Buy Used Holoflite & Screw Dryers for Sale

Buying used holoflite and screw dryers through International Process Plants gives chemical processing, wastewater treatment, mining, and pharmaceutical buyers access to indirect-heat dryers that use screws to convey and thermally process bulk solids in a single enclosed trough from Joy Denver, Svedala, Hi Line Industries, Reitz, Denver Equipment, Thies Kg Coesfeld Gmbh, and other OEM manufacturers. ▶

Materials of construction include Carbon Steel, Stainless Steel 316, Stainless Steel 304, and Stainless Steel 316L. Internal pressure ratings range from 0.005 bar (0.07 psi) on IPP# 208223 to 5.5 bar (80 psi) on IPP# 222018. Heat transfer surface areas span from 7.2 m² (78 ft²) on IPP# 91126 to 141.1 m² (1,500 ft²) on IPP# 232604. Screw configurations range from single-screw units through twin-screw and quad-screw designs.

IPP stocks Joy Denver units in the D-2420-6 and D12-20-5 model families. Svedala inventory includes the Q2424-6 quad-screw processor series. All units are in used condition. Buying used holoflite and screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

10+

Holoflite & Screw Dryers in Stock

1980

Opgericht sinds

15

Landen met vestigingen

Joy Denver D-2420-6 Carbon Steel

Used — 53 m² heat transfer area

Denver Equipment Stainless Steel 316L

Used — 19 m² heat transfer area

Svedala Q2424-6 Carbon Steel

Used — 141.1 m² heat transfer area

Buy Used Holoflite & Screw Dryers by Material

IPP stocks holoflite and screw dryers in carbon steel and multiple stainless steel grades. The material of construction determines corrosion resistance, maximum operating temperature, and compatibility with the product being dried.

Buy Used Carbon Steel Holoflite & Screw Dryers for Sale

Carbon steel is the deepest material position in IPP’s holoflite and screw dryer inventory. Available from Joy Denver and Svedala, these units suit general industrial drying where elevated corrosion resistance is not required.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:53 m² (571 ft²) heat transfer area

Interne druk:5.5 bar (80 psi)

Interne temperatuur:343,3 °C (650 °F)

Aantal schroeven:Four-screw configuration

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and hot-oil heating medium.

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:141.1 m² (1,500 ft²) heat transfer area

Interne druk:2.1 bar (30 psi)

Interne temperatuur:343,3 °C (650 °F)

Aantal schroeven:Four-screw configuration

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area.

Warmteoverdrachtsoppervlakte:11.9 m² (128 ft²) heat transfer area

Manteldruk:2.1 bar (30 psi)

Jastemperatuur:343,3 °C (650 °F)

Aantal schroeven:Single-screw configuration

Voorwaarde:Gebruikte staat

Buy Used Stainless Steel Holoflite & Screw Dryers for Sale

IPP stocks stainless steel holoflite and screw dryers in 316, 304, and 316L grades. Available from Denver Equipment, Thies Kg Coesfeld Gmbh, Hi Line Industries, and Reitz for corrosion-sensitive or sanitary drying applications.

Denver Equipment D-12-18-5 — 19 m²

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Materiaal:Roestvrij staal 316L

Warmteoverdrachtsoppervlakte:19 m² (204 ft²) heat transfer area

Interne druk:2.1 bar (30 psi)

Interne temperatuur:343,3 °C (650 °F)

Aantal schroeven:Twin-screw configuration

Product Rate:907 kg/h (2,000 lb/h) product rate

Thies Kg Coesfeld Gmbh 2 V 410-24 — SS 316

Used Thies Kg Coesfeld Gmbh 2 V 410-24 stainless steel 316 holoflite and screw dryer with twin-screw design rated for 50 °C (122 °F) internal temperature.

Materiaal:Roestvrij staal 316

Interne temperatuur:50 °C (122 °F) internal temperature

Manteldruk:6 bar (87 psi) jacket pressure

Aantal schroeven:Twin-screw configuration

Breedte:700 mm (27.6 in) W

Lengte:3,750 mm (147.6 in) L

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Materiaal:Roestvrij staal 304

Lengte:3,050 mm (120 in) length

Manteldruk:0.34 bar (5 psi) jacket pressure

Aantal schroeven:Single-screw configuration

Voorwaarde:Gebruikte staat

Buy Used Holoflite & Screw Dryers for Sale by Manufacturer

IPP stocks holoflite and screw dryers from six OEM manufacturers, with Joy Denver and Svedala representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Joy Denver Holoflite & Screw Dryers for Sale

Joy Denver is the deepest single-manufacturer position in IPP’s holoflite and screw dryer inventory. Available models include the D-2420-6 quad-screw processor and the D12-20-5 single-screw unit, all in carbon steel construction.

Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area, rated for 5.5 bar (80 psi) at 343.3 °C (650 °F).

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Aantal schroeven:Four-screw configuration

Voorwaarde:Gebruikte staat

Joy Denver D-2420-6 — IPP# 222019

Used Joy Denver D-2420-6 carbon steel holoflite and screw dryer with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:53 m² (571 ft²) heat transfer area

Interne druk:5.5 bar (80 psi)

Interne temperatuur:343,3 °C (650 °F)

Aantal schroeven:Four-screw configuration

Voorwaarde:Gebruikte staat

Joy Denver D12-20-5 — 11.9 m²

Used Joy Denver D12-20-5 single-screw holoflite dryer with 11.9 m² (128 ft²) heat transfer surface area and 2.1 bar (30 psi) jacket pressure.

Warmteoverdrachtsoppervlakte:11.9 m² (128 ft²) heat transfer area

Manteldruk:2.1 bar (30 psi)

Jastemperatuur:343,3 °C (650 °F)

Aantal schroeven:Single-screw configuration

Lengte:6,100 mm (240 in) length

Voorwaarde:Gebruikte staat

Buy Used Svedala Holoflite & Screw Dryers for Sale

Svedala is the second deepest OEM position in IPP’s holoflite and screw dryer inventory. Available units include the Q2424-6 quad-screw processor series in carbon steel construction with hot-oil heating medium.

Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Aantal schroeven:Four-screw configuration

Voorwaarde:Gebruikte staat

Svedala Q2424-6 — IPP# 232605

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:141.1 m² (1,500 ft²) heat transfer area

Interne druk:2.1 bar (30 psi)

Interne temperatuur:343,3 °C (650 °F)

Aantal schroeven:Four-screw configuration

Voorwaarde:Gebruikte staat

Svedala — 141.1 m² IPP# 232603

Used Svedala carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Aantal schroeven:Four-screw configuration

Voorwaarde:Gebruikte staat

Buy Used Holoflite & Screw Dryers from Other Manufacturers

Beyond Joy Denver and Svedala, IPP stocks holoflite and screw dryers from Hi Line Industries, Reitz, Denver Equipment, and Thies Kg Coesfeld Gmbh. These units span stainless steel grades for corrosion-sensitive and sanitary drying duties.

Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Materiaal:Roestvrij staal 316L

Warmteoverdrachtsoppervlakte:19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Aantal schroeven:Twin-screw configuration

Voorwaarde:Gebruikte staat

Hi Line Industries 2155M25 — SS 316

Used Hi Line Industries 2155M25 stainless steel 316 holoflite and screw dryer with single-screw configuration rated for 1.03 bar (14.9 psi) at 148.9 °C (300 °F).

Materiaal:Roestvrij staal 316

Interne druk:1.03 bar (14.9 psi)

Interne temperatuur:148.9 °C (300 °F)

Lengte:4,100 mm (162 in) length

Aantal schroeven:Single-screw configuration

Voorwaarde:Gebruikte staat

Reitz TJ-12-K3210 — SS 304

Used Reitz TJ-12-K3210 stainless steel 304 holoflite and screw dryer with single-screw configuration and 3,050 mm (120 in) length.

Materiaal:Roestvrij staal 304

Lengte:3,050 mm (120 in) length

Manteldruk:0.34 bar (5 psi) jacket pressure

Aantal schroeven:Single-screw configuration

Voorwaarde:Gebruikte staat

Buy Used Holoflite & Screw Dryers for Sale by Condition

All holoflite and screw dryers currently in IPP’s inventory are in used condition. Used units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining original OEM screw and drive hardware.

Buy Used Holoflite & Screw Dryers for Sale

All holoflite and screw dryers in IPP’s current inventory are in good used condition. These units were previously installed in production service and retain their original OEM hollow-flight screws, trough bodies, drive assemblies, and heating jackets.

Used Joy Denver D-2420-6 — 53 m²

Used Joy Denver D-2420-6 carbon steel quad-screw holoflite processor with 53 m² (571 ft²) heat transfer surface area and 6,800 kg/h (15,000 lb/h) product rate.

Voorwaarde:Gebruikte staat

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:53 m² (571 ft²) heat transfer area

Product Rate:6,800 kg/h (15,000 lb/h) product rate

Aantal schroeven:Four-screw configuration

Used Denver Equipment D-12-18-5 — SS 316L

Used Denver Equipment D-12-18-5 stainless steel 316L holoflite and screw dryer with 19 m² (204 ft²) heat transfer surface area and twin-screw configuration.

Voorwaarde:Gebruikte staat

Materiaal:Roestvrij staal 316L

Warmteoverdrachtsoppervlakte:19 m² (204 ft²) heat transfer area

Product Rate:907 kg/h (2,000 lb/h) product rate

Aantal schroeven:Twin-screw configuration

Used Svedala Q2424-6 — 141.1 m²

Used Svedala Q2424-6 carbon steel quad-screw holoflite processor with 141.1 m² (1,500 ft²) heat transfer surface area and 5,450 kg/h (12,000 lb/h) product rate.

Voorwaarde:Gebruikte staat

Materiaal:Koolstofstaal

Warmteoverdrachtsoppervlakte:141.1 m² (1,500 ft²) heat transfer area

Product Rate:5,450 kg/h (12,000 lb/h) product rate

Aantal schroeven:Four-screw configuration

Ready to Buy a Used Holoflite & Screw Dryer?

Tell us your specifications and requirements. Our team will match your needs against current holoflite and screw dryer inventory and provide a detailed quote.

Buying Used Holoflite & Screw Dryers vs Buying New

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new holoflite & screw dryers compare across key factors.

Factor	Afkomstig van IPP	Nieuw (OEM)
Apparatuurkosten	Aanzienlijke besparing ten opzichte van de nieuwprijs van de OEM.	Volledige OEM-adviesprijs
Leveringstermijn	Op voorraad zijnde artikelen klaar voor verzending.	Extended lead times (new manufacturing)
Materialen	Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L	Op maat gespecificeerd
Drukwaarden	0.005 bar (0.07 psi) to 5.5 bar (80 psi)	Op maat gemaakt volgens specificaties.
Fabrikanten	Joy Denver, Svedala, Hi Line Industries and others	Eén OEM
milieu-impact	Verlengt de levensduur van apparatuur en vermindert afval.	Nieuw grondstoffenverbruik

Advantages of Buying Used Holoflite & Screw Dryers from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver holoflite & screw dryers ready for your process.

Aanzienlijke kostenbesparingen

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Onmiddellijke beschikbaarheid

In-stock holoflite & screw dryers from IPP are ready to ship. IPP's GPS subsidiary also provides custom-manufactured new equipment with 12–16 week average delivery.

Meerdere OEM-fabrikanten

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz and other manufacturers. Every unit is an original OEM product with traceable provenance.

Kwaliteit en renovatie

IPP biedt revisiediensten aan via haar UGE-divisie (Universal Glasteel Equipment), opgericht in 1995, die een voorraad heeft van meer dan 700 drukvaten en meer dan 2700 onderdelen.

Wereldwijde aanwezigheid in 15 landen

IPP heeft vestigingen in 15 landen: Brazilië, Canada, China, Tsjechië, Frankrijk, Duitsland, India, Italië, Mexico, Pakistan, Portugal, Roemenië, Turkije, het Verenigd Koninkrijk en de Verenigde Staten. IPP heeft wereldwijd meer dan 160.000 klanten bediend.

Volledig assortiment materialen en specificaties

IPP stocks holoflite & screw dryers across a wide range of specifications to match your process requirements.

How Buying a Used Holoflite & Screw Dryer Works

The process of purchasing used holoflite & screw dryers from IPP follows five steps, from specification to delivery.

1

Vereisten indienen

Geef uw specificaties door: capaciteit, materiaal, drukclassificatie, temperatuur en toepassing. Of blader door onze doorzoekbare voorraad.

2

Ontvang datapakket

IPP stuurt een gedetailleerd specificatieblad met specificaties, afmetingen, een conditierapport en foto's van de apparatuur.

3

Inspecteer de apparatuur

Neem contact op met IPP om een bezoek op locatie te regelen of vraag een live videorondleiding aan met een IPP-specialist op een van onze locaties wereldwijd.

4

Renovatieopties

IPP biedt revisiediensten aan via haar UGE-divisie (meer dan 700 schepen, meer dan 2700 onderdelen op voorraad). Neem contact op met IPP voor meer informatie over aanvullende diensten.

5

Verpakking en levering

IPP coördineert de verpakking, het inpakken in kratten, het transport en de levering naar uw fabriekslocatie. Wereldwijde verzending vanuit vestigingen in 15 landen.

Industries That Buy Used Holoflite & Screw Dryers

IPP supplies used holoflite & screw dryers to manufacturers across multiple process industries worldwide.

Farmaceutisch

Chemische verwerking

Eten en drinken

Biotechnologie

Landbouwchemicaliën

Fijne chemicaliën

Mijnbouw en mineralen

Cosmetica

Verf en coatings

Petrochemicaliën

Frequently Asked Questions About Buying Used Holoflite & Screw Dryers

Answers to the most common questions from procurement and operations teams evaluating used holoflite and screw dryers.

How many holoflite & screw dryers does IPP have in stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Available in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Browse the IMS inventory for current availability.

What condition grades are available for used holoflite & screw dryers?

IPP stocks holoflite & screw dryers in multiple conditions: Used. Bekijk de actuele voorraad voor de beschikbare condities.

Does IPP sell new holoflite & screw dryers as well as used?

Ja. IPP stocks new holoflite & screw dryers through its Gale Process Solutions (GPS) subsidiary, which provides custom-manufactured equipment with 12–16 week average delivery. Neem contact op met IPP voor meer informatie over nieuwe voorraad.

Welke bouwmaterialen zijn beschikbaar?

IPP stocks holoflite & screw dryers in Carbon Steel, Stainless Steel 316, Stainless Steel 304, Stainless Steel 316L construction. Neem contact op met IPP om de materiaaleisen voor uw toepassing te bespreken.

What manufacturers of holoflite & screw dryers does IPP stock?

IPP stocks holoflite & screw dryers from Joy Denver, Svedala, Hi Line Industries, Reitz, Thies Kg Coesfeld Gmbh and other manufacturers. Bekijk de actuele voorraad om te zien welke fabrikanten beschikbaar zijn.

How much can I save buying used holoflite & screw dryers versus new?

Buying used holoflite & screw dryers from IPP can save up to 50% of capital and 90% of lead time versus buying new. De exacte besparing is afhankelijk van de fabrikant, capaciteit, het gebruikte materiaal en de staat van het apparaat. Neem contact op met IPP voor prijsinformatie over specifieke apparaten.

How long does it take to receive holoflite & screw dryers from IPP?

In-stock holoflite & screw dryers are ready to ship. IPP's GPS subsidiary provides new custom-manufactured equipment with 12–16 week average delivery. IPP verzendt vanuit vestigingen in 15 landen wereldwijd.

Verzorgt IPP de verzending en het transport?

IPP coördineert het verpakken, inpakken, transport en de levering naar uw fabriekslocatie. Met vestigingen in 15 landen. En Wereldwijd meer dan 160.000 klanten bediend., IPP heeft ruime ervaring in de wereldwijde logistiek van apparatuur.

Overige onderdelen en apparatuur van IPP

In addition to holoflite & screw dryers, IPP stocks equipment across multiple categories for complete process solutions.

Filters

Centrifuges

Warmtewisselaars

Looking for New Holoflite & Screw Dryers?

IPP Group levert nieuwe apparatuur via haar dochteronderneming Gale Process Solutions (GPS), die op maat gemaakte apparatuur levert met een gemiddelde levertijd van 12-16 weken. IPP biedt ook gereviseerde apparatuur aan via haar divisie UGE (Universal Glasteel Equipment).

Ready to Buy Holoflite & Screw Dryers?

IPP levert al sinds 1980 hoogwaardige procesapparatuur wereldwijd en heeft meer dan 160.000 klanten. Vertel ons wat u nodig heeft en ons team zal u een passende voorraad en prijsopgave sturen.