Reactor Bodies from UGE

IPP stocks new glass-lined reactor bodies from Universal Glasteel Equipment (UGE). UGE is IPP’s glass-lined equipment subsidiary, founded in 1995. New UGE reactor bodies ship with factory-new glass linings and immediate availability from stock. These vessels provide new-equipment glass quality without extended OEM lead times.

UGE UA-300 — 1,150 L

New UGE UA-300 glass-lined reactor body. 1,150 L (300 gal) capacity with full vacuum capability and factory-new glass lining.

صلاحیت (ڈیزائن):1,150 L (300 gal) صلاحیت

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:232.2°C (450°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

گلاس فائر پولش:نیا گلاس

شیشے کی حالت:factory condition

قطر:1,200 mm (47.2 in)

سیدھی طرف کی لمبائی:1,200 mm (47.2 in)

Support Type:ٹانگیں

New equipment — in stock

UGE UA-500 — 1,900 L

New UGE UA-500 glass-lined reactor body. 1,900 L (500 gal) capacity with full vacuum capability and factory-new glass lining.

صلاحیت (ڈیزائن):1,900 L (500 gal) گنجائش

اندرونی دباؤ:6.9 بار (100 psi)

اندرونی درجہ حرارت:232.2°C (450°F)

اندرونی مکمل ویکیوم:مکمل ویکیوم قابل

گلاس فائر پولش:نیا گلاس

شیشے کی حالت:factory condition

قطر:1,200 mm (47.2 in)

سیدھی طرف کی لمبائی:1,500 mm (59.1 in)

Support Type:ٹانگیں

New equipment — in stock

Buy Reactor Bodies That Need Reglass

IPP stocks batch type body only reactor vessels in needs-reglass condition. These vessels have OEM-quality metal shells with glass linings that require replacement. IPP offers re-glassing services through its UGE division. Purchasing a needs-reglass vessel and re-glassing through UGE can provide the lowest total cost for a fully restored reactor body.

Needs Reglass Vessels Available

IPP stocks reactor bodies in needs-reglass condition from Pfaudler, DeDietrich, and EHW Thale. These vessels are priced at the lowest cost point and can be re-glassed through UGE to restore full glass-lining performance.

26 vessels in stock

Pfaudler, DeDietrich, EHW Thale

Re-glassing available through UGE

Lowest cost entry point

Need a Reactor Body? Ask an IPP Expert.

Tell us your capacity, pressure, and temperature requirements. Our team will match your specifications against current body only reactor inventory and provide a detailed quote.

Comparing Reactor Body Condition Options

IPP stocks body only reactor vessels across four primary conditions. Here is how re-glassed, new, used, and needs-reglass reactor bodies compare across key factors.
عامل دوبارہ شیشے والا New (UGE) استعمال کیا جاتا ہے Needs Reglass
سامان کی قیمت Moderate — savings vs new OEM Higher — factory-new glass Lowest ready-to-use cost Lowest vessel cost + reglass fee
Glass Lining Quality Full Fire Polish, Very Clean Factory-new glass Varies — Some Fire Polish to Clean Requires new glass lining
لیڈ ٹائم In stock — ready to ship In stock — ready to ship In stock — ready to ship Requires re-glassing lead time
اسٹاک میں یونٹس 61 vessels 27 vessels 46 vessels 26 vessels
کے لیے بہترین Replacement vessels needing clean glass New installations requiring factory glass Budget-conscious replacements Lowest total cost with UGE re-glass
مینوفیکچررز Pfaudler, DeDietrich UGE (IPP subsidiary) Pfaudler, DeDietrich, others Pfaudler, DeDietrich, EHW Thale

Advantages of Buying Used Reactor Bodies from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and 172 body only reactor vessels in stock to deliver reactor shells ready for your process.

اہم لاگت کی بچت

Buying used batch type body only reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. Body only vessels offer additional savings over complete reactor systems because the agitation system is excluded from the purchase.

Replacement Vessel Flexibility

Body only reactor vessels serve as direct replacement shells for existing reactor installations. Buyers can reuse their existing agitation system, drive assembly, and mechanical seal with a new or re-glassed vessel body.

Re-Glassed to Factory Spec

IPP offers re-glassed reactor bodies through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts. 61 re-glassed bodies are in stock with full fire polish and very clean glass condition.

Top OEM Manufacturers in Stock

IPP stocks reactor bodies from Pfaudler, DeDietrich, UGE, EHW Thale, and Schwelm. Every unit is an original OEM product with traceable provenance. DeDietrich (France) and EHW Thale (Germany) represent European OEM manufacturing.

15 ممالک میں عالمی موجودگی

آئی پی پی 15 ممالک میں دفاتر چلاتا ہے: برازیل، کینیڈا، چین، جمہوریہ چیک، فرانس، جرمنی، بھارت، اٹلی، میکسیکو، پاکستان، پرتگال، رومانیہ، ترکی، برطانیہ، اور امریکہ۔ آئی پی پی نے دنیا بھر میں 160,000+ صارفین کی خدمت کی ہے۔.

Full Range of Sizes & Specs

Volume capacity ranges from 15 L (4 gal) to 30,300 L (8,000 gal). Pressure ratings range from 0.14 bar (2 psi) to 20.7 bar (300 psi). Temperature ratings range from 40°C (104°F) to 343.3°C (650°F). Support types include legs, lugs, and ring. Bottom head types include dish, elliptical, flat (1 unit), and cone (1 unit).

استعمال شدہ ری ایکٹر باڈی خریدنا کیسے کام کرتا ہے۔

آئی پی پی سے استعمال شدہ ری ایکٹر باڈی خریدنے کا عمل تصریح سے لے کر ترسیل تک پانچ مراحل کی پیروی کرتا ہے۔.

1

تقاضے جمع کروائیں۔

Share your reactor body specifications: capacity, pressure rating, temperature, dimensions, and whether you need a replacement body for an existing system or a vessel for a new agitator.

2

ڈیٹا پیکیج وصول کریں۔

IPP sends a detailed equipment data sheet with capacity, pressure rating, temperature, dimensions, nozzle schedule, glass condition report, and photographs of the vessel.

3

Verify Compatibility

The IPP team helps verify that the body dimensions, nozzle layout, and mounting configuration are compatible with your existing agitation system or planned installation.

4

Re-Glassing Options

IPP offers re-glassing through its UGE division (700+ vessels, 2,700+ parts in stock). Used or needs-reglass vessels can be fully restored before shipment.

5

پیکیجنگ اور ترسیل

IPP پیکیجنگ، کریٹنگ، فریٹ، اور آپ کے پلانٹ کی جگہ پر ترسیل کو مربوط کرتا ہے۔ 15 ممالک میں دفاتر سے دنیا بھر میں شپنگ۔ شپنگ کی تفصیلات کے لیے آئی پی پی سے رابطہ کریں۔.

Industries That Buy Used Reactor Bodies

IPP supplies used batch type body only reactor vessels to manufacturers across multiple process industries worldwide.

فارماسیوٹیکل

کیمیکل پروسیسنگ

بائیو ٹیکنالوجی

خوراک اور مشروبات

کاسمیٹکس

عمدہ کیمیکل

زرعی کیمیکل

پولیمر اور ریزن

پینٹ اور کوٹنگز

پیٹرو کیمیکل

Frequently Asked Questions About Purchasing Reactor Bodies

Answers to the most common questions from procurement and operations teams evaluating used batch type body only reactor vessels.

IPP stocks batch type body only reactor vessels. The largest manufacturer positions are Pfaudler, DeDietrich, and UGE. Volume capacity ranges from 15 L (4 gal) to 30,300 L (8,000 gal). موجودہ دستیابی کے لیے IMS انوینٹری کو براؤز کریں۔.

A body only reactor is a reactor vessel shell sold without an agitation system. The vessel includes the reactor body, jacket, nozzles, manway, and support structure, but does not include an agitator, drive assembly, motor, or mechanical seal. Buyers typically purchase body only vessels as replacement shells for existing reactors, or to install their own agitation system.

Purchasing used batch type body only reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on manufacturer, capacity, and condition. IPP provides detailed quotes with full specification matching on request. Contact IPP for pricing on specific units from our current reactor body inventory.

IPP stocks reactor bodies from 19 manufacturers. The largest inventory positions are Pfaudler, DeDietrich, UGE, EHW Thale, and Schwelm. Pfaudler, DeDietrich (France), and EHW Thale (Germany) represent major international glass-lined equipment manufacturers.

جی ہاں IPP stocks new glass-lined reactor bodies from its UGE (Universal Glasteel Equipment) subsidiary. UGE was founded in 1995 and provides glass-lined equipment through the IPP Group. IPP also stocks unused surplus reactor bodies — manufactured but never installed — offering new-equipment performance with immediate availability.

IPP stocks reactor bodies in five conditions: re-glassed, used, new from UGE, needs reglass, and unused surplus. Re-glassed reactor bodies have received new borosilicate glass linings through IPP's UGE division. Unused reactor bodies were manufactured but never installed in a process.

A re-glassed reactor body has received a new borosilicate glass lining on the original OEM vessel shell. IPP اپنے UGE (یونیورسل Glasteel Equipment) ڈویژن کے ذریعے دوبارہ گلاسنگ کی خدمات پیش کرتا ہے، جس کی بنیاد 1995 میں رکھی گئی تھی، جس میں 700+ برتن اور 2,700+ حصوں کا ذخیرہ ہے۔. Re-glassed bodies in IPP inventory show full fire polish (FF) and very clean (VC) glass condition ratings.

IPP reports glass condition grades on each reactor body listing. Grades include Very Clean (VC), Clean (C), Dirty (D) meaning light cleaning needed, and New for factory-new UGE vessels. Glass fire polish grades include Full Fire Polish (FF), Some Fire Polish (F), and New. These condition ratings help buyers assess glass lining quality before purchasing.

IPP stocks body only reactor vessels primarily in glass-lined construction (166 of 172 units, or 96.5%). Additional units are available in stainless steel 316, stainless steel 316L (1 unit), stainless steel austenitic (1 unit), and Hastelloy (1 unit). Glass-lined construction provides corrosion resistance for pharmaceutical, chemical, and specialty manufacturing processes.

جی ہاں Body only reactor vessels are sold without an agitation system. Each vessel listing includes a nozzle schedule that specifies the drive nozzle size and location for mounting an agitator. For example, IPP# 246494 (UGE UA-300) specifies a 4 3/8” agitator nozzle. Buyers can mount their own agitator, reuse an existing drive assembly, or source a new agitation system to fit the vessel nozzle configuration.

Pfaudler reactor bodies include drive nozzles with standardized dimensions listed in the nozzle schedule. Compatibility with other manufacturers' agitators depends on matching the drive nozzle diameter, flange pattern, and vessel geometry. The IPP team can help verify compatibility for specific body and agitator combinations. Contact IPP with your existing agitator specifications for a compatibility assessment.

IPP's Gale Process Solutions (GPS) subsidiary provides custom fabricated equipment. Contact IPP to discuss sourcing a matched reactor body and agitation system together.

Each reactor body listing in IPP inventory includes a detailed nozzle schedule specifying the number, size, and location of all vessel openings. Typical nozzle schedules include manway openings (12” to 18”), process nozzles (2” to 10”), drive nozzles (4 3/8”), and bottom outlet nozzles. Contact IPP with your required nozzle configuration for specific recommendations.

IPP stocks reactor bodies with three support types: legs, lugs, and ring supports. The support type determines how the vessel is mounted in your plant. Leg-supported vessels stand on the floor, while lug-supported vessels are mounted from above on structural steel. Contact IPP to find reactor bodies matching your plant's mounting configuration.

Looking for Complete Agitated Reactors?

IPP also stocks batch-type agitated reactors — complete reactor systems with agitation, drive assembly, motor, and mechanical seal included. IPP offers used and glass-lined process equipment through UGE, and new stainless steel and alloy equipment through GPS, available as both stocked and custom-fabricated solutions.

Ready to Buy a Reactor Body?

آئی پی پی نے 1980 سے دنیا بھر میں معیاری عمل کا سامان فراہم کیا ہے، جو 160,000+ صارفین کی خدمت کر رہا ہے۔ ہمیں بتائیں کہ آپ کو کیا چاہیے — ہماری ٹیم مماثل انوینٹری اور قیمتوں کے ساتھ جواب دے گی۔.