Buy Used Wiped/Thin Film Evaporators for Sale

Buying used wiped and thin film evaporators through International Process Plants gives pharmaceutical, chemical, food and beverage, and wastewater treatment operators access to heated jacketed tube evaporators with rotating wiper blades that spread incoming feed into a thin film for rapid evaporation of heat-sensitive or viscous liquids from Luwa SMS, Buss-SMS-Canzler GmbH, Carl Canzler, and Pfaudler. ▶

Heat transfer surface areas span 0.2 m² (2.2 ft²) up to 16 m² (172.2 ft²) across the rotor-evaporator population. Materials of construction span Stainless Steel 316, Stainless Steel 316L, Stainless Steel 304, Stainless Steel Austenitic, Hastelloy C22, Hastelloy C276, Glasslined, and Carbon Steel. Internal pressure ratings reach from 0.5 bar (7.3 psi) up to 16 bar (232.1 psi). Operating temperatures extend from 100 °C (212 °F) up to 398.9 °C (750 °F). A majority of stocked units carry vacuum-rated jackets and vapor heads.

Stocked model lines include the Luwa SMS HM, KH, and MLK rotor families, the Carl Canzler 450/1.8, 600/3,0, and 900/6,5 series, and Buss-SMS-Canzler 450/3,5, 900/6,5, and Sambay short-path units. Wiper blade options on stocked rotors include 316Ti stainless steel with phenol resin scrapers, graphite, PTFE, plain 316 stainless steel, and Hastelloy C276 for corrosive duty. Condition grades on offer cover Used, Unused, and Re-glassed inventory. Buying used wiped and thin film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

65+

Wiped & Thin Film in Stock

1980

Estabelecida desde

15

Países com escritórios

Hitachi Stainless Steel 304

Usado

Luwa SMS Stainless Steel 316L

Usado

LCI Stainless Steel 316L

Usado

Buy Used Wiped/Thin Film Evaporators by Material

IPP stocks wiped/thin film evaporators across multiple material options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Wiped/Thin Film Evaporators for Sale

IPP stocks stainless steel wiped/thin film evaporators. Available from Luwa SMS, Buss-SMS-Canzler GmbH, Carl Canzler and other manufacturers.

Hitachi Stainless Steel 304

Used Hitachi Stainless Steel 304 evaporator.

Pressão:1,03 bar (15 psi)

Temperatura:182.2 °C (360 °F)

Material:Aço inoxidável 304

Doença:Usado

Fabricante:Hitachi

Modelo:Adjust-O-Film

Diâmetro:1.200 mm (48 pol.)

Comprimento:4,000 mm (158 in)

Luwa SMS Stainless Steel 316L

Used Luwa SMS Stainless Steel 316L evaporator.

Pressão:3.2 bar (46.4 psi)

Temperatura:200 °C (392 °F)

Material:Aço inoxidável 316L

Doença:Usado

Fabricante:Luwa SMS

Modelo:HM-1200

Diâmetro:750 mm (29.5 in)

Comprimento:4,850 mm (190.9 in)

Buy Used Other Wiped/Thin Film Evaporators for Sale

IPP stocks other wiped/thin film evaporators. Available from Pfaudler, LCI and other manufacturers.

Pfaudler revestido de vidro

Evaporador Pfaudler com revestimento de vidro refeito.

Temperatura:200 °C (392 °F)

Material:Revestido de vidro

Doença:Condição de vidraceiro refeito

Diâmetro:1.200 mm (48 pol.)

Comprimento:1.050 mm (42 pol.)

LCI Carbon Steel

Used LCI Carbon Steel evaporator.

Temperatura:260 °C (500 °F)

Material:Aço carbono

Doença:Usado

Diâmetro:610 mm (24 pol.)

Comprimento:1.200 mm (48 pol.)

Buy Used Hastelloy Wiped/Thin Film Evaporators for Sale

IPP stocks hastelloy wiped/thin film evaporators. Available from SMS Buss, Luwa SMS and other manufacturers.

SMS Buss Hastelloy - C22

Used SMS Buss Hastelloy – C22 evaporator.

Pressão:1,72 bar (25 psi)

Temperatura:250 °C (482 °F)

Material:Hastelloy – C22

Doença:Usado

Fabricante:SMS Buss

Modelo:LN 1400

Diâmetro:850 mm (33,5 pol.)

Comprimento:6,300 mm (248.8 in)

Luwa SMS Hastelloy - C276

Used Luwa SMS Hastelloy – C276 evaporator.

Pressão:1 bar (14,5 psi)

Material:Hastelloy – C276

Doença:Usado

Fabricante:Luwa SMS

Modelo:MLK4-0600/4500/90

Diâmetro:600 mm (23.6 in)

Comprimento:5,000 mm (196.9 in)

Buy Used Wiped and Thin Film Evaporators by Manufacturer

IPP stocks wiped and thin film evaporators from Luwa SMS, Buss-SMS-Canzler, Carl Canzler, Pfaudler, and other manufacturers. Buying from the original equipment manufacturer ensures compatibility with your existing plant infrastructure and replacement parts availability.

Buy Used Luwa SMS Wiped/Thin Film Evaporators for Sale

IPP stocks Luwa SMS wiped/thin film evaporators across a wide range of heat transfer surface areas and evaporation rates. Luwa SMS is a leading manufacturer of wiped film and thin film evaporators used in chemical, pharmaceutical, and food processing applications.

Luwa SMS HS0050 — 0.5 m²

Used Luwa SMS HS0050 wiped/thin film evaporator. 0.5 m² (5.4 ft²) heat transfer area with 11.3 kg/h (25 lb/h) evaporation rate in stainless steel 316 construction.

0.5 m² (5.4 ft²) heat transfer area

11.3 kg/h (25 lb/h) evaporation rate

200°C (392°F), vacuum capable

Motor de 14,9 kW (20 HP)

152.4 mm (6 in) dia., vertical

Luwa SMS L-425 — 3.2 m²

Used Luwa SMS L-425 wiped/thin film evaporator. 3.2 m² (34.4 ft²) heat transfer area in stainless steel austenitic construction with vacuum capability.

3.2 m² (34.4 ft²) heat transfer area

230°C (446°F), vacuum capable

559 mm (22 in) dia., vertical

Stainless steel austenitic

2,200 mm (87 in) height

Luwa SMS SS 316L — 10 m²

Used Luwa SMS wiped/thin film evaporator. 10 m² (107.6 ft²) heat transfer area with 242.7 kg/h (535 lb/h) evaporation rate in stainless steel 316L.

10 m² (107.6 ft²) heat transfer area

242.7 kg/h (535 lb/h) evaporation rate

4.5 bar (65.3 psi) pressure

800 mm (31.5 in) diameter

Dish top head, cone bottom

Buy Used Buss-SMS-Canzler Wiped/Thin Film Evaporators for Sale

IPP stocks Buss-SMS-Canzler wiped/thin film evaporators in stainless steel 316 construction with heat transfer areas ranging from 2 m² to 13.9 m². Buss-SMS-Canzler is a German manufacturer of thin film and wiped film evaporators for chemical and pharmaceutical processing.

Buss-SMS-Canzler LN-1400 — 13.9 m²

Used Buss-SMS-Canzler LN-1400 wiped/thin film evaporator. 13.9 m² (150 ft²) heat transfer area in stainless steel 316 with vacuum capability.

13.9 m² (150 ft²) heat transfer area

343.3°C (650°F), vacuum capable

Motor de 14,9 kW (20 HP)

Cone bottom head

Stainless steel 316

Buss-SMS-Canzler 450/3,5-KO — 3.5 m²

Used Buss-SMS-Canzler 450/3,5-KO wiped/thin film evaporator. 3.5 m² (37.7 ft²) heat transfer area with 16 bar (232.1 psi) pressure rating and mechanical seal.

3.5 m² (37.7 ft²) heat transfer area

16 bar (232.1 psi), 200°C (392°F)

Vacuum capable, mechanical seal

450 mm (17.7 in) dia., vertical

3.7 kW (5 HP), direct coupled

Buss-SMS-Canzler Sambay B-300-N — 2 m²

Used Buss-SMS-Canzler Sambay B-300-N wiped/thin film evaporator. 2 m² (21.5 ft²) heat transfer area with 47.6 kg/h (105 lb/h) evaporation rate.

2 m² (21.5 ft²) heat transfer area

47.6 kg/h (105 lb/h) evaporation rate

185°C (365°F), vacuum capable

Teflon lined wipers, mechanical seal

4 kW (5.4 HP), belt drive

Buy Used Wiped/Thin Film Evaporators from Other Manufacturers

Beyond Luwa SMS and Buss-SMS-Canzler, IPP stocks wiped/thin film evaporators from Carl Canzler, Pfaudler, Leybold-Heraeus, Artisan, LCI, Pope Scientific, Hitachi, and other manufacturers. These evaporators span a wide range of materials, heat transfer areas, and pressure ratings.

Carl Canzler 600/3,0-K4,5 — 3 m²

Used Carl Canzler 600/3,0-K4,5 wiped film evaporator. 3 m² (32.3 ft²) heat transfer area with 72.6 kg/h (160 lb/h) evaporation rate in stainless steel 316L with internal condenser.

3 m² (32.3 ft²) heat transfer area

72.6 kg/h (160 lb/h) evaporation rate

5 bar (72.5 psi), 250°C (482°F)

Internal condenser 4.5 m², graphite wipers

600 mm (23.6 in) dia., mechanical seal

Leybold-Heraeus KD300 — 3 m²

Used Leybold-Heraeus KD300 wiped/thin film evaporator. 3 m² (32.3 ft²) heat transfer area with 72.6 kg/h (160 lb/h) evaporation rate and internal condenser.

3 m² (32.3 ft²) heat transfer area

72.6 kg/h (160 lb/h) evaporation rate

2 bar (29 psi), 200°C (392°F)

Internal condenser 5 m², mechanical seal

500 mm (19.7 in) dia., gear drive

Pfaudler Glass-Lined — 10 m²

Re-glassed Pfaudler glass-lined wiped/thin film evaporator. 10 m² (107.6 ft²) heat transfer area with 242.7 kg/h (535 lb/h) evaporation rate and glass-covered graphite wipers.

10 m² (107.6 ft²) heat transfer area

242.7 kg/h (535 lb/h) evaporation rate

200°C (392°F), vacuum capable

1,200 mm (48 in) dia., mechanical seal

Re-glassed condition, 7.5 kW (10 HP)

Buy Used Wiped and Thin Film Evaporators by Condition

IPP stocks wiped/thin film evaporators in used, unused, and re-glassed condition. Choose the condition that matches your budget and performance requirements.

Buy Used Wiped/Thin Film Evaporators for Sale

IPP stocks good used wiped/thin film evaporators from Luwa SMS, Buss-SMS-Canzler, Carl Canzler, and other manufacturers in stainless steel, glass-lined, and other constructions. Good used condition offers the lowest price point while providing OEM-quality vessels.

Used Luwa SMS SS 316L — 10 m²

Used Luwa SMS wiped/thin film evaporator. 10 m² (107.6 ft²) heat transfer area with 242.7 kg/h (535 lb/h) evaporation rate in stainless steel 316L.

10 m² (107.6 ft²) heat transfer area

242.7 kg/h (535 lb/h) evaporation rate

4.5 bar (65.3 psi) pressure

800 mm (31.5 in) diameter

Good used condition

Used Buss-SMS-Canzler LN-1400 — 13.9 m²

Used Buss-SMS-Canzler LN-1400 wiped/thin film evaporator. 13.9 m² (150 ft²) heat transfer area in stainless steel 316 rated to 343.3°C (650°F).

13.9 m² (150 ft²) heat transfer area

343.3°C (650°F), vacuum capable

Motor de 14,9 kW (20 HP)

Stainless steel 316

Good used condition

Used Carl Canzler 600/3,0-K4,5 — 3 m²

Used Carl Canzler wiped film evaporator. 3 m² (32.3 ft²) heat transfer area with 72.6 kg/h (160 lb/h) evaporation rate and 4.5 m² internal condenser.

3 m² (32.3 ft²) heat transfer area

72.6 kg/h (160 lb/h) evaporation rate

5 bar (72.5 psi), 250°C (482°F)

Internal condenser, graphite wipers

Good used condition

Buy Unused Wiped/Thin Film Evaporators for Sale

IPP stocks unused surplus wiped/thin film evaporators that were manufactured but never installed. Unused evaporators offer new-equipment performance with immediate availability and savings compared to new OEM orders.

Unused Pfaudler 103.4-36V-274 — 9.5 m²

Unused Pfaudler 103.4-36V-274 wiped/thin film evaporator. 9.5 m² (102 ft²) heat transfer area with 226.8 kg/h (500 lb/h) evaporation rate in stainless steel 304.

9.5 m² (102 ft²) heat transfer area

226.8 kg/h (500 lb/h) evaporation rate

5.9 bar (85 psi), 300°C (572°F)

Internal condenser, mechanical seal

889 mm (35 in) dia., vertical

Unused Chema Balke Dürr RDA350/2.5-A — 2.6 m²

Unused Chema Balke Dürr GmbH RDA350/2.5-A wiped/thin film evaporator. 2.6 m² (27.7 ft²) heat transfer area with 61.2 kg/h (135 lb/h) evaporation rate in stainless steel 316.

2.6 m² (27.7 ft²) heat transfer area

61.2 kg/h (135 lb/h) evaporation rate

2 bar (29 psi), 180°C (356°F)

Vacuum capable, cone bottom

406.4 mm (16 in) dia., vertical

Buy Re-Glassed Wiped/Thin Film Evaporators for Sale

IPP stocks re-glassed wiped/thin film evaporators restored with new borosilicate glass linings on original OEM vessels. Re-glassed evaporators provide restored corrosion protection at significant savings compared to new OEM equipment.

Re-Glassed Pfaudler Glass-Lined — 10 m²

Re-glassed Pfaudler glass-lined wiped/thin film evaporator. 10 m² (107.6 ft²) heat transfer area with 242.7 kg/h (535 lb/h) evaporation rate and glass-covered graphite wipers.

10 m² (107.6 ft²) heat transfer area

242.7 kg/h (535 lb/h) evaporation rate

200°C (392°F), vacuum capable

1,200 mm (48 in) dia., mechanical seal

Re-glassed condition, 7.5 kW (10 HP)

Ready to Buy a Used Wiped/Thin Film Evaporator?

Tell us your specifications and requirements. Our team will match your needs against current wiped/thin film evaporators inventory and provide a detailed quote.

Buying Used Wiped/Thin Film Evaporators vs Buying New

Buying used wiped/thin film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new wiped/thin film evaporators compare across key factors.

Fator	Usado a partir do IPP	Novo (OEM)
Custo do equipamento	Economia significativa em comparação com o preço de um produto novo original.	Preço de tabela completo do fabricante original (OEM)
Cronograma de entrega	Unidades em estoque, prontas para envio.	Prazos de entrega prolongados (nova fabricação)
Materiais	Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 316L, Stainless Steel 304	Conforme especificado
Classificações de pressão	0.5 bar (7.3 psi) to 16 bar (232.1 psi)	Construído sob medida de acordo com as especificações.
Fabricantes	Luwa SMS, Buss-SMS-Canzler GmbH, Carl Canzler and others	OEM único
Impacto ambiental	Prolonga o ciclo de vida do equipamento e reduz o desperdício.	Consumo de novas matérias-primas

Advantages of Buying Used Wiped/Thin Film Evaporators from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver wiped/thin film evaporators ready for your process.

Economia de custos significativa

Buying used wiped/thin film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilidade imediata

In-stock wiped/thin film evaporators from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Vários fabricantes OEM

IPP stocks wiped/thin film evaporators from Luwa SMS, Buss-SMS-Canzler GmbH, Carl Canzler, Pfaudler and other manufacturers. Every unit is an original OEM product with traceable provenance.

Qualidade e Recondicionamento

A IPP oferece serviços de reforma através de sua divisão UGE (Universal Glasteel Equipment), fundada em 1995, que possui em estoque mais de 700 embarcações e mais de 2.700 peças.

Presença global em 15 países

A IPP possui escritórios em 15 países: Brasil, Canadá, China, República Tcheca, França, Alemanha, Índia, Itália, México, Paquistão, Portugal, Romênia, Turquia, Reino Unido e Estados Unidos. A IPP já atendeu mais de 160.000 clientes em todo o mundo.

Gama completa de materiais e especificações

IPP stocks wiped/thin film evaporators across a wide range of specifications to match your process requirements.

How Buying a Used Wiped/Thin Film Evaporator Works

The process of purchasing used wiped/thin film evaporators from IPP follows five steps, from specification to delivery.

1

Enviar Requisitos

Compartilhe suas especificações: capacidade, material de construção, classificação de pressão, temperatura e aplicação. Ou navegue em nosso catálogo com ferramenta de busca.

2

Receba o pacote de dados.

A IPP envia uma ficha técnica detalhada do equipamento com especificações, dimensões, relatório de condição e fotografias.

3

Inspecione o equipamento

Entre em contato com a IPP para agendar uma visita presencial ou solicite uma demonstração em vídeo ao vivo com um membro da equipe da IPP em uma de nossas unidades globais.

4

Opções de reforma

A IPP oferece serviços de reforma através de sua divisão UGE (mais de 700 embarcações, mais de 2.700 peças em estoque). Entre em contato com a IPP para obter detalhes sobre serviços adicionais.

5

Embalagem e entrega

A IPP coordena a embalagem, o acondicionamento, o frete e a entrega até a sua fábrica. Envios internacionais a partir de escritórios em 15 países.

Industries That Buy Used Wiped/Thin Film Evaporators

IPP supplies used wiped/thin film evaporators to manufacturers across multiple process industries worldwide.

Processamento químico

Farmacêutico

Alimentos e bebidas

Laticínio

Petroquímicos

Ambiental

Biotecnologia

Celulose e Papel

Tintas e Revestimentos

Petroquímicos

Frequently Asked Questions About Buying Used Wiped/Thin Film Evaporators

Answers to the most common questions from procurement and operations teams evaluating used wiped/thin film evaporators.

How many wiped/thin film evaporators does IPP have in stock?

IPP stocks wiped/thin film evaporators from Luwa SMS, Buss-SMS-Canzler GmbH, Carl Canzler, Pfaudler, Artisan and other manufacturers. Available in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 316L, Stainless Steel 304 construction. Browse the IMS inventory for current availability.

What condition grades are available for used wiped/thin film evaporators?

IPP stocks wiped/thin film evaporators in multiple conditions: Used, Unused, Re-glassed. Consulte o estoque atual para ver as opções de condição disponíveis.

Does IPP sell new wiped/thin film evaporators as well as used?

Sim. IPP stocks new wiped/thin film evaporators through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Contate a IPP para obter detalhes sobre novos produtos em estoque.

Quais materiais de construção estão disponíveis?

IPP stocks wiped/thin film evaporators in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 316L, Stainless Steel 304 construction. Entre em contato com a IPP para discutir os requisitos de materiais para sua aplicação.

What manufacturers of wiped/thin film evaporators does IPP stock?

IPP stocks wiped/thin film evaporators from Luwa SMS, Buss-SMS-Canzler GmbH, Carl Canzler, Pfaudler, Artisan and other manufacturers. Consulte o inventário atual para ver os fabricantes disponíveis.

How much can I save buying used wiped/thin film evaporators versus new?

Buying used wiped/thin film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. A economia exata depende do fabricante, da capacidade de produção, do material de construção e do estado de conservação. Entre em contato com a IPP para obter preços de unidades específicas.

How long does it take to receive wiped/thin film evaporators from IPP?

In-stock wiped/thin film evaporators are ready to ship. A subsidiária de GPS da IPP fornece novos equipamentos fabricados sob encomenda, com prazo médio de entrega de 12 a 16 semanas. A IPP realiza envios a partir de escritórios em 15 países em todo o mundo.

A IPP cuida do envio e do frete?

A IPP coordena a embalagem, o acondicionamento, o frete e a entrega até a sua fábrica. Com escritórios em 15 países e Mais de 160.000 clientes atendidos em todo o mundo., A IPP possui vasta experiência em logística global de equipamentos.

Outras peças e equipamentos da IPP

In addition to wiped/thin film evaporators, IPP stocks equipment across multiple categories for complete process solutions.

Trocadores de calor

Reatores

Tanques

Looking for New Wiped/Thin Film Evaporators?

O Grupo IPP fornece equipamentos novos através de sua subsidiária Gale Process Solutions (GPS), que oferece equipamentos fabricados sob medida com prazo médio de entrega de 12 a 16 semanas. A IPP também oferece equipamentos com revestimento de fibra de vidro através de sua divisão UGE (Universal Glasteel Equipment).

Ready to Buy Wiped/Thin Film Evaporators?

Desde 1980, a IPP fornece equipamentos de processo de alta qualidade para todo o mundo, atendendo a mais de 160.000 clientes. Diga-nos o que você precisa — nossa equipe responderá com opções de estoque e preços adequados.