Évaporateurs à film ascendant/descendant d'occasion à vendre

Buying used rising and falling film evaporators through International Process Plants gives chemical, pharmaceutical, food, and environmental processors access to thin-film tubular evaporators that move liquid up or down heated tubes for high-efficiency evaporation with short residence time from Kleiser Gmbh, Buflovak/Blaw Knox, Pitton-Gessner/Germany, APV, Betchel, and other OEM manufacturers. ▶

Materials of construction include Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321, and Titanium. Evaporation rates range from 12 kg/h (26.5 lb/h) on IPP# 220572 to 36,300 kg/h (80,000 lb/h) on IPP# 225370. Heat transfer surface areas span from 3.8 m² (40.6 ft²) to 1,450 m² (15,850 ft²).

Multi-effect configurations include two-effect systems from Buflovak/Blaw Knox and Swenson. Most units are rated for vacuum service. Available in used condition. Buying used rising and falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Évaporateurs en stock

1980

Établi depuis

15

Pays ayant des bureaux

PMS Titanium — 36 300 kg/h

IPP# 225370 · Used

Buflovak/Blaw Knox SS 316 — 2-Effect

IPP# 246737 · Used

Kleiser Gmbh SS 316 — 9,400 kg/h

IPP# 706886 · Used

Buy Used Rising/Falling Film Evaporators by Material

IPP stocks rising/falling film evaporators across multiple material options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Rising/Falling Film Evaporators for Sale

IPP stocks stainless steel rising and falling film evaporators in multiple grades including Stainless Steel 316, Austenitic, 304, and 321. Available from Kleiser Gmbh, Pitton-Gessner/Germany, APV, Buflovak/Blaw Knox, and other manufacturers.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area.

Taux d'évaporation :6,750 kg/h (14,900 lb/h)

Surface totale d'échange thermique :262.6 m² (2,850 ft²) surface area

Pression:8,3 bar (120 psi)

Température:148.9 °C (300 °F)

Nombre d'effets :2-effect, vacuum rated

Condition:État d'occasion

Swenson SS 316 — 7,250 kg/h

Used Swenson Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 294 m² (3,150 ft²) heat transfer surface area.

Taux d'évaporation :7,250 kg/h (16,000 lb/h)

Surface totale d'échange thermique :294 m² (3,150 ft²) surface area

Pression:0,97 bar (14 psi)

Température:176.7 °C (350 °F)

Nombre d'effets :2-effect, vacuum rated

Condition:État d'occasion

Acier austénitique Wiegand SS — 14 000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Taux d'évaporation :14,000 kg/h (30,850 lb/h)

Surface totale d'échange thermique :696 m² (7,500 ft²) surface area

Matériel:Acier inoxydable austénitique

Vide:Vacuum rated, vertical

Condition:État d'occasion

Buy Used Other Rising/Falling Film Evaporators for Sale

IPP stocks rising and falling film evaporators in carbon steel and graphite construction for corrosive-duty applications. Available from GESSNER and other manufacturers.

GESSNER Carbon Steel — 6.4 m²

Used GESSNER carbon steel rising/falling film evaporator with 6.4 m² (69 ft²) heat transfer surface area and SS 321 tubes.

Matériel:Carbon Steel shell

Surface totale d'échange thermique :surface de 6,4 m² (69 pi²)

Matériau du tube :SS 321 tubes, vacuum rated

Condition:État d'occasion

Graphite — 7,400 kg/h

Used graphite rising/falling film evaporator with 7,400 kg/h (16,350 lb/h) evaporation rate, titanium centrifugal pumps, and fiberglass vapor bodies.

Matériel:Construction en graphite

Taux d'évaporation :7,400 kg/h (16,350 lb/h)

Détails de la pompe :Titanium centrifugal pumps

Condition:État d'occasion

Buy Used Titanium Rising/Falling Film Evaporators for Sale

IPP stocks titanium rising and falling film evaporators suited for highly corrosive feed streams where stainless steel cannot maintain tube integrity. Available from Plant Maintenance Services Corp. (PMS) and Betchel.

PMS Titanium — 36 300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Taux d'évaporation :36,300 kg/h (80,000 lb/h)

Surface totale d'échange thermique :1,450 m² (15,850 ft²) surface area

Matériel:tubes en titane

Matériau du tube :plaques tubulaires en Inconel

Pression:1.38 bar (20 psi), vacuum rated

Condition:État d'occasion

Betchel 130T Titanium — 18,150 kg/h

Used Betchel 130T titanium rising/falling film evaporator with 18,150 kg/h (40,000 lb/h) evaporation rate, mechanical vapor recompression (MVR), and titanium tubes with titanium tubesheets.

Taux d'évaporation :18,150 kg/h (40,000 lb/h)

Matériau du tube :Titanium

Matériau de la plaque tubulaire :Titanium

MVR:Mechanical vapor recompression

Fabricant:Betchel 130T

Modèle:skirt-mounted

Condition:État d'occasion

Buy Used Rising/Falling Film Evaporators for Sale by Manufacturer

IPP stocks rising and falling film evaporators from a wide range of manufacturers, with Kleiser Gmbh and Buflovak/Blaw Knox representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Kleiser Gmbh Rising/Falling Film Evaporators for Sale

Kleiser Gmbh is the deepest single-manufacturer position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel Austenitic construction across used conditions.

Kleiser Gmbh SS 316 — 9,400 kg/h

Used Kleiser Gmbh Stainless Steel 316 rising/falling film evaporator with 9,400 kg/h (20,700 lb/h) evaporation rate, vacuum rated, with controls included.

Taux d'évaporation :9 400 kg/h (20 700 lb/h)

Matériel:Acier inoxydable 316

Pression:6 bar (87 psi), 200 °C (392 °F)

Vide:sous vide

Commandes :controls included

Condition:État d'occasion

Kleiser Gmbh SS Austenitic — 6,700 kg/h

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 6,700 kg/h (14,750 lb/h) evaporation rate, vertical orientation, vacuum rated.

Taux d'évaporation :6,700 kg/h (14,750 lb/h)

Matériel:Acier inoxydable austénitique

Pression:6 bar (87 psi), 200 °C (392 °F)

Matériau du tube :SS 316 tubes and tubesheets

Condition:État d'occasion

Kleiser Gmbh SS Austenitic — 66.5 m²

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 66.5 m² (716 ft²) heat transfer surface area and 12 kg/h (26.5 lb/h) evaporation rate.

Surface totale d'échange thermique :66.5 m² (716 ft²) surface area

Taux d'évaporation :12 kg/h (26.5 lb/h)

Pression:6 bar (87 psi), 200 °C (392 °F)

Vide:sous vide

Condition:État d'occasion

Buy Used Buflovak/Blaw Knox Rising/Falling Film Evaporators for Sale

Buflovak/Blaw Knox is the second deepest OEM position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel 304 construction with multi-effect configurations.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area in a 2-effect configuration.

Taux d'évaporation :6,750 kg/h (14,900 lb/h)

Surface totale d'échange thermique :262.6 m² (2,850 ft²) surface area

Pression:8,3 bar (120 psi)

Température:148.9 °C (300 °F)

Nombre d'effets :2-effect, vacuum rated

Condition:État d'occasion

Buflovak/Blaw Knox SS 304 — 9,550 kg/h

Used Buflovak/Blaw Knox Stainless Steel 304 rising/falling film evaporator with 9,550 kg/h (21,100 lb/h) evaporation rate and 392.1 m² (4,200 ft²) heat transfer surface area in a 2-effect configuration.

Taux d'évaporation :9,550 kg/h (21,100 lb/h)

Surface totale d'échange thermique :392.1 m² (4,200 ft²) surface area

Pression:0,97 bar (14 psi)

Température:148.9 °C (300 °F)

Nombre d'effets :2-effect with controls

Commandes :vacuum rated

Condition:État d'occasion

Buflovak/Blaw Knox SS 316 — 7,250 kg/h

Used Buflovak/Blaw Knox Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 83.6 m² (900 ft²) heat transfer surface area.

Taux d'évaporation :7,250 kg/h (16,000 lb/h)

Surface totale d'échange thermique :83.6 m² (900 ft²) surface area

Pression:3,4 bar (50 psi)

Température:148.9 °C (300 °F)

Matériel:Acier inoxydable 316

Condition:État d'occasion

Buy Used Rising/Falling Film Evaporators from Other Manufacturers

Beyond Kleiser Gmbh and Buflovak/Blaw Knox, IPP stocks rising and falling film evaporators from Pitton-Gessner/Germany, APV, Betchel, Wiegand, DeSmet, Swenson, Paget Equipment, and other manufacturers. These units span laboratory-scale through large industrial-capacity duties.

APV Mitchell SS 316 — 7,600 kg/h

Used APV Mitchell Stainless Steel 316 rising/falling film evaporator with 7,600 kg/h (16,800 lb/h) evaporation rate and 24.9 m² (268 ft²) heat transfer surface area.

Taux d'évaporation :7,600 kg/h (16,800 lb/h)

Surface totale d'échange thermique :24.9 m² (268 ft²) surface area

Matériel:Acier inoxydable 316

Vide:sous vide

Condition:État d'occasion

Pitton-Gessner/Germany SS Austenitic — 49.8 m²

Used Pitton-Gessner/Germany model 1.4571/H2 Stainless Steel Austenitic rising/falling film evaporator with 49.8 m² (536 ft²) heat transfer surface area, vacuum rated.

Surface totale d'échange thermique :49.8 m² (536 ft²) surface area

Matériel:Acier inoxydable austénitique

Pression:3 bars (43,5 psi)

Température:200 °C (392 °F)

Modèle:Model 1.4571/H2, vacuum rated

Condition:État d'occasion

DeSmet SS 316 — 1,350 kg/h

Used DeSmet Stainless Steel 316 rising/falling film evaporator with 1,350 kg/h (3,000 lb/h) evaporation rate and 18 m² (194 ft²) heat transfer surface area, vertical orientation.

Taux d'évaporation :1,350 kg/h (3,000 lb/h)

Surface totale d'échange thermique :18 m² (194 ft²) surface area

Pression:3 bars (43,5 psi)

Température:160 °C (320 °F)

Matériel:Acier inoxydable 316

Condition:État d'occasion

Buy Used Rising/Falling Film Evaporators for Sale by Condition

IPP stocks rising and falling film evaporators in used condition. All units were previously installed in production service, inspected on intake, and are offered with traceable provenance at meaningful savings versus new OEM pricing.

Évaporateurs à film ascendant/descendant d'occasion à vendre

Good used rising and falling film evaporators represent the full inventory position at IPP. These units were previously installed in production service, inspected on intake, and are offered as-is at meaningful savings while retaining OEM tube bundles, vapor bodies, and ancillary hardware.

Used PMS Titanium — 36,300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Condition:État d'occasion

Taux d'évaporation :36,300 kg/h (80,000 lb/h)

Surface totale d'échange thermique :1,450 m² (15,850 ft²) surface area

Matériel:Titanium tubes, Inconel tubesheets

Vide:Vacuum rated, vertical

Used Wiegand SS Austenitic — 14,000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Condition:État d'occasion

Taux d'évaporation :14,000 kg/h (30,850 lb/h)

Surface totale d'échange thermique :696 m² (7,500 ft²) surface area

Matériel:Acier inoxydable austénitique

Vide:Vacuum rated, vertical

Used Paget Equipment SS 304 — 2,250 kg/h

Used Paget Equipment Stainless Steel 304 rising/falling film evaporator with 2,250 kg/h (5,000 lb/h) evaporation rate and 67.4 m² (725 ft²) heat transfer surface area.

Condition:État d'occasion

Taux d'évaporation :2,250 kg/h (5,000 lb/h)

Surface totale d'échange thermique :67.4 m² (725 ft²) surface area

Pression:10,3 bar (150 psi)

Température:232.2 °C (450 °F)

Vide:Vacuum rated, vertical

Ready to Buy a Used Rising/Falling Film Evaporator?

Tell us your specifications and requirements. Our team will match your needs against current rising and falling film evaporator inventory and provide a detailed quote.

Buying Used Rising/Falling Film Evaporators vs Buying New

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new rising/falling film evaporators compare across key factors.

Facteur	Utilisé à partir de l'IPP	Neuf (OEM)
Coût de l'équipement	Économies importantes par rapport au prix du nouveau constructeur	Prix catalogue complet du fabricant
Délai de livraison	Unités en stock prêtes à être expédiées	Extended lead times (new build)
Matériels	Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321	Spécifié sur mesure
Pressions nominales	0.97 bar (14 psi) to 10.3 bar (150 psi)	Fabriqué sur mesure selon les spécifications
Fabricants	Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox and others	OEM unique
Impact environnemental	Prolonge la durée de vie des équipements, réduit les déchets	nouvelle consommation de matières premières

Advantages of Buying Used Rising/Falling Film Evaporators from IPP

International Process Plants combine plus de 46 ans d'expertise en équipements de traitement, près de 150 collaborateurs répartis dans 15 pays et un stock de 15 000 systèmes de traitement et équipements majeurs pour fournir des réacteurs prêts pour votre procédé.

Des économies de coûts importantes

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilité immédiate

In-stock rising/falling film evaporators from IPP are ready to ship. IPP's GPS subsidiary also provides custom-built new equipment with 12–16 week average delivery.

Fabricants OEM multiples

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel and other manufacturers. Every unit is an original OEM product with traceable provenance.

Qualité et remise à neuf

IPP propose des services de remise à neuf par le biais de sa division UGE (Universal Glasteel Equipment), fondée en 1995, qui dispose d'un stock de plus de 700 navires et de plus de 2 700 pièces.

Présence mondiale dans 15 pays

IPP possède des bureaux dans 15 pays : Allemagne, Brésil, Canada, Chine, Espagne, États-Unis, France, Inde, Italie, Mexique, Pakistan, Portugal, République tchèque, Roumanie, Royaume-Uni et Turquie. IPP a servi plus de 160 000 clients dans le monde entier.

Gamme complète de matériaux et de spécifications

IPP stocks rising/falling film evaporators across a wide range of specifications to match your process requirements.

How Buying a Used Rising/Falling Film Evaporator Works

The process of purchasing used rising/falling film evaporators from IPP follows five steps, from specification to delivery.

1

Soumettre les exigences

Indiquez vos spécifications : capacité, matériau de construction, pression nominale, température et application. Ou consultez notre catalogue.

2

Réception du paquet de données

IPP envoie une fiche technique détaillée de l'équipement comprenant les spécifications, les dimensions, un rapport d'état et des photographies.

3

Inspecter l'équipement

Contact IPP to arrange an on-site visit or request a live video walkthrough with an IPP specialist at one of our global locations.

4

Options de rénovation

IPP propose des services de rénovation par le biais de sa division UGE (plus de 700 navires, plus de 2 700 pièces en stock). Contactez IPP pour plus d'informations sur les services complémentaires.

5

Emballage et livraison

IPP prend en charge l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Expédition internationale depuis nos bureaux situés dans 15 pays.

Industries That Buy Used Rising/Falling Film Evaporators

IPP supplies used rising/falling film evaporators to manufacturers across multiple process industries worldwide.

Traitement chimique

Pharmaceutique

Restauration

Laitier

Produits pétrochimiques

Environnement

Biotechnologie

Pâte à papier et papier

Peintures et revêtements

Produits pétrochimiques

Frequently Asked Questions About Buying Used Rising/Falling Film Evaporators

Answers to the most common questions from procurement and operations teams evaluating used rising and falling film evaporators.

How many rising/falling film evaporators does IPP have in stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Available in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Browse the IMS inventory for current availability.

What condition grades are available for used rising/falling film evaporators?

IPP stocks rising/falling film evaporators in multiple conditions: Used. Consultez l'inventaire actuel pour connaître les options disponibles.

Does IPP sell new rising/falling film evaporators as well as used?

Oui. IPP stocks new rising/falling film evaporators through its Gale Process Solutions (GPS) subsidiary, which provides custom-built equipment with 12–16 week average delivery. Contactez IPP pour plus de détails sur les nouveaux stocks.

Quels matériaux de construction sont disponibles ?

IPP stocks rising/falling film evaporators in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Contactez IPP pour discuter des exigences matérielles de votre application.

What manufacturers of rising/falling film evaporators does IPP stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Consultez l'inventaire actuel pour voir les fabricants disponibles.

How much can I save buying used rising/falling film evaporators versus new?

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Les économies exactes dépendent du fabricant, de la capacité, des matériaux de construction et de l'état du produit. Contactez IPP pour obtenir un devis pour un modèle spécifique.

How long does it take to receive rising/falling film evaporators from IPP?

In-stock rising/falling film evaporators are ready to ship. IPP's GPS subsidiary provides new custom-built equipment with 12–16 week average delivery. IPP expédie ses produits depuis des bureaux situés dans 15 pays à travers le monde.

IPP gère-t-il l'expédition et le fret ?

IPP coordonne l'emballage, la mise en caisse, le transport et la livraison jusqu'à votre site de production. Avec des bureaux dans 15 pays et Plus de 160 000 clients servis dans le monde entier, IPP possède une vaste expérience en matière de logistique mondiale d'équipements.

Autres pièces et équipements d'IPP

In addition to rising/falling film evaporators, IPP stocks equipment across multiple categories for complete process solutions.

Échangeurs de chaleur

Réacteurs

chars

Looking for New Rising/Falling Film Evaporators?

Le groupe IPP fournit des équipements en alliage neufs par l'intermédiaire de sa filiale Gale Process Solutions (GPS), qui propose des équipements sur mesure avec un délai de livraison moyen de 12 à 16 semaines. IPP propose également des équipements neufs et reconditionnés par le biais de sa division UGE (Universal Glasteel Equipment).

Ready to Buy Rising/Falling Film Evaporators?

Depuis 1980, IPP fournit des équipements de process de qualité dans le monde entier et compte plus de 160 000 clients. Faites-nous part de vos besoins : notre équipe vous proposera les produits et les prix adaptés.