Buy Used Process & Industrial Filters for Sale

Buying used process and industrial filters through International Process Plants gives chemical, pharmaceutical, food and beverage, and environmental manufacturers access to pressure leaf filters, Rosenmund & Cogiem filter dryers, and nutsche filters with filtration areas from 0.03 m² to 80 m² in stainless steel, Hastelloy, and glass-lined construction. Buying used can save up to 50% of capital and 90% of lead time versus buying new. ▶

Materials of construction include stainless steel 316, 316L, 304, 321, Hastelloy C-22 and C-276, and glass-lined. Filtration areas range from 0.03 m² (0.32 ft²) to 80 m² (861 ft²). Internal pressure ratings range from 2 bar (29 psi) to 27.6 bar (400 psi). Jacketed options are available across the inventory for temperature-controlled filtration operations.

IPP stocks process and industrial filters with multiple formats to match flow rate and solids content, jacketed options for temperature-sensitive operations, and ASME code-rated vessels for pressure applications. Options include automated cake discharge and backflushing. Condition options include good used, unused, and new. Buying used filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. ▲

3

Filter Subtypes

1980

تأسست منذ

15

الدول التي لديها مكاتب

Pressure Leaf Filters

Sparkler, Schenk, Chemap & more

Rosenmund & Cogiem Filter Dryers

3V Cogeim, Guedu, GL Filtrations & more

مرشحات نوتشي

Pfaudler, Seitz-Werke, JENS OLSEN & more

Buy Used Industrial and Process Filters by Type

IPP stocks industrial filters across three subtypes: pressure leaf, Rosenmund & Cogiem filter dryers, and nutsche filters. Select a filter type below to view featured inventory.

Buy Used Pressure Leaf Filters for Sale

Pressure leaf filters offer continuous, enclosed operation ideal for fine filtration. IPP stocks pressure leaf filters from manufacturers including Sparkler, Schenk, Chemap, Gale Process Solutions, and more. Available in stainless steel 316, 316L, 304, 321, and austenitic grades.

Diessel Hildesheim SS 316L — 2.2 m²

Used Diessel Hildesheim stainless steel 316L horizontal pressure leaf filter with 2.2 m² (24 ft²) filtration area and vacuum capability.

منطقة الترشيح:2.2 m² (24 ft²) filtration area

ضغط:6 بار (87 رطل لكل بوصة مربعة)

درجة حرارة:148.9 درجة مئوية (300 درجة فهرنهايت)

مكنسة:قادر على التنظيف بالمكنسة الكهربائية الكاملة

سترة:نعم

Jacket Type:Standard

تصميم السترة:الفولاذ المقاوم للصدأ 316L

توجيه:Horizontal

القطر:508 mm (20 in) dia.

Gale Process Solutions BPEFP — 2.4 m²

New Gale Process Solutions stainless steel 316 vertical pressure leaf filter with 2.4 m² (25.8 ft²) filtration area and 15 horizontal plates.

منطقة الترشيح:2.4 m² (25.8 ft²) filtration area

ضغط:3.4 bar (49.7 psi)

درجة حرارة:120°C (248°F)

Number of Filter Elements:15 horizontal plates + 1 scavenger

سترة:نعم

Jacket Type:Standard

تصميم السترة:الفولاذ المقاوم للصدأ 304

نوع الدعم:رَأسِيّ

توجيه:skid-mounted on casters

Schenk ZHF-SR10KL — 4.7 m²

Used Schenk stainless steel austenitic pressure leaf filter with 4.7 m² (50.6 ft²) filtration area and 11 kW (14.8 HP) motor.

منطقة الترشيح:4.7 m² (50.6 ft²) filtration area

ضغط:6 بار (87 رطل لكل بوصة مربعة)

درجة حرارة:150 درجة مئوية (302 درجة فهرنهايت)

قوة المحرك:11 kW (14.8 HP) motor

سترة:نعم

Jacket Type:Half Pipe/Limpet

القطر:805 mm (31.7 in) dia.

نوع الدعم:on legs

Buy Used Rosenmund & Cogiem Filter Dryers for Sale

Rosenmund & Cogiem filter dryers combine filtration and drying in a single enclosed vessel, reducing product transfer and contamination risk. IPP stocks Rosenmund & Cogiem filter dryers from manufacturers including 3V Cogeim, Guedu, GL Filtrations, Rosenmund, and more. Available in stainless steel 316, 321, Hastelloy C-22, and austenitic grades.

3V Cogeim FiltoDry FEPXD 400 — 4.2 m²

Used 3V Cogeim Hastelloy C-22 filter dryer with 4.2 m² (44.7 ft²) filtration area, hydraulic agitator drive, CIP capability, and dust filter.

منطقة الترشيح:4.2 m² (44.7 ft²) filtration area

ضغط:6.1 bar (88.5 psi)

درجة حرارة:200 درجة مئوية (392 درجة فهرنهايت)

قوة المحرك:29.8 kW (40 HP)

نوع ختم التحريك:مانع تسرب ميكانيكي

سترة:Half pipe/limpet jacket

Jacket Type:SS 316

القطر:2,300 mm (90.6 in) dia.

Overall Height:CIP equipped

Guedu Filtre Pilote SS 316 — 0.37 m²

Used Guedu stainless steel 316 pilot-scale filter dryer with 0.37 m² (4 ft²) filtration area, 102.2 L (27 gal) vessel capacity, and mechanical seal agitation.

منطقة الترشيح:0.37 m² (4 ft²)

Vessel Liquid Capacity:102.2 L (27 gal)

ضغط:3 bar (44 psi)

درجة حرارة:165°C (329°F)

قوة المحرك:2.2 kW (3 HP)

نوع ختم التحريك:مانع تسرب ميكانيكي

سترة:نعم

Jacket Type:Standard

تصميم السترة:الفولاذ المقاوم للصدأ 316

Intenal Finish:Buff polish

Removable Bottom:removable bottom

GL Filtrations FD350 Hastelloy C-22 — 0.1 m²

Used GL Filtrations Hastelloy C-22 lab-scale filter dryer with 0.1 m² (1.08 ft²) filtration area, double mechanical seal, and vacuum capability.

منطقة الترشيح:0.1 m² (1.08 ft²) filtration area

ضغط:6 بار (87 رطل لكل بوصة مربعة)

درجة حرارة:160 درجة مئوية (320 درجة فهرنهايت)

مكنسة:vacuum

نوع ختم التحريك:ختم ميكانيكي مزدوج

سترة:نعم

Jacket Type:Standard

تصميم السترة:الفولاذ المقاوم للصدأ 316L

Agitator Cored for Heating/Cooling:Cored agitator

Dust Filter:dust filter equipped

Buy Used Nutsche Filters for Sale

Nutsche filters provide batch solid-liquid separation in a single pressure or vacuum vessel, commonly used for pharmaceutical intermediates, APIs, and fine chemical applications. IPP stocks nutsche filters from manufacturers including Pfaudler, Seitz-Werke, JENS OLSEN, and Wollner & Platz. Available in stainless steel 316, austenitic stainless steel, and glass-lined construction.

Seitz-Werke 60/1 SS Austenitic — 0.3 m²

Used Seitz-Werke stainless steel austenitic nutsche filter with 0.3 m² (3.2 ft²) filtration area, 0.12 m³ (4.2 ft³) cake volume, and half pipe/limpet jacket.

منطقة الترشيح:0.3 m² (3.2 ft²)

Cake Volume:0.12 m³ cake vol.

ضغط:6 بار (87 رطل لكل بوصة مربعة)

درجة حرارة:143°C (289.4°F)

سترة:Half pipe/limpet jacket

Jacket Type:SS Austenitic

Top Head Type:Dish top (welded)

Bottom Head Type:flat bottom (bolted)

نوع الدعم:On legs

Support Details:steel base with casters

Pfaudler Glass-Lined Nutsche — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, elliptical heads, and high-temperature/high-pressure jacket.

منطقة الترشيح:0.52 m² (5.6 ft²) filtration area

ضغط:3.4 بار (50 رطل لكل بوصة مربعة)

درجة حرارة:232.2 درجة مئوية (450 درجة فهرنهايت)

ضغط الغلاف:Jacket: 10.3 bar (150 psi)

درجة حرارة السترة:232.2°C

Top Head Type:Elliptical heads

Bottom Head Type:glass-lined MOC

القطر:813 mm (32 in) dia.

توجيه:vertical

JENS OLSEN SS 316 — 2.8 m²

Used JENS OLSEN stainless steel 316 nutsche filter with 2.8 m² (29.6 ft²) filtration area, vacuum capability, and jacketed construction.

منطقة الترشيح:2.8 m² (29.6 ft²) filtration area

ضغط:2 بار (29 رطل لكل بوصة مربعة)

درجة حرارة:134°C (273.2°F)

مكنسة:vacuum

سترة:نعم

ضغط الغلاف:2 بار (29 رطل لكل بوصة مربعة)

درجة حرارة السترة:134 °C (273.2 °F)

Top Head Type:Dish top (welded)

Bottom Head Type:dish bottom (bolted)

القطر:1,900 mm (74.8 in) dia.

طول الجانب المستقيم:1,000 mm (39.4 in) SSL

Need a Filter? Ask an IPP Expert.

Tell us your filtration area, material, pressure, and temperature requirements. Our team will match your specifications against current filter inventory and provide a detailed quote.

Comparing 3 Filter Types Available from IPP

IPP stocks three subtypes of industrial filters. Use the comparison below to identify the best filter type for your process requirements.

Feature	Pressure Leaf	Rosenmund & Cogiem	Nutsche
Stock Position	Deepest position	Strong position	Available
Primary Function	Continuous enclosed filtration	Combined filtration & drying	Batch solid-liquid separation
المواد المتاحة	SS 316, 316L, 304, 321, Austenitic	SS 316, 321, Hastelloy C-22	SS 316, Austenitic, Glass-lined
Filtration Area Range	0.28 – 80 m² (3 – 861 ft²)	0.03 – 6 m² (0.32 – 64.6 ft²)	0.3 – 6 m² (3.2 – 64.6 ft²)
Agitation	Select models with cake discharge	Standard — hydraulic or electric drive	Available on select units
Drying Capability	No	Yes — heated agitator & jacket	Via jacket heating only
Jacket Options	Half pipe/limpet & standard	Half pipe/limpet & standard	Half pipe/limpet & standard
Key Manufacturers	Sparkler, Schenk, Chemap, GPS	3V Cogeim, Guedu, GL Filtrations	Pfaudler, Seitz-Werke, JENS OLSEN

Buy Used Filters for Sale by Manufacturer

PP stocks filters from a wide range of OEM manufacturers, with Schenk, Sparkler, and Rosenmund representing the deepest positions in our inventory. Buying from the original equipment manufacturer helps ensure compatibility with existing plant infrastructure, replacement parts, and operator familiarity.

Buy Used Schenk Filters for Sale

Schenk is the deepest single-manufacturer position in IPP’s filter inventory, spanning both pressure leaf filters and Rosenmund & Cogiem filter dryers. Available models include ZHF and ZPF series units in used condition.

Schenk ZHF-SR10KL — 4.7 m²

Used Schenk stainless steel austenitic pressure leaf filter with 4.7 m² (50.6 ft²) filtration area and 11 kW (14.8 HP) motor.

مادة:الفولاذ المقاوم للصدأ الأوستنيتي

منطقة الترشيح:4.7 m² (50.6 ft²) filtration area

ضغط:6 بار (87 رطل لكل بوصة مربعة)

درجة حرارة:150 درجة مئوية (302 درجة فهرنهايت)

قوة المحرك:11 kW (14.8 HP) motor

حالة:حالة مستعملة

Schenk Pressure Leaf — 15 m²

Used Schenk stainless steel austenitic pressure leaf filter with 15 m² (161.5 ft²) filtration area for high-capacity continuous filtration.

مادة:الفولاذ المقاوم للصدأ الأوستنيتي

منطقة الترشيح:15 m² (161.5 ft²) filtration area

النوع الفرعي:Pressure leaf type

حالة:حالة مستعملة

Schenk Pressure Leaf — 28.8 m²

Used Schenk stainless steel 304 pressure leaf filter with 28.8 m² (310 ft²) filtration area for large-scale industrial operations.

مادة:الفولاذ المقاوم للصدأ 304

منطقة الترشيح:28.8 m² (310 ft²) filtration area

النوع الفرعي:Pressure leaf type

حالة:حالة مستعملة

Buy Used Sparkler Filters for Sale

Sparkler is one of the deepest OEM positions in IPP’s pressure leaf filter inventory. Available models include the D-series and other horizontal and vertical configurations.

Sparkler 18 D 12 SS 316 — 2 m²

Used Sparkler stainless steel 316 pressure leaf filter model 18 D 12 with 2 m² (22 ft²) filtration area.

مادة:الفولاذ المقاوم للصدأ 316

منطقة الترشيح:2 m² (22 ft²) filtration area

نموذج:Model 18 D 12

حالة:حالة مستعملة

Sparkler SS 304 — 0.58 m²

Used Sparkler stainless steel 304 pressure leaf filter with 0.58 m² (6.2 ft²) filtration area for smaller-scale operations.

مادة:الفولاذ المقاوم للصدأ 304

منطقة الترشيح:0.58 m² (6.2 ft²) filtration area

حالة:حالة مستعملة

Sparkler SS 304 — 1.02 m²

Used Sparkler stainless steel 304 pressure leaf filter with 1.02 m² (11 ft²) filtration area.

مادة:الفولاذ المقاوم للصدأ 304

منطقة الترشيح:1.02 m² (11 ft²) filtration area

حالة:حالة مستعملة

Buy Used Rosenmund Filter Dryers for Sale

Rosenmund is one of the deepest OEM positions in IPP’s filter dryer inventory. Available in stainless steel 316 and Hastelloy C-22, with filtration areas from 0.25 m² to 8 m².

Rosenmund B88-RF-1513 SS 316 — 0.6 m²

Used Rosenmund stainless steel 316 filter dryer model B88-RF-1513 with 0.6 m² (6.5 ft²) filtration area and agitated vessel.

مادة:الفولاذ المقاوم للصدأ 316

منطقة الترشيح:0.6 m² (6.5 ft²) filtration area

نموذج:Model B88-RF-1513

الاضطراب:Agitated, hydraulic drive

حالة:حالة مستعملة

Rosenmund AG Hastelloy C-22 — 0.25 m²

Used Rosenmund AG Hastelloy C-22 filter dryer with 0.25 m² (2.7 ft²) filtration area for corrosion-resistant pharmaceutical and fine chemical applications.

مادة:Hastelloy C-22

منطقة الترشيح:0.25 m² (2.7 ft²) filtration area

النوع الفرعي:Rosenmund filter dryer

حالة:حالة مستعملة

Rosenmund SS 316 — 8 m²

Used Rosenmund stainless steel 316 filter dryer with 8 m² (86.1 ft²) filtration area for production-scale combined filtration and drying.

مادة:الفولاذ المقاوم للصدأ 316

منطقة الترشيح:8 m² (86.1 ft²) filtration area

النوع الفرعي:Rosenmund filter dryer

حالة:حالة مستعملة

Buy Used Filters from Other OEM Manufacturers

Beyond Schenk, Sparkler, and Rosenmund, IPP stocks filters from 3V Cogeim, Chemap, Pfaudler, Artisan, BHS, Bertrams, Seitz, and many other OEM manufacturers.

3V Cogeim FEPXD 400 Hastelloy — 4.2 m²

Used 3V Cogeim Hastelloy C-22 filter dryer with 4.2 m² (44.7 ft²) filtration area, hydraulic agitator drive, CIP capability, and dust filter.

مادة:Hastelloy C-22

منطقة الترشيح:4.2 m² (44.7 ft²) filtration area

الاضطراب:Agitated

CIP:CIP equipped

حالة:حالة مستعملة

Chemap SS 316 — 3 m²

Used Chemap stainless steel 316 pressure leaf filter with 3 m² (32.3 ft²) filtration area.

مادة:الفولاذ المقاوم للصدأ 316

منطقة الترشيح:3 m² (32.3 ft²) filtration area

النوع الفرعي:Pressure leaf type

حالة:حالة مستعملة

Pfaudler Glass-Lined Nutsche — 0.52 m²

Used Pfaudler glass-lined nutsche filter with 0.52 m² (5.6 ft²) filtration area, elliptical heads, and high-temperature/high-pressure jacket.

مادة:بناء مبطن بالزجاج

منطقة الترشيح:0.52 m² (5.6 ft²) filtration area

سترة:Jacketed for temperature control

حالة:حالة مستعملة

Buy Used Filters for Sale by Condition

توفر شركة IPP أجهزة تبريد مستعملة وغير مستعملة وجديدة. اختر الحالة التي تناسب ميزانيتك وجدولك الزمني ومتطلبات الأداء.

Buy Used Filters for Sale

Good used filters are the deepest condition position in IPP’s inventory. These units were previously installed in production service, inspected on intake, and are offered as-is at the lowest price point while retaining OEM construction and engineering.

Used 3V Cogeim FEPXD 400 — 4.2 m²

Used 3V Cogeim Hastelloy C-22 filter dryer with 4.2 m² (44.7 ft²) filtration area, hydraulic agitator drive, CIP capability, and dust filter.

حالة:حالة مستعملة

مادة:Hastelloy C-22

منطقة الترشيح:4.2 m² (44.7 ft²) filtration area

ضغط:6.1 bar (88.5 psi)

درجة حرارة:200 درجة مئوية (392 درجة فهرنهايت)

CIP:CIP equipped

Dust Filter:dust filter

Used Schenk ZHF-SR10KL — 4.7 m²

Used Schenk stainless steel austenitic pressure leaf filter with 4.7 m² (50.6 ft²) filtration area and 11 kW (14.8 HP) motor.

حالة:حالة مستعملة

مادة:الفولاذ المقاوم للصدأ الأوستنيتي

منطقة الترشيح:4.7 m² (50.6 ft²) filtration area

قوة المحرك:11 kW (14.8 HP) motor

ضغط:6 بار (87 رطل لكل بوصة مربعة)

درجة حرارة:150 درجة مئوية (302 درجة فهرنهايت)

Used Seitz-Werke 60/1 SS Austenitic — 0.3 m²

Used Seitz-Werke stainless steel austenitic nutsche filter with 0.3 m² (3.2 ft²) filtration area, 0.12 m³ cake volume, and half pipe/limpet jacket.

حالة:حالة مستعملة

مادة:الفولاذ المقاوم للصدأ الأوستنيتي

منطقة الترشيح:0.3 m² (3.2 ft²) filtration area

ضغط:6 بار (87 رطل لكل بوصة مربعة)

درجة حرارة:143°C (289.4°F)

سترة:Half pipe/limpet jacket

Buy Unused Surplus Filters for Sale

Unused surplus filters were manufactured but never installed in production service. These units offer new-equipment performance and condition with immediate availability and pricing below new OEM cost.

Unused Chemieanlagebau SS 316 — 8 m²

Unused Chemieanlagebau Stassfurt stainless steel 316 pressure leaf filter with 8 m² (86.1 ft²) filtration area, 5.9 bar pressure rating, and 160°C temperature rating.

حالة:حالة غير مستخدمة

مادة:الفولاذ المقاوم للصدأ 316

منطقة الترشيح:8 m² (86.1 ft²) filtration area

ضغط:5.9 bar (86 psi)

درجة حرارة:160 درجة مئوية (320 درجة فهرنهايت)

Unused Chemap A10 SS 304 — 10 m²

Unused Chemap stainless steel 304 pressure leaf filter model A10 with 10 m² (107.6 ft²) filtration area, 5 bar pressure rating.

حالة:حالة غير مستخدمة

مادة:الفولاذ المقاوم للصدأ 304

منطقة الترشيح:10 m² (107.6 ft²) filtration area

ضغط:5 bar (72.5 psi)

درجة حرارة:100 درجة مئوية (212 درجة فهرنهايت)

Unused Chemap A18 SS 316L — 18 m²

Unused Chemap stainless steel 316L pressure leaf filter model A18 with 18 m² (193.8 ft²) filtration area, 5 bar pressure rating.

حالة:حالة غير مستخدمة

مادة:الفولاذ المقاوم للصدأ 316L

منطقة الترشيح:18 m² (193.8 ft²) filtration area

ضغط:5 bar (72.5 psi)

درجة حرارة:100 درجة مئوية (212 درجة فهرنهايت)

Buy New Filters for Sale

IPP stocks new filters from its Gale Process Solutions (GPS) subsidiary. GPS provides custom fabricated equipment with 12–16 week average delivery.

Gale Process Solutions BPEFP — 2.4 m²

New Gale Process Solutions stainless steel 316 vertical pressure leaf filter with 2.4 m² (25. ft²) filtration area and 15 horizontal plates.

حالة:حالة جديدة

مادة:الفولاذ المقاوم للصدأ 316

منطقة الترشيح:2.4 m² (25.8 ft²) filtration area

ضغط:3.4 bar (49.7 psi)

درجة حرارة:120°C (248°F)

Number of Filter Elements:15 horizontal plates + 1 scavenger

Advantages of Buying Used Filters from IPP

International Process Plants combines over 46 years of process equipment expertise, nearly 150 colleagues across 15 countries, and an inventory of 15,000 process systems and major equipment pieces to deliver industrial filters ready for your process.

توفير كبير في التكاليف

Buying used filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. With filters across three subtypes, IPP offers a wide selection to match your budget and specifications.

التوفر الفوري

In-stock filters from IPP are ready to ship. New OEM filters require extended lead times for engineering, procurement, and fabrication. IPP's GPS subsidiary also provides custom fabricated new equipment with 12–16 week average delivery.

العديد من مصنعي المعدات الأصلية

IPP stocks filters from Sparkler, Schenk, 3V Cogeim, Pfaudler, Gale Process Solutions, Chemap, and many additional manufacturers. Every unit is an original OEM product with traceable provenance.

Three Filter Subtypes

IPP stocks pressure leaf filters for continuous fine filtration, Rosenmund & Cogiem filter dryers for combined filtration and drying, and nutsche filters for batch solid-liquid separation. Each subtype serves different process requirements and applications.

حضور عالمي في 15 دولة

تدير شركة IPP مكاتب في 15 دولة: البرازيل، كندا، الصين، جمهورية التشيك، فرنسا، ألمانيا، الهند، إيطاليا، المكسيك، باكستان، البرتغال، رومانيا، تركيا، المملكة المتحدة، والولايات المتحدة. وقد خدمت IPP أكثر من 160,000 عميل حول العالم.

مجموعة كاملة من المواد والمواصفات

Materials include stainless steel 316, 316L, 304, Hastelloy C-22, and glass-lined. Filtration areas from 0.03 m² (0.32 ft²) to 80 m² (861 ft²). Pressure ratings from 2 bar (29 psi) to 27.6 bar (400 psi). Jacketed options available across all subtypes.

How Buying a Used Filter Works

The process of purchasing a used industrial filter from IPP follows five steps, from specification to delivery.

1

تقديم المتطلبات

Share your filter specifications: filtration area, material of construction, pressure rating, temperature, and application. Or browse our searchable inventory.

2

استلام حزمة البيانات

IPP sends a detailed equipment data sheet with filtration area, pressure rating, temperature, dimensions, jacket specifications, and condition report with photographs.

3

افحص المعدات

اتصل بشركة IPP لترتيب زيارة ميدانية أو لطلب جولة فيديو مباشرة للمفاعل مع أحد أعضاء فريق IPP في أحد مواقعنا العالمية.

4

خيارات التجديد

IPP offers refurbishment services including new filter media, gasket replacement, and surface reconditioning. Contact IPP for details on specific equipment.

5

التعبئة والتغليف والتسليم

تتولى شركة IPP تنسيق عمليات التعبئة والتغليف والشحن والتوصيل إلى موقع مصنعك. نوفر خدمة الشحن إلى جميع أنحاء العالم من مكاتبنا المنتشرة في 15 دولة. تواصل مع IPP لمعرفة تفاصيل الشحن.

Browse All Filter Types from IPP

IPP stocks industrial filters across three specialized subtypes. Click below to browse the full inventory for each filter type.

Rosenmund & Cogiem Filter Dryers

Pressure Leaf Filters

مرشحات نوتشي

الصناعات التي تشتري أجهزة الطرد المركزي المستعملة

تزود شركة IPP المصنّعين والمعالجين في مختلف الصناعات حول العالم بأجهزة الطرد المركزي المستعملة.

المعالجة الكيميائية

الصيدلة

الأطعمة والمشروبات

Environmental & Wastewater

التكنولوجيا الحيوية

المواد الكيميائية الدقيقة

المواد الكيميائية الزراعية

مستحضرات التجميل

البتروكيماويات

البوليمرات والراتنجات

مستحضرات التجميل (تطبيقات مزج التركيبات الأساسية أو السائبة المختارة)

التطبيقات الصيدلانية (غير المعقمة، وغير المتوافقة مع ممارسات التصنيع الجيدة، أو تطبيقات معالجة المواد الصلبة السائبة والوسيطة)

التكنولوجيا الحيوية (تطبيقات محدودة لمعالجة المواد المساعدة غير المعقمة وغير القائمة على زراعة الخلايا)

Frequently Asked Questions About Buying Used Filters

Answers to the most common questions from procurement and operations teams evaluating used industrial filters.

How many used filters does IPP have in stock?

IPP stocks industrial filters across three subtypes: pressure leaf filters, Rosenmund & Cogiem filter dryers, and nutsche filters. Manufacturers include Sparkler, Schenk, 3V Cogeim, Pfaudler, Gale Process Solutions, and more. تصفح مخزون نظام إدارة المعلومات (IMS) للاطلاع على التوافر الحالي.

What condition grades are available for used filters?

IPP stocks filters in multiple conditions: good used, unused surplus, and new. New filters include custom-built units from IPP's Gale Process Solutions subsidiary. Unused filters were manufactured but never installed, offering new-equipment performance with immediate availability.

What manufacturers of filters does IPP stock?

IPP stocks filters from a wide range of manufacturers including Sparkler, Schenk, 3V Cogeim, Pfaudler, Gale Process Solutions, Chemap, Alloy Fab, Durco, Guedu, GL Filtrations, Seitz-Werke, JENS OLSEN, Diessel Hildesheim, and others. تصفح المخزون الحالي للاطلاع على الشركات المصنعة المتاحة.

Does IPP sell new filters as well as used?

نعم. IPP stocks new filters, primarily from its Gale Process Solutions (GPS) subsidiary. توفر شركة GPS معدات مصنعة حسب الطلب مع متوسط فترة تسليم تتراوح بين 12 و 16 أسبوعًا. Contact IPP for details on new and unused inventory.

What is the difference between pressure leaf and nutsche filters?

Pressure leaf filters offer continuous, enclosed operation ideal for fine filtration with centrifugal or wet cake discharge. Nutsche filters operate as batch pressure or vacuum vessels for solid-liquid separation, commonly used for pharmaceutical intermediates and fine chemicals. IPP stocks both pressure leaf and nutsche filters.

What is a Rosenmund & Cogiem filter dryer?

Rosenmund & Cogiem filter dryers combine filtration and drying in a single enclosed, agitated vessel. They feature heated agitators and jackets that allow the product to be filtered, washed, and dried without transfer between equipment, reducing contamination risk and product loss. IPP stocks Rosenmund & Cogiem filter dryers from manufacturers including 3V Cogeim, Guedu, and GL Filtrations.

Are used filters suitable for pharmaceutical or food processing?

Yes — many are built to sanitary standards and can be revalidated or retrofitted with new filter media and gaskets. Select units feature sanitary-grade surface finishes including Ra 0.5 and buff polish.

What factors should I consider when selecting a filter?

Key factors include particle size, solids concentration, flow rate, operating pressure, temperature, and chemical compatibility. Additionally, consider whether you need combined drying capability (Rosenmund & Cogiem), continuous operation (pressure leaf), or batch vacuum filtration (nutsche). Contact IPP to discuss your specific process requirements.

What filtration area range is available?

IPP stocks filters with filtration areas from 0.03 m² (0.32 ft²) for laboratory-scale applications up to 80 m² (861 ft²) for large production operations. Pressure leaf filters offer the largest filtration areas, while Rosenmund & Cogiem and nutsche filters are available in smaller to mid-range sizes. Contact IPP with your filtration area requirements.

ما هي مواد البناء المتاحة؟

IPP stocks filters in stainless steel 316, 316L, 304, 321, and austenitic grades, Hastelloy C-22 and C-276, and glass-lined construction. Stainless steel serves sanitary, pharmaceutical, and food-grade use. Hastelloy serves aggressive media or high-purity applications. Glass-lined provides corrosion resistance for reactive chemicals.

What pressure and temperature ratings are available?

Internal pressure ratings across IPP's filter inventory range from 2 bar (29 psi) to 27.6 bar (400 psi). Temperature ratings range from 20°C (68°F) to 315.6°C (600°F). Vacuum-capable units are available across all three filter subtypes. Contact IPP with your process pressure and temperature requirements.

Do IPP filters come with jackets for temperature control?

Yes. A majority of filters in IPP's inventory feature jackets for temperature-controlled filtration. Jacket types include half pipe/limpet and standard jackets. Jacket materials of construction include stainless steel 316, 316L, 304, and carbon steel. Rosenmund & Cogiem filter dryers additionally feature cored agitators for heating and cooling.

How much can I save buying a used filter versus new?

Buying used filters from IPP can save up to 50% of capital and 90% of lead time versus buying new. The exact savings depend on filter type, manufacturer, filtration area, material of construction, and condition. IPP provides detailed quotes with full specification matching on request.

How long does it take to receive a used filter from IPP?

In-stock filters are ready to ship. توفر شركة GPS التابعة لشركة IPP معدات جديدة مصنعة حسب الطلب بمتوسط مدة تسليم تتراوح بين 12 و 16 أسبوعًا. تقوم شركة IPP بالشحن من مكاتبها في 15 دولة حول العالم. Contact IPP for specific lead times on units of interest.

Can I visit IPP to inspect a filter before buying?

Contact IPP to arrange a visit or discuss inspection options for specific equipment. تدير شركة IPP مكاتب في 15 دولة: البرازيل، كندا، الصين، جمهورية التشيك، فرنسا، ألمانيا، الهند، إيطاليا، المكسيك، باكستان، البرتغال، رومانيا، تركيا، المملكة المتحدة، والولايات المتحدة.

Does IPP handle shipping and freight for filters?

تتولى شركة IPP تنسيق التعبئة والتغليف والشحن والتوصيل إلى موقع مصنعك. مع مكاتب في 15 دولة و أكثر من 160,000 عميل حول العالم, IPP has extensive experience in global equipment logistics. Contact IPP to discuss shipping and logistics for specific equipment.

What are the benefits of buying used process equipment from IPP?

IPP offers significant savings, reduced lead times, and global support based on more than 47 years of equipment expertise. IPP maintains an inventory of 15,000 process systems and major equipment pieces عير 20 global plant sites.

Ready to Buy a Used Filter?

تُقدّم شركة IPP معدات معالجة عالية الجودة في جميع أنحاء العالم منذ عام 1980، وتخدم أكثر من 160,000 عميل. أخبرنا باحتياجاتك، وسيقوم فريقنا بالرد عليك بعرض المنتجات المتوفرة لدينا وأسعارها المناسبة.