Buy Used Pulverizers for Sale

Buying used pulverizers through International Process Plants gives chemical, pharmaceutical, food, mineral, plastics, and recycling manufacturers access to 101 pulverizers across 4 size-reduction technologies—granulator/disintegrator, jet, hammer, and comminutor pulverizers—ranging from 1 kW (1.34 HP) bench-scale granulators to 223.7 kW (300 HP) heavy-duty units—from Mikro, Alpine (Hosokawa), Frewitt, Nederman MikroPul, Fitzpatrick, Condux, Williams, Rietz, and other OEMs. ▶

Materials of construction include stainless steel 304, 316, 316L, 321, austenitic grades, and carbon steel. IPP stocks pulverizers from leading manufacturers such as Mikro Pulverizer, Fitzpatrick, and Hosokawa. Condition options include good used and unused surplus units.

Used pulverizer equipment from IPP encompasses a wide range of machinery essential for material size reduction. Whether you require hammer mills, jet mills, or fluid energy mills, IPP offers equipment that meets your specific needs. Buying used pulverizers from IPP can save up to 50% of capital and 90% of lead time versus buying new ▲

100+

Pulverizers In Stock

1-224

kW Motor Power Range

25+

OEM-fabrikant

Granulator/Disintegrator

Straalverpulveraars

Hamervergruizers

Nederman MikroPul

Featured: SS 316 granulator/disintegrator

Buy Used Pulverizers for Sale by Subtype

IPP stocks 101 pulverizers across 4 size-reduction technologies. Browse representative units from each pulverizer subtype below, then visit our IMS inventory page for the full list of in-stock units.

Granulator & Disintegrator Pulverizers for Sale

Granulator and disintegrator pulverizers are the largest subtype in IPP’s inventory with 55 units in stock. These machines reduce solids to controlled particle sizes for pharmaceutical granulation, chemical compounding, and food milling applications.

Alpine (Hosokawa) Multiplex 315 UPZ SS 304

Used Alpine (Hosokawa) Multiplex 315 UPZ stainless steel 304 granulator/disintegrator pulverizer. 11 m3 (388.5 ft3) capacity with 22 kW (29.5 HP) motor and belt-driven horizontal operation.

Materiaal:Roestvrij staal 304

Capaciteit:11 m3 (388.5 ft3)

Motorvermogen:22 kW (29,5 pk)

Inlet Diameter:150 mm (5.9 in)

Druk:0.05 bar (0.73 psi)

Temperatuur:60°C (140°F)

Oriëntatie:Horizontal, belt drive

Alpine (Hosokawa) 710-CW SS 321

Used Alpine (Hosokawa) 710-CW stainless steel 321 granulator/disintegrator pulverizer. 48 kW (64.4 HP) motor, horizontal orientation, belt drive, baseplate mounted.

Materiaal:Roestvrij staal 321

Motorvermogen:48 kW (64.4 HP)

Lengte:4,700 mm (184.4 in)

Breedte:2,200 mm (86.2 in)

Hoogte:1900 mm (74 inch)

Temperatuur:60°C (140°F)

Frewitt SG Granulator SS 321

Used Frewitt SG stainless steel 321 granulator/disintegrator pulverizer. 47.8 m3 (1,700 ft3) capacity with 4 kW (5.4 HP) motor and 120 mm (4.7 in) screen.

Materiaal:Roestvrij staal 321

Capaciteit:47.8 m3 (1,700 ft3)

Motorvermogen:4 kW (5.4 HP)

Druk:0.21 bar (3 psi)

Temperatuur:61.7°C (143°F)

Screen Size:120 mm (4.7 in)

Jet Pulverizers for Sale

Jet pulverizers are the second-largest subtype with 24 units in stock. Jet mills use high-velocity compressed gas to drive particle-on-particle impact for ultra-fine size reduction without mechanical contact, ideal for heat-sensitive materials and contamination-sensitive duties.

Mikro 6MA Jet Pulverizer SS Other

Used Mikro 6MA stainless steel other jet pulverizer. 22.4 kW (30 HP) motor at 6,000 RPM with 76.2 mm (3 in) outlet and atomizer/motor mounted on carbon steel base.

Materiaal:Roestvrij staal Overig

Motorvermogen:22,4 kW (30 pk)

Snelheid:6,000 RPM

Inlet Diameter:139.7 mm (5.5 in)

Outlet Diameter:76,2 mm (3 inch)

Footprint:1,450 x 1,100 x 1,000 mm (57 x 43 x 40 in)

Motor:TEFC, 460 V / 60 Hz

Mikro 8 MA Jet Pulverizer SS Other

Used Mikro 8 MA stainless steel other jet pulverizer. 90 kW (120.7 HP) ABB motor at 8,000 RPM, vertical orientation with clarifier.

Materiaal:Roestvrij staal Overig

Motorvermogen:90 kW (120.7 HP)

Snelheid:8,000 RPM

Clarifier:Ja

Oriëntatie:Verticaal

Motor Make:ABB M2KA 280SMB, 500 V / 50 Hz

Aljet Roto Mill 30 RJ SS 304

Used Aljet Roto Mill 30 RJ stainless steel 304 jet pulverizer. 22.4 kW (30 HP), 3,500 RPM, 10.3 bar (150 psi) and 3,900 m3/h (2,300 CFM) air flow with Acrison screw feeder.

Materiaal:Roestvrij staal 304

Motorvermogen:22,4 kW (30 pk)

Druk:10,3 bar (150 psi)

Luchtstroom:3,900 m3/h (2,300 CFM)

Feed Type:Acrison FHM01206 screw feed

Options:Clarifier and controls included

Hammer Pulverizers for Sale

Hammer pulverizers are the third subtype with 18 units in stock. Hammer mills use rotating swing or fixed hammers and an internal screen to impact-grind feed material, offering high throughput at coarser particle sizes for chemical, mineral, recycling, and food applications.

Williams 40GA Hammer Pulverizer Carbon Steel

Used Williams 40GA carbon steel hammer pulverizer. 111.9 kW (150 HP) motor, 1,200 RPM, 12 hammers, skid-mounted system with heater.

Materiaal:Koolstofstaal

Motorvermogen:111,9 kW (150 pk)

Snelheid:1,200 RPM

Hammers:12

Inlet Diameter:381 mm (15 in)

Outlet Diameter:482.6 mm (19 in)

Configuration:Skid-mounted with heater

Fitzpatrick D6 Hammer Pulverizer SS 316

Used Fitzpatrick D6 stainless steel 316 hammer pulverizer. 11.2 kW (15 HP) motor, 16 knives, 304.8 mm (12 in) inlet, mounted on 48 in legs.

Materiaal:Roestvrij staal 316

Motorvermogen:11,2 kW (15 pk)

Knives:16

Inlet Diameter:304.8 mm (12 in)

Inlet Height:304.8 mm (12 in)

Drijfveer:Belt, horizontal

Pulva Corp B Hammer Mill Carbon Steel

Used Pulva Corp B hammer mill carbon steel pulverizer. 11.2 kW (15 HP) U.S. Motors at 6,900 RPM with 2 swing hammers across 12 rows, vertical CS stand.

Materiaal:Koolstofstaal

Motorvermogen:11,2 kW (15 pk)

Snelheid:6,900 RPM

Hammers:2 hammers x 12 rows

Swing Hammers:Ja

Capaciteit:0.03 m3 (1 ft3)

Comminutor Pulverizers for Sale

Comminutor pulverizers are a specialty subtype with 2 units in stock. Comminutors are screen-based size-reduction units used for pharmaceutical granulation, sanitary processing, and applications where consistent particle size and easy cleanability are required.

Fitzpatrick Comminutor SS 304

Used Fitzpatrick Comminutor stainless steel 304 pulverizer. 7.5 kW (10 HP) Sterling motor with belt drive and 6.4 mm (0.25 in) screen.

Materiaal:Roestvrij staal 304

Motorvermogen:7,5 kW (10 pk)

Motor Make:Sterling B0104YFF2A0

Motor Frame:215T

Screen Size:6.4 mm (0.25 in)

Drijfveer:Belt

Fitzmill Comminutor Pulverizer SS Other

Used Fitzmill stainless steel other comminutor pulverizer. 7.5 kW (10 HP) motor, vertical orientation, portable on cart with casters.

Materiaal:Roestvrij staal Overig

Motorvermogen:7,5 kW (10 pk)

Inlet Diameter:304.8 mm (12 in)

Outlet Diameter:406,4 mm (16 inch)

Portable:Yes, mounted on cart

Footprint:1,200 x 1,150 x 1,900 mm (48 x 45 x 75 in)

Buy Used Pulverizers for Sale by Manufacturer

IPP stocks pulverizers from 25+ manufacturers, with Mikro, Alpine (Hosokawa), and Frewitt representing the deepest positions in inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, spare parts, and operator familiarity.

Buy Used Mikro Pulverizers for Sale

Mikro is the deepest single-manufacturer position in IPP’s pulverizer inventory with 17 units. Available Mikro models include the 6MA jet mill series, 8 MA jet mill, and 2DH granulator/disintegrator.

Mikro 6MA Jet Pulverizer SS Other

Used Mikro 6MA stainless steel other jet pulverizer. 22.4 kW (30 HP) at 6,000 RPM with TEFC motor, atomizer mounted on carbon steel base.

Materiaal:Roestvrij staal Overig

Motorvermogen:22,4 kW (30 pk)

Model:6MA

Snelheid:6,000 RPM

Mikro 8 MA Jet Pulverizer SS Other — 90 kW (120.7 HP)

Used Mikro 8 MA stainless steel other jet pulverizer. 90 kW (120.7 HP) ABB motor at 8,000 RPM, vertical with clarifier.

Materiaal:Roestvrij staal Overig

Motorvermogen:90 kW (120.7 HP)

Model:8 MA

Clarifier:Ja

Mikro 6MA Jet Pulverizer SS Other (Unit 2)

Used Mikro 6MA stainless steel other jet pulverizer. 22.4 kW (30 HP), 6,000 RPM, identical configuration to 212527.

Materiaal:Roestvrij staal Overig

Motorvermogen:22,4 kW (30 pk)

Model:6MA

Footprint:1,450 x 1,100 x 1,000 mm (57 x 43 x 40 in)

Buy Used Alpine (Hosokawa) Pulverizers for Sale

Alpine (Hosokawa) is the second-deepest manufacturer position with 16 units across granulator, jet, and impact mill subtypes. Models in stock include Multiplex 315 UPZ, 710-CW, 630-C, UPZ 315, and 800 AFG-1.

Alpine (Hosokawa) Multiplex 315 UPZ SS 304

Used Alpine (Hosokawa) Multiplex 315 UPZ stainless steel 304 granulator pulverizer. 11 m3 (388.5 ft3) capacity, 22 kW (29.5 HP), horizontal with belt drive.

Materiaal:Roestvrij staal 304

Model:Multiplex 315 UPZ

Capaciteit:11 m3 (388.5 ft3)

Motorvermogen:22 kW (29,5 pk)

Alpine (Hosokawa) 710-CW SS 321

Used Alpine (Hosokawa) 710-CW stainless steel 321 granulator pulverizer. 48 kW (64.4 HP), 4,700 x 2,200 x 1,900 mm (184.4 x 86.2 x 74 in) baseplate-mounted.

Materiaal:Roestvrij staal 321

Model:710-CW

Motorvermogen:48 kW (64.4 HP)

Lengte:4,700 mm (184.4 in)

Alpine (Hosokawa) 800 AFG-1 Jet Carbon Steel

Used Alpine (Hosokawa) 800 AFG-1 carbon steel jet pulverizer. 16 kW (21.5 HP), 1,250 m3 (44,150 ft3) capacity, 5,200 m3/h (3,050 CFM) air flow, vertical with clarifier.

Materiaal:Koolstofstaal

Model:800 AFG-1

Motorvermogen:16 kW (21.5 HP)

Luchtstroom:5,200 m3/h (3,050 CFM)

Buy Used Frewitt Pulverizers for Sale

Frewitt is the third-deepest manufacturer position with 9 units in stock. Frewitt models in stock include MGE, SG, MGF-620, GBM-246, MGHK-5, Conwitt 250, Hammerwitt mill 6, and BMI-242-2.

Frewitt SG Granulator SS 321

Used Frewitt SG stainless steel 321 granulator/disintegrator pulverizer. 47.8 m3 (1,700 ft3) capacity, 4 kW (5.4 HP), 120 mm (4.7 in) screen.

Materiaal:Roestvrij staal 321

Model:SG

Capaciteit:47.8 m3 (1,700 ft3)

Screen Size:120 mm (4.7 in)

Frewitt Hammerwitt 6 Polished SS 316

Used Frewitt Hammerwitt mill 6 highly polished stainless steel 316 hammer pulverizer. 4 kW (5.4 HP), 24 hammers, 0.25 mm (0.01 in) screen, direct-coupled drive.

Materiaal:Stainless Steel 316 (polished)

Model:Hammerwitt mill 6

Motorvermogen:4 kW (5.4 HP)

Hammers:24

Screen Size:0.25 mm (0.01 in)

Frewitt MGF-620 Granulator SS 304

Used Frewitt MGF-620 stainless steel 304 granulator/disintegrator pulverizer. 1 kW (1.34 HP) Brown Boveri motor at 350 RPM, horizontal belt drive.

Materiaal:Roestvrij staal 304

Model:MGF-620

Motorvermogen:1 kW (1.34 HP)

Snelheid:350 RPM

Buy Used Nederman MikroPul Pulverizers for Sale

Nederman MikroPul has 7 units in IPP’s pulverizer inventory. Models in stock include 2DH granulator, 3TH hammer, and 5MA / 6MA jet mills.

Nederman MikroPul 2DH Granulator SS 316

Used Nederman MikroPul 2DH stainless steel 316 granulator/disintegrator pulverizer. 11.2 kW (15 HP) Baldor RGZZ motor, horizontal orientation, base mounted.

Materiaal:Roestvrij staal 316

Model:2DH

Motorvermogen:11,2 kW (15 pk)

Motor:Baldor RGZZ, 230/460 V / 60 Hz

Footprint:1,200 x 1,200 x 1,050 mm (48 x 48 x 42 in)

Nederman MikroPul 5MA Jet SS 304

Used Nederman MikroPul 5MA stainless steel 304 jet pulverizer. 3.7 kW (5 HP) motor with gravity feed and single screw feeder belt drive, horizontal orientation on wheeled stand.

Materiaal:Roestvrij staal 304

Model:5MA

Motorvermogen:3,7 kW (5 pk)

Feed Type:Gravity + screw feeder

Buy Used Condux & Fitzpatrick Pulverizers for Sale

Condux and Fitzpatrick each represent 5 units in IPP’s pulverizer inventory. IPP stocks pulverizers from leading manufacturers such as Mikro Pulverizer, Fitzpatrick, and Hosokawa, ensuring quality and reliability.

Condux CUM 280/S-D Granulator SS 316

Used Condux CUM 280/S-D stainless steel 316 granulator pulverizer. 11 kW (14.8 HP), 2,995 RPM, 100 mm (3.9 in) inlet, horizontal orientation.

Materiaal:Roestvrij staal 316

Model:CUM 280/S-D

Motorvermogen:11 kW (14,8 pk)

Snelheid:2,995 RPM

Inlet Diameter:100 mm (3.9 in)

Condux CUM 150/S-D-WG Universal Impact Mill SS 316L

Used Condux CUM 150/S-D-WG Universal impact mill stainless steel 316L pulverizer. 5.5 kW (7.4 HP) motor at 16,000 RPM with belt drive, mounted on stainless steel table.

Materiaal:Roestvrij staal 316L

Model:CUM 150/S-D-WG

Motorvermogen:5,5 kW (7,4 pk)

Snelheid:16,000 RPM

Screen:Ja

Fitzpatrick D6 Hammer SS 316

Used Fitzpatrick D6 stainless steel 316 hammer pulverizer. 11.2 kW (15 HP), 16 knives, 304.8 mm (12 in) inlet, horizontal belt drive.

Materiaal:Roestvrij staal 316

Model:D6

Motorvermogen:11,2 kW (15 pk)

Knives:16

Buy Used Pulverizers for Sale by Condition

IPP stocks pulverizers in used and unused surplus condition grades. Choose the condition that matches your budget, timeline, and performance requirements.

Buy Used Pulverizers for Sale

Good used pulverizers make up the deepest condition position in IPP’s pulverizer inventory at 96 of 101 units. These pulverizers were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining OEM construction and components.

Used Alpine (Hosokawa) 710-CW Granulator/Disintegrator SS 321

Used Alpine (Hosokawa) 710-CW stainless steel 321 granulator/disintegrator pulverizer with 90 kW (120.7 HP) motor power.

Voorwaarde:Gebruikte staat

Materiaal:Roestvrij staal 321

Model:710-CW

Used Mikro 6MA Jet Pulverizer SS Other

Used Mikro 6MA stainless steel jet pulverizer for fine and ultra-fine size reduction using compressed gas streams.

Voorwaarde:Gebruikte staat

Materiaal:Roestvrij staal Overig

Model:6MA

Used Williams 40GA Hammer Pulverizer Carbon Steel

Used Williams 40GA carbon steel hammer pulverizer with 111.9 kW (150 HP) motor for high-throughput mineral and chemical size reduction.

Voorwaarde:Gebruikte staat

Materiaal:Koolstofstaal

Motorvermogen:111,9 kW (150 pk)

Buy Unused Surplus Pulverizers for Sale

Unused surplus pulverizers were manufactured but never installed in a process. IPP stocks 5 unused pulverizers from Rietz, GEA, and Mach Anlagebau Nossen. These units offer new-equipment performance with immediate availability at a meaningful discount compared to factory-new orders.

Unused Rietz RD-18-P32 Granulator/Disintegrator Carbon Steel

Unused Rietz RD-18-P32 carbon steel granulator/disintegrator pulverizer with 74.6 kW (100 HP) Reliance Duty Master motor, direct coupled, vertical orientation.

Voorwaarde:In ongebruikte staat

Model:RD-18-P32

Motorvermogen:74.6 kW (100 HP)

Unused GEA Pharmadule PMA Advance 60 SS 316

Unused GEA Pharmadule PMA Advance 60 stainless steel 316 granulator/disintegrator pulverizer. 48 m3 (1,700 ft3) capacity with 4 kW (5.4 HP) motor and side-mounted choppers.

Voorwaarde:In ongebruikte staat

Materiaal:Roestvrij staal 316

Capaciteit:48 m3 (1,700 ft3)

Unused GEA Pharmodule PMA Advance 300 SS 316L

Unused GEA Pharmodule PMA Advance 300 stainless steel 316L granulator/disintegrator pulverizer. 300 m3 (10,600 ft3) capacity with 15 kW (20.1 HP) motor, jacketed, Clean-In-Place capable.

Voorwaarde:In ongebruikte staat

Materiaal:Roestvrij staal 316L

Capaciteit:300 m3 (10,600 ft3)

Comparing Used Pulverizer Types

Each pulverizer subtype targets different particle sizes, throughputs, and feed materials. Below is a comparison of the four pulverizer subtypes IPP stocks in current inventory.

Pulverizer Type	Size-Reduction Mechanism	Typical Fineness	Het beste voor
Granulator / Disintegrator (55 units)	Rotating knives, pins, or impact rotor	Coarse to medium granules	Pharmaceutical granulations, food, plastics, chemicals
Jet (24 units)	High-velocity compressed gas (air/steam) particle-on-particle impact	Ultra-fine, micronized (sub-micron to ~10 µm)	Heat-sensitive APIs, pigments, fine ceramics, contamination-sensitive feeds
Hammer (18 units)	Rotating hammers and screen-controlled impact grinding	Coarse to medium powders	Minerals, mining, recycling, chemicals, high-throughput duties
Comminutor (2 units)	Rotating impeller with screen for controlled particle sizing	Medium powders, controlled distribution	Pharmaceutical and chemical sizing, lump breaking

Need a Used Pulverizer? Ask an IPP Expert.

Tell us your feed material, target particle size, throughput, and material-of-construction requirements. Our team will match your specifications against pulverizers in current inventory and provide a detailed quote.

Advantages of Buying Used Pulverizers from IPP

International Process Plants combineert meer dan 46 jaar expertise in procesapparatuur, bijna 150 medewerkers in 15 landen en een voorraad van 15.000 processystemen en belangrijke apparatuuronderdelen om reactoren te leveren die direct inzetbaar zijn voor uw proces.

Aanzienlijke kostenbesparingen

Buying used pulverizers from IPP can save up to 50% of capital and 90% of lead time versus buying new. With 101 pulverizers across 4 subtypes in current inventory, IPP offers a broad selection to match your budget and process requirements.

Onmiddellijke beschikbaarheid

In-stock pulverizers from IPP are ready to ship. New OEM pulverizers require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

4 Pulverizer Subtypes in One Inventory

IPP stocks granulator/disintegrator, jet, hammer, and comminutor pulverizers. One supplier covers coarse-to-ultra-fine size reduction across pharma, chemical, food, mineral, and recycling duties.

Meerdere bouwmaterialen

Materials include stainless steel (SS 304, 316, 316L, 321, austenitic, and other grades), and carbon steel. Match the material to your process chemistry, sanitary requirements, and abrasion profile.

Wereldwijde aanwezigheid in 15 landen

IPP heeft vestigingen in 15 landen: Brazilië, Canada, China, Tsjechië, Frankrijk, Duitsland, India, Italië, Mexico, Pakistan, Portugal, Roemenië, Turkije, het Verenigd Koninkrijk en de Verenigde Staten. IPP heeft wereldwijd meer dan 160.000 klanten bediend.

Toonaangevende OEM-fabrikanten

IPP stocks pulverizers from Mikro, Alpine (Hosokawa), Frewitt, Nederman MikroPul, Condux, Fitzpatrick, Williams, Rietz, GEA, Pallman, Bühler, Alexanderwerk Pharma, British Rema, Quadro Engineering, Urschel, and additional OEMs. Every unit is an original OEM product with traceable provenance.

How Buying a Used Pulverizer Works

The process of purchasing a used pulverizer from IPP follows four steps, from specification to delivery.

1

Vereisten indienen

Share your pulverizer specifications: subtype (granulator, jet, hammer, comminutor), feed material, target particle size, throughput, motor power, and material of construction. Or browse our searchable pulverizer inventory.

2

Ontvang datapakket

IPP sends a detailed equipment data sheet with motor power, screen size, rotor speed, dimensions, material of construction, and condition report with photographs.

3

Inspecteer de apparatuur

Contact IPP to arrange an on-site visit or request a live video walkthrough of the pulverizer with an IPP team member at one of our global locations. IPP operates offices in 15 countries.

4

Verpakking en levering

IPP coordinates packaging, crating, freight, and delivery to your plant site. IPP's UGE division stocks 700+ vessels and 2,700+ parts for additional refurbishment and spares support.

Browse All Pulverizer Types

IPP stocks used pulverizers across 4 size-reduction technologies. Explore the full pulverizer inventory and related size-reduction equipment below.

All Pulverizers (IMS Inventory)

Searchable IMS inventory of all 101 pulverizers including granulator, jet, hammer, and comminutor subtypes.

Used Mills

Ball mills, hammer mills, colloid mills, and roller mills for fine-to-coarse size reduction across process industries.

Used Mixers

Ribbon, paddle, plough, and high-shear mixers for blending pulverized powders and granulations.

Used Dryers

Rotary vacuum, fluid bed, spray, freeze, and other dryers used upstream or downstream of pulverizers.

Industries That Buy Used Pulverizers

IPP supplies used pulverizers to manufacturers across multiple process industries worldwide. Pulverizers serve any operation that requires controlled particle-size reduction of dry feed materials.

Farmaceutisch

Food & Ingredients

Farmaceutisch

Mineralen en mijnbouw

Plastics & Polymers

Verf en coatings

Recycling

Fijne chemicaliën

Frequently Asked Questions About Buying Used Pulverizers

Answers to the most common questions from process teams and procurement teams evaluating used pulverizers.

What types of pulverizers does IPP stock?

IPP stocks 101 pulverizers across 4 subtypes: granulator/disintegrator pulverizers (55 units), jet pulverizers (24 units), hammer pulverizers (18 units), and comminutor pulverizers (2 units). Manufacturers include Mikro, Alpine (Hosokawa), Frewitt, Nederman MikroPul, Condux, Fitzpatrick, Williams, and Rietz. Browse the IMS pulverizer inventory for current availability, or contact IPP to discuss your specific size-reduction requirements.

What is the difference between a jet pulverizer and a hammer pulverizer?

Jet pulverizers use high-velocity compressed gas streams to drive particle-on-particle impact for ultra-fine size reduction without mechanical contact, which protects against contamination and is well suited to heat-sensitive materials. Hammer pulverizers use rotating hammers and a screen to impact-grind feed material; they offer higher throughput at coarser particle sizes and are often used in chemical, mineral, and recycling applications.

What materials of construction are available for used pulverizers?

IPP stocks pulverizers in stainless steel 304 (26 units), carbon steel (23 units), stainless steel other grades (21 units), stainless steel 316 (13 units), stainless steel 321 (9 units), stainless steel 316L (3 units), and austenitic stainless steel (2 units). Stainless steel is used for pharmaceutical, food, and sanitary applications, while carbon steel serves mineral, recycling, and general industrial size reduction.

How much can I save buying a used pulverizer versus new?

Buying used pulverizers from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on subtype, manufacturer, material of construction, motor power, and condition. Contact IPP for pricing on specific units from current pulverizer inventory.

What motor power range is available?

Motor power across IPP's pulverizer inventory ranges from 1 kW (1.34 HP) on a Frewitt MGF-620 laboratory granulator up to 223.7 kW (300 HP) on large mineral pulverizers. The most common power range is 7.5 to 22.4 kW (10 to 30 HP) for pharmaceutical, chemical, and food processing duties.

Does IPP handle shipping and freight for pulverizers?

IPP coördineert het verpakken, inpakken, transport en de levering naar uw fabriekslocatie. IPP heeft vestigingen in 15 landen: Brazilië, Canada, China, Tsjechië, Frankrijk, Duitsland, India, Italië, Mexico, Pakistan, Portugal, Roemenië, Turkije, het Verenigd Koninkrijk en de Verenigde Staten. IPP has served 160,000+ customers worldwide.

Looking for New Pulverizers?

IPP Group supplies new process equipment through its Gale Process Solutions (GPS) subsidiary, which provides custom fabricated equipment with 12–16 week average delivery. If you cannot find what you need in our used pulverizer inventory, we can build to your specifications.

Ready to Buy a Used Pulverizer?

IPP levert al sinds 1980 hoogwaardige procesapparatuur wereldwijd en heeft meer dan 160.000 klanten. Vertel ons wat u nodig heeft en ons team zal u een passende voorraad en prijsopgave sturen.

Pulverizer Type

Size-Reduction Mechanism

Typical Fineness

Het beste voor

Granulator / Disintegrator (55 units)

Rotating knives, pins, or impact rotor

Coarse to medium granules

Pharmaceutical granulations, food, plastics, chemicals

Jet (24 units)

High-velocity compressed gas (air/steam) particle-on-particle impact

Ultra-fine, micronized (sub-micron to ~10 µm)

Heat-sensitive APIs, pigments, fine ceramics, contamination-sensitive feeds

Hammer (18 units)

Rotating hammers and screen-controlled impact grinding

Coarse to medium powders

Minerals, mining, recycling, chemicals, high-throughput duties

Comminutor (2 units)

Rotating impeller with screen for controlled particle sizing

Medium powders, controlled distribution

Pharmaceutical and chemical sizing, lump breaking