Buy Used Rising/Falling Film Evaporators for Sale

Buying used rising and falling film evaporators through International Process Plants gives chemical, pharmaceutical, food, and environmental processors access to thin-film tubular evaporators that move liquid up or down heated tubes for high-efficiency evaporation with short residence time from Kleiser Gmbh, Buflovak/Blaw Knox, Pitton-Gessner/Germany, APV, Betchel, and other OEM manufacturers. ▶

Materials of construction include Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321, and Titanium. Evaporation rates range from 12 kg/h (26.5 lb/h) on IPP# 220572 to 36,300 kg/h (80,000 lb/h) on IPP# 225370. Heat transfer surface areas span from 3.8 m² (40.6 ft²) to 1,450 m² (15,850 ft²).

Multi-effect configurations include two-effect systems from Buflovak/Blaw Knox and Swenson. Most units are rated for vacuum service. Available in used condition. Buying used rising and falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Evaporators in Stock

1980

Opgericht sinds

15

Landen met vestigingen

PMS Titanium — 36,300 kg/h

IPP# 225370 · Used

Buflovak/Blaw Knox SS 316 — 2-Effect

IPP# 246737 · Used

Kleiser Gmbh SS 316 — 9,400 kg/h

IPP# 706886 · Used

Buy Used Rising/Falling Film Evaporators by Material

IPP stocks rising/falling film evaporators across multiple material options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Rising/Falling Film Evaporators for Sale

IPP stocks stainless steel rising and falling film evaporators in multiple grades including Stainless Steel 316, Austenitic, 304, and 321. Available from Kleiser Gmbh, Pitton-Gessner/Germany, APV, Buflovak/Blaw Knox, and other manufacturers.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area.

Verdampingssnelheid:6,750 kg/h (14,900 lb/h)

Totale warmteoverdrachtsoppervlakte:262.6 m² (2,850 ft²) surface area

Druk:8.3 bar (120 psi)

Temperatuur:148.9 °C (300 °F)

Number of Effects:2-effect, vacuum rated

Voorwaarde:Gebruikte staat

Swenson SS 316 — 7,250 kg/h

Used Swenson Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 294 m² (3,150 ft²) heat transfer surface area.

Verdampingssnelheid:7,250 kg/h (16,000 lb/h)

Totale warmteoverdrachtsoppervlakte:294 m² (3,150 ft²) surface area

Druk:0,97 bar (14 psi)

Temperatuur:176.7 °C (350 °F)

Number of Effects:2-effect, vacuum rated

Voorwaarde:Gebruikte staat

Wiegand SS Austenitic — 14,000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Verdampingssnelheid:14,000 kg/h (30,850 lb/h)

Totale warmteoverdrachtsoppervlakte:696 m² (7,500 ft²) surface area

Materiaal:Roestvrij staal austenitisch

Vacuüm:Vacuum rated, vertical

Voorwaarde:Gebruikte staat

Buy Used Other Rising/Falling Film Evaporators for Sale

IPP stocks rising and falling film evaporators in carbon steel and graphite construction for corrosive-duty applications. Available from GESSNER and other manufacturers.

GESSNER Carbon Steel — 6.4 m²

Used GESSNER carbon steel rising/falling film evaporator with 6.4 m² (69 ft²) heat transfer surface area and SS 321 tubes.

Materiaal:Carbon Steel shell

Totale warmteoverdrachtsoppervlakte:6.4 m² (69 ft²) surface area

Tube Material:SS 321 tubes, vacuum rated

Voorwaarde:Gebruikte staat

Graphite — 7,400 kg/h

Used graphite rising/falling film evaporator with 7,400 kg/h (16,350 lb/h) evaporation rate, titanium centrifugal pumps, and fiberglass vapor bodies.

Materiaal:Graphite construction

Verdampingssnelheid:7,400 kg/h (16,350 lb/h)

Pump Details:Titanium centrifugal pumps

Voorwaarde:Gebruikte staat

Buy Used Titanium Rising/Falling Film Evaporators for Sale

IPP stocks titanium rising and falling film evaporators suited for highly corrosive feed streams where stainless steel cannot maintain tube integrity. Available from Plant Maintenance Services Corp. (PMS) and Betchel.

PMS Titanium — 36,300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Verdampingssnelheid:36,300 kg/h (80,000 lb/h)

Totale warmteoverdrachtsoppervlakte:1,450 m² (15,850 ft²) surface area

Materiaal:Titanium tubes

Tube Material:Inconel tubesheets

Druk:1.38 bar (20 psi), vacuum rated

Voorwaarde:Gebruikte staat

Betchel 130T Titanium — 18,150 kg/h

Used Betchel 130T titanium rising/falling film evaporator with 18,150 kg/h (40,000 lb/h) evaporation rate, mechanical vapor recompression (MVR), and titanium tubes with titanium tubesheets.

Verdampingssnelheid:18,150 kg/h (40,000 lb/h)

Tube Material:Titanium

Tubesheet Material:Titanium

MVR:Mechanical vapor recompression

Fabrikant:Betchel 130T

Model:skirt-mounted

Voorwaarde:Gebruikte staat

Buy Used Rising/Falling Film Evaporators for Sale by Manufacturer

IPP stocks rising and falling film evaporators from a wide range of manufacturers, with Kleiser Gmbh and Buflovak/Blaw Knox representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Kleiser Gmbh Rising/Falling Film Evaporators for Sale

Kleiser Gmbh is the deepest single-manufacturer position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel Austenitic construction across used conditions.

Kleiser Gmbh SS 316 — 9,400 kg/h

Used Kleiser Gmbh Stainless Steel 316 rising/falling film evaporator with 9,400 kg/h (20,700 lb/h) evaporation rate, vacuum rated, with controls included.

Verdampingssnelheid:9.400 kg/u (20.700 lb/u)

Materiaal:Roestvrij staal 316

Druk:6 bar (87 psi), 200 °C (392 °F)

Vacuüm:Vacuümgeschikt

Bedieningselementen:controls included

Voorwaarde:Gebruikte staat

Kleiser Gmbh SS Austenitic — 6,700 kg/h

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 6,700 kg/h (14,750 lb/h) evaporation rate, vertical orientation, vacuum rated.

Verdampingssnelheid:6,700 kg/h (14,750 lb/h)

Materiaal:Roestvrij staal austenitisch

Druk:6 bar (87 psi), 200 °C (392 °F)

Tube Material:SS 316 tubes and tubesheets

Voorwaarde:Gebruikte staat

Kleiser Gmbh SS Austenitic — 66.5 m²

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 66.5 m² (716 ft²) heat transfer surface area and 12 kg/h (26.5 lb/h) evaporation rate.

Totale warmteoverdrachtsoppervlakte:66.5 m² (716 ft²) surface area

Verdampingssnelheid:12 kg/h (26.5 lb/h)

Druk:6 bar (87 psi), 200 °C (392 °F)

Vacuüm:Vacuümgeschikt

Voorwaarde:Gebruikte staat

Buy Used Buflovak/Blaw Knox Rising/Falling Film Evaporators for Sale

Buflovak/Blaw Knox is the second deepest OEM position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel 304 construction with multi-effect configurations.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area in a 2-effect configuration.

Verdampingssnelheid:6,750 kg/h (14,900 lb/h)

Totale warmteoverdrachtsoppervlakte:262.6 m² (2,850 ft²) surface area

Druk:8.3 bar (120 psi)

Temperatuur:148.9 °C (300 °F)

Number of Effects:2-effect, vacuum rated

Voorwaarde:Gebruikte staat

Buflovak/Blaw Knox SS 304 — 9,550 kg/h

Used Buflovak/Blaw Knox Stainless Steel 304 rising/falling film evaporator with 9,550 kg/h (21,100 lb/h) evaporation rate and 392.1 m² (4,200 ft²) heat transfer surface area in a 2-effect configuration.

Verdampingssnelheid:9,550 kg/h (21,100 lb/h)

Totale warmteoverdrachtsoppervlakte:392.1 m² (4,200 ft²) surface area

Druk:0,97 bar (14 psi)

Temperatuur:148.9 °C (300 °F)

Number of Effects:2-effect with controls

Bedieningselementen:vacuum rated

Voorwaarde:Gebruikte staat

Buflovak/Blaw Knox SS 316 — 7,250 kg/h

Used Buflovak/Blaw Knox Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 83.6 m² (900 ft²) heat transfer surface area.

Verdampingssnelheid:7,250 kg/h (16,000 lb/h)

Totale warmteoverdrachtsoppervlakte:83.6 m² (900 ft²) surface area

Druk:3,4 bar (50 psi)

Temperatuur:148.9 °C (300 °F)

Materiaal:Roestvrij staal 316

Voorwaarde:Gebruikte staat

Buy Used Rising/Falling Film Evaporators from Other Manufacturers

Beyond Kleiser Gmbh and Buflovak/Blaw Knox, IPP stocks rising and falling film evaporators from Pitton-Gessner/Germany, APV, Betchel, Wiegand, DeSmet, Swenson, Paget Equipment, and other manufacturers. These units span laboratory-scale through large industrial-capacity duties.

APV Mitchell SS 316 — 7,600 kg/h

Used APV Mitchell Stainless Steel 316 rising/falling film evaporator with 7,600 kg/h (16,800 lb/h) evaporation rate and 24.9 m² (268 ft²) heat transfer surface area.

Verdampingssnelheid:7,600 kg/h (16,800 lb/h)

Totale warmteoverdrachtsoppervlakte:24.9 m² (268 ft²) surface area

Materiaal:Roestvrij staal 316

Vacuüm:Vacuümgeschikt

Voorwaarde:Gebruikte staat

Pitton-Gessner/Germany SS Austenitic — 49.8 m²

Used Pitton-Gessner/Germany model 1.4571/H2 Stainless Steel Austenitic rising/falling film evaporator with 49.8 m² (536 ft²) heat transfer surface area, vacuum rated.

Totale warmteoverdrachtsoppervlakte:49.8 m² (536 ft²) surface area

Materiaal:Roestvrij staal austenitisch

Druk:3 bar (43,5 psi)

Temperatuur:200 °C (392 °F)

Model:Model 1.4571/H2, vacuum rated

Voorwaarde:Gebruikte staat

DeSmet SS 316 — 1,350 kg/h

Used DeSmet Stainless Steel 316 rising/falling film evaporator with 1,350 kg/h (3,000 lb/h) evaporation rate and 18 m² (194 ft²) heat transfer surface area, vertical orientation.

Verdampingssnelheid:1,350 kg/h (3,000 lb/h)

Totale warmteoverdrachtsoppervlakte:18 m² (194 ft²) surface area

Druk:3 bar (43,5 psi)

Temperatuur:160 °C (320 °F)

Materiaal:Roestvrij staal 316

Voorwaarde:Gebruikte staat

Buy Used Rising/Falling Film Evaporators for Sale by Condition

IPP stocks rising and falling film evaporators in used condition. All units were previously installed in production service, inspected on intake, and are offered with traceable provenance at meaningful savings versus new OEM pricing.

Buy Used Rising/Falling Film Evaporators for Sale

Good used rising and falling film evaporators represent the full inventory position at IPP. These units were previously installed in production service, inspected on intake, and are offered as-is at meaningful savings while retaining OEM tube bundles, vapor bodies, and ancillary hardware.

Used PMS Titanium — 36,300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Voorwaarde:Gebruikte staat

Verdampingssnelheid:36,300 kg/h (80,000 lb/h)

Totale warmteoverdrachtsoppervlakte:1,450 m² (15,850 ft²) surface area

Materiaal:Titanium tubes, Inconel tubesheets

Vacuüm:Vacuum rated, vertical

Used Wiegand SS Austenitic — 14,000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Voorwaarde:Gebruikte staat

Verdampingssnelheid:14,000 kg/h (30,850 lb/h)

Totale warmteoverdrachtsoppervlakte:696 m² (7,500 ft²) surface area

Materiaal:Roestvrij staal austenitisch

Vacuüm:Vacuum rated, vertical

Used Paget Equipment SS 304 — 2,250 kg/h

Used Paget Equipment Stainless Steel 304 rising/falling film evaporator with 2,250 kg/h (5,000 lb/h) evaporation rate and 67.4 m² (725 ft²) heat transfer surface area.

Voorwaarde:Gebruikte staat

Verdampingssnelheid:2,250 kg/h (5,000 lb/h)

Totale warmteoverdrachtsoppervlakte:67.4 m² (725 ft²) surface area

Druk:10,3 bar (150 psi)

Temperatuur:232,2 °C (450 °F)

Vacuüm:Vacuum rated, vertical

Ready to Buy a Used Rising/Falling Film Evaporator?

Tell us your specifications and requirements. Our team will match your needs against current rising and falling film evaporator inventory and provide a detailed quote.

Buying Used Rising/Falling Film Evaporators vs Buying New

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new rising/falling film evaporators compare across key factors.

Factor	Afkomstig van IPP	Nieuw (OEM)
Apparatuurkosten	Aanzienlijke besparing ten opzichte van de nieuwprijs van de OEM.	Volledige OEM-adviesprijs
Leveringstermijn	Op voorraad zijnde artikelen klaar voor verzending.	Langere levertijden (nieuwbouw)
Materialen	Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321	Op maat gespecificeerd
Drukwaarden	0.97 bar (14 psi) to 10.3 bar (150 psi)	Op maat gemaakt volgens specificaties.
Fabrikanten	Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox and others	Eén OEM
milieu-impact	Verlengt de levensduur van apparatuur en vermindert afval.	Nieuw grondstoffenverbruik

Advantages of Buying Used Rising/Falling Film Evaporators from IPP

International Process Plants combineert meer dan 46 jaar expertise in procesapparatuur, bijna 150 medewerkers in 15 landen en een voorraad van 15.000 processystemen en belangrijke apparatuuronderdelen om reactoren te leveren die direct inzetbaar zijn voor uw proces.

Aanzienlijke kostenbesparingen

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Onmiddellijke beschikbaarheid

In-stock rising/falling film evaporators from IPP are ready to ship. IPP's GPS subsidiary also provides custom-built new equipment with 12–16 week average delivery.

Meerdere OEM-fabrikanten

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel and other manufacturers. Every unit is an original OEM product with traceable provenance.

Kwaliteit en renovatie

IPP biedt revisiediensten aan via haar UGE-divisie (Universal Glasteel Equipment), opgericht in 1995, die een voorraad heeft van meer dan 700 drukvaten en meer dan 2700 onderdelen.

Wereldwijde aanwezigheid in 15 landen

IPP heeft vestigingen in 15 landen: Brazilië, Canada, China, Tsjechië, Frankrijk, Duitsland, India, Italië, Mexico, Pakistan, Portugal, Roemenië, Turkije, het Verenigd Koninkrijk en de Verenigde Staten. IPP heeft wereldwijd meer dan 160.000 klanten bediend.

Volledig assortiment materialen en specificaties

IPP stocks rising/falling film evaporators across a wide range of specifications to match your process requirements.

How Buying a Used Rising/Falling Film Evaporator Works

The process of purchasing used rising/falling film evaporators from IPP follows five steps, from specification to delivery.

1

Vereisten indienen

Geef uw specificaties door: capaciteit, materiaal, drukclassificatie, temperatuur en toepassing. Of blader door onze doorzoekbare voorraad.

2

Ontvang datapakket

IPP stuurt een gedetailleerd specificatieblad met specificaties, afmetingen, een conditierapport en foto's van de apparatuur.

3

Inspecteer de apparatuur

Neem contact op met IPP om een bezoek op locatie te regelen of vraag een live videorondleiding aan met een IPP-specialist op een van onze locaties wereldwijd.

4

Renovatieopties

IPP biedt revisiediensten aan via haar UGE-divisie (meer dan 700 schepen, meer dan 2700 onderdelen op voorraad). Neem contact op met IPP voor meer informatie over aanvullende diensten.

5

Verpakking en levering

IPP coördineert de verpakking, het inpakken in kratten, het transport en de levering naar uw fabriekslocatie. Wereldwijde verzending vanuit vestigingen in 15 landen.

Industries That Buy Used Rising/Falling Film Evaporators

IPP supplies used rising/falling film evaporators to manufacturers across multiple process industries worldwide.

Chemische verwerking

Farmaceutisch

Eten en drinken

Zuivel

Petrochemicaliën

Milieu

Biotechnologie

Pulp & Papier

Verf en coatings

Petrochemicaliën

Frequently Asked Questions About Buying Used Rising/Falling Film Evaporators

Answers to the most common questions from procurement and operations teams evaluating used rising and falling film evaporators.

How many rising/falling film evaporators does IPP have in stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Verkrijgbaar in roestvrij staal 316, roestvrij staal 304, austenitisch roestvrij staal en roestvrij staal 321. Bekijk de IMS-voorraad voor de actuele beschikbaarheid.

What condition grades are available for used rising/falling film evaporators?

IPP stocks rising/falling film evaporators in multiple conditions: Used. Bekijk de actuele voorraad voor de beschikbare condities.

Does IPP sell new rising/falling film evaporators as well as used?

Ja. IPP stocks new rising/falling film evaporators through its Gale Process Solutions (GPS) subsidiary, which provides custom-built equipment with 12–16 week average delivery. Neem contact op met IPP voor meer informatie over nieuwe voorraad.

Welke bouwmaterialen zijn beschikbaar?

IPP stocks rising/falling film evaporators in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Neem contact op met IPP om de materiaaleisen voor uw toepassing te bespreken.

What manufacturers of rising/falling film evaporators does IPP stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Bekijk de actuele voorraad om te zien welke fabrikanten beschikbaar zijn.

How much can I save buying used rising/falling film evaporators versus new?

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. De exacte besparing is afhankelijk van de fabrikant, capaciteit, het gebruikte materiaal en de staat van het apparaat. Neem contact op met IPP voor prijsinformatie over specifieke apparaten.

How long does it take to receive rising/falling film evaporators from IPP?

In-stock rising/falling film evaporators are ready to ship. De GPS-dochteronderneming van IPP levert nieuwe, op maat gemaakte apparatuur met een gemiddelde levertijd van 12 tot 16 weken. IPP verzendt vanuit vestigingen in 15 landen wereldwijd.

Verzorgt IPP de verzending en het transport?

IPP coördineert het verpakken, inpakken, transport en de levering naar uw fabriekslocatie. Met vestigingen in 15 landen. En Wereldwijd meer dan 160.000 klanten bediend., IPP heeft ruime ervaring in de wereldwijde logistiek van apparatuur.

Overige onderdelen en apparatuur van IPP

In addition to rising/falling film evaporators, IPP stocks equipment across multiple categories for complete process solutions.

Warmtewisselaars

Reactoren

Tanks

Looking for New Rising/Falling Film Evaporators?

IPP Group levert nieuwe apparatuur via haar dochteronderneming Gale Process Solutions (GPS), die op maat gemaakte apparatuur levert met een gemiddelde levertijd van 12-16 weken. IPP biedt ook gereviseerde apparatuur aan via haar divisie UGE (Universal Glasteel Equipment).

Ready to Buy Rising/Falling Film Evaporators?

IPP levert al sinds 1980 hoogwaardige procesapparatuur wereldwijd en heeft meer dan 160.000 klanten. Vertel ons wat u nodig heeft en ons team zal u een passende voorraad en prijsopgave sturen.