出售二手间歇式搅拌反应器
Buying used batch-type body-only reactors through International Process Plants gives pharmaceutical, chemical processing, biotech, food and beverage, and cosmetics manufacturers access to bare jacketed pressure vessels delivered without an agitator drive, shaft, or impeller assembly from Pfaudler, DeDietrich, UGE, EHW Thale, and additional OEM manufacturers.
Capacities span 15 L (4 gallons) shop-test bodies and 37.9 L (10 gallons) pilot vessels up to a 30,300 L (8,000 gallons) DeDietrich SA shell. Internal pressure ratings extend from 0.14 bar (2 psi) atmospheric service through 20.7 bar (300 psi) on a DeDietrich CTJ glass-lined vessel. Internal temperature envelopes reach 260 degrees C (500 degrees F) on the largest glass-lined Pfaudler and DeDietrich shells. Internal full vacuum capability is available across the inventory. Support configurations are split between leg-mounted and lug-mounted skirts depending on installation footprint.
Pfaudler bodies are stocked across the RA, RS, P, E, ELL, KC, and KA series. DeDietrich bodies span the SA, CTJ, CE, STU, and CSA series. Universal Glasteel Equipment (UGE) supplies factory-new bodies across the UA-300, UA-500, UA-1000, UA-2000, and UA-4000 ranges plus the Base UT-30, UT-50, UT-100, and UT-200 base series. Condition grades on offer cover re-glassed, good used, factory-new, needs-reglass, and unused-surplus stock. Jacket configurations include standard heat-transfer jackets and half-pipe (limpet) coil jackets. All vessels are offered as ASME-coded, National Board, CRN, CE-marked, or PED compliant where the original code stamp permits. Buying used batch-type body-only reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new.
150+
现货反应堆
1980
自成立以来
15
设有办事处的国家/地区
Re-Glassed Bodies
Pfaudler & DeDietrich shells
New Bodies from UGE
Factory-new glass-lined stock
All Body-Only Vessels
15 L to 30,300 L capacity range
Buy Used Batch-Type Body-Only Reactors for Sale by Manufacturer
Buy Used Pfaudler Body-Only Reactors for Sale
Pfaudler RS — 22,700 L
Re-glassed Pfaudler RS glass-lined reactor body. 22,700 L (6,000 gallons) capacity at 8.6 bar (125 psi) and 232.2 degrees C (450 degrees F).
容量（设计）： 22,700 L (6,000 gallons) capacity
内部压力： 8.6 bar (125 psi)
内部温度： 232.2 degrees C (450 degrees F)
材料： 玻璃内衬结构
直径： 2,750 mm (108.3 in)
直边长度： 3,300 mm (129.9 in) shell
健康）状况： 重新玻璃化状态
支持类型： leg-mounted
Pfaudler KC — 18,950 L
Unused Pfaudler KC glass-lined reactor body. 18,950 L (5,000 gallons) capacity rated to 6.2 bar (90 psi) and 204.4 degrees C (400 degrees F) with full vacuum capability.
容量（设计）：18,950 L (5,000 gallons) capacity
内部压力：6.2 巴（90 磅/平方英寸）
内部温度：204.4 degrees C (400 degrees F)
内部完全真空：具备完全真空能力
直径：2,750 mm (108.3 in)
直边长度：4,550 mm (179.1 in) shell
健康）状况： 全新未使用状态
支持类型： leg-mounted
Pfaudler RS — 11,350 L
Used Pfaudler RS glass-lined reactor body. 11,350 L (3,000 gallons) capacity rated to 10.3 bar (150 psi) and 232.2 degrees C (450 degrees F).
容量（设计）：11,350 L (3,000 gallons) capacity
内部压力：10.3 巴（150 磅/平方英寸）
内部温度：232.2 degrees C (450 degrees F)
内部完全真空：具备完全真空能力
直径：2,450 毫米（96.5 英寸）
直边长度：1,850 mm (72.8 in) shell
健康）状况：二手
支持类型：lug-mounted
Buy Used DeDietrich Body-Only Reactors for Sale
DeDietrich SA — 30,300 L
Needs-reglass DeDietrich SA glass-lined reactor body. 30,300 L (8,000 gallons) capacity rated to 6.9 bar (100 psi) and 260 degrees C (500 degrees F) — the largest body shell in IPP inventory.
容量（设计）：30,300 L (8,000 gallons) capacity
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：260 degrees C (500 degrees F)
直径：3,050 mm (120.1 in)
直边长度：3,650 mm (143.7 in) shell
健康）状况：Needs reglass condition
支持类型：Lug-mounted
DeDietrich SA — 3,800 L
Re-glassed DeDietrich SA glass-lined reactor body. 3,800 L (1,000 gallons) capacity rated to 6.9 bar (100 psi) and 260 degrees C (500 degrees F) with full vacuum capability.
容量（设计）：3,800 L (1,000 gallons) capacity
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：260 degrees C (500 degrees F)
内部完全真空：具备完全真空能力
直径：1,600 毫米（63 英寸）
直边长度：1,850 mm (72.8 in) shell
健康）状况：重新玻璃化
支持类型：leg-mounted
新设备——定制制造
DeDietrich CTJ — 189.3 L
Re-glassed DeDietrich CTJ glass-lined reactor body. 189.3 L (50 gallons) capacity rated to 20.7 bar (300 psi) — the highest internal pressure rating in IPP inventory.
容量（设计）：189.3 L (50 gallons) capacity
内部压力：20.7 bar (300 psi) pressure rating
内部温度：204.4 degrees C (400 degrees F)
直径：889 mm (35 in)
直边长度：737 mm (29 in) shell
健康）状况：重新玻璃化
支持类型：leg-mounted
新设备——定制制造
Buy Body-Only Reactors from Other Manufacturers
UGE UA-1000 — 3,800 L
New UGE UA-1000 glass-lined reactor body. 3,800 L (1,000 gallons) capacity rated to 6.9 bar (100 psi) and 232.2 degrees C (450 degrees F) with factory-new glass lining.
容量（设计）：3,800 L (1,000 gallons) capacity
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：232.2 degrees C (450 degrees F)
内部完全真空：具备完全真空能力
直径：1,500 mm (59.1 in)
直边长度：2,250 mm (88.6 in) shell
健康）状况：全新
支持类型：leg-mounted
New equipment — in stock
EHW Thale — 5,700 L
Re-glassed EHW Thale glass-lined reactor body. 5,700 L (1,500 gallons) capacity rated to 6.9 bar (100 psi) and 232.2 degrees C (450 degrees F).
容量（设计）：5,700 L (1,500 gallons) capacity
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：232.2 degrees C (450 degrees F)
直径：2,000 毫米（78.7 英寸）
直边长度：1,500 mm (59.1 in) shell
健康）状况：重新玻璃化状态
支持类型：Leg-mounted
Portobello Fabrications — 14,950 L
Used Portobello Fabrications LTD. stainless steel 316L reactor body. 14,950 L (3,950 gallons) capacity rated to 6.2 bar (90.1 psi) and 200 degrees C (392 degrees F) — an alloy alternative to glass-lined construction.
容量（设计）：14,950 L (3,950 gallons) capacity
内部压力：6.2 bar (90.1 psi)
内部温度：200 degrees C (392 degrees F)
材料：316L不锈钢
直径：2,400 mm (94.5 in)
直边长度：2,500 mm (98.4 in) shell
健康）状况：二手
支持类型：lug-mounted
Buy Used Batch-Type Body-Only Reactors for Sale by Condition
Buy Re-Glassed Reactor Bodies
DeDietrich SA — 3,800 L
Re-glassed DeDietrich SA glass-lined reactor body. 3,800 L (1,000 gal) capacity with full vacuum capability, full fire polish, and very clean glass condition.
容量（设计）：容量 3,800 升（1,000 加仑）
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：260°C (500°F)
内部完全真空：具备完全真空能力
玻璃火抛光：Full Fire Polish
玻璃状况：Very Clean glass
直径：1,600 毫米（63 英寸）
直边长度：1,850 mm (72.8 in)
支持类型：腿
Pfaudler ELL — 1,900 L
Re-glassed Pfaudler ELL glass-lined reactor body. 1,900 L (500 gal) capacity with full vacuum, full fire polish, and very clean glass condition.
容量（设计）：容量 1,900 升（500 加仑）
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：176.7°C (350°F)
内部完全真空：具备完全真空能力
玻璃火抛光：Full Fire Polish
玻璃状况：Very Clean glass
直径：1,500 mm (59.1 in)
直边长度：914 mm (36 in)
支持类型：腿
Pfaudler RS — 7,550 L
Re-glassed Pfaudler RS glass-lined reactor body. 7,550 L (2,000 gal) capacity with full vacuum, full fire polish, and very clean glass condition.
容量（设计）：容量 7,550 升（2,000 加仑）
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：232.2°C (450°F)
内部完全真空：具备完全真空能力
玻璃火抛光：Full Fire Polish
玻璃状况：Very Clean glass
直径：2,000 毫米（78.7 英寸）
直边长度：2,050 mm (80.7 in)
支持类型：凸耳
Buy Used Reactor Bodies for Sale
Pfaudler RS — 7,550 L
Used Pfaudler RS glass-lined reactor body. 7,550 L (2,000 gal) capacity with 10.3 bar (150 psi) pressure rating and full vacuum capability.
容量（设计）：容量 7,550 升（2,000 加仑）
内部压力：10.3 巴（150 磅/平方英寸）
内部温度：232.2°C (450°F)
内部完全真空：具备完全真空能力
玻璃火抛光：Some Fire Polish
玻璃状况：Dirty (light cleaning)
直径：2,000 毫米（78.7 英寸）
直边长度：2,050 mm (80.7 in)
支持类型：凸耳
Bottom Head Type:Elliptical
Pfaudler RS — 11,350 L
Used Pfaudler RS glass-lined reactor body. 11,350 L (3,000 gal) capacity with 10.3 bar (150 psi) pressure rating and full vacuum capability.
容量（设计）：容量：11,350 升（3,000 加仑）
内部压力：10.3 巴（150 磅/平方英寸）
内部温度：232.2°C (450°F)
内部完全真空：具备完全真空能力
玻璃火抛光：Some Fire Polish
玻璃状况：Clean glass
直径：2,450 毫米（96.5 英寸）
直边长度：1,850 mm (72.8 in)
支持类型：凸耳
Bottom Head Type:Elliptical
Pfaudler KA — 7,550 L
Used Pfaudler KA glass-lined reactor body. 7,550 L (2,000 gal) capacity with sanitary construction, full vacuum capability, and sanitary jacket shroud.
容量（设计）：容量 7,550 升（2,000 加仑）
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：232.2°C (450°F)
内部完全真空：完全真空
卫生建筑：sanitary construction
Sanitary Jacket Shroud:Sanitary jacket shroud
直径：2,000 毫米（78.7 英寸）
直边长度：2,200 毫米（86.6 英寸）
支持类型：凸耳
Buy New Reactor Bodies from UGE
UGE UA-300 — 1,150 L
New UGE UA-300 glass-lined reactor body. 1,150 L (300 gal) capacity with full vacuum capability and factory-new glass lining.
容量（设计）：容量 1,150 升（300 加仑）
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：232.2°C (450°F)
内部完全真空：具备完全真空能力
玻璃火抛光：新玻璃
玻璃状况：factory condition
直径：1,200 mm (47.2 in)
直边长度：1,200 mm (47.2 in)
支持类型：腿
New equipment — in stock
UGE UA-500 — 1,900 L
New UGE UA-500 glass-lined reactor body. 1,900 L (500 gal) capacity with full vacuum capability and factory-new glass lining.
容量（设计）：容量 1,900 升（500 加仑）
内部压力：6.9 巴（100 磅/平方英寸）
内部温度：232.2°C (450°F)
内部完全真空：具备完全真空能力
玻璃火抛光：新玻璃
玻璃状况：factory condition
直径：1,200 mm (47.2 in)
直边长度：1,500 mm (59.1 in)
支持类型：腿
New equipment — in stock
Buy Reactor Bodies That Need Reglass
Needs Reglass Vessels Available
IPP stocks reactor bodies in needs-reglass condition from Pfaudler, DeDietrich, and EHW Thale. These vessels are priced at the lowest cost point and can be re-glassed through UGE to restore full glass-lining performance.
26 vessels in stock
Pfaudler, DeDietrich, EHW Thale
Re-glassing available through UGE
Lowest cost entry point
Need a Reactor Body? Ask an IPP Expert.
Comparing Reactor Body Condition Options
| 因素 | 重新玻璃化 | New (UGE) | 用过的 | Needs Reglass |
|---|---|---|---|---|
| 设备成本 | Moderate — savings vs new OEM | Higher — factory-new glass | Lowest ready-to-use cost | Lowest vessel cost + reglass fee |
| Glass Lining Quality | Full Fire Polish, Very Clean | Factory-new glass | Varies — Some Fire Polish to Clean | Requires new glass lining |
| 交货时间 | In stock — ready to ship | In stock — ready to ship | In stock — ready to ship | Requires re-glassing lead time |
| 库存数量 | 61 vessels | 27 vessels | 46 vessels | 26 vessels |
| 最适合 | Replacement vessels needing clean glass | New installations requiring factory glass | Budget-conscious replacements | Lowest total cost with UGE re-glass |
| 制造商 | Pfaudler, DeDietrich | UGE (IPP subsidiary) | Pfaudler, DeDietrich, others | Pfaudler, DeDietrich, EHW Thale |
Advantages of Buying Used Reactor Bodies from IPP
显著节省成本
Buying used batch type body only reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. Body only vessels offer additional savings over complete reactor systems because the agitation system is excluded from the purchase.
Replacement Vessel Flexibility
Body only reactor vessels serve as direct replacement shells for existing reactor installations. Buyers can reuse their existing agitation system, drive assembly, and mechanical seal with a new or re-glassed vessel body.
重新安装玻璃纤维，符合出厂规格
IPP offers re-glassed reactor bodies through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts. 61 re-glassed bodies are in stock with full fire polish and very clean glass condition.
Top OEM Manufacturers in Stock
IPP stocks reactor bodies from Pfaudler, DeDietrich, UGE, EHW Thale, and Schwelm. Every unit is an original OEM product with traceable provenance. DeDietrich (France) and EHW Thale (Germany) represent European OEM manufacturing.
全球业务遍及15个国家
IPP在15个国家设有办事处：巴西、加拿大、中国、捷克、法国、德国、印度、意大利、墨西哥、巴基斯坦、葡萄牙、罗马尼亚、土耳其、英国和美国。IPP已为全球超过16万名客户提供服务。.
Full Range of Sizes & Specs
Volume capacity ranges from 15 L (4 gal) to 30,300 L (8,000 gal). Pressure ratings range from 0.14 bar (2 psi) to 20.7 bar (300 psi). Temperature ratings range from 40°C (104°F) to 343.3°C (650°F). Support types include legs, lugs, and ring. Bottom head types include dish, elliptical, flat (1 unit), and cone (1 unit).
How Buying a Used Reactor Body Works
1
提交要求
Share your reactor body specifications: capacity, pressure rating, temperature, dimensions, and whether you need a replacement body for an existing system or a vessel for a new agitator.
2
接收数据包
IPP sends a detailed equipment data sheet with capacity, pressure rating, temperature, dimensions, nozzle schedule, glass condition report, and photographs of the vessel.
3
Verify Compatibility
The IPP team helps verify that the body dimensions, nozzle layout, and mounting configuration are compatible with your existing agitation system or planned installation.
4
Re-Glassing Options
IPP offers re-glassing through its UGE division (700+ vessels, 2,700+ parts in stock). Used or needs-reglass vessels can be fully restored before shipment.
5
包装和配送
IPP负责协调包装、装箱、运输和送货至您的工厂。我们在15个国家设有办事处，提供全球配送服务。请联系IPP了解运输详情。.
Industries That Buy Used Reactor Bodies
制药
化学加工
生物技术
食品和饮料
化妆品
精细化学品
农用化学品
聚合物和树脂
油漆和涂料
石化产品
Frequently Asked Questions About Purchasing Reactor Bodies
IPP stocks batch type body only reactor vessels. The largest manufacturer positions are Pfaudler, DeDietrich, and UGE. Volume capacity ranges from 15 L (4 gal) to 30,300 L (8,000 gal). 浏览IMS库存，了解当前库存情况。.
A body only reactor is a reactor vessel shell sold without an agitation system. The vessel includes the reactor body, jacket, nozzles, manway, and support structure, but does not include an agitator, drive assembly, motor, or mechanical seal. Buyers typically purchase body only vessels as replacement shells for existing reactors, or to install their own agitation system.
Purchasing used batch type body only reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on manufacturer, capacity, and condition. IPP provides detailed quotes with full specification matching on request. Contact IPP for pricing on specific units from our current reactor body inventory.
IPP stocks reactor bodies from 19 manufacturers. The largest inventory positions are Pfaudler, DeDietrich, UGE, EHW Thale, and Schwelm. Pfaudler, DeDietrich (France), and EHW Thale (Germany) represent major international glass-lined equipment manufacturers.
是的。 IPP stocks new glass-lined reactor bodies from its UGE (Universal Glasteel Equipment) subsidiary. UGE was founded in 1995 and provides glass-lined equipment through the IPP Group. IPP also stocks unused surplus reactor bodies — manufactured but never installed — offering new-equipment performance with immediate availability.
IPP stocks reactor bodies in five conditions: re-glassed, used, new from UGE, needs reglass, and unused surplus. Re-glassed reactor bodies have received new borosilicate glass linings through IPP's UGE division. Unused reactor bodies were manufactured but never installed in a process.
重新涂覆玻璃的反应釜在原 OEM 容器本体上加装了新的硼硅酸盐玻璃内衬。. IPP 通过其 UGE（通用玻璃钢设备）部门提供玻璃钢翻新服务，该部门成立于 1995 年，库存有 700 多个容器和 2700 多个零件。. Re-glassed bodies in IPP inventory show full fire polish (FF) and very clean (VC) glass condition ratings.
IPP reports glass condition grades on each reactor body listing. Grades include Very Clean (VC), Clean (C), Dirty (D) meaning light cleaning needed, and New for factory-new UGE vessels. Glass fire polish grades include Full Fire Polish (FF), Some Fire Polish (F), and New. These condition ratings help buyers assess glass lining quality before purchasing.
IPP stocks body only reactor vessels primarily in glass-lined construction (166 of 172 units, or 96.5%). Additional units are available in stainless steel 316, stainless steel 316L (1 unit), stainless steel austenitic (1 unit), and Hastelloy (1 unit). 玻璃内衬结构为制药、化工和特种制造工艺提供耐腐蚀性。.
是的。 Body only reactor vessels are sold without an agitation system. Each vessel listing includes a nozzle schedule that specifies the drive nozzle size and location for mounting an agitator. For example, IPP# 246494 (UGE UA-300) specifies a 4 3/8” agitator nozzle. Buyers can mount their own agitator, reuse an existing drive assembly, or source a new agitation system to fit the vessel nozzle configuration.
Pfaudler reactor bodies include drive nozzles with standardized dimensions listed in the nozzle schedule. Compatibility with other manufacturers' agitators depends on matching the drive nozzle diameter, flange pattern, and vessel geometry. The IPP team can help verify compatibility for specific body and agitator combinations. Contact IPP with your existing agitator specifications for a compatibility assessment.
IPP's Gale Process Solutions (GPS) subsidiary provides custom fabricated equipment. Contact IPP to discuss sourcing a matched reactor body and agitation system together.
Each reactor body listing in IPP inventory includes a detailed nozzle schedule specifying the number, size, and location of all vessel openings. Typical nozzle schedules include manway openings (12” to 18”), process nozzles (2” to 10”), drive nozzles (4 3/8”), and bottom outlet nozzles. Contact IPP with your required nozzle configuration for specific recommendations.
IPP stocks reactor bodies with three support types: legs, lugs, and ring supports. The support type determines how the vessel is mounted in your plant. Leg-supported vessels stand on the floor, while lug-supported vessels are mounted from above on structural steel. Contact IPP to find reactor bodies matching your plant's mounting configuration.
ZH 
EN 
ES 
FR 
PL 
DE 
AR 
UR 
HI 
NL 
TR 
IT 
UK 
RU 
JA 
PT