Buy Used Spray Dryers for Sale
Buying used spray dryers through International Process Plants gives pharmaceutical, food and dairy, and chemical manufacturers access to chamber dryers that atomize liquid feed into a hot gas stream for rapid powder production from Niro, Mazzoni, Bowen Engineering Inc, Tetre, and other OEM manufacturers.
Materials of construction span Stainless Steel 304, Stainless Steel 316, and Stainless Steel Other grades. Drying chamber diameters range from 431.8 mm (17 in) on IPP# 222747 to 7,000 mm (275.6 in) on IPP# 220469. Atomizer types include rotary disc-wheel, single fluid pressure nozzle, two fluid atomizing nozzle, and inline mixing nozzle designs. IPP carries Niro inventory across the F10, F35H, F60, FSD, SD, and TS model families
Anhydro units in stock cover the III-A series, alongside Bowen Engineering BE-1410 and Type CC and Tetre Type 150 chambers. All current spray dryer listings are offered in used condition. Gas-fired heating is the dominant attested heat source across the listings that disclose a heating type. Buying used spray dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
30+
Spray Dryers in Stock
1980
Established Since
15
Countries with Offices
Buy Used Spray Dryers by Material
Buy Used Stainless Steel Spray Dryers for Sale
Niro FSD-0050-N — 3,000 mm (118.1 in) chamber
Used Niro FSD-0050-N stainless steel 316 spray dryer with 3,000 mm (118.1 in) drying chamber and 350 kg/h evaporation rate.
Material:Stainless Steel 316
Manufacturer:Niro
Model:FSD-0050-N
Diameter:3,000 mm (118.1 in) chamber
Atomizer Type:Single Fluid Pressure Nozzle
Evaporation Rate:350 kg/h (772 lb/h) evaporation
Niro Stainless Steel 304 — 3,650 mm (143.7 in) chamber
Used Niro stainless steel 304 spray dryer with 3,650 mm (143.7 in) drying chamber, rotary disc-wheel atomizer, and 544 kg/h evaporation rate.
Material:Stainless Steel 304
Manufacturer:Niro
Diameter:3,650 mm (144 in) chamber
Atomizer Type:Rotary Disc-Wheel
Evaporation Rate:544 kg/h (1,200 lb/h) evaporation
Tetre Type 150 — 2,500 mm (98.4 in) chamber
Used Tetre Type 150 stainless steel 304 spray dryer with 2,500 mm (98.4 in) drying chamber and 160 kg/h evaporation rate.
Material:Stainless Steel 304
Manufacturer:Tetre
Model:Type 150
Diameter:2,500 mm (98.4 in) chamber
Atomizer Type:Single Fluid Pressure Nozzle
Evaporation Rate:160 kg/h (352.7 lb/h) evaporation
Buy Used Other Spray Dryers for Sale
Niro F10-FBC18
Used Niro F10-FBC18 spray dryer with rotary disc-wheel atomizer.
Manufacturer:Niro
Model:F10-FBC18
Atomizer Type:Rotary Disc-Wheel
Height:980 mm (38.6 in) height
Condition:Used condition
Bowen Engineering Type CC — 431.8 mm (17 in) chamber
Used Bowen Engineering Inc Type CC spray dryer with 431.8 mm (17 in) chamber and rotary disc-wheel atomizer.
Manufacturer:Bowen Engineering Inc
Model:Type CC
Diameter:431.8 mm (17 in) chamber
Atomizer Type:Rotary Disc-Wheel
Condition:Used condition
Mazzoni Spray Dryer
Used Mazzoni spray dryer offered in used condition.
Manufacturer:Mazzoni
Type:Dryer-Spray
Condition:Used condition
Buy Used Spray Dryers for Sale by Manufacturer
Buy Used Niro Spray Dryers for Sale
Niro FSD-0050-N — 3,000 mm (118.1 in) chamber
Used Niro FSD-0050-N stainless steel 316 spray dryer with 3,000 mm (118.1 in) chamber and 250 deg C inlet temperature.
Manufacturer:Niro
Model:FSD-0050-N
Material:Stainless Steel 316
Diameter:3,000 mm (118.1 in) chamber
Inlet Temperature:250 °C (482 °F) inlet
Evaporation Rate:350 kg/h (772 lb/h) evaporation
Niro SD-25 N-R — 3,400 mm (133.9 in) chamber
Used Niro SD-25 N-R stainless steel 304 spray dryer with 3,400 mm (133.9 in) chamber and 435 deg C inlet temperature.
Manufacturer:Niro
Model:SD-25 N-R
Material:Stainless Steel 304
Diameter:3,400 mm (133.9 in) chamber
Atomizer Type:Rotary Disc-Wheel
Inlet Temperature:435 °C (815 °F) inlet
Niro Utility Unit — 1,200 mm (47.2 in) chamber
Used Niro Utility Unit stainless steel 304 spray dryer with 1,200 mm (47.2 in) chamber and single fluid pressure nozzle atomizer.
Manufacturer:Niro
Model:Utility Unit
Material:Stainless Steel 304
Diameter:1,200 mm (48 in) chamber
Atomizer Type:Single Fluid Pressure Nozzle
Evaporation Rate:9.1 kg/h (20 lb/h) evaporation
Buy Used Mazzoni Spray Dryers for Sale
Mazzoni Spray Dryer (IPP# 237065)
Used Mazzoni spray dryer offered in used condition.
Manufacturer:Mazzoni
Type:Dryer-Spray
Condition:Used condition
Mazzoni Spray Dryer (IPP# 237066)
Used Mazzoni spray dryer offered in used condition.
Manufacturer:Mazzoni
Type:Dryer-Spray
Condition:Used condition
Mazzoni Spray Dryer (IPP# 237067)
Used Mazzoni spray dryer offered in used condition.
Manufacturer:Mazzoni
Type:Dryer-Spray
Condition:Used condition
Buy Used Spray Dryers from Other Manufacturers for Sale
Tetre Type 150 — 2,500 mm (98.4 in) chamber
Used Tetre Type 150 stainless steel 304 spray dryer with 2,500 mm (98.4 in) chamber and 8,000 m3/h air flow rate.
Manufacturer:Tetre
Model:Type 150
Material:Stainless Steel 304
Diameter:2,500 mm (98.4 in) chamber
Atomizer Type:Single Fluid Pressure Nozzle
Air Flow Rate:8,000 m3/h (4,700 CFM) air flow
Anhydro III-A size #2 — 2,400 mm (94.5 in) chamber
Used Anhydro III-A size #2 stainless steel 304 spray dryer with 2,400 mm (94.5 in) chamber and rotary disc-wheel atomizer.
Manufacturer:Anhydro
Model:III-A size #2
Material:Stainless Steel 304
Diameter:2,400 mm (94.3 in) chamber
Atomizer Type:Rotary Disc-Wheel
Evaporation Rate:40.8 kg/h (90 lb/h) evaporation
Bowen Engineering BE-1410 — 800 mm (31.5 in) chamber
Used Bowen Engineering Inc BE-1410 spray dryer with 800 mm (31.5 in) chamber, single fluid pressure nozzle, and 500 deg C inlet temperature.
Manufacturer:Bowen Engineering Inc
Model:BE-1410
Material:Stainless Steel Other
Diameter:800 mm (31.5 in) chamber
Atomizer Type:Single Fluid Pressure Nozzle
Inlet Temperature:500 °C (932 °F) inlet
Buy Used Spray Dryers by Condition
Buy Used Spray Dryers in Used Condition for Sale
APV Anhydro — 1,250 mm (49.2 in) chamber
Used APV Anhydro stainless steel 316 spray dryer with 1,250 mm (49.2 in) chamber, two fluid atomizing nozzle, and 354 deg C inlet temperature.
Condition:Used condition
Manufacturer:APV Anhydro
Material:Stainless Steel 316
Diameter:1,250 mm (49 in) chamber
Atomizer Type:Two Fluid Atomizing Nozzle
Niro Stainless Steel 304 — 7,000 mm (275.6 in) chamber
Used Niro stainless steel 304 spray dryer with 7,000 mm (275.6 in) chamber and 1,800 kg/h evaporation rate.
Condition:Used condition
Manufacturer:Niro
Material:Stainless Steel 304
Diameter:7,000 mm (275.6 in) chamber
Evaporation Rate:1,800 kg/h (3,950 lb/h) evaporation
Anhydro III-A no.4 — 2,600 mm (102.4 in) chamber
Used Anhydro type III-A no.4 stainless steel 304 spray dryer with 2,600 mm (102.4 in) chamber and rotary disc-wheel atomizer.
Condition:Used condition
Manufacturer:Anhydro
Model:type III-A no.4 ANHYDRO
Material:Stainless Steel 304
Diameter:2,600 mm (102 in) chamber
Atomizer Type:Rotary Disc-Wheel
Ready to Buy a Used Spray Dryer?
Buying Used Spray Dryers vs Buying New
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new fabrication) |
| Materials | Stainless Steel 304, Stainless Steel 316, Stainless Steel Other | Custom-specified |
| Pressure Ratings | 1.3 bar (18.9 psi) | Custom-built to specification |
| Manufacturers | Niro, Mazzoni, Bowen Engineering Inc and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
Advantages of Buying Used Spray Dryers from IPP
Significant Cost Savings
Buying used spray dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Immediate Availability
In-stock spray dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.
Multiple OEM Manufacturers
IPP stocks spray dryers from Niro, Mazzoni, Bowen Engineering Inc, Tetre and other manufacturers. Every unit is an original OEM product with traceable provenance.
Quality & Refurbishment
IPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Global Presence in 15 Countries
IPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Full Range of Materials & Specs
IPP stocks spray dryers across a wide range of specifications to match your process requirements.
How Buying a Used Spray Dryer Works
1
Submit Requirements
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
2
Receive Data Package
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
3
Inspect the Equipment
Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP team member at one of our global locations.
4
Refurbishment Options
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
5
Packaging & Delivery
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Industries That Buy Used Spray Dryers
Pharmaceutical
Chemical Processing
Food & Beverage
Biotechnology
Agrochemicals
Fine Chemicals
Mining & Minerals
Cosmetics
Paints & Coatings
Petrochemicals
Frequently Asked Questions About Buying Used Spray Dryers
IPP stocks spray dryers from Niro, Mazzoni, Bowen Engineering Inc, Tetre, Anhydro and other manufacturers. Available in Stainless Steel 304, Stainless Steel 316, Stainless Steel Other construction. Browse the IMS inventory for current availability.
IPP stocks spray dryers in multiple conditions: Used. Browse the current inventory for available condition options.
Yes. IPP stocks new spray dryers through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. Contact IPP for details on new inventory.
IPP stocks spray dryers in Stainless Steel 304, Stainless Steel 316, Stainless Steel Other construction. Contact IPP to discuss material requirements for your application.
IPP stocks spray dryers from Niro, Mazzoni, Bowen Engineering Inc, Tetre, Anhydro and other manufacturers. Browse the current inventory to see available manufacturers.
Buying used spray dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on manufacturer, capacity, material of construction, and condition. Contact IPP for pricing on specific units.
In-stock spray dryers are ready to ship. IPP's GPS subsidiary provides new custom fabricated equipment with 12–16 week average delivery. IPP ships from offices in 15 countries worldwide.
IPP coordinates packaging, crating, freight, and delivery to your plant site. With offices in 15 countries and 160,000+ customers served worldwide, IPP has extensive experience in global equipment logistics.
EN 
ES 
FR 
PL 
DE 
AR 
UR 
HI 
NL 
TR 
IT 
UK 
RU 
JA 
PT 
ZH