Buy Used Evaporators for Sale
Buying used evaporators through International Process Plants gives chemical, pharmaceutical, food/beverage, and wastewater treatment manufacturers access to wiped/thin film, rising/falling film, crystalizer, and flash evaporator systems from Luwa SMS, Pfaudler, Wiegand, LCI, SMS Buss, and other OEM manufacturers. Evaporation rates range from 11.3 kg/h (25 lb/h) to 36,300 kg/h (80,000 lb/h), heat transfer areas from 0.47 m² (5.1 ft²) to 1,450 m² (15,850 ft²), and materials span stainless steel 316, 316L, 304, Hastelloy, glass-lined, titanium, and carbon steel. Industrial evaporators are built for decades of continuous service, making used units a durable capital asset. Buying used from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Materials of construction include stainless steel 316, 316L, 304, 321, and austenitic grades, Hastelloy C-22 and C-276, glass-lined, titanium, graphite, and carbon steel. Evaporation rates range from 11.3 kg/h (25 lb/h) to 36,300 kg/h (80,000 lb/h). Heat transfer surface areas range from 0.47 m² (5.1 ft²) to 1,450 m² (15,850 ft²).
Evaporators are available as single-effect or multi-effect systems, with vacuum operation options to protect heat-sensitive materials. Systems integrate with distillation, crystallization, and solvent recovery units, and are designed for clean-in-place (CIP) and automated control systems.
100+
Evaporators in Stock
1980
Established Since
15
Countries with Offices
4
Evaporator Subtypes
Wiped/Thin Film Evaporators
Luwa SMS, Pfaudler, LCI & more
Rising/Falling Film Evaporators
Wiegand, Buflovak, PMS & more
Crystalizer/Evaporators
Gouda, Betchel, Alfa Laval & more
Buy Used Evaporators by Subtype
Buy Used Wiped/Thin Film Evaporators for Sale
SMS Buss LN 1400 — Hastelloy C-22
Used SMS Buss LN 1400 wiped/thin film evaporator. Hastelloy C-22 clad construction with 14 m² (150.7 ft²) heat transfer area and 340.2 kg/h (750 lb/h) evaporation rate.
Evaporation Rate:340.2 kg/h (750 lb/h) rate
Total Heat Transfer Surface Area:14 m² (150.7 ft²) area
Pressure:1.72 bar (25 psi)
Temperature:250°C (482°F)
Vacuum:Vacuum capable
Mechanical Seal on Shaft:mechanical seal
Diameter:850 mm (33.5 in)
Height:6,300 mm (248 in), vertical
Pfaudler Glass-Lined WFE — 10 m²
Re-glassed Pfaudler glass-lined wiped film evaporator with 10 m² (107.6 ft²) heat transfer area and 242.7 kg/h (535 lb/h) evaporation rate. Glass-covered graphite wipers.
Evaporation Rate:242.7 kg/h (535 lb/h) rate
Total Heat Transfer Surface Area:10 m² (107.6 ft²) area
Temperature:200°C (392°F), vacuum capable
Wipers MOC:Glass-covered graphite wipers
Diameter:1,200 mm (47.2 in)
Height:1,050 mm (41.3 in), vertical
Leybold-Heraeus KD300 — SS 316
Used Leybold-Heraeus KD300 wiped/thin film evaporator in stainless steel 316. 3 m² (32.3 ft²) heat transfer area with internal condenser and vacuum capability.
Evaporation Rate:72.6 kg/h (160 lb/h) rate
Total Heat Transfer Surface Area:3 m² (32.3 ft²) area
Pressure:2 bar (29 psi)
Temperature:200°C (392°F)
Internal Condenser:Internal condenser
Internal Condenser size:5 m²
Diameter:500 mm (19.7 in)
Height:3,800 mm (149.6 in), vertica
Buy Used Rising/Falling Film Evaporators for Sale
PMS Titanium — 36,300 kg/h
Used PMS titanium rising/falling film evaporator. 36,300 kg/h (80,000 lb/h) evaporation rate with 1,450 m² (15,850 ft²) heat transfer area. 927 titanium tubes.
Evaporation Rate:36,300 kg/h (80,000 lb/h) rate
Total Heat Transfer Surface Area:1,450 m² (15,850 ft²) area
Number of Tubes:927 titanium tubes
Tube Diameter:50.8 mm (2 in) OD
Pressure:1.38 bar (20 psi)
Temperature:148.9°C (300°F)
Vacuum:Vacuum capable
Tubesheet Material:Inconel tubesheets
Wiegand SS Austenitic — 14,000 kg/h
Used Wiegand rising/falling film evaporator in stainless steel austenitic. 14,000 kg/h (30,850 lb/h) evaporation rate with 696 m² (7,500 ft²) heat transfer area. 806 tubes with SS 316 tube material.
Evaporation Rate:14,000 kg/h (30,850 lb/h) rate
Total Heat Transfer Surface Area:696 m² (7,500 ft²) area
Number of Tubes:806 tubes
Tube Diameter:42.4 mm (1.67 in) OD
Pressure:3 bar (43.5 psi)
Vacuum:vacuum capable
Pump Details:SS centrifugal feed pumps
Buflovak/Blaw Knox SS 316 — 2-Effect
Used Buflovak/Blaw Knox x-320 2-effect rising/falling film evaporator in stainless steel 316. 6,750 kg/h (14,900 lb/h) evaporation rate with 262.6 m² (2,850 ft²) heat transfer area.
Evaporation Rate:6,750 kg/h (14,900 lb/h) rate
Total Heat Transfer Surface Area:262.6 m² (2,850 ft²) area
Number of Effects:2-effect system
Pressure:8.3 bar (120 psi)
Temperature:148.9°C (300°F)
Vacuum:Vacuum capable
Tube Material:SS 316 tubes
Buy Used Crystalizer/Evaporators for Sale
SS 304 Crystalizer — 1,750 kg/h
Used stainless steel 304 crystalizer/evaporator. 21,600 L (5,700 gal) capacity with 1,750 kg/h (3,900 lb/h) evaporation rate and 72.6 m² (781 ft²) heat transfer area. Lightnin agitator with mechanical seal.
Evaporation Rate:1,750 kg/h (3,900 lb/h) rate
Total Heat Transfer Surface Area:72.6 m² (781 ft²) area
Capacity in Gallons:21,600 L (5,700 gal) capacity
Pressure:0.97 bar (14 psi)
Temperature:121.1°C (250°F)
Diameter:2,750 mm (108.3 in)
Height:3,350 mm (131.9 in), vertical
Gouda Cooling Disc Crystallizer — SS 304
Used Gouda C25-1.2 cooling disc crystallizer in stainless steel 304. 3,900 L (1,050 gal) capacity with 16.2 m² (174.4 ft²) heat transfer area. Horizontal orientation with packing seal agitator.
Total Heat Transfer Surface Area:16.2 m² (174.4 ft²) area
Capacity in Gallons:3,900 L (1,050 gal) capacity
Pressure:1 bar (14.5 psi)
Temperature:100°C (212°F)
Orientation:Horizontal
Agitation:Yes
Diameter:1,250 mm (49.2 in)
Height:2,100 mm (82.7 in)
Flash Evaporators: IPP also carries flash evaporators for rapid, single-stage vaporization applications. Flash evaporator inventory is currently being updated. Contact IPP for flash evaporator availability.
Buying Used Evaporators vs Buying New
| Factor | Used Evaporator from IPP | New Evaporator (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new fabrication) |
| Evaporation Rates | 11.3 to 36,300 kg/h in stock | Custom-built to specification |
| Heat Transfer Area | 0.47 to 1,450 m² in stock | Custom-built to specification |
| Materials | SS, Hastelloy, Glass-lined, Titanium, Carbon Steel | Custom-specified |
| Vacuum Capability | Vacuum capable units available | Available as specified |
| Subtypes Available | Wiped film, rising/falling film, crystalizer, flash | Custom-configured |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
Buy Used Evaporators for Sale by Manufacturer
Buy Used Luwa SMS Evaporators for Sale
Luwa SMS HS0050 — SS 316
Used Luwa SMS HS0050 wiped/thin film evaporator in stainless steel 316. 0.5 m² (5.4 ft²) heat transfer area with 11.3 kg/h (25 lb/h) evaporation rate. Vacuum capable.
Evaporation Rate:11.3 kg/h (25 lb/h) rate
Total Heat Transfer Surface Area:0.5 m² (5.4 ft²) area
Temperature:200°C (392°F), vacuum capable
Drive Motor HP:14.9 kW (20 HP) drive motor
Diameter:152.4 mm (6 in)
Height:1,850 mm (72.8 in), vertical
Luwa SMS SS 316L — 10 m²
Used Luwa SMS wiped/thin film evaporator in stainless steel 316L. 10 m² (107.6 ft²) heat transfer area with 242.7 kg/h (535 lb/h) evaporation rate.
Evaporation Rate:242.7 kg/h (535 lb/h) rate
Total Heat Transfer Surface Area:10 m² (107.6 ft²) area
Pressure:4.5 bar (65.3 psi)
Diameter:800 mm (31.5 in)
Height:6,000 mm (236.2 in), vertical
Top Head type:Dish
Bottom Head Type:Cone
Luwa SMS L-425 — SS Austenitic
Used Luwa SMS L-425 wiped/thin film evaporator in stainless steel austenitic. 3.2 m² (34.4 ft²) heat transfer area. 230°C (446°F) temperature rating.
Total Heat Transfer Surface Area:3.2 m² (34.4 ft²) area
Temperature:230°C (446°F)
Diameter:559 mm (22 in)
Height:2,200 mm (86.6 in), vertical
Material:Stainless steel austenitic
Condition:Used condition
Buy Used Buss-SMS-Canzler Evaporators for Sale
Buss-SMS-Canzler LN-1400 — SS 316
Used Buss-SMS-Canzler LN-1400 wiped/thin film evaporator in stainless steel 316. 13.9 m² (150 ft²) heat transfer area. Vacuum capable with 14.9 kW (20 HP) drive motor.
Total Heat Transfer Surface Area:13.9 m² (150 ft²) area
Temperature:343.3°C (650°F)
Vacuum:Vacuum capable
Drive Motor HP:14.9 kW (20 HP) drive motor
Bottom Head Type:Flat top, cone bottom
Buss-SMS-Canzler SS 316 — 6.5 m²
Used Buss-SMS-Canzler wiped/thin film evaporator in stainless steel 316. 6.5 m² (70 ft²) heat transfer area with 158.8 kg/h (350 lb/h) evaporation rate. Internal condenser, graphite wipers.
Evaporation Rate:158.8 kg/h (350 lb/h) rate
Total Heat Transfer Surface Area:6.5 m² (70 ft²) area
Pressure:5 bar (72.5 psi)
Temperature:250°C (482°F)
Internal Condenser:Internal condenser
Wipers MOC:graphite wipers
Diameter:900 mm (35.4 in)
Height:4,700 mm (185 in), vertical
Buss-SMS-Canzler 900/6,5-K10 — SS 316
Used Buss-SMS-Canzler 900/6,5-K10 wiped/thin film evaporator in stainless steel 316. 6.5 m² (70 ft²) heat transfer area.
Total Heat Transfer Surface Area:6.5 m² (70 ft²) area
Material:Stainless Steel 316
Model:Model 900/6,5-K10
Subtype:Wiped/thin film type
Condition:Used condition
Buy Used Evaporators from Other Manufacturers
Pfaudler SS 316L WFE — 3.3 m²
Used Pfaudler wiped/thin film evaporator in stainless steel 316L. 3.3 m² (35 ft²) heat transfer area with 79.4 kg/h (175 lb/h) evaporation rate. Vacuum capable.
Evaporation Rate:79.4 kg/h (175 lb/h) rate
Total Heat Transfer Surface Area:3.3 m² (35 ft²) area
Pressure:1.03 bar (15 psi)
Temperature:343.3°C (650°F)
Vacuum:Vacuum capable
Diameter:914 mm (36 in)
Height:1,100 mm (43.3 in), vertical
Carl Canzler 900/6,0-K10 — SS 316L
Used Carl Canzler 900/6,0-K10 wiped/thin film evaporator in stainless steel 316L. 6 m² (64.6 ft²) heat transfer area with 145.1 kg/h (320 lb/h) evaporation rate.
Evaporation Rate:145.1 kg/h (320 lb/h) rate
Total Heat Transfer Surface Area:6 m² (64.6 ft²) area
Material:Stainless Steel 316L
Model:Model 900/6,0-K10
Condition:Used condition
DeSmet Rising/Falling Film — SS 316
Used DeSmet rising/falling film evaporator in stainless steel 316. 18 m² (194 ft²) heat transfer area with 1,350 kg/h (3,000 lb/h) evaporation rate.
Evaporation Rate:1,350 kg/h (3,000 lb/h) rate
Total Heat Transfer Surface Area:18 m² (194 ft²) area
Pressure:3 bar (43.5 psi)
Temperature:160°C (320°F)
Condition:Used condition
Buy Used Evaporators for Sale by Condition
Buy Used Evaporators for Sale
Used APV Mitchell SS 316 — 7,600 kg/h
Used APV Mitchell rising/falling film evaporator in stainless steel 316. 24.9 m² (268 ft²) heat transfer area with 7,600 kg/h (16,800 lb/h) evaporation rate.
Condition:Used condition
Evaporation Rate:7,600 kg/h (16,800 lb/h) rate
Total Heat Transfer Surface Area:24.9 m² (268 ft²) area
Material:Stainless Steel 316
Subtype:Rising/falling film type
Used Buflovak/Blaw Knox SS 316 — 7,250 kg/h
Used Buflovak/Blaw Knox rising/falling film evaporator in stainless steel 316. 83.6 m² (900 ft²) heat transfer area with 7,250 kg/h (16,000 lb/h) evaporation rate.
Condition:Used condition
Evaporation Rate:7,250 kg/h (16,000 lb/h) rate
Total Heat Transfer Surface Area:83.6 m² (900 ft²) area
Material:Stainless Steel 316
Subtype:Rising/falling film type
Used Struthers Wells SS 304 — 1,100 kg/h
Used Struthers Wells Inc. crystalizer/evaporator in stainless steel 304. 44.1 m² (475 ft²) heat transfer area with 1,100 kg/h (2,400 lb/h) evaporation rate.
Condition:Used condition
Evaporation Rate:1,100 kg/h (2,400 lb/h) rate
Total Heat Transfer Surface Area:44.1 m² (475 ft²) area
Pressure:3.4 bar (50 psi)
Temperature:145°C (293°F)
Subtype:Crystalizer/evaporator type
Buy Unused Evaporators for Sale
Unused Pfaudler 103.4-36V-274 — SS 304
Unused Pfaudler 103.4-36V-274 wiped/thin film evaporator in stainless steel 304. 9.5 m² (102 ft²) heat transfer area with 226.8 kg/h (500 lb/h) evaporation rate. Internal condenser, chevron graphite wipers.
Condition:Unused condition
Evaporation Rate:226.8 kg/h (500 lb/h) rate
Total Heat Transfer Surface Area:9.5 m² (102 ft²) area
Pressure:5.9 bar (85 psi)
Temperature:300°C (572°F)
Internal Condenser:Internal condenser
Wipers MOC:graphite wipers
Unused Chema Balke Dürr RDA350 — SS 316
Unused Chema Balke Dürr GmbH RDA350/2.5-A wiped/thin film evaporator in stainless steel 316. 2.6 m² (27.7 ft²) heat transfer area with 61.2 kg/h (135 lb/h) evaporation rate. Vacuum capable.
Condition:Unused condition
Evaporation Rate:61.2 kg/h (135 lb/h) rate
Total Heat Transfer Surface Area:2.6 m² (27.7 ft²) area
Pressure:2 bar (29 psi)
Temperature:180°C (356°F)
Diameter:406.4 mm (16 in)
Height:2,350 mm (92.5 in), vertical
Buy Re-glassed Evaporators for Sale
Re-glassed Pfaudler WFE — Glass-Lined
Re-glassed Pfaudler glass-lined wiped film evaporator with 10 m² (107.6 ft²) heat transfer area and 242.7 kg/h (535 lb/h) evaporation rate. Glass-covered graphite wipers.
Condition:Re-glassed condition
Evaporation Rate:242.7 kg/h (535 lb/h) rateTotal Heat Transfer Surface Area:10 m² (107.6 ft²) area
Material:Glass-lined construction
Wipers MOC:Glass-covered graphite wipers
Re-glassed Pfaudler Crystalizer — Glass-Lined
Re-glassed Pfaudler glass-lined crystalizer/evaporator. Vertical orientation with 914 mm (36 in) diameter and 711 mm (28 in) height. 4-leg support.
Condition:Re-glassed condition
Material:Glass-lined construction
Diameter:914 mm (36 in)
Height:711 mm (28 in), vertical
Support Type:4-leg support
Bottom Head Type:Dish bottom, welded
Advantages of Buying Used Evaporators from IPP
Significant Cost Savings
Buying used evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. With evaporators from multiple manufacturers in stock, IPP offers a wide selection to match your budget and specifications.
Immediate Availability
In-stock evaporators from IPP are ready to ship. New OEM evaporators require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.
Multiple OEM Manufacturers
IPP stocks evaporators from Luwa SMS, Pfaudler, Wiegand, LCI, SMS Buss, Buflovak, Leybold-Heraeus, Gouda, and many additional manufacturers. Every unit is an original OEM product with traceable provenance.
4 Evaporator Subtypes
IPP stocks evaporators across 4 subtypes: wiped/thin film, rising/falling film, crystalizer/evaporator, and flash. Each type addresses different viscosity, throughput, and heat sensitivity requirements.
Global Presence in 15 Countries
IPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Full Range of Materials & Specs
Materials include stainless steel, Hastelloy, glass-lined, titanium, graphite, and carbon steel. Evaporation rates range from 11.3 to 36,300 kg/h. Heat transfer areas range from 0.47 to 1,450 m². Vacuum capable units available across all subtypes.
How Buying a Used Evaporator Works
1
Submit Requirements
Share your evaporator specifications: evaporation rate, material of construction, heat transfer area, temperature, and application. Or browse our searchable inventory.
2
Receive Data Package
IPP sends a detailed equipment data sheet with evaporation rate, heat transfer area, pressure rating, temperature, dimensions, tube specifications, and condition report with photographs.
3
Inspect the Equipment
Contact IPP to arrange an on-site visit or request a live video walkthrough of the evaporator with an IPP team member at one of our global locations.
4
Refurbishment Options
IPP offers re-glassing through its UGE division for glass-lined evaporators. Contact IPP for details on refurbishment and reconditioning services.
5
Packaging & Delivery
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries. Contact IPP for shipping details.
Need an Evaporator? Ask an IPP Expert.
Browse All Evaporator Types
Industries That Buy Used Evaporators
Chemical Processing
Pharmaceutical
Food & Beverage
Wastewater Treatment
Biotechnology
Fine Chemicals
Petrochemicals
Agrochemicals
Paints & Coatings
Solvent Recovery
Cosmetics (selected bulk or base formulation blending applications)
Pharmaceutical (non-sterile, non-GMP, or bulk solid and intermediate processing applications)
Biotechnology (limited, non-cell-culture and non-sterile auxiliary material processing applications)
Frequently Asked Questions About Buying Used Evaporators
IPP stocks evaporators across 4 subtypes: wiped/thin film, rising/falling film, crystalizer/evaporator, and flash evaporators. Materials include stainless steel, Hastelloy, glass-lined, titanium, graphite, and carbon steel. Browse the IMS inventory for current availability.
IPP stocks evaporators from a wide range of manufacturers including Luwa SMS, Pfaudler, LCI, SMS Buss, Leybold-Heraeus, Wiegand, Buflovak/Blaw Knox, Alfa Laval, Gouda, DeDietrich, Artisan, Carl Canzler, Hitachi, Pope Scientific, and many others. Browse the current inventory to see available manufacturers and models.
IPP stocks evaporators in good used, re-glassed, and surplus condition. Re-glassed evaporators have received new glass linings through IPP's UGE division. Contact IPP for condition details on specific units.
IPP primarily stocks used and surplus evaporators. IPP's Gale Process Solutions (GPS) subsidiary can provide custom fabricated equipment with 12–16 week average delivery. Contact IPP to discuss new fabrication options for evaporators.
Evaporation rates across IPP's evaporator inventory range from 11.3 kg/h (25 lb/h) for laboratory and pilot-scale applications up to 36,300 kg/h (80,000 lb/h) for large production-scale operations. The largest evaporator in stock is a PMS titanium rising/falling film unit at 36,300 kg/h (80,000 lb/h).
Heat transfer surface areas range from 0.47 m² (5.1 ft²) for compact pilot units up to 1,450 m² (15,850 ft²) for large-scale industrial evaporators. Contact IPP with your heat transfer requirements and our team will identify matching units.
IPP stocks evaporators in stainless steel 316, 316L, 304, 321, and austenitic grades, Hastelloy C-22 and C-276, glass-lined, titanium, graphite, rubber-lined, and carbon steel construction. The most common material is stainless steel 316. Contact IPP with your corrosion resistance requirements for recommendations.
Many evaporators in IPP's inventory are vacuum capable. Vacuum operation is used to protect heat-sensitive materials by lowering the boiling point during evaporation. Browse the inventory or contact IPP to identify vacuum-rated units.
A wiped film evaporator (also called thin film evaporator) uses mechanical wipers or blades to spread liquid feed into a thin film across a heated cylindrical surface. This creates very short residence times and gentle evaporation, making these units ideal for viscous, heat-sensitive, and fouling-prone materials. IPP stocks wiped/thin film evaporators from manufacturers including Luwa SMS, Pfaudler, LCI, and SMS Buss.
Rising and falling film evaporators use vertical tube bundles where liquid feed flows by gravity (falling film) or is carried upward by rising vapor (rising film). These evaporators are designed for high-throughput, continuous concentration of low-viscosity liquids with short contact times. IPP stocks rising/falling film evaporators from manufacturers including Wiegand, Buflovak/Blaw Knox, PMS, and APV.
Crystallizer/evaporators combine the functions of evaporation and crystallization into a single system. They concentrate solutions beyond the saturation point to precipitate dissolved solids as crystals. These systems are used for salt recovery, zero liquid discharge (ZLD), and chemical purification. IPP stocks crystallizer/evaporator units from manufacturers including Alfa Laval, Betchel, Gouda, and Pfaudler.
Falling film evaporators rely on gravity to create a thin film inside vertical tubes, making them suited for high-volume, low-viscosity liquids. Wiped film evaporators use mechanical wipers to physically distribute the liquid across the heated surface, making them better suited for viscous, fouling-prone, or heat-sensitive materials where controlled film thickness and short residence time are critical.
Yes. IPP stocks multi-effect evaporator systems, including a 2-effect Buflovak/Blaw Knox rising/falling film evaporator (IPP# 246737). Multi-effect evaporators reuse vapor from one stage to heat the next, reducing overall steam consumption and operational costs. Contact IPP for current multi-effect system availability.
Buying used evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on manufacturer, size, material of construction, and condition. IPP provides detailed quotes with full specification matching on request. Contact IPP for pricing on specific units from our current evaporator inventory.
In-stock evaporators are ready to ship. Evaporators requiring refurbishment or other work ship on a timeline that depends on scope. IPP's GPS subsidiary provides new custom fabricated equipment with 12–16 week average delivery. Contact IPP for specific lead times on units of interest. IPP ships from offices in 15 countries worldwide.
Contact IPP to arrange a visit or discuss inspection options for specific equipment. IPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States.
Yes. Many used evaporators can be reconfigured with new instrumentation, controls, or materials of construction to meet changing process needs. Contact IPP to discuss modification options for specific units.
IPP coordinates packaging, crating, freight, and delivery to your plant site. With offices in 15 countries and 160,000+ customers served worldwide, IPP has extensive experience in global equipment logistics. Contact IPP to discuss shipping and logistics for specific equipment.
EN 
ES 
FR 
PL 
DE 
AR 
UR 
HI 
NL 
TR 
IT 
UK 
RU 
JA 
PT 
ZH