Buy Used Rising/Falling Film Evaporators for Sale

Buying used rising and falling film evaporators through International Process Plants gives chemical, pharmaceutical, food, and environmental processors access to thin-film tubular evaporators that move liquid up or down heated tubes for high-efficiency evaporation with short residence time from Kleiser Gmbh, Buflovak/Blaw Knox, Pitton-Gessner/Germany, APV, Betchel, and other OEM manufacturers. ▶

Materials of construction include Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321, and Titanium. Evaporation rates range from 12 kg/h (26.5 lb/h) on IPP# 220572 to 36,300 kg/h (80,000 lb/h) on IPP# 225370. Heat transfer surface areas span from 3.8 m² (40.6 ft²) to 1,450 m² (15,850 ft²).

Multi-effect configurations include two-effect systems from Buflovak/Blaw Knox and Swenson. Most units are rated for vacuum service. Available in used condition. Buying used rising and falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Evaporators in Stock

1980

Establecido desde

15

Países con oficinas

PMS Titanium — 36,300 kg/h

IPP# 225370 · Used

Buflovak/Blaw Knox SS 316 — 2-Effect

IPP# 246737 · Used

Kleiser Gmbh SS 316 — 9,400 kg/h

IPP# 706886 · Used

Buy Used Rising/Falling Film Evaporators by Material

IPP stocks rising/falling film evaporators across multiple material options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Rising/Falling Film Evaporators for Sale

IPP stocks stainless steel rising and falling film evaporators in multiple grades including Stainless Steel 316, Austenitic, 304, and 321. Available from Kleiser Gmbh, Pitton-Gessner/Germany, APV, Buflovak/Blaw Knox, and other manufacturers.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area.

Tasa de evaporación:6,750 kg/h (14,900 lb/h)

Superficie total de transferencia de calor:262.6 m² (2,850 ft²) surface area

Presión:8.3 bar (120 psi)

Temperatura:148,9 °C (300 °F)

Number of Effects:2-effect, vacuum rated

Condición:Estado usado

Swenson SS 316 — 7,250 kg/h

Used Swenson Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 294 m² (3,150 ft²) heat transfer surface area.

Tasa de evaporación:7,250 kg/h (16,000 lb/h)

Superficie total de transferencia de calor:294 m² (3,150 ft²) surface area

Presión:0.97 bar (14 psi)

Temperatura:176.7 °C (350 °F)

Number of Effects:2-effect, vacuum rated

Condición:Estado usado

Wiegand SS Austenitic — 14,000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Tasa de evaporación:14,000 kg/h (30,850 lb/h)

Superficie total de transferencia de calor:696 m² (7,500 ft²) surface area

Material:Acero inoxidable austenítico

Vacío:Vacuum rated, vertical

Condición:Estado usado

Buy Used Other Rising/Falling Film Evaporators for Sale

IPP stocks rising and falling film evaporators in carbon steel and graphite construction for corrosive-duty applications. Available from GESSNER and other manufacturers.

GESSNER Carbon Steel — 6.4 m²

Used GESSNER carbon steel rising/falling film evaporator with 6.4 m² (69 ft²) heat transfer surface area and SS 321 tubes.

Material:Carbon Steel shell

Superficie total de transferencia de calor:6.4 m² (69 ft²) surface area

Tube Material:SS 321 tubes, vacuum rated

Condición:Estado usado

Graphite — 7,400 kg/h

Used graphite rising/falling film evaporator with 7,400 kg/h (16,350 lb/h) evaporation rate, titanium centrifugal pumps, and fiberglass vapor bodies.

Material:Graphite construction

Tasa de evaporación:7,400 kg/h (16,350 lb/h)

Pump Details:Titanium centrifugal pumps

Condición:Estado usado

Buy Used Titanium Rising/Falling Film Evaporators for Sale

IPP stocks titanium rising and falling film evaporators suited for highly corrosive feed streams where stainless steel cannot maintain tube integrity. Available from Plant Maintenance Services Corp. (PMS) and Betchel.

PMS Titanium — 36,300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Tasa de evaporación:36,300 kg/h (80,000 lb/h)

Superficie total de transferencia de calor:1,450 m² (15,850 ft²) surface area

Material:Titanium tubes

Tube Material:Inconel tubesheets

Presión:1.38 bar (20 psi), vacuum rated

Condición:Estado usado

Betchel 130T Titanium — 18,150 kg/h

Used Betchel 130T titanium rising/falling film evaporator with 18,150 kg/h (40,000 lb/h) evaporation rate, mechanical vapor recompression (MVR), and titanium tubes with titanium tubesheets.

Tasa de evaporación:18,150 kg/h (40,000 lb/h)

Tube Material:Titanio

Tubesheet Material:Titanio

MVR:Mechanical vapor recompression

Fabricante:Betchel 130T

Modelo:skirt-mounted

Condición:Estado usado

Buy Used Rising/Falling Film Evaporators for Sale by Manufacturer

IPP stocks rising and falling film evaporators from a wide range of manufacturers, with Kleiser Gmbh and Buflovak/Blaw Knox representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Kleiser Gmbh Rising/Falling Film Evaporators for Sale

Kleiser Gmbh is the deepest single-manufacturer position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel Austenitic construction across used conditions.

Kleiser Gmbh SS 316 — 9,400 kg/h

Used Kleiser Gmbh Stainless Steel 316 rising/falling film evaporator with 9,400 kg/h (20,700 lb/h) evaporation rate, vacuum rated, with controls included.

Tasa de evaporación:9.400 kg/h (20.700 lb/h)

Material:Acero inoxidable 316

Presión:6 bar (87 psi), 200 °C (392 °F)

Vacío:Clasificado para vacío

Controles:controls included

Condición:Estado usado

Kleiser Gmbh SS Austenitic — 6,700 kg/h

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 6,700 kg/h (14,750 lb/h) evaporation rate, vertical orientation, vacuum rated.

Tasa de evaporación:6,700 kg/h (14,750 lb/h)

Material:Acero inoxidable austenítico

Presión:6 bar (87 psi), 200 °C (392 °F)

Tube Material:SS 316 tubes and tubesheets

Condición:Estado usado

Kleiser Gmbh SS Austenitic — 66.5 m²

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 66.5 m² (716 ft²) heat transfer surface area and 12 kg/h (26.5 lb/h) evaporation rate.

Superficie total de transferencia de calor:66.5 m² (716 ft²) surface area

Tasa de evaporación:12 kg/h (26.5 lb/h)

Presión:6 bar (87 psi), 200 °C (392 °F)

Vacío:Clasificado para vacío

Condición:Estado usado

Buy Used Buflovak/Blaw Knox Rising/Falling Film Evaporators for Sale

Buflovak/Blaw Knox is the second deepest OEM position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel 304 construction with multi-effect configurations.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area in a 2-effect configuration.

Tasa de evaporación:6,750 kg/h (14,900 lb/h)

Superficie total de transferencia de calor:262.6 m² (2,850 ft²) surface area

Presión:8.3 bar (120 psi)

Temperatura:148,9 °C (300 °F)

Number of Effects:2-effect, vacuum rated

Condición:Estado usado

Buflovak/Blaw Knox SS 304 — 9,550 kg/h

Used Buflovak/Blaw Knox Stainless Steel 304 rising/falling film evaporator with 9,550 kg/h (21,100 lb/h) evaporation rate and 392.1 m² (4,200 ft²) heat transfer surface area in a 2-effect configuration.

Tasa de evaporación:9,550 kg/h (21,100 lb/h)

Superficie total de transferencia de calor:392.1 m² (4,200 ft²) surface area

Presión:0.97 bar (14 psi)

Temperatura:148,9 °C (300 °F)

Number of Effects:2-effect with controls

Controles:vacuum rated

Condición:Estado usado

Buflovak/Blaw Knox SS 316 — 7,250 kg/h

Used Buflovak/Blaw Knox Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 83.6 m² (900 ft²) heat transfer surface area.

Tasa de evaporación:7,250 kg/h (16,000 lb/h)

Superficie total de transferencia de calor:83.6 m² (900 ft²) surface area

Presión:3,4 bar (50 psi)

Temperatura:148,9 °C (300 °F)

Material:Acero inoxidable 316

Condición:Estado usado

Buy Used Rising/Falling Film Evaporators from Other Manufacturers

Beyond Kleiser Gmbh and Buflovak/Blaw Knox, IPP stocks rising and falling film evaporators from Pitton-Gessner/Germany, APV, Betchel, Wiegand, DeSmet, Swenson, Paget Equipment, and other manufacturers. These units span laboratory-scale through large industrial-capacity duties.

APV Mitchell SS 316 — 7,600 kg/h

Used APV Mitchell Stainless Steel 316 rising/falling film evaporator with 7,600 kg/h (16,800 lb/h) evaporation rate and 24.9 m² (268 ft²) heat transfer surface area.

Tasa de evaporación:7,600 kg/h (16,800 lb/h)

Superficie total de transferencia de calor:24.9 m² (268 ft²) surface area

Material:Acero inoxidable 316

Vacío:Clasificado para vacío

Condición:Estado usado

Pitton-Gessner/Germany SS Austenitic — 49.8 m²

Used Pitton-Gessner/Germany model 1.4571/H2 Stainless Steel Austenitic rising/falling film evaporator with 49.8 m² (536 ft²) heat transfer surface area, vacuum rated.

Superficie total de transferencia de calor:49.8 m² (536 ft²) surface area

Material:Acero inoxidable austenítico

Presión:3 bar (43,5 psi)

Temperatura:200 °C (392 °F)

Modelo:Model 1.4571/H2, vacuum rated

Condición:Estado usado

DeSmet SS 316 — 1,350 kg/h

Used DeSmet Stainless Steel 316 rising/falling film evaporator with 1,350 kg/h (3,000 lb/h) evaporation rate and 18 m² (194 ft²) heat transfer surface area, vertical orientation.

Tasa de evaporación:1,350 kg/h (3,000 lb/h)

Superficie total de transferencia de calor:18 m² (194 ft²) surface area

Presión:3 bar (43,5 psi)

Temperatura:160 °C (320 °F)

Material:Acero inoxidable 316

Condición:Estado usado

Buy Used Rising/Falling Film Evaporators for Sale by Condition

IPP stocks rising and falling film evaporators in used condition. All units were previously installed in production service, inspected on intake, and are offered with traceable provenance at meaningful savings versus new OEM pricing.

Buy Used Rising/Falling Film Evaporators for Sale

Good used rising and falling film evaporators represent the full inventory position at IPP. These units were previously installed in production service, inspected on intake, and are offered as-is at meaningful savings while retaining OEM tube bundles, vapor bodies, and ancillary hardware.

Used PMS Titanium — 36,300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Condición:Estado usado

Tasa de evaporación:36,300 kg/h (80,000 lb/h)

Superficie total de transferencia de calor:1,450 m² (15,850 ft²) surface area

Material:Titanium tubes, Inconel tubesheets

Vacío:Vacuum rated, vertical

Used Wiegand SS Austenitic — 14,000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Condición:Estado usado

Tasa de evaporación:14,000 kg/h (30,850 lb/h)

Superficie total de transferencia de calor:696 m² (7,500 ft²) surface area

Material:Acero inoxidable austenítico

Vacío:Vacuum rated, vertical

Used Paget Equipment SS 304 — 2,250 kg/h

Used Paget Equipment Stainless Steel 304 rising/falling film evaporator with 2,250 kg/h (5,000 lb/h) evaporation rate and 67.4 m² (725 ft²) heat transfer surface area.

Condición:Estado usado

Tasa de evaporación:2,250 kg/h (5,000 lb/h)

Superficie total de transferencia de calor:67.4 m² (725 ft²) surface area

Presión:10,3 bar (150 psi)

Temperatura:232,2 °C (450 °F)

Vacío:Vacuum rated, vertical

Ready to Buy a Used Rising/Falling Film Evaporator?

Tell us your specifications and requirements. Our team will match your needs against current rising and falling film evaporator inventory and provide a detailed quote.

Buying Used Rising/Falling Film Evaporators vs Buying New

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new rising/falling film evaporators compare across key factors.

Factor	Utilizado desde IPP	Nuevo (OEM)
Costo del equipo	Ahorro significativo en comparación con el precio de un producto nuevo del fabricante.	Precio de lista completo del fabricante
Cronograma de entrega	Unidades en stock listas para enviar	Extended lead times (new build)
Materiales	Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321	Especificado a medida
Clasificación de presión	0.97 bar (14 psi) to 10.3 bar (150 psi)	Fabricado a medida según las especificaciones.
Fabricantes	Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox and others	Fabricante de equipos originales único
Impacto ambiental	Prolonga la vida útil de los equipos y reduce los residuos.	Consumo de nuevas materias primas

Advantages of Buying Used Rising/Falling Film Evaporators from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver rising/falling film evaporators ready for your process.

Ahorro de costes significativo

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Disponibilidad inmediata

In-stock rising/falling film evaporators from IPP are ready to ship. IPP's GPS subsidiary also provides custom-built new equipment with 12–16 week average delivery.

Múltiples fabricantes de equipos originales (OEM)

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel and other manufacturers. Every unit is an original OEM product with traceable provenance.

Calidad y Remodelación

IPP ofrece servicios de reacondicionamiento a través de su división UGE (Universal Glasteel Equipment), fundada en 1995, que cuenta con un stock de más de 700 recipientes y más de 2700 piezas.

Presencia global en 15 países.

IPP cuenta con oficinas en 15 países: Brasil, Canadá, China, República Checa, Francia, Alemania, India, Italia, México, Pakistán, Portugal, Rumania, Turquía, Reino Unido y Estados Unidos. IPP ha prestado servicios a más de 160 000 clientes en todo el mundo.

Amplia gama de materiales y especificaciones.

IPP stocks rising/falling film evaporators across a wide range of specifications to match your process requirements.

How Buying a Used Rising/Falling Film Evaporator Works

The process of purchasing used rising/falling film evaporators from IPP follows five steps, from specification to delivery.

1

Enviar requisitos

Comparta sus especificaciones: capacidad, material de construcción, presión nominal, temperatura y aplicación. O explore nuestro catálogo con función de búsqueda.

2

Recibir paquete de datos

IPP envía una ficha técnica detallada del equipo con especificaciones, dimensiones, informe de estado y fotografías.

3

Inspeccione el equipo.

Póngase en contacto con IPP para concertar una visita in situ o solicitar un recorrido virtual en directo con un especialista de IPP en una de nuestras sedes internacionales.

4

Opciones de renovación

IPP ofrece servicios de reacondicionamiento a través de su división UGE (más de 700 buques, más de 2700 piezas en stock). Póngase en contacto con IPP para obtener más información sobre servicios adicionales.

5

Embalaje y entrega

IPP coordina el embalaje, el empaquetado, el transporte y la entrega en su planta. Envíos internacionales desde oficinas en 15 países.

Industries That Buy Used Rising/Falling Film Evaporators

IPP supplies used rising/falling film evaporators to manufacturers across multiple process industries worldwide.

Procesamiento químico

Farmacéutico

Alimentos y bebidas

Dairy

Petroquímicos

Ambiental

Biotecnología

Pulpa y papel

Pinturas y recubrimientos

Petroquímicos

Frequently Asked Questions About Buying Used Rising/Falling Film Evaporators

Answers to the most common questions from procurement and operations teams evaluating used rising and falling film evaporators.

How many rising/falling film evaporators does IPP have in stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Available in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Browse the IMS inventory for current availability.

What condition grades are available for used rising/falling film evaporators?

IPP stocks rising/falling film evaporators in multiple conditions: Used. Consulte el inventario actual para ver las opciones de estado disponibles.

Does IPP sell new rising/falling film evaporators as well as used?

Sí. IPP stocks new rising/falling film evaporators through its Gale Process Solutions (GPS) subsidiary, which provides custom-built equipment with 12–16 week average delivery. Póngase en contacto con IPP para obtener más información sobre el nuevo inventario.

¿Qué materiales de construcción están disponibles?

IPP stocks rising/falling film evaporators in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Póngase en contacto con IPP para hablar sobre los requisitos de materiales para su aplicación.

What manufacturers of rising/falling film evaporators does IPP stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Consulte el inventario actual para ver los fabricantes disponibles.

How much can I save buying used rising/falling film evaporators versus new?

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. El ahorro exacto depende del fabricante, la capacidad, el material de construcción y el estado del equipo. Para conocer los precios de unidades específicas, póngase en contacto con IPP.

How long does it take to receive rising/falling film evaporators from IPP?

In-stock rising/falling film evaporators are ready to ship. La filial de GPS de IPP proporciona equipos nuevos fabricados a medida con un plazo de entrega medio de 12 a 16 semanas. IPP realiza envíos desde oficinas en 15 países de todo el mundo.

¿IPP se encarga del envío y el transporte de mercancías?

IPP coordina el embalaje, el empaquetado, el transporte y la entrega en su planta. Con oficinas en 15 países. y Más de 160.000 clientes atendidos en todo el mundo., IPP cuenta con una amplia experiencia en logística global de equipos.

Otras piezas y equipos de IPP

In addition to rising/falling film evaporators, IPP stocks equipment across multiple categories for complete process solutions.

Intercambiadores de calor

Reactores

Tanques

Looking for New Rising/Falling Film Evaporators?

IPP Group suministra equipos nuevos a través de su filial Gale Process Solutions (GPS), que ofrece equipos a medida con un plazo de entrega promedio de 12 a 16 semanas. IPP también ofrece equipos reacondicionados mediante su división UGE (Universal Glasteel Equipment).

Ready to Buy Rising/Falling Film Evaporators?

Desde 1980, IPP suministra equipos de proceso de alta calidad a nivel mundial, atendiendo a más de 160 000 clientes. Díganos qué necesita: nuestro equipo le ofrecerá el inventario y los precios que mejor se ajusten a sus necesidades.