Buy Used Rising/Falling Film Evaporators for Sale
Buying used rising and falling film evaporators through International Process Plants gives chemical, pharmaceutical, food, and environmental processors access to thin-film tubular evaporators that move liquid up or down heated tubes for high-efficiency evaporation with short residence time from Kleiser Gmbh, Buflovak/Blaw Knox, Pitton-Gessner/Germany, APV, Betchel, and other OEM manufacturers.
Materials of construction include Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321, and Titanium. Evaporation rates range from 12 kg/h (26.5 lb/h) on IPP# 220572 to 36,300 kg/h (80,000 lb/h) on IPP# 225370. Heat transfer surface areas span from 3.8 m² (40.6 ft²) to 1,450 m² (15,850 ft²).
Multi-effect configurations include two-effect systems from Buflovak/Blaw Knox and Swenson. Most units are rated for vacuum service. Available in used condition. Buying used rising and falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.
25+
Evaporators in Stock
1980
Established Since
15
Countries with Offices
PMS Titanium — 36,300 kg/h
IPP# 225370 · Used
Buflovak/Blaw Knox SS 316 — 2-Effect
IPP# 246737 · Used
Kleiser Gmbh SS 316 — 9,400 kg/h
IPP# 706886 · Used
Buy Used Rising/Falling Film Evaporators by Material
Buy Used Stainless Steel Rising/Falling Film Evaporators for Sale
Buflovak/Blaw Knox SS 316 — 6,750 kg/h
Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area.
Evaporation Rate:6,750 kg/h (14,900 lb/h)
Total Heat Transfer Surface Area:262.6 m² (2,850 ft²) surface area
Pressure:8.3 bar (120 psi)
Temperature:148.9 °C (300 °F)
Number of Effects:2-effect, vacuum rated
Condition:Used condition
Swenson SS 316 — 7,250 kg/h
Used Swenson Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 294 m² (3,150 ft²) heat transfer surface area.
Evaporation Rate:7,250 kg/h (16,000 lb/h)
Total Heat Transfer Surface Area:294 m² (3,150 ft²) surface area
Pressure:0.97 bar (14 psi)
Temperature:176.7 °C (350 °F)
Number of Effects:2-effect, vacuum rated
Condition:Used condition
Wiegand SS Austenitic — 14,000 kg/h
Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.
Evaporation Rate:14,000 kg/h (30,850 lb/h)
Total Heat Transfer Surface Area:696 m² (7,500 ft²) surface area
Material:Stainless Steel Austenitic
Vacuum:Vacuum rated, vertical
Condition:Used condition
Buy Used Other Rising/Falling Film Evaporators for Sale
GESSNER Carbon Steel — 6.4 m²
Used GESSNER carbon steel rising/falling film evaporator with 6.4 m² (69 ft²) heat transfer surface area and SS 321 tubes.
Material:Carbon Steel shell
Total Heat Transfer Surface Area:6.4 m² (69 ft²) surface area
Tube Material:SS 321 tubes, vacuum rated
Condition:Used condition
Graphite — 7,400 kg/h
Used graphite rising/falling film evaporator with 7,400 kg/h (16,350 lb/h) evaporation rate, titanium centrifugal pumps, and fiberglass vapor bodies.
Material:Graphite construction
Evaporation Rate:7,400 kg/h (16,350 lb/h)
Pump Details:Titanium centrifugal pumps
Condition:Used condition
Buy Used Titanium Rising/Falling Film Evaporators for Sale
PMS Titanium — 36,300 kg/h
Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.
Evaporation Rate:36,300 kg/h (80,000 lb/h)
Total Heat Transfer Surface Area:1,450 m² (15,850 ft²) surface area
Material:Titanium tubes
Tube Material:Inconel tubesheets
Pressure:1.38 bar (20 psi), vacuum rated
Condition:Used condition
Betchel 130T Titanium — 18,150 kg/h
Used Betchel 130T titanium rising/falling film evaporator with 18,150 kg/h (40,000 lb/h) evaporation rate, mechanical vapor recompression (MVR), and titanium tubes with titanium tubesheets.
Evaporation Rate:18,150 kg/h (40,000 lb/h)
Tube Material:Titanium
Tubesheet Material:Titanium
MVR:Mechanical vapor recompression
Manufacturer:Betchel 130T
Model:skirt-mounted
Condition:Used condition
Buy Used Rising/Falling Film Evaporators for Sale by Manufacturer
Buy Used Kleiser Gmbh Rising/Falling Film Evaporators for Sale
Kleiser Gmbh SS 316 — 9,400 kg/h
Used Kleiser Gmbh Stainless Steel 316 rising/falling film evaporator with 9,400 kg/h (20,700 lb/h) evaporation rate, vacuum rated, with controls included.
Evaporation Rate:9,400 kg/h (20,700 lb/h)
Material:Stainless Steel 316
Pressure:6 bar (87 psi), 200 °C (392 °F)
Vacuum:Vacuum rated
Controls:controls included
Condition:Used condition
Kleiser Gmbh SS Austenitic — 6,700 kg/h
Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 6,700 kg/h (14,750 lb/h) evaporation rate, vertical orientation, vacuum rated.
Evaporation Rate:6,700 kg/h (14,750 lb/h)
Material:Stainless Steel Austenitic
Pressure:6 bar (87 psi), 200 °C (392 °F)
Tube Material:SS 316 tubes and tubesheets
Condition:Used condition
Kleiser Gmbh SS Austenitic — 66.5 m²
Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 66.5 m² (716 ft²) heat transfer surface area and 12 kg/h (26.5 lb/h) evaporation rate.
Total Heat Transfer Surface Area:66.5 m² (716 ft²) surface area
Evaporation Rate:12 kg/h (26.5 lb/h)
Pressure:6 bar (87 psi), 200 °C (392 °F)
Vacuum:Vacuum rated
Condition:Used condition
Buy Used Buflovak/Blaw Knox Rising/Falling Film Evaporators for Sale
Buflovak/Blaw Knox SS 316 — 6,750 kg/h
Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area in a 2-effect configuration.
Evaporation Rate:6,750 kg/h (14,900 lb/h)
Total Heat Transfer Surface Area:262.6 m² (2,850 ft²) surface area
Pressure:8.3 bar (120 psi)
Temperature:148.9 °C (300 °F)
Number of Effects:2-effect, vacuum rated
Condition:Used condition
Buflovak/Blaw Knox SS 304 — 9,550 kg/h
Used Buflovak/Blaw Knox Stainless Steel 304 rising/falling film evaporator with 9,550 kg/h (21,100 lb/h) evaporation rate and 392.1 m² (4,200 ft²) heat transfer surface area in a 2-effect configuration.
Evaporation Rate:9,550 kg/h (21,100 lb/h)
Total Heat Transfer Surface Area:392.1 m² (4,200 ft²) surface area
Pressure:0.97 bar (14 psi)
Temperature:148.9 °C (300 °F)
Number of Effects:2-effect with controls
Controls:vacuum rated
Condition:Used condition
Buflovak/Blaw Knox SS 316 — 7,250 kg/h
Used Buflovak/Blaw Knox Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 83.6 m² (900 ft²) heat transfer surface area.
Evaporation Rate:7,250 kg/h (16,000 lb/h)
Total Heat Transfer Surface Area:83.6 m² (900 ft²) surface area
Pressure:3.4 bar (50 psi)
Temperature:148.9 °C (300 °F)
Material:Stainless Steel 316
Condition:Used condition
Buy Used Rising/Falling Film Evaporators from Other Manufacturers
APV Mitchell SS 316 — 7,600 kg/h
Used APV Mitchell Stainless Steel 316 rising/falling film evaporator with 7,600 kg/h (16,800 lb/h) evaporation rate and 24.9 m² (268 ft²) heat transfer surface area.
Evaporation Rate:7,600 kg/h (16,800 lb/h)
Total Heat Transfer Surface Area:24.9 m² (268 ft²) surface area
Material:Stainless Steel 316
Vacuum:Vacuum rated
Condition:Used condition
Pitton-Gessner/Germany SS Austenitic — 49.8 m²
Used Pitton-Gessner/Germany model 1.4571/H2 Stainless Steel Austenitic rising/falling film evaporator with 49.8 m² (536 ft²) heat transfer surface area, vacuum rated.
Total Heat Transfer Surface Area:49.8 m² (536 ft²) surface area
Material:Stainless Steel Austenitic
Pressure:3 bar (43.5 psi)
Temperature:200 °C (392 °F)
Model:Model 1.4571/H2, vacuum rated
Condition:Used condition
DeSmet SS 316 — 1,350 kg/h
Used DeSmet Stainless Steel 316 rising/falling film evaporator with 1,350 kg/h (3,000 lb/h) evaporation rate and 18 m² (194 ft²) heat transfer surface area, vertical orientation.
Evaporation Rate:1,350 kg/h (3,000 lb/h)
Total Heat Transfer Surface Area:18 m² (194 ft²) surface area
Pressure:3 bar (43.5 psi)
Temperature:160 °C (320 °F)
Material:Stainless Steel 316
Condition:Used condition
Buy Used Rising/Falling Film Evaporators for Sale by Condition
Buy Used Rising/Falling Film Evaporators for Sale
Used PMS Titanium — 36,300 kg/h
Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.
Condition:Used condition
Evaporation Rate:36,300 kg/h (80,000 lb/h)
Total Heat Transfer Surface Area:1,450 m² (15,850 ft²) surface area
Material:Titanium tubes, Inconel tubesheets
Vacuum:Vacuum rated, vertical
Used Wiegand SS Austenitic — 14,000 kg/h
Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.
Condition:Used condition
Evaporation Rate:14,000 kg/h (30,850 lb/h)
Total Heat Transfer Surface Area:696 m² (7,500 ft²) surface area
Material:Stainless Steel Austenitic
Vacuum:Vacuum rated, vertical
Used Paget Equipment SS 304 — 2,250 kg/h
Used Paget Equipment Stainless Steel 304 rising/falling film evaporator with 2,250 kg/h (5,000 lb/h) evaporation rate and 67.4 m² (725 ft²) heat transfer surface area.
Condition:Used condition
Evaporation Rate:2,250 kg/h (5,000 lb/h)
Total Heat Transfer Surface Area:67.4 m² (725 ft²) surface area
Pressure:10.3 bar (150 psi)
Temperature:232.2 °C (450 °F)
Vacuum:Vacuum rated, vertical
Ready to Buy a Used Rising/Falling Film Evaporator?
Buying Used Rising/Falling Film Evaporators vs Buying New
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new build) |
| Materials | Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 | Custom-specified |
| Pressure Ratings | 0.97 bar (14 psi) to 10.3 bar (150 psi) | Custom-built to specification |
| Manufacturers | Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
Advantages of Buying Used Rising/Falling Film Evaporators from IPP
Significant Cost Savings
Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Immediate Availability
In-stock rising/falling film evaporators from IPP are ready to ship. IPP's GPS subsidiary also provides custom-built new equipment with 12–16 week average delivery.
Multiple OEM Manufacturers
IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel and other manufacturers. Every unit is an original OEM product with traceable provenance.
Quality & Refurbishment
IPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Global Presence in 15 Countries
IPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Full Range of Materials & Specs
IPP stocks rising/falling film evaporators across a wide range of specifications to match your process requirements.
How Buying a Used Rising/Falling Film Evaporator Works
1
Submit Requirements
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
2
Receive Data Package
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
3
Inspect the Equipment
Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP specialist at one of our global locations.
4
Refurbishment Options
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
5
Packaging & Delivery
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Industries That Buy Used Rising/Falling Film Evaporators
Chemical Processing
Pharmaceutical
Food & Beverage
Dairy
Petrochemicals
Environmental
Biotechnology
Pulp & Paper
Paints & Coatings
Petrochemicals
Frequently Asked Questions About Buying Used Rising/Falling Film Evaporators
IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Available in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Browse the IMS inventory for current availability.
IPP stocks rising/falling film evaporators in multiple conditions: Used. Browse the current inventory for available condition options.
Yes. IPP stocks new rising/falling film evaporators through its Gale Process Solutions (GPS) subsidiary, which provides custom-built equipment with 12–16 week average delivery. Contact IPP for details on new inventory.
IPP stocks rising/falling film evaporators in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Contact IPP to discuss material requirements for your application.
IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Browse the current inventory to see available manufacturers.
Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on manufacturer, capacity, material of construction, and condition. Contact IPP for pricing on specific units.
In-stock rising/falling film evaporators are ready to ship. IPP's GPS subsidiary provides new custom-built equipment with 12–16 week average delivery. IPP ships from offices in 15 countries worldwide.
IPP coordinates packaging, crating, freight, and delivery to your plant site. With offices in 15 countries and 160,000+ customers served worldwide, IPP has extensive experience in global equipment logistics.
EN 
ES 
FR 
PL 
DE 
AR 
UR 
HI 
NL 
TR 
IT 
UK 
RU 
JA 
PT 
ZH