Gebrauchte Steig-/Fallfilmverdampfer zu verkaufen

Buying used rising and falling film evaporators through International Process Plants gives chemical, pharmaceutical, food, and environmental processors access to thin-film tubular evaporators that move liquid up or down heated tubes for high-efficiency evaporation with short residence time from Kleiser Gmbh, Buflovak/Blaw Knox, Pitton-Gessner/Germany, APV, Betchel, and other OEM manufacturers. ▶

Materials of construction include Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321, and Titanium. Evaporation rates range from 12 kg/h (26.5 lb/h) on IPP# 220572 to 36,300 kg/h (80,000 lb/h) on IPP# 225370. Heat transfer surface areas span from 3.8 m² (40.6 ft²) to 1,450 m² (15,850 ft²).

Multi-effect configurations include two-effect systems from Buflovak/Blaw Knox and Swenson. Most units are rated for vacuum service. Available in used condition. Buying used rising and falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

25+

Verdampfer auf Lager

1980

Gegründet seit

15

Länder mit Büros

PMS Titanium — 36.300 kg/h

IPP# 225370 · Used

Buflovak/Blaw Knox SS 316 — 2-Effekt

IPP# 246737 · Used

Kleiser Gmbh SS 316 — 9,400 kg/h

IPP# 706886 · Used

Buy Used Rising/Falling Film Evaporators by Material

IPP stocks rising/falling film evaporators across multiple material options. Choose the material that matches your process requirements.

Buy Used Stainless Steel Rising/Falling Film Evaporators for Sale

IPP stocks stainless steel rising and falling film evaporators in multiple grades including Stainless Steel 316, Austenitic, 304, and 321. Available from Kleiser Gmbh, Pitton-Gessner/Germany, APV, Buflovak/Blaw Knox, and other manufacturers.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area.

Verdunstungsrate:6,750 kg/h (14,900 lb/h)

Gesamte Wärmeübertragungsfläche:262.6 m² (2,850 ft²) surface area

Druck:8,3 bar (120 psi)

Temperatur:148,9 °C (300 °F)

Anzahl der Effekte:2-effect, vacuum rated

Zustand:Gebraucht

Swenson SS 316 — 7,250 kg/h

Used Swenson Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 294 m² (3,150 ft²) heat transfer surface area.

Verdunstungsrate:7,250 kg/h (16,000 lb/h)

Gesamte Wärmeübertragungsfläche:294 m² (3,150 ft²) surface area

Druck:0,97 bar (14 psi)

Temperatur:176.7 °C (350 °F)

Anzahl der Effekte:2-effect, vacuum rated

Zustand:Gebraucht

Wiegand SS Austenitisch — 14.000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Verdunstungsrate:14,000 kg/h (30,850 lb/h)

Gesamte Wärmeübertragungsfläche:696 m² (7,500 ft²) surface area

Material:Edelstahl austenitisch

Vakuum:Vacuum rated, vertical

Zustand:Gebraucht

Buy Used Other Rising/Falling Film Evaporators for Sale

IPP stocks rising and falling film evaporators in carbon steel and graphite construction for corrosive-duty applications. Available from GESSNER and other manufacturers.

GESSNER Carbon Steel — 6.4 m²

Used GESSNER carbon steel rising/falling film evaporator with 6.4 m² (69 ft²) heat transfer surface area and SS 321 tubes.

Material:Carbon Steel shell

Gesamte Wärmeübertragungsfläche:6,4 m² (69 ft²) Oberfläche

Rohrmaterial:SS 321 tubes, vacuum rated

Zustand:Gebraucht

Graphite — 7,400 kg/h

Used graphite rising/falling film evaporator with 7,400 kg/h (16,350 lb/h) evaporation rate, titanium centrifugal pumps, and fiberglass vapor bodies.

Material:Graphitkonstruktion

Verdunstungsrate:7,400 kg/h (16,350 lb/h)

Pumpendetails:Titanium centrifugal pumps

Zustand:Gebraucht

Buy Used Titanium Rising/Falling Film Evaporators for Sale

IPP stocks titanium rising and falling film evaporators suited for highly corrosive feed streams where stainless steel cannot maintain tube integrity. Available from Plant Maintenance Services Corp. (PMS) and Betchel.

PMS Titanium — 36.300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Verdunstungsrate:36,300 kg/h (80,000 lb/h)

Gesamte Wärmeübertragungsfläche:1,450 m² (15,850 ft²) surface area

Material:Titanrohre

Rohrmaterial:Inconel-Rohrböden

Druck:1.38 bar (20 psi), vacuum rated

Zustand:Gebraucht

Betchel 130T Titanium — 18,150 kg/h

Used Betchel 130T titanium rising/falling film evaporator with 18,150 kg/h (40,000 lb/h) evaporation rate, mechanical vapor recompression (MVR), and titanium tubes with titanium tubesheets.

Verdunstungsrate:18,150 kg/h (40,000 lb/h)

Rohrmaterial:Titan

Rohrbodenmaterial:Titan

MVR:Mechanical vapor recompression

Hersteller:Betchel 130T

Modell:skirt-mounted

Zustand:Gebraucht

Buy Used Rising/Falling Film Evaporators for Sale by Manufacturer

IPP stocks rising and falling film evaporators from a wide range of manufacturers, with Kleiser Gmbh and Buflovak/Blaw Knox representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure and replacement parts.

Buy Used Kleiser Gmbh Rising/Falling Film Evaporators for Sale

Kleiser Gmbh is the deepest single-manufacturer position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel Austenitic construction across used conditions.

Kleiser Gmbh SS 316 — 9,400 kg/h

Used Kleiser Gmbh Stainless Steel 316 rising/falling film evaporator with 9,400 kg/h (20,700 lb/h) evaporation rate, vacuum rated, with controls included.

Verdunstungsrate:9.400 kg/h (20.700 lb/h)

Material:Edelstahl 316

Druck:6 bar (87 psi), 200 °C (392 °F)

Vakuum:Vakuumgeeignet

Bedienelemente:controls included

Zustand:Gebraucht

Kleiser Gmbh SS Austenitic — 6,700 kg/h

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 6,700 kg/h (14,750 lb/h) evaporation rate, vertical orientation, vacuum rated.

Verdunstungsrate:6,700 kg/h (14,750 lb/h)

Material:Edelstahl austenitisch

Druck:6 bar (87 psi), 200 °C (392 °F)

Rohrmaterial:SS 316 tubes and tubesheets

Zustand:Gebraucht

Kleiser Gmbh SS Austenitic — 66.5 m²

Used Kleiser Gmbh Stainless Steel Austenitic rising/falling film evaporator with 66.5 m² (716 ft²) heat transfer surface area and 12 kg/h (26.5 lb/h) evaporation rate.

Gesamte Wärmeübertragungsfläche:66.5 m² (716 ft²) surface area

Verdunstungsrate:12 kg/h (26.5 lb/h)

Druck:6 bar (87 psi), 200 °C (392 °F)

Vakuum:Vakuumgeeignet

Zustand:Gebraucht

Buy Used Buflovak/Blaw Knox Rising/Falling Film Evaporators for Sale

Buflovak/Blaw Knox is the second deepest OEM position in IPP’s rising/falling film evaporator inventory. Available in Stainless Steel 316 and Stainless Steel 304 construction with multi-effect configurations.

Buflovak/Blaw Knox SS 316 — 6,750 kg/h

Used Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 rising/falling film evaporator with 6,750 kg/h (14,900 lb/h) evaporation rate and 262.6 m² (2,850 ft²) heat transfer surface area in a 2-effect configuration.

Verdunstungsrate:6,750 kg/h (14,900 lb/h)

Gesamte Wärmeübertragungsfläche:262.6 m² (2,850 ft²) surface area

Druck:8,3 bar (120 psi)

Temperatur:148,9 °C (300 °F)

Anzahl der Effekte:2-effect, vacuum rated

Zustand:Gebraucht

Buflovak/Blaw Knox SS 304 — 9,550 kg/h

Used Buflovak/Blaw Knox Stainless Steel 304 rising/falling film evaporator with 9,550 kg/h (21,100 lb/h) evaporation rate and 392.1 m² (4,200 ft²) heat transfer surface area in a 2-effect configuration.

Verdunstungsrate:9,550 kg/h (21,100 lb/h)

Gesamte Wärmeübertragungsfläche:392.1 m² (4,200 ft²) surface area

Druck:0,97 bar (14 psi)

Temperatur:148,9 °C (300 °F)

Anzahl der Effekte:2-effect with controls

Bedienelemente:vacuum rated

Zustand:Gebraucht

Buflovak/Blaw Knox SS 316 — 7,250 kg/h

Used Buflovak/Blaw Knox Stainless Steel 316 rising/falling film evaporator with 7,250 kg/h (16,000 lb/h) evaporation rate and 83.6 m² (900 ft²) heat transfer surface area.

Verdunstungsrate:7,250 kg/h (16,000 lb/h)

Gesamte Wärmeübertragungsfläche:83.6 m² (900 ft²) surface area

Druck:3,4 bar (50 psi)

Temperatur:148,9 °C (300 °F)

Material:Edelstahl 316

Zustand:Gebraucht

Buy Used Rising/Falling Film Evaporators from Other Manufacturers

Beyond Kleiser Gmbh and Buflovak/Blaw Knox, IPP stocks rising and falling film evaporators from Pitton-Gessner/Germany, APV, Betchel, Wiegand, DeSmet, Swenson, Paget Equipment, and other manufacturers. These units span laboratory-scale through large industrial-capacity duties.

APV Mitchell SS 316 — 7,600 kg/h

Used APV Mitchell Stainless Steel 316 rising/falling film evaporator with 7,600 kg/h (16,800 lb/h) evaporation rate and 24.9 m² (268 ft²) heat transfer surface area.

Verdunstungsrate:7,600 kg/h (16,800 lb/h)

Gesamte Wärmeübertragungsfläche:24.9 m² (268 ft²) surface area

Material:Edelstahl 316

Vakuum:Vakuumgeeignet

Zustand:Gebraucht

Pitton-Gessner/Germany SS Austenitic — 49.8 m²

Used Pitton-Gessner/Germany model 1.4571/H2 Stainless Steel Austenitic rising/falling film evaporator with 49.8 m² (536 ft²) heat transfer surface area, vacuum rated.

Gesamte Wärmeübertragungsfläche:49.8 m² (536 ft²) surface area

Material:Edelstahl austenitisch

Druck:3 bar (43,5 psi)

Temperatur:200 °C (392 °F)

Modell:Model 1.4571/H2, vacuum rated

Zustand:Gebraucht

DeSmet SS 316 — 1,350 kg/h

Used DeSmet Stainless Steel 316 rising/falling film evaporator with 1,350 kg/h (3,000 lb/h) evaporation rate and 18 m² (194 ft²) heat transfer surface area, vertical orientation.

Verdunstungsrate:1,350 kg/h (3,000 lb/h)

Gesamte Wärmeübertragungsfläche:18 m² (194 ft²) surface area

Druck:3 bar (43,5 psi)

Temperatur:160 °C (320 °F)

Material:Edelstahl 316

Zustand:Gebraucht

Buy Used Rising/Falling Film Evaporators for Sale by Condition

IPP stocks rising and falling film evaporators in used condition. All units were previously installed in production service, inspected on intake, and are offered with traceable provenance at meaningful savings versus new OEM pricing.

Gebrauchte Steig-/Fallfilmverdampfer zu verkaufen

Good used rising and falling film evaporators represent the full inventory position at IPP. These units were previously installed in production service, inspected on intake, and are offered as-is at meaningful savings while retaining OEM tube bundles, vapor bodies, and ancillary hardware.

Used PMS Titanium — 36,300 kg/h

Used Plant Maintenance Services Corp. (PMS) titanium rising/falling film evaporator with 36,300 kg/h (80,000 lb/h) evaporation rate and 1,450 m² (15,850 ft²) heat transfer surface area.

Zustand:Gebraucht

Verdunstungsrate:36,300 kg/h (80,000 lb/h)

Gesamte Wärmeübertragungsfläche:1,450 m² (15,850 ft²) surface area

Material:Titanium tubes, Inconel tubesheets

Vakuum:Vacuum rated, vertical

Used Wiegand SS Austenitic — 14,000 kg/h

Used Wiegand Stainless Steel Austenitic rising/falling film evaporator with 14,000 kg/h (30,850 lb/h) evaporation rate and 696 m² (7,500 ft²) heat transfer surface area.

Zustand:Gebraucht

Verdunstungsrate:14,000 kg/h (30,850 lb/h)

Gesamte Wärmeübertragungsfläche:696 m² (7,500 ft²) surface area

Material:Edelstahl austenitisch

Vakuum:Vacuum rated, vertical

Used Paget Equipment SS 304 — 2,250 kg/h

Used Paget Equipment Stainless Steel 304 rising/falling film evaporator with 2,250 kg/h (5,000 lb/h) evaporation rate and 67.4 m² (725 ft²) heat transfer surface area.

Zustand:Gebraucht

Verdunstungsrate:2,250 kg/h (5,000 lb/h)

Gesamte Wärmeübertragungsfläche:67.4 m² (725 ft²) surface area

Druck:10,3 bar (150 psi)

Temperatur:232.2 °C (450 °F)

Vakuum:Vacuum rated, vertical

Ready to Buy a Used Rising/Falling Film Evaporator?

Tell us your specifications and requirements. Our team will match your needs against current rising and falling film evaporator inventory and provide a detailed quote.

Buying Used Rising/Falling Film Evaporators vs Buying New

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Here is how used and new rising/falling film evaporators compare across key factors.

Faktor	Verwendet von IPP	Neu (OEM)
Ausrüstungskosten	Erhebliche Einsparungen gegenüber dem Neupreis des Originalherstellers	Vollständiger OEM-Listenpreis
Lieferzeit	Lagerware, versandbereit	Verlängerte Lieferzeiten (Neubau)
Materialien	Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321	Kundenspezifisch
Druckwerte	0.97 bar (14 psi) to 10.3 bar (150 psi)	Maßgefertigt nach Kundenspezifikation
Hersteller	Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox and others	Einzel-OEM
Umweltauswirkungen	Verlängert die Lebensdauer der Geräte, reduziert Abfall	Verbrauch neuer Rohstoffe

Advantages of Buying Used Rising/Falling Film Evaporators from IPP

International Process Plants vereint über 46 Jahre Erfahrung im Bereich Prozessanlagen, fast 150 Mitarbeiter in 15 Ländern und einen Bestand von 15.000 Prozesssystemen und wichtigen Anlagenteilen, um Reaktoren zu liefern, die für Ihren Prozess geeignet sind.

Erhebliche Kosteneinsparungen

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new.

Sofortige Verfügbarkeit

In-stock rising/falling film evaporators from IPP are ready to ship. IPP's GPS subsidiary also provides custom-built new equipment with 12–16 week average delivery.

Mehrere OEM-Hersteller

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel and other manufacturers. Every unit is an original OEM product with traceable provenance.

Qualität & Sanierung

IPP bietet über seine 1995 gegründete Division UGE (Universal Glasteel Equipment) Überholungsdienstleistungen an, die über 700 Behälter und mehr als 2.700 Ersatzteile verfügt.

Globale Präsenz in 15 Ländern

IPP unterhält Büros in 15 Ländern: Brasilien, Kanada, China, Tschechien, Frankreich, Deutschland, Indien, Italien, Mexiko, Pakistan, Portugal, Rumänien, Türkei, Großbritannien und den USA. IPP betreut weltweit über 160.000 Kunden.

Vollständiges Sortiment an Materialien und Spezifikationen

IPP stocks rising/falling film evaporators across a wide range of specifications to match your process requirements.

How Buying a Used Rising/Falling Film Evaporator Works

The process of purchasing used rising/falling film evaporators from IPP follows five steps, from specification to delivery.

1

Anforderungen einreichen

Teilen Sie uns Ihre Spezifikationen mit: Kapazität, Material, Druckstufe, Temperatur und Anwendung. Oder durchsuchen Sie unseren Bestand.

2

Datenpaket empfangen

IPP sendet ein detailliertes Datenblatt der Ausrüstung mit Spezifikationen, Abmessungen, Zustandsbericht und Fotos.

3

Überprüfen Sie die Ausrüstung

Kontaktieren Sie IPP, um einen Vor-Ort-Besuch zu vereinbaren oder eine Live-Video-Besichtigung mit einem IPP-Spezialisten an einem unserer weltweiten Standorte anzufordern.

4

Sanierungsoptionen

IPP bietet über seine UGE-Abteilung (über 700 Schiffe, über 2.700 Ersatzteile auf Lager) Überholungsdienstleistungen an. Kontaktieren Sie IPP für weitere Informationen zu zusätzlichen Dienstleistungen.

5

Verpackung & Lieferung

IPP koordiniert Verpackung, Kistenbau, Transport und Lieferung zu Ihrem Werksstandort. Weltweiter Versand von Niederlassungen in 15 Ländern.

Industries That Buy Used Rising/Falling Film Evaporators

IPP supplies used rising/falling film evaporators to manufacturers across multiple process industries worldwide.

Chemische Verarbeitung

Pharmazeutische

Speisen und Getränke

Molkerei

Petrochemie

Umwelt

Biotechnologie

Zellstoff und Papier

Farben und Lacke

Petrochemie

Frequently Asked Questions About Buying Used Rising/Falling Film Evaporators

Answers to the most common questions from procurement and operations teams evaluating used rising and falling film evaporators.

How many rising/falling film evaporators does IPP have in stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Available in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Browse the IMS inventory for current availability.

What condition grades are available for used rising/falling film evaporators?

IPP stocks rising/falling film evaporators in multiple conditions: Used. Durchstöbern Sie den aktuellen Bestand, um die verfügbaren Zustandsoptionen zu ermitteln.

Does IPP sell new rising/falling film evaporators as well as used?

Ja. IPP stocks new rising/falling film evaporators through its Gale Process Solutions (GPS) subsidiary, which provides custom-built equipment with 12–16 week average delivery. Für Einzelheiten zum neuen Lagerbestand wenden Sie sich bitte an IPP.

Welche Baumaterialien stehen zur Verfügung?

IPP stocks rising/falling film evaporators in Stainless Steel 316, Stainless Steel Austenitic, Stainless Steel 304, Stainless Steel 321 construction. Wenden Sie sich an IPP, um die Materialanforderungen für Ihre Bewerbung zu besprechen.

What manufacturers of rising/falling film evaporators does IPP stock?

IPP stocks rising/falling film evaporators from Kleiser Gmbh, Pitton-Gessner/Germany, Buflovak/Blaw Knox, Betchel, DeSmet and other manufacturers. Durchstöbern Sie den aktuellen Lagerbestand, um die verfügbaren Hersteller zu sehen.

How much can I save buying used rising/falling film evaporators versus new?

Buying used rising/falling film evaporators from IPP can save up to 50% of capital and 90% of lead time versus buying new. Die genauen Einsparungen hängen von Hersteller, Kapazität, Material und Zustand ab. Kontaktieren Sie IPP für Preisinformationen zu einzelnen Geräten.

How long does it take to receive rising/falling film evaporators from IPP?

In-stock rising/falling film evaporators are ready to ship. Die GPS-Tochtergesellschaft von IPP bietet neue, kundenspezifisch gefertigte Geräte mit einer durchschnittlichen Lieferzeit von 12 bis 16 Wochen an. IPP versendet Waren aus Niederlassungen in 15 Ländern weltweit.

Übernimmt IPP Versand und Frachtabwicklung?

IPP koordiniert Verpackung, Kistenbau, Transport und Lieferung zu Ihrem Werksstandort. Mit Niederlassungen in 15 Ländern Und Weltweit bedienen wir mehr als 160.000 Kunden., IPP verfügt über umfangreiche Erfahrung in der globalen Ausrüstungslogistik.

Weitere Teile und Ausrüstung von IPP

In addition to rising/falling film evaporators, IPP stocks equipment across multiple categories for complete process solutions.

Wärmetauscher

Reaktoren

Panzer

Looking for New Rising/Falling Film Evaporators?

Die IPP Group liefert Neuanlagen über ihre Tochtergesellschaft Gale Process Solutions (GPS), die kundenspezifische Anlagen mit einer durchschnittlichen Lieferzeit von 12–16 Wochen anbietet. Über ihre Division UGE (Universal Glasteel Equipment) bietet IPP außerdem wiederverglaste Anlagen an.

Ready to Buy Rising/Falling Film Evaporators?

IPP liefert seit 1980 weltweit hochwertige Prozessanlagen und betreut über 160.000 Kunden. Teilen Sie uns Ihre Anforderungen mit – unser Team meldet sich umgehend mit passenden Produkten und Preisen.