Buy Used Reactors for Sale

Buying used reactors through International Process Plants gives chemical, pharmaceutical, biotech, and specialty manufacturers access to batch-type agitated and body only reactors from Pfaudler, DeDietrich, UGE, Gale Process Solutions, and other OEM manufacturers. Capacities range from 2 L to 80,000 L in glass-lined, stainless steel, Hastelloy, and titanium construction. Purchasing used saves up to 50% of capital and 90% of lead time versus buying new. IPP has supplied process equipment worldwide since 1980. ▶

IPP stocks batch-type agitated reactors with complete agitation systems and batch type body only reactor shells. Materials of construction include glass-lined, stainless steel 316, 316L, 304, and 321, Hastelloy C-22, C-276, and C-4, and titanium. Volume capacity ranges from 2 L to 80,000 L (0.5 to 21,150 gallons). Pressure ratings range from 0.14 bar (2 psi) to 358.7 bar (5,200 psi).

Condition options include good used, re-glassed, new, and surplus. IPP offers re-glassed reactors through its Universal Glasteel Equipment (UGE) division and new stainless steel reactors through Gale Process Solutions (GPS). All vessels are ASME-coded, National Board, CRN, CE-marked, or PED compliant, with sanitary and clean-in-place (CIP/SIP) options available. Purchasing used reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

Reactor Subtypes

150

OEM Manufacturers

1980

Established Since

Countries with Offices

Batch-Type Agitated Reactors

Complete reactor systems with agitation

Batch Type Body Only Reactors

Reactor shells without agitation

Glass-Lined Reactors

Glass-lined units from Pfaudler, DeDietrich, UGE

Trusted around the world by

Browse Used Reactors by Type

IPP stocks two reactor subtypes: batch-type agitated systems with complete agitation and batch type body only shells. Choose the subtype that matches your process requirements.

Batch-Type Agitated Reactors

Complete reactor systems including vessel, jacket, agitation drive, impeller, shaft seal, and baffles. Available from Pfaudler, DeDietrich, Gale Process Solutions, UGE, and 150+ additional manufacturers. Glass-lined, stainless steel, Hastelloy, and titanium construction. Capacities from 2 L to 80,000 L (0.5 to 21,150 gal).

Batch Type Body Only Reactors

Reactor shells including vessel, jacket, heads, and nozzles — sold without agitation components. Available from Pfaudler, DeDietrich, and UGE as the primary manufacturers. Primarily glass-lined construction. Available in re-glassed, used, new, and unused conditions.

Fixed Bed Reactors

Catalytic reactors with stationary catalyst beds for continuous gas- or liquid-phase reactions. Available from Nooter. Carbon steel construction. 49,200 L (13,000 gal) capacity in stock.

Fluid Bed Reactors

Reactors that suspend solid catalyst particles in an upward-flowing gas or liquid stream for high heat-transfer and uniform mixing. No units currently in IPP inventory. Contact IPP to source from our global network or for new fabrication via Gale Process Solutions (GPS).

Hydrogenation Reactors

High-pressure reactors purpose-built for hydrogenation reactions with hydrogen gas. Available from Reschka GmbH, Applied Fusions Ltd, Gebr. Quast/Gothe KG, and other European fabricators. Stainless steel 316, austenitic, and Hastelloy C-276 construction. Capacities from 1,250 L to 13,150 L (328 to 3,450 gal).

Polymerization Reactors

Reactors engineered for polymerization processes including bulk, solution, suspension, and emulsion polymerization. No units currently in IPP inventory. Contact IPP to source from our global network or for new fabrication via Gale Process Solutions (GPS).

Tubular Reactors

Continuous-flow reactors with reactants flowing through long, narrow tubes for precise residence-time control. Available from Fox Fabricators and Snowtech. Stainless steel 304 and 316 construction.

Buy Used Process Reactors by Subtype

IPP stocks reactors across two subtypes. The key purchase decision is whether you need a complete agitated system or a reactor shell only. Browse representative products from each subtype below.

Buy Used Batch-Type Agitated Reactors for Sale

Batch-type agitated reactors are complete systems that include the reactor vessel, agitation drive, impeller, shaft seal, and baffles. Available from Pfaudler, DeDietrich, Gale Process Solutions, UGE, and 150+ other manufacturers.

Pfaudler RA Glass-Lined — 7,550 L

Re-glassed Pfaudler RA glass-lined batch reactor. 7,550 L (2,000 gal) capacity with CBT impeller, H-baffle, and full vacuum capability.

Capacity (Design):7,550 L (2,000 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Internal Full Vacuum:Full vacuum

Agitation Seal Type:mechanical seal

Motor Power:11.2 kW (15 HP)

Impeller Type:CBT impeller

Glass Fire Polish:Full fire polish

Glass Condition:very clean glass

B. Braun + Diessel SS 316 — 2,100 L

Used B. Braun + Diessel Biotech stainless steel 316 batch reactor. 2,100 L (555 gal) with mirror polish, CIP capability, and sanitary construction.

Capacity (Design):2,100 L (555 gal) capacity

Internal Pressure:3 bar (43.5 psi)

Internal Temperature:150°C (302°F)

CIP:Yes

Sanitary Construction:Yes

Motor Power:1.5 kW (2 HP)

Impeller Type:flat blade turbine

Diameter:1,000 mm (39.4 in) × 1,900 mm (74.8 in)

Straight Side Length:Legs

UGE UA-300 Glass-Lined — 1,150 L

New UGE UA-300 glass-lined batch reactor. 1,150 L (300 gal) capacity with Cryo-Lock agitation, beavertail baffle, and new glass condition.

Capacity (Design):1,150 L (300 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Internal Full Vacuum:Full vacuum

Agitation Seal Type:mechanical seal

Motor Power:3.7 kW (5 HP)

Agitator Details:Cryo-Lock

Glass Fire Polish:New glass

Glass Condition:beavertail baffle

Buy Used Batch Type Body Only Reactors for Sale

Batch type body only reactors are reactor shells — vessel, jacket, heads, and nozzles — sold without agitation components. Available primarily from Pfaudler, DeDietrich, and UGE. All units are glass-lined construction.

DeDietrich SA Glass-Lined — 3,800 L

Re-glassed DeDietrich SA glass-lined body only reactor. 3,800 L (1,000 gal) capacity with full fire polish and very clean glass condition.

Capacity (Design):3,800 L (1,000 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:260°C (500°F)

Internal Full Vacuum:Full vacuum capable

Diameter:1,600 mm (63 in) × 1,850 mm (72.8 in)

Straight Side Length:Legs

Glass Fire Polish:Full fire polish

Glass Condition:very clean glass

Pfaudler ELL Glass-Lined — 1,900 L

Re-glassed Pfaudler ELL glass-lined body only reactor. 1,900 L (500 gal) capacity with full fire polish and very clean glass condition.

Capacity (Design):1,900 L (500 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:176.7°C (350°F)

Jacket Pressure:Jacket: 8.3 bar (120 psi)

Diameter:1,500 mm (59.1 in) × 914 mm (36 in)

Straight Side Length:Legs

Glass Fire Polish:Full fire polish

Glass Condition:very clean glass

UGE UA-300 Glass-Lined — 1,150 L

New UGE UA-300 glass-lined body only reactor. 1,150 L (300 gal) capacity with 24″ main cover and new glass condition.

Capacity (Design):1,150 L (300 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Internal Full Vacuum:Full vacuum capable

Diameter:1,200 mm (47.2 in) × 1,200 mm (47.2 in)

Straight Side Length:Legs

Glass Fire Polish:New

Glass Condition:New

Buy Used Fixed Bed Reactors for Sale

Fixed bed reactors hold a stationary catalyst bed for continuous gas- or liquid-phase reactions. IPP currently stocks 1 fixed bed reactor — a 49,200 L (13,000 gal) Nooter carbon steel unit rated to 371.1°C (700°F).

Nooter Carbon Steel — 49,200 L (13,000 gal)

Used Nooter carbon steel fixed bed reactor. 49,200 L (13,000 gal) capacity rated to 2.1 bar (30 psi) and 371.1°C (700°F).

Capacity (Design):49,200 L (13,000 gal)

Internal Pressure:2.1 bar (30 psi)

Internal Temperature:371.1°C (700°F)

Material:Carbon Steel

Manufacturer:Nooter

Condition:Used

Buy Used Fluid Bed Reactors for Sale

Fluid bed reactors suspend solid catalyst particles in an upward gas or liquid flow for high heat-transfer and uniform mixing. No fluid bed units are currently in IPP inventory. Contact IPP to source from our global network or for new fabrication via Gale Process Solutions (GPS).

Fluid Bed Reactors Coming Soon

IPP acquires inventory regularly across all reactor subtypes. Contact our engineering team to discuss your fluid bed reactor requirements — we can source from our global network or quote a new build via GPS.

Buy Used Hydrogenation Reactors for Sale

Coek Engineering Hastelloy C-276 — 70,000 L (18,500 gal)

Used Coek Engineering Hastelloy C-276 hydrogenation reactor. 70,000 L (18,500 gal) capacity rated to 98 bar (1,400 psi) and 315°C (599°F).

Capacity (Design):70,000 L (18,500 gal)

Internal Pressure:98 bar (1,400 psi)

Internal Temperature:315°C (599°F)

Material:Hastelloy C-276

Manufacturer:Coek Engineering

Johann Stahl SS Austenitic — 8,900 L (2,350 gal)

Used Johann Stahl (Mannheim, Germany) austenitic stainless steel hydrogenation reactor. 8,900 L (2,350 gal) capacity rated to 84 bar (1,200 psi).

Capacity (Design):8,900 L (2,350 gal)

Internal Pressure:84 bar (1,200 psi)

Internal Temperature:250°C (482°F)

Material:Stainless Steel Austenitic

Manufacturer:Johann Stahl, Mannheim

Applied Fusions SS 316 — 3,000 L (793 gal)

Used Applied Fusions Ltd stainless steel 316 hydrogenation reactor. 3,000 L (793 gal) capacity rated to 37.9 bar (550 psi) and 250°C (482°F).

Capacity (Design):3,000 L (793 gal)

Internal Pressure:37.9 bar (550 psi)

Internal Temperature:250°C (482°F)

Material:Stainless Steel 316

Manufacturer:Applied Fusions Ltd

Buy Used Polymerization Reactors for Sale

Polymerization reactors are engineered for polymer processes including bulk, solution, suspension, and emulsion polymerization. No polymerization units are currently in IPP inventory. Contact IPP to source from our global network or for new fabrication via Gale Process Solutions (GPS).

Polymerization Reactors Coming Soon

IPP acquires inventory regularly across all reactor subtypes. Contact our engineering team to discuss your polymerization reactor requirements — we can source from our global network or quote a new build via GPS.

Buy Used Tubular Reactors for Sale

Tubular reactors are continuous-flow vessels in which reactants travel through long, narrow tubes for precise residence-time control. IPP stocks 3 tubular reactors including Fox Fabricators and Snowtech Hydro Cracker / Fisher Tropsch units. Stainless steel 304 and 316 construction.

Fox Fabricators SS 304 Tubular Loop — 182,900 mm (7,200 in)

Used Fox Fabricators stainless steel 304 tubular loop reactor. 182,900 mm (7,200 in) tube length rated to 85.1 bar (1,250 psi) and 204.4°C (400°F).

Tube Length:182,900 mm (7,200 in)

Tube Pressure:85.1 bar (1,250 psi)

Tube Temperature:204.4°C (400°F)

Material:Stainless Steel 304

Model:Tubular loop reactor

Manufacturer:Fox Fabricators

Snowtech Hydro Cracker SS 316 Tubular

Used Snowtech Hydro Cracker & Fisher Tropsch stainless steel 316 tubular reactor rated to 500°C (932°F).

Tube Temperature:500°C (932°F)

Material:Stainless Steel 316

Manufacturer:Snowtech Hydro Cracker & Fisher Tropsch

Application:Hydro cracking / Fischer-Tropsch synthesis

Batch-Type Agitated vs Body Only Reactors

Understanding the difference between these two reactor subtypes is the key purchase decision when buying used reactors from IPP. Here is how they compare across key factors.

Factor	Batch-Type Agitated	Batch Type Body Only
What Is Included	Vessel, jacket, heads, nozzles, agitation drive, impeller, shaft seal, baffles	Vessel, jacket, heads, nozzles only — no agitation
Units in Stock	Larger inventory position	Smaller, specialized inventory
Materials Available	Glass-lined, SS, Hastelloy, Titanium, Alloy 20, Monel, Inconel	Glass-lined (all units)
Manufacturers	Pfaudler, DeDietrich, GPS, UGE, and 150+ others	Pfaudler, DeDietrich, UGE, EHW Thale
Capacity Range	2 L to 80,000 L (0.5 to 21,150 gal)	94.6 L to 3,800 L (25 to 1,000 gal)
Best For	Complete turnkey reactor installations requiring mixing	Replacement vessel shells or when buyer has existing drives and agitators
Agitation Included	Yes — drive, impeller, seal, baffles	No — vessel shell only
Conditions Available	Used, re-glassed, new, unused, refurbished	Re-glassed, used, new, needs reglass, unused

Buy Used Reactors for Sale by Manufacturer

IPP stocks reactors from Pfaudler, DeDietrich, UGE, and many additional OEMs. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Pfaudler Reactors for Sale

Pfaudler is the deepest single-manufacturer position in IPP’s reactor inventory. Available model families include E, RA, P, DK, DG, and DM series in used, re-glassed, and new conditions.

Pfaudler E Glass-Lined — 1,350 L

Used Pfaudler E glass-lined batch reactor. 1,350 L (362.4 gal) capacity with retreat curve impeller, packing seal, and 5.5 kW (7.4 HP) motor.

Capacity (Design):1,350 L (362.4 gal) capacity

Internal Pressure:6 bar (87 psi)

Internal Temperature:200°C (392°F)

Motor Power:5.5 kW (7.4 HP

Impeller Type:retreat curve impeller

Agitation Seal Type:Packing seal

Condition:Used condition

Pfaudler RA Glass-Lined — 7,550 L

Used Pfaudler glass-lined batch reactor. 7,550 L (2,000 gal) capacity with retreat curve impeller, mechanical seal, and 11.2 kW (15 HP) motor.

Capacity (Design):7,550 L (2,000 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Motor Power:11.2 kW (15 HP)

Impeller Type:retreat curve impeller

Agitation Seal Type:Mechanical seal

Condition:Used condition

Pfaudler RA Glass-Lined — 7,550 L

Re-glassed Pfaudler RA glass-lined batch reactor. 7,550 L (2,000 gal) capacity with CBT impeller, mechanical seal, and 11.2 kW (15 HP) motor.

Capacity (Design):7,550 L (2,000 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Motor Power:11.2 kW (15 HP)

Impeller Type:CBT impeller

Agitation Seal Type:Mechanical seal

Condition:Re-glassed condition

Buy Used DeDietrich Reactors for Sale

DeDietrich is the second deepest OEM position in IPP’s reactor inventory. Available model families include STA, SA, CTJ, and CSA series in used, re-glassed, and new conditions.

DeDietrich Glass-Lined — 378.5 L

Re-glassed DeDietrich glass-lined batch reactor. 378.5 L (100 gal) capacity with retreat curve impeller, mechanical seal, and 3.7 kW (5 HP) motor.

Capacity (Design):378.5 L (100 gal) capacity

Internal Pressure:10.3 bar (150 psi)

Internal Temperature:260°C (500°F)

Motor Power:3.7 kW (5 HP)

Impeller Type:retreat curve impeller

Agitation Seal Type:Mechanical seal

Condition:Re-glassed condition

DeDietrich CTJ Glass-Lined — 1,900 L

Re-glassed DeDietrich CTJ glass-lined batch reactor. 1,900 L (500 gal) capacity with retreat curve impeller, double mechanical seal, and 3.7 kW (5 HP) motor.

Capacity (Design):1,900 L (500 gal) capacity

Internal Pressure:5.2 bar (75 psi)

Internal Temperature:260°C (500°F)

Motor Power:3.7 kW (5 HP)

Impeller Type:retreat curve impeller

Agitation Seal Type:Double mechanical seal

Condition:Re-glassed condition

DeDietrich STA Glass-Lined — 875 L

Used DeDietrich STA glass-lined batch reactor. 875 L (231.2 gal) capacity with 2.2 kW (3 HP) motor and packing seal.

Capacity (Design):875 L (231.2 gal) capacity

Internal Pressure:2 bar (29 psi)

Motor Power:2.2 kW (3 HP) motor

Agitation Seal Type:Packing seal

Condition:Used condition

Buy New UGE Reactors for Sale

UGE (Universal Glasteel Equipment) is IPP’s glass-lined equipment subsidiary, founded in 1995. Available model families include UA-300 and UA-500 series with new glass and full warranty.

UGE UA-300 Glass-Lined — 1,150 L

New UGE UA-300 glass-lined batch reactor. 1,150 L (300 gal) capacity with flat blade turbine impeller, mechanical seal, and 3.7 kW (5 HP) motor.

Capacity (Design):1,150 L (300 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Motor Power:3.7 kW (5 HP)

Impeller Type:flat blade turbine

Agitation Seal Type:Mechanical seal

Condition:New condition

UGE UA-500 Glass-Lined — 1,900 L

New UGE UA-500 glass-lined batch reactor. 1,900 L (500 gal) capacity with flat blade turbine impeller, double mechanical seal, and 5.6 kW (7.5 HP) motor.

Capacity (Design):1,900 L (500 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Motor Power:5.6 kW (7.5 HP)

Impeller Type:flat blade turbine

Agitation Seal Type:Double mechanical seal

Condition:New condition

UGE UA-500 Glass-Lined — 1,900 L

New UGE UA-500 glass-lined batch reactor. 1,900 L (500 gal) capacity with flat blade turbine impeller, double mechanical seal, and 5.6 kW (7.5 HP) motor.

Capacity (Design):1,900 L (500 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Motor Power:5.6 kW (7.5 HP)

Impeller Type:flat blade turbine

Agitation Seal Type:Double mechanical seal

Condition:New condition

Buy Used Reactors for Sale by Condition

IPP stocks reactors in multiple condition grades — used, re-glassed, new, and surplus. Condition determines price, lead time, and remaining service life. Browse representative products by condition below.

Buy Used Condition Reactors for Sale

Used condition is the deepest inventory position. Used reactors are available in glass-lined, stainless steel, Hastelloy, and specialty alloy construction from Pfaudler, DeDietrich, and many other manufacturers.

Pfaudler E Glass-Lined — 1,350 L

Used Pfaudler E glass-lined batch reactor. 1,350 L (362.4 gal) capacity with retreat curve impeller, packing seal, and 5.5 kW (7.4 HP) motor.

Capacity (Design):1,350 L (362.4 gal) capacity

Internal Pressure:6 bar (87 psi)

Internal Temperature:200°C (392°F)

Motor Power:5.5 kW (7.4 HP)

Impeller Type:retreat curve impeller

Material:Glass-lined construction

Manufacturer:Pfaudler manufacturer

Alloy 20 Reactor — 11,350 L

Used Alloy 20 batch reactor. 11,350 L (3,000 gal) capacity with 18.6 kW (25 HP) motor. Suited for aggressive chemical environments.

Capacity (Design):11,350 L (3,000 gal) capacity

Internal Pressure:5.9 bar (85 psi)

Internal Temperature:100°C (212°F)

Motor Power:18.6 kW (25 HP) motor

Material:Alloy 20 construction

Condition:Used condition

Taylor Reid SS 321 — 3,500 L

Used Taylor Reid stainless steel 321 batch reactor. 3,500 L (925 gal) capacity rated for 25.9 bar (375 psi) and 315.6°C (600°F).

Capacity (Design):3,500 L (925 gal) capacity

Internal Pressure:25.9 bar (375 psi)

Internal Temperature:315.6°C (600°F)

Material:Stainless Steel 321

Manufacturer:Taylor Reid & Co Ltd

Condition:Used condition

Buy Re-Glassed Reactors for Sale

Re-glassed reactors have received new borosilicate glass linings through IPP’s UGE division. Available from Pfaudler, DeDietrich, EWK, and other glass-lined equipment manufacturers.

Pfaudler RA Glass-Lined — 7,550 L

Re-glassed Pfaudler RA glass-lined batch reactor. 7,550 L (2,000 gal) capacity with CBT impeller, mechanical seal, and 11.2 kW (15 HP) motor.

Capacity (Design):7,550 L (2,000 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Motor Power:11.2 kW (15 HP)

Impeller Type:CBT impeller

Agitation Seal Type:Mechanical seal

Manufacturer:Pfaudler manufacturer

DeDietrich Glass-Lined — 378.5 L

Re-glassed DeDietrich glass-lined batch reactor. 378.5 L (100 gal) capacity with retreat curve impeller, mechanical seal, and 3.7 kW (5 HP) motor.

Capacity (Design):378.5 L (100 gal) capacity

Internal Pressure:10.3 bar (150 psi)

Internal Temperature:260°C (500°F)

Motor Power:3.7 kW (5 HP)

Impeller Type:retreat curve impeller

Agitation Seal Type:Mechanical seal

Manufacturer:DeDietrich manufacturer

EWK AE Glass-Lined — 2,500 L

Re-glassed EWK Eisenwerke Kaiserslautern AE glass-lined batch reactor. 2,500 L (660 gal) capacity with 6.6 kW (8.9 HP) motor.

Capacity (Design):2,500 L (660 gal) capacity

Internal Pressure:6 bar (87 psi)

Internal Temperature:200°C (392°F)

Motor Power:6.6 kW (8.9 HP) motor

Material:Glass-lined construction

Manufacturer:EWK Eisenwerke Kaiserslautern

Buy New Reactors for Sale

IPP supplies new reactors through Gale Process Solutions (GPS) for stainless steel and Universal Glasteel Equipment (UGE) for glass-lined construction. GPS provides custom fabricated equipment with 12–16 week average delivery.

GPS SS 316L — 15,150 L

New Gale Process Solutions stainless steel 316L batch reactor. 15,150 L (4,000 gal) capacity with 22.4 kW (30 HP) motor.

Capacity (Design):15,150 L (4,000 gal) capacity

Internal Pressure:10 bar (145 psi)

Internal Temperature:150°C (302°F)

Motor Power:22.4 kW (30 HP) motor

Material:Stainless Steel 316L

Manufacturer:Gale Process Solutions

UGE UA-300 Glass-Lined — 1,150 L

New UGE UA-300 glass-lined batch reactor. 1,150 L (300 gal) capacity with flat blade turbine impeller, mechanical seal, and 3.7 kW (5 HP) motor.

Capacity (Design):1,150 L (300 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:232.2°C (450°F)

Motor Power:3.7 kW (5 HP)

Impeller Type:flat blade turbine

Material:Glass-lined construction

Manufacturer:UGE manufacturer

DeDietrich CSA Glass-Lined — 2,850 L

New DeDietrich CSA glass-lined batch reactor. 2,850 L (750 gal) capacity rated for 6.9 bar (100 psi) and 260°C (500°F).

Capacity (Design):2,850 L (750 gal) capacity

Internal Pressure:6.9 bar (100 psi)

Internal Temperature:260°C (500°F)

Material:Glass-lined construction

Model:CSA model

Manufacturer:DeDietrich manufacturer

Advantages of Buying Used Reactors from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver reactors ready for your process.

Significant Cost Savings

Purchasing used reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. With reactors across two subtypes, IPP offers a wide selection to match your budget and specifications.

Immediate Availability

In-stock reactors from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

Multiple OEM Manufacturers

IPP stocks reactors from Pfaudler, DeDietrich, UGE, Gale Process Solutions, and many additional manufacturers. Every unit is an original OEM product with traceable provenance.

Full Range of Materials

IPP offers re-glassed reactors through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts. Re-glassed reactors receive new glass linings on existing vessels.

Global Presence in 15 Countries

IPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.

Proven Process Reliability

Materials include glass-lined, stainless steel, Hastelloy, and titanium. Volume capacity from 2 L to 80,000 L. Pressure ratings from 0.14 to 358.7 bar. ASME, CE/PED, and National Board coded vessels.

How Purchasing a Used Reactor Works

The process of buying a used reactor from IPP follows five steps, from specification to delivery.

Submit Requirements

Share your reactor specifications: capacity, material of construction, pressure rating, temperature, and whether you need agitated or body only. Or browse our searchable inventory.

Receive Data Package

IPP sends a detailed equipment data sheet with capacity, pressure rating, temperature, dimensions, agitator specifications (if applicable), seal type, and condition report with photographs.

Inspect the Equipment

Contact IPP to arrange an on-site visit or request a live video walkthrough of the reactor with an IPP team member at one of our global locations.

Refurbishment Options

IPP offers re-glassing through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional refurbishment services.

Packaging & Delivery

IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries. Contact IPP for shipping details.

Need a Reactor? Ask an IPP Expert.

Tell us your capacity, material, pressure, and temperature requirements. Our team will match your specifications against reactors currently in stock and provide a detailed quote.

Industries That Buy Used Reactors

IPP supplies used reactors to manufacturers across multiple process industries worldwide.

Pharmaceutical

Chemical Processing

Biotechnology

Food & Beverage

Cosmetics

Fine Chemicals

Agrochemicals

Polymers & Resins

Paints & Coatings

Petrochemicals

Available Materials of Construction

IPP stocks reactors across a wide range of materials of construction. The material distribution across the combined reactor inventory is shown below.

Glass-Lined

Glass-lined reactors represent the largest share of inventory. Available from Pfaudler, DeDietrich, UGE, and other manufacturers. Provides corrosion resistance for pharmaceutical, chemical, and specialty processes.

Stainless Steel

Stainless steel reactors available across grades SS 316, SS 316L, SS 304, SS 321, SS Austenitic, and SS 317. Suited for pharmaceutical, food/beverage, biotech, and chemical processing.

Hastelloy, Titanium & Specialty Alloys

Specialty alloy reactors in stock including Hastelloy C-22, C-276, C-4, titanium, Alloy 20, Nickel, Inconel, Monel, and Duplex 2205. For aggressive reaction environments where standard materials are insufficient.

Buying Used Reactors vs Buying New

Purchasing used reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new reactors compare across key factors.

Factor	Used Reactor from IPP	New Reactor (OEM)
Equipment Cost	Significant savings vs new OEM price	Full OEM list price
Delivery Timeline	In-stock units ready to ship	Extended lead times (new fabrication)
Available Capacities	2 L to 80,000 L in stock	Custom-built to specification
Materials	Glass-lined, SS, Hastelloy, Titanium, and specialty alloys	Glass-lined, SS, Hastelloy, Titanium
Pressure Ratings	0.14 to 358.7 bar (from inventory)	Custom-built to specification
Subtypes Available	Agitated and body only in stock	Any configuration as specified
Refurbishment	Re-glassing via UGE division (700+ vessels, 2,700+ parts)	New build from scratch
Compliance	ASME, National Board, CRN, CE/PED coded vessels	Coded to buyer specification

Frequently Asked Questions About Buying Used Reactors

Answers to the most common questions from procurement and project teams evaluating used batch reactors from IPP.

What types of reactors does IPP stock?

IPP stocks two main reactor subtypes: batch-type agitated reactors and batch type body only reactors. Agitated reactors are complete systems with drives, impellers, and seals. Body only reactors are reactor shells without agitation components. Both subtypes are available in multiple materials of construction and condition grades. Browse by subtype: Batch-Type Agitated | Batch Type Body Only

How much can I save purchasing used reactors versus new?

Purchasing used reactors from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on manufacturer, capacity, material of construction, and condition. IPP provides detailed quotes with full specification matching on request. Contact IPP for pricing on specific units from the current reactor inventory.

Does IPP sell new reactors as well as used?

Yes. IPP stocks new reactors from its Gale Process Solutions (GPS) and Universal Glasteel Equipment (UGE) subsidiaries. GPS provides custom fabricated stainless steel equipment with 12–16 week average delivery. UGE provides new and re-glassed glass-lined reactors. Contact IPP for details on new equipment options.

How long does it take to receive a used reactor from IPP?

In-stock reactors are ready to ship. Reactors requiring re-glassing or other custom builds ship on a timeline that depends on scope. IPP's GPS subsidiary provides new custom fabricated equipment with 12–16 week average delivery. IPP ships from offices in 15 countries worldwide.

Can IPP refurbish or re-glass a reactor?

IPP offers re-glassing services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts. Re-glassed reactors receive new glass linings on existing vessels. Contact IPP to discuss refurbishment options for specific reactors.

What is the difference between agitated and body only reactors?

Batch-type agitated reactors are complete systems that include the reactor vessel, agitation drive, impeller, shaft seal, and baffles. Batch type body only reactors are reactor shells — vessel, jacket, heads, and nozzles — sold without agitation components. Body only reactors are suited for buyers who already have drives and agitators or need replacement vessels for existing installations. IPP stocks agitated reactors and body only reactors.

What manufacturers make batch-type agitated reactors?

IPP stocks batch-type agitated reactors from 150+ manufacturers. The largest inventory positions are Pfaudler and DeDietrich, with additional manufacturers including Gale Process Solutions, UGE, Mechanicca Sarda, B. Braun + Diessel Biotech, Schwelm, and many others. Browse all agitated reactors

What manufacturers make body only reactors?

Body only reactors are available from a smaller set of specialized manufacturers. Pfaudler, DeDietrich, and UGE are the primary manufacturers, with EHW Thale, Schwelm, and others also represented. Browse all body only reactors

Can I buy a body only reactor and add my own agitation?

Body only reactors are sold as reactor shells with vessel, jacket, heads, and nozzles. The nozzle schedules on body only reactors typically include openings sized for agitator installation. Buyers commonly pair body only shells with their own existing drives or purchase agitation components separately. Contact IPP for details on specific body only reactor nozzle schedules and agitation compatibility.

What materials of construction are available?

IPP stocks reactors in glass-lined, stainless steel across multiple grades including SS 316, SS 316L, SS 304, SS 321, and austenitic, Hastelloy C-22, C-276, and C-4, titanium, and specialty alloys including Alloy 20, Nickel, Inconel, Monel, and Duplex 2205. Glass-lined is the most common material. Browse the subtype pages for material-specific filtering.

What capacity range is available for used reactors?

IPP stocks reactors with capacities from 2 L (0.5 gal) for pilot-scale and laboratory applications up to 80,000 L (21,150 gal) for large production-scale operations. The largest reactor in stock is a Mechanicca Sarda SS 316L at 80,000 L. Body only reactors range from 94.6 L to 3,800 L. Contact IPP with your capacity requirements for specific matching.

What pressure ratings are available?

Internal pressure ratings range from 0.14 to 358.7 bar across the combined reactor inventory. Full vacuum capability is available on a majority of reactors. Vessels are available coded to ASME, National Board, CRN, CE, and PED standards. Contact IPP with your process pressure requirements for specific matching.

What condition grades are available for used reactors?

IPP stocks reactors in multiple conditions: good used, re-glassed, new, unused/surplus, needs reglass, and refurbished/rebuilt. Re-glassed reactors have received new borosilicate glass linings through IPP's UGE division. Body only reactors are commonly available in re-glassed and used conditions. Contact IPP for condition-specific pricing.

Are reactors available with CE/PED certification alongside ASME?

IPP stocks reactors coded to ASME, National Board, CRN, CE-marked, and PED compliant standards. With offices across Europe and North America, IPP supplies reactors meeting both ASME and CE/PED requirements for global installations. Contact IPP with your specific certification requirements.

Looking for New Reactors?

IPP Group supplies new reactors through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated stainless steel equipment with 12–16 week average delivery. IPP also offers new and re-glassed reactors through its UGE (Universal Glasteel Equipment) division. If you cannot find what you need in our used inventory, we can build or re-glass to your specifications.

Ready to Buy a Used Reactor?

IPP has supplied quality process equipment worldwide since 1980, serving 160,000+ customers. Tell us what you need — our team will respond with matched inventory and pricing.