Buy Used Porcupine Dryers for Sale
Buying used porcupine dryers through International Process Plants gives chemical, wastewater, food, and biomass buyers access to indirect dryers that use a heated, paddle-studded rotor inside a jacketed trough to break up and dry sludges and wet solids continuously from Gale Process Solutions and other OEM manufacturers.
Materials of construction include Stainless Steel 316 and Stainless Steel 304. Diameters range from 304.8 mm (12 in) on IPP# 76672 to 1,050 mm (42 in) on IPP# 246885. Lengths range from 914 mm (36 in) to 3,050 mm (120 in).
IPP stocks Gale Process Solutions units across the 1P4210 and 1P1203 model families. Condition options include used and unused stock. These units serve continuous drying of thick pastes, slurries, and viscous solids. Buying used porcupine dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
15,000+
Equipment Pieces in IPP Inventory
1980
Established Since
15
Countries with Offices
Pfaudler Hastelloy C-276 — 355.6 mm (14 in)
Used · Spring-assist hinge
Buy Used Porcupine Dryers by Material
Buy Used Stainless Steel 316 Porcupine Dryers for Sale
Gale Process Solutions SS 316 — 304.8 mm (12 in)
Used Gale Process Solutions Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
Material:Stainless Steel 316
Condition:Used condition
Manufacturer:Gale Process Solutions
Model:1P1203JTC-S
Diameter:304.8 mm (12 in)
Length:914 mm (36 in)
Porcupine Operating Pressure:10.3 bar (150 psi) operating pressure
Gale Process Solutions SS 316 — Unused
Unused Gale Process Solutions Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
Material:Stainless Steel 316
Condition:Unused condition
Manufacturer:Gale Process Solutions
Model:1P1203JTB
Diameter:304.8 mm (12 in)
Length:914 mm (36 in)
Porcupine Operating Pressure:10.3 bar (150 psi) operating pressure
Buy Used Stainless Steel 304 Porcupine Dryers for Sale
Gale Process Solutions SS 304 — 1,050 mm (41.3 in)
Used Gale Process Solutions Stainless Steel 304 dryer-porcupine. 1,050 mm (42 in) diameter x 3,050 mm (120 in) length with 2.6 m3 (90.8 ft3) total working volume.
Material:Stainless Steel 304
Condition:Used condition
Manufacturer:Gale Process Solutions
Model:1P4210JTB
Diameter:1,050 mm (42 in)
Length:3,050 mm (120 in)
Total Heat Transfer Surface Area:44 m² (474 ft²) total heat transfer area
Buy Used Porcupine Dryers for Sale by Manufacturer
Buy Used Gale Process Solutions Porcupine Dryers for Sale
Gale 1P4210JTB — SS 304
Used Gale Process Solutions 1P4210JTB Stainless Steel 304 dryer-porcupine with 2.6 m3 (90.8 ft3) total working volume and 44 m2 total heat transfer surface area.
Material:Stainless Steel 304
Diameter:1,050 mm (42 in)
Length:3,050 mm (120 in)
Total Working Volume:2.6 m3 (90.8 ft3) working volume
Total Heat Transfer Surface Area:44 m² (474 ft²) heat transfer area
Condition:Used condition
Gale 1P1203JTC-S — SS 316
Used Gale Process Solutions 1P1203JTC-S Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
Material:Stainless Steel 316
Diameter:304.8 mm (12 in)
Length:914 mm (36 in)
Porcupine Operating Pressure:10.3 bar (150 psi) operating pressure
Total Heat Transfer Surface Area:2.2 m² (24 ft²) heat transfer area
Condition:Used condition
Gale 1P1203JTB — SS 316 Unused
Unused Gale Process Solutions 1P1203JTB Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length.
Material:Stainless Steel 316
Diameter:304.8 mm (12 in)
Length:914 mm (36 in)
Porcupine Operating Pressure:10.3 bar (150 psi) operating pressure
Total Heat Transfer Surface Area:1.83 m² (19.7 ft²) heat transfer area
Condition:Unused condition
Buy Used Porcupine Dryers for Sale by Condition
Buy Used Porcupine Dryers for Sale
Used Gale 1P4210JTB — SS 304
Used Gale Process Solutions 1P4210JTB Stainless Steel 304 dryer-porcupine with 1,050 mm (42 in) diameter, 3,050 mm (120 in) length, and 2.6 m3 (90.8 ft3) total working volume.
Condition:Used condition
Material:Stainless Steel 304
Diameter:1,050 mm (42 in)
Length:3,050 mm (120 in)
Total Working Volume:2.6 m3 (90.8 ft3) working volume
Total Heat Transfer Surface Area:44 m² (474 ft²) heat transfer area
Used Gale 1P1203JTC-S — SS 316
Used Gale Process Solutions 1P1203JTC-S Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length with 10.3 bar (150 psi) operating pressure.
Condition:Used condition
Material:Stainless Steel 316
Diameter:304.8 mm (12 in)
Length:914 mm (36 in)
Porcupine Operating Pressure:10.3 bar (150 psi) operating pressure
Total Heat Transfer Surface Area:2.2 m² (24 ft²) heat transfer area
Buy Unused Porcupine Dryers for Sale
Unused Gale 1P1203JTB — SS 316
Unused Gale Process Solutions 1P1203JTB Stainless Steel 316 dryer-porcupine. 304.8 mm (12 in) diameter x 914 mm (36 in) length with 10.3 bar (150 psi) operating pressure.
Condition:Unused condition
Material:Stainless Steel 316
Diameter:304.8 mm (12 in)
Length:914 mm (36 in)
Porcupine Operating Pressure:10.3 bar (150 psi) operating pressure
Total Heat Transfer Surface Area:1.83 m² (19.7 ft²) heat transfer area
Ready to Buy a Used Porcupine Dryer?
Buying Used Porcupine Dryers vs Buying New
Buying used porcupine dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new porcupine dryers compare across key factors.
| Factor | Used from IPP | New (OEM) |
|---|---|---|
| Equipment Cost | Significant savings vs new OEM price | Full OEM list price |
| Delivery Timeline | In-stock units ready to ship | Extended lead times (new OEM order) |
| Materials | Stainless Steel 304, Stainless Steel Austenitic | Custom-specified |
| Pressure Ratings | 0.97 bar (14 psi) to 10 bar (145 psi) | Custom-built to specification |
| Manufacturers | Gale Process Solutions and others | Single OEM |
| Environmental Impact | Extends equipment lifecycle, reduces waste | New raw material consumption |
Advantages of Buying Used Porcupine Dryers from IPP
Significant Cost Savings
Buying used porcupine dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.
Immediate Availability
In-stock porcupine dryers from IPP are ready to ship. IPP's GPS subsidiary also supplies new custom-built equipment with 12–16 week average delivery.
Multiple OEM Manufacturers
IPP stocks porcupine dryers from Gale Process Solutions and other manufacturers. Every unit is an original OEM product with traceable provenance.
Quality & Refurbishment
IPP offers refurbishment services through its UGE (Universal Glasteel Equipment) division, founded in 1995, which stocks 700+ vessels and 2,700+ parts.
Global Presence in 15 Countries
IPP operates offices in 15 countries: Brazil, Canada, China, Czech Republic, France, Germany, India, Italy, Mexico, Pakistan, Portugal, Romania, Turkey, United Kingdom, and United States. IPP has served 160,000+ customers worldwide.
Full Range of Materials & Specs
IPP stocks porcupine dryers across a wide range of specifications to match your process requirements.
How Buying a Used Porcupine Dryer Works
1
Submit Requirements
Share your specifications: capacity, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.
2
Receive Data Package
IPP sends a detailed equipment data sheet with specifications, dimensions, condition report, and photographs.
3
Inspect the Equipment
Contact IPP to arrange an on-site visit or request a live video walkthrough at one of our global locations.
4
Refurbishment Options
IPP offers refurbishment services through its UGE division (700+ vessels, 2,700+ parts in stock). Contact IPP for details on additional services.
5
Packaging & Delivery
IPP coordinates packaging, crating, freight, and delivery to your plant site. Worldwide shipping from offices in 15 countries.
Industries That Buy Used Porcupine Dryers
Pharmaceutical
Chemical Processing
Food & Beverage
Biotechnology
Agrochemicals
Fine Chemicals
Mining & Minerals
Cosmetics
Paints & Coatings
Petrochemicals
Frequently Asked Questions About Buying Used Porcupine Dryers
IPP stocks porcupine dryers from Gale Process Solutions and other manufacturers. Available in Stainless Steel 316, Stainless Steel 304 construction. Browse the IMS inventory for current availability.
IPP stocks porcupine dryers in multiple conditions: Used, Unused. Browse the current inventory for available condition options.
Yes. IPP stocks new porcupine dryers through its Gale Process Solutions (GPS) subsidiary, which supplies custom-built equipment with 12–16 week average delivery. Contact IPP for details on new inventory.
IPP stocks porcupine dryers in Stainless Steel 316, Stainless Steel 304 construction. Contact IPP to discuss material requirements for your application.
IPP stocks porcupine dryers from Gale Process Solutions and other manufacturers. Browse the current inventory to see available manufacturers.
Buying used porcupine dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on manufacturer, capacity, material of construction, and condition. Contact IPP for pricing on specific units.
In-stock porcupine dryers are ready to ship. IPP's GPS subsidiary supplies new custom-built equipment with 12–16 week average delivery. IPP ships from offices in 15 countries worldwide.
IPP coordinates packaging, crating, freight, and delivery to your plant site. With offices in 15 countries and 160,000+ customers served worldwide, IPP has extensive experience in global equipment logistics.
EN 
ES 
FR 
PL 
DE 
AR 
UR 
HI 
NL 
TR 
IT 
UK 
RU 
JA 
PT 
ZH